ITunes doesn't recognize my updated iPod

Using iTunes 5.0.1 I upgraded my iPod software to 1.2 for my color iPod. I still get the message that I cannot use purchased music because my software is too old. On the iPod the version says it is 1.2. I tried repairing permissions but it didn't help. I tried reinstalling iTunes 5.0 and that didn't work either. Any suggestions?

Hello mhill10633,
Based on your post, it sounds as if your device is not recognized by iTunes for Windows. I have located an article that will walk you through a series of troubleshooting steps to resolve this:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Similar Messages

  • My Itunes doesn't recognize my new iPod classic

    I got it got it checked at the apple store and the Apple associates told me there was something wrong with my itunes driver, but they didnt want to try and fix it because none of them knew how to fix a PC

    This may sound lame but try updating your Windows updates and also update your iTunes. I may be wrong but iTunes doesnt really have a driver. Does your computer recognize something is plugged in when you plug the iPod in?  If your computer doesnt recoginze youriPod then try plugging it into a different USB, perferable the ones in the back of the computer.
    If that doesnt work you need to go to Control Panel and find your way to Device Manager and right click on the USB one and click look for updates.

  • Itunes doesn`t recognize my 80GB ipod  classic.it appears in my computer but it says i must format the disk."windows was unable to format".what should i do to make itunes recognize my ipod?

    help:)

    Can you check what is the current format of  your iPod?
    http://support.apple.com/kb/HT1335
    Have a nice day!

  • Itunes doesn't recognize previously authorized ipod touch

    Will I lose all my media if I backup manually 1st?

    Hi Mskmiller,
    If you are having issues with repeated prompts to authorize iTunes, even after you have successfully authorized, you may find the following article helpful:
    Apple Support: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Regards,
    - Brenden

  • IPOD's not UPDATING, ITUNES doesn't recognize internet logon

    I cannot update my ipod nano 1st gen. 'cause itunes doesn't recognize internet and the ipod updater. Have to say that Itunes store is available and i don't have any antivirus software installed on my mac.
    anybody will help me?please...
    i've got the 1.2 version for ipod and i couldn't download the 1.3 version.
    THANKS

    No, first of all i've got a MacBook not with dual core
    I suspect an error with the connection type 'cause at work i receive this kind of problem and at home not.
    I solved the problem with the ipod updater yesterday, at home i successfully updated it but today i get a new error message while contacting itunes server:
    I cannot process the request, an unknown error occurred on itunes server (error type -206)!
    Do you know why?may it depend by the Office server?
    thanks
    MacBook 12"   Mac OS X (10.4.8)  

  • ITunes doesn't recognize iPod since last software update

    I updated to iTunes 5.0.1 & iPod 2005-09-23 updater & now when I plug in the iPod w/ USB to my PowerBook G4 running 10.4.2, iTunes doesn't recognize it-- no icon in bottom-right grey area, nor left-hand column-- and the iPod says "Do not disconnect." Which means I'm kinda stuck. Tried restarting, didn't help. Advice? Thanks.

    I have the EXACT same problem. Support line suggeste that the iPod updater must have newer software than the iTunes, so I should go to Apple & download the iTunes update. Well, I did, and it didn't do a @#%ing thing to help. I'm NEW to mac & I'm P.O.'ed!!! (paid significantly extra money for iBook compared to Dell, etc since it's supposedly so easy & user-friendly... NOT an impressive start!!!)

  • Hi,I had an ipod touch 3 and then buy an ipod touch 4 and never went back to update the 3, and remained in the 3.1 software and now try to update and could not and to top it I restored it and now it doesn't work and itunes doesn't recognize. WHAT CAN I DO

    Hi,I had an ipod touch 3 and then buy an ipod touch 4 and never went back to update the 3, and remained in the 3.1 software and now try to update and could not and to top it I restored it and now it doesn't work and itunes doesn't recognize it. WHAT CAN I DO?

    OMG!!! NEVER MIND, I JUST DID IIIITTTTT!!!! YAYYYYYY!!!

  • ITunes doesn't recognize either of my iPods

    I downloaded the latest update recently and since then iTunes doesn't recognize either of my two iPod touches (4th gen), even though the computer does. My iPad (1st gen) is still recognized normally. I tried uninstalling iTunes and reinstalling it several times, and that didn't work. The iPods are recognized by iTunes on other computers. The computer in question runs windows 8.1, if that makes a difference. From the look of these forums it looks like I'm not the only one who has this problem. Please help.

