Itunes doesn't recognize ipod touch even after I download latest version

About a week ago my ipod touch froze on the apple logo screen. I found a way to reset the factory setting and then try something else (can't remember what it was) where the itunes logo shows up on the screen and you plug it into your computer. After I did that a message came up that said "The ipod "ipod touch" cannot be used because it requires itunes version 9.2 or later. Go to itunes.com to download the latest version of itunes". I did that and it still won't recognize it. I even downloaded the latest version of iTunes 3 times and after I plug my ipod in still the same message. I got this ipod touch as a Christmas gift in 2009. A friend of my mom's bought a car and it came with it. She didn't want it so she gave it to me. So, I'm not even sure which version it is. I've had no problems with it up until now. What do I need to do to get itunes to recognize my ipod? There's got to be more than downloaded the latest version several times- I know that's not good.

Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
I would start by removing and reinstalling all the Apple software using the instructions in the link.

Similar Messages

  • Itunes doesn't recognize Ipod Touch 4g

    I purchased my daughter a brand new Ipod Touch 4G last weekend.   When we connect the new Ipod Touch to my daughters computer, Itunes won't recognize her Ipod Touch.   However, I can attach her Ipod Touch to two other computers and it recognizes without problem.
    When I plug in the Ipod touch to her computer, it makes a noise indicating it has recognized something is plugged in but nothing is recognized in Itunes.
    And what is more strange is her computer will recognize four other Apple devices without problem (an I Phone 4G, an I Phone 3G, an I Pad 2 and a Ipod Touch 3G).
    I have completely gone through the recommended Ipod Touch Trouble Shooting steps 4 times now and have no success with the Ipod Touch recognized on my daughters computer.   I have completely removed all the Apple software (Bonjour, Itunes, Apple, etc.) and reinstalled.     I have even removed the anti virus software and it didn't help.
    I have also tried to completely erase the Ipod Touch holding down the Sleep Walk button and Home Button for 10 seconds.   After plugging in to her computer when indicated, I get an error message that the reset was not successful.
    It is so strange that her computer recognizes 4 other apple devices without problem and her Ipod touch is recognized by 2 other computers without problem.   There has to be a specific reason that it won't work on my daughters computer.
    Any suggestions beyond the Ipod Touch Trouble Shooting link?

    - First try placing the iPOd in recovery mode and resoring via iTunes on the computer: For recovery mode:
    iPhone and iPod touch: Unable to update or restore
    http://support.apple.com/kb/HT1808- Then it is time for an appountment at the Genius Bar of an Apple store.  Sounds like you have a defective iPod.

  • ITunes freezes when connecting iPod Touch - even after restored

    Hi,
    I have an iPod Touch 32GB 4th generation, I have never had any problems with it until now.
    Today I tried to connect it to my iTunes (on my MacBook Pro - late 2011 model) in order to sync it so that I could transfer some of my new music and iTunes would freeze. The mouse would pinwheel and I would have to force quit (it would not respond for over 30mins if left unattended). I created a new admin user and the itunes on the other user recognised the iPod just fine. I used the other user to restore my iPod in the hopes that when connected to my library again, it would be a 'new' ipod and so it would no longer freeze. Unfortunately this was not the case, despite my library recognising an ipod in recovery mode and being able to restore it (so that I can now at least use it in its most basic form). It has subsequently frozen each time I connect my iPod. How can I fix this? Should I just wait for the next iTunes upgrade?
    Thank you
    Frances

    Hi Frances,
    Welcome to Apple Support Communities!
    The sugestions in the article below should help. They will resolve most issues that cause iTunes to stop responding when an iOS device is connected to the computer.
    iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ts3219
    Symptoms
    In rare instances, iTunes may become unresponsive when connecting an iPhone, iPad or iPod touch to your computer. iTunes may become responsive again after you disconnect the device from the computer.
    Resolution
    Expand All Sections | Collapse All Sections
    Follow the steps below to troubleshoot the issue:
    Install any available software updates for your computer.
    For Mac OS X: Click the Apple () menu, choose Software Update, and follow the on-screen instructions.
    For Windows: Refer to the documentation for your computer for instructions on using Windows Update to update your computer.
    Update iTunes to the latest version.
    For Mac OS X: Click the Apple () menu, choose Software Update, and follow the on-screen instructions. You can also download iTunes from the Apple website.
    For Windows: Use Apple Software Update, or download iTunes from the Apple website.
    Test with automatic syncing disabled.Reconnect your device and test to see if the issue still occurs. If your device is recognized successfully, you may be able to isolate which type of data is causing the issue. Do this by deselecting all syncing options under each of the syncing tabs and then sync. After that, re-enable your sync options one at a time until the issue returns.
    Note: If the issue only occurs when syncing data from the Info tab is enabled (For example: Contact, Calendar, Mail account or Bookmark syncing), reset the Sync History (for Mac OS X instructions see this article, for Windows see this article).
    For Mac OS X: Click the iTunes menu and choose Preferences. Click the Devices tab and place a check next to option to "Prevent iPods, iPhones and iPads from syncing automatically." Click OK.
    For Windows: Click the Edit menu and choose Preferences. Click the Devices tab and place a check next to option to "Prevent iPods, iPhones and iPads from syncing automatically." Click OK.
    Check your device for podcasts. If there are any podcasts, manually delete all podcast episodes from the device by sliding your finger across the podcast episode's name and tapping Delete. Once all podcasts are removed from your device, reconnect it to the computer, open iTunes, and test.
    If possible, test to see if connecting your device to a different computer with the latest version of iTunes installed resolves the issue.
    Test with iTunes plug-ins removed.
    Quit iTunes.
    Navigate to the following folder, based on your operating system:
    Windows XP:  C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iTunes Plug-ins
    Windows Vista or Windows 7:  C:\Users\[username]\App Data\Roaming\Apple Computer\iTunes\iTunes Plug-ins
    Mac OS X:
    ~/Library/iTunes/iTunes Plug-ins   (The "~" represents your Home folder)
    /Library/iTunes/iTunes Plug-ins
    If any files are in this folder, move them to the Desktop temporarily.
    Open iTunes and test to see if the issue is resolved. If so, you may leave these iTunes plug-ins removed. If you wish to re-use these iTunes plug-ins, consult the vendor for the iTunes plug-ins to see if any updates are available.
    If the issue also occurs on a different computer:
    If the issue does not occur on a different computer, or no other computer is available to try:
    -Jason

  • ITunes doesn't recognize iPod Touch

    I doubt that this is a Touch-specific question, but that's what I have. A couple weeks ago, I reinstalled 10.4. Since then, iTunes has not recognized my iPod touch when I plug it in. Any ideas?
    Thanks,
    Max

    Hello, 
    Try re-installing the latest version of iTunes:
    http://www.apple.com/itunes/download/
    I realize this is very un-Mac like fault finding but several people have reported that when updating to Leopard they had to re-install iTunes 7.6 to get their +iPod touch+ to be recognized again. I believe this be because the +iPod touch+ needs the Apple Mobile Device Service to be installed which is removed during some OS updates and can only be reapplied by installing iTunes again.
    mrtotes

  • ITunes doesn't recognize iPod Touch 4gn

    So, it happened to me before and I asked a question about it right here - https://discussions.apple.com/message/17425614#17425614
    But now it happenes again. My iTunes' version is the latest, and I don't know what to do. I'm tired of having the same trouble over and over again.
    Help?

    iOS: Device not recognized in iTunes for Windows

  • TS1369 After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?

    After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?

    I followed all the instructions on the suggested page. Many files in C:\Program Files\Common Files\Apple\ and C:\Program Files (x86)\Common Files\Apple\ could not be deleted. Message said ""Cannot delete files: It is being used by another person or program"' but could not find iPodService.exe in task manager (also, the "Cannont delete ... " did not mention iPodService.exe).
    Deleted all that I could. Reinstalled iTunes. Still same result. iTunes and computer both recognize my old iPod. Only the computer recognizes iPod Touch.

  • Itunes doesn't recognize Ipod even though Itunes appears!!!!

    Itunes doesn't recognize Ipod even though Itunes pops up! I dropped it like 1 foot in the air once and landed on concrete. Now everything's fine until I play a song and it will just skip, freeze or just play a little bit and then skip. I don't think this is the problem but this is getting more wierd. I've tried almost every solution in this site but none of them worked so please, anyone, help me if you have a solution to this problem!!!

    When your iPod does not appear in iTunes:
    http://docs.info.apple.com/article.html?artnum=61771
    You might want to reset your iPod to prevent any more skipping and freezing. Press and hold the MENU and CENTER buttons - at the same time - until the Apple logo shows. This should take about 6 seconds. Also, you want to do this while your iPod is connected to your computer.
    When your iPod skips while playing a song:
    http://docs.info.apple.com/article.html?artnum=61018

  • Windows 7 doesn't recognize ipod touch 4g

    windows 7 doesn't recognize ipod touch 4g.  I have restarted my computer and it doesn't work. I tried it yesterday and it work. I have tried it on my laptop and it recognize it. so what the problem?

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests

  • Imac 10.7.5 doesn't recognize iPod touch 32gb 5th gen, iPad and iPad mini all work ok

    imac 10.7.5 doesn't recognize iPod touch 32gb 5th gen, iPad and iPad mini all work ok.
    Itunes 11.3
    7.1.2 iPod touch 32gb, V/ 5th generation
    I just don't get it. I got the iPod from a friend which didn't use it at all. If I connect my iPad or iPad mini to my mac, they all get connected well and iTunes sees them too. iPod touch not for some reason
    The iPod touch is completely new, no missing contacts etc. It works on other macs as well. Only my iMac doesn't see the iPod Touch. Maybe I can repost this problem in The IMAC section in stead of the iPod Touch, since I think its a iMac problem from now on...
    please help!

    Iphone 5 lightning port charging problem - SOLUTION!
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • My husband gave me his iPod touch, even after resetting all settings, and even though I have a user name and password whenever I need to update apps it shows his previous user name,  and is asking for his password.  How do I fix that?

    My husband gave me his iPod touch, even after resetting all settings, and even though I have a user name and password, whenever I need to update apps it shows his previous user name,  and is asking for his password.  How do I fix that?

    dom59 wrote:
    Ok, when I go into my Apple ID account, everything looks right.  It does show my user name.  It's only on the iPod that it shows my husband's previous user name, and it asks for his password.  Everything in iTunes and my account looks right.  The issue only seems to be with the actual device, iPod Touch 4th gen.
    There is more than one way to access the Apps Store and the iTunes store.  One is via iTunes on your computer, and the other is via the apps on your iPod.
    Just because you are logged in on your computer does not mean you are logged in on your iPod.
    The reason your husband's user name comes up is because he was the last one to log on.  You can change that by going to Settings>Store.  Tap the Apple ID, Tap Sign Out, Tap Sign In, Tap Use Existing Appel ID, enter your e-mail address and Apple ID password, and tap OK.

  • Itunes doesn't reconize ipod touch anymore

    itunes doesn't reconize ipod touch anymore

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with              
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • Itunes doesn't recognize ipod screen stuck on do not disconnect

    itunes doesn't recognize ipod screen stuck on do not disconnect

    Have you worked through each of the troubleshooting steps in this  support document yet?
    http://support.apple.com/kb/TS1410
    B-rock

  • Doesn't recognize Ipod touch after upgrade itunes to 11.1.3.8

    i upgraded itunes and my 2gen ipod touch will not open itunes. It is recognized as a drive in the file folder

    I've tried most all of the "solutions" listed' uninstalling itunes, reinstalling, checking Admin Svcs for Ipod and Itunes. Still no luck. Seems there would be a option when plugged in to start Itunes, then we could get to the ipod anyway.

  • Comp. won't recognize ipod touch 4g after ios4.3 update

    So i updated my ipod 4g to ios4.3 and it downloaded and installed fine but then my computer didn't recognize my ipod. A window came up saying that "itunes has detected an ipod in recovery. You must restore this ipod before it can be used with itunes." I then restored it but it didn't finish and the same window appeared. I tried restoring a second time but then an error appeared "Error (-1)"
    I tried looking up what that error was but it is not in the support/help portion in the apple website. So now my ipod is just sitting here, fully plugged in with the connect to itunes screen.
    I also updated to the latest version of itunes BEFORE I tried to update to ios4.3. I rechecked to make sure itunes updated but it stated that it did. Please help anyone!
    Oh, I have a PC with Windows 7.

    Have a similar problem. My computer is PC with 64 bit windows 7. Itunes is version 10.2.1.1. I use Microsoft Security Essentials for virus/firewall.
    Anyways, I did the update this morning. When download finally finished, ITunes began updating my IPod touch & I got a single error (I didn't catch it, but may have been something like 1620 or 1602). I restarted my computer to try everything over again. I booted up and loaded Itunes, but it wasn't saying anything, and I also noticed my IPod wasn't showing up either. I checked, and it was still plugged in, but I did notice that it had a screen with a usb plug pointing to Itunes like I should plug in my Ipod, but it was plugged in.
    I checked on internet a bit & didn't find much that was very helpful. I did find one thing on Apple support that sometimes driver gets messed up on update (http://support.apple.com/kb/TS1538), so I tried that. This entailed deleting the usb driver for apple mobile devices, and then scanningn for new devices, and restoring the apple mobile device driver from a directory under the C drive (c:/program files/common files/apple/mobile device support/drivers). Updating to this file gives a driver that calls itself "Apple Recover (iBoot) USB Driver" with a driver date of 2/11/2011. This has no effect, and I still have the same screen on my IPod and it doesn't show up in Itunes.
    On internet I found that my IPod seems to be in a recovery mode, and I tried a couple of the listed methods to get out of the recover mode (these all failed for me, but maybe they'll help someone else). I held down both home & power buttons for 10 sec and then letting go of just the power button. Then you wait until after apple logo dissapears (about another 10 sec) and then you let go of the home button. This is supposed to start the recovery mode for your IPod, but for me I just get a blank screen. There is also a reverse method that does either a DFU or Recovery mode. For that method you just reverse the releasing of the Home and Power buttons, but that just got me back to the usb+itunes screen instead of to a blank screen.
    While doing both of these things, I did notice that it would sometimes replace the Recovery Driver with a DFU driver, or sometimes you'd get 2 non-working Recovery drivers. None of these drivers had any effect on Itunes being able to see my IPod. The Apple Recovery (iBoot) USB Driver only comes up when you do the apple support option.
    Hopefully this error is widespread enough that it will get apple's attention and a fix will come forth shortly. I'm at my wit's end trying to fix it.

  • Powerbook g4 doesn't recognize ipod touch

    i've upgraded my powerbook a bit over the past couple years and i believe it to be compliant with the specs for the use of an ipod touch. i recently upgraded to OS X 10.4.11, i have the newest version of itunes and i believe the usb ports are 2.0 (but i can't figure that out for sure, just that's what the spec page for it on apple.com said it came with). do i need more to connect my ipod touch? when i connect it the ipod responds but lighting up, but doesnt do anything but just activate like i turned it on. it doesnt connect or charge or anything. i am using the usb connector that came with the ipod too. if anyone has advice i'm all ears. thanks.

    alright! i have a usb 2.0, that's what i thought.
    when the ipod touch is connected it doesn't respond like it is connected to the computer.
    and itunes doesn't recognize it. it doesn't come up under devices.
    it also doesn't show up on my desktop or on the left side of my finder where cds, servers and ipods should be shown. it doesn't connect at all.
    but the system profiler does seem to know there is an ipod plugged into the usb port but nothing happens about it.

Maybe you are looking for

  • Run Excel and read file from excel to display on table

    Is it possible to launch excel and open a new document that shows a default header column for name and phone numbers? Is it possible to read this excel file that was created and display onto a table? If so, can anyone please show it to me?

  • Remove serial number profile

    I would like to remove a serial number profile in the material master for a material that does is no longer handled as serialized. During trying to remove the serial number profile in the respecitve material a system-error message occurs telling "Ser

  • To know the status of activation of Infoproviders, Query etc--

    Hi, How we can know the status of BI objects such as Infocubes,queries, process chains and so on whether they are activated or not? what happens if u  by mistake reinstall the object of already in activation state? Raj

  • ORA-1653: unable to extend table ABC in tablespace APPS_TS_TX_DATA

    Facing problem ORA-1653: unable to extend table ABC in tablespace APPS_TS_TX_DATA Searched many forums but no particular update

  • Corrupt file prevents installation

    I recently re-installed Win XP on my (old) computer. When I go to re-install my Premiere Elements using the original installation CD the installation fails with: Error 1335 Data1.cab file required for this installation is corrupt and cannot be used.