    Hi Tanskalinen,
    If you are having issues with iTunes not recognizing some of your devices on your Windows machine, you may find the following article helpful:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    - Brenden

  • Itunes doesn't recognize iphone 4 after ios 5 update

    I updated my iphone to iOS 5 last week realized that when I connect it to my computer itunes doesn't recognize the phone now.  i've tried restarting both the phone and my macbook.  I tried reinstalling itunes.  I can't restore the iphone because I cannot get the phone connected to itunes.  Any ideas?

    Put unit in Recovery or DFU mode and restore. 
    http://support.apple.com/kb/ht1808
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • Tried restoring iPod, never finished, now iTunes doesn't recognize iPod

    i tried to restore my iPod, but then my computer froze midway. Now when i try to plug the iPod into my computer, my iTunes doesn't recognize it and whenever i try to use the updater, it just keeps saying 'Ipod Service Error'. Now i can't put my songs into my iPod and the battery icon/'Do Not Disconnect' logo is stuck in this really traditional fashion, not like the normal font/picture. Does anybody know what i can do?
    iPod Nano Windows XP

    Welcome to Apple Discussions!
    This link addresses that error...
    iPod shows up in Windows but not in iTunes
    btabz

  • I am trying to sync an old ipod nano (2nd generation) to my itunes on a windows pc but the itunes doesn't recognize the nano and says that it is synced with another computer. Unfortunately, I don't have the old computer now. How do I sync this nano to itu

    I am trying to sync an old ipod nano (2nd generation) to my itunes on a windows pc but the itunes doesn't recognize the nano and says that it is synced with another  computer. Unfortunately, I don't have the old computer now. How do I sync this nano to itunes ?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • My iPod Classic 160 is in disc mode and won't turn off, itunes doesn't recognize it - ¿how can I make it work again?

    My iPod Classic 160 is in disc mode.  I responds to nothing.  iTunes doesn't recognize it.  It doesn't sync.  I've tried to restore and got error 1429.  Now it just stays in disc mode and won't turn off.  I'm keeping it connected to the charger so it doesn't go dead.  Is there anything I can do to resurrect my pod?

    To get out of disk mode do a iPod Hard Reset.
    Toggle the Hold switch till you dont see the red mark.
    Press Menu and Center buttons simultaneously for about 10 secs till the Apple logo comes ON then release the buttons
    Select your preferred language.
    See this Apple support Article on the 5Rs.
    http://www.apple.com/support/ipod/five_rs/classic/
    If you try to restore and get a1429 error message, read this Apple Support Article
    http://support.apple.com/kb/TS1372
    Good Luck!

  • Iphone 4S block during update 6.1.3 and iTunes doesn't recognize my phone

    Hi. During update on iphone 4S, I had an error message from itunes. It said that update wasn't possible. And now Iphone block on the screen to connect to iTunes. But iTunes doesn't recognize iPhone. If I try to reinstall the last version, I have the message that it is impossible because the current version is newer!....
    Can somebody help me please?

    Error 2, 4 (or -4), 6, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • ITunes doesn't recognize IPod Nano 7th Generation

    ITunes doesn't recognize my IPod Nano 7th Generation. I get a message saying "An IPod has been detected but could not be identified properly". My Windows 7 computer shows the IPod Nano as a removable drive until I launch ITunes at which point it disappears from the list of removable drives. I even disabled my security software (Norton 360 but not Spybot S & D) and it didn't solve the problem. Any suggestions..............Thanks

    Hello Aruniem,
    The article linked below provdies information and steps that can help resolve this issue.
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/TS3218
    Cheers,
    Allen

  • My itunes doesn't recognize my ipod touch because I've never connected it before and it is disabled, it won't let me restore it, it says to enter a passcode in order to connect and I can't because it is disabled

    My ipod touch is disabled and it says to connect to itunes to restore.  I have never added the ipod to my devices on my itunes so when I connect it says that itunes doesn't recognize the device.  I then put it in recovery mode and connected it to itunes and I clicked restore and it says that itunes can't connect until I put in the passcode, but I can't put in a passcode because it is disabled!!!  I don't know how to fix it and it is only a month old, should I take it back?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen        
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Maybe you are looking for

  • Discoverer Report opened from Portal does not show correct data

    Hi, When I try to open a Discoverer report from a portal that I created, it shows stale data but when I click on "Analyze", it shows all the data correctly. Does anyone know what the reason could be for this? Thank you, Santoshi

  • Cancelamento no Job.

    Pessoal, Boa tarde! está e a minha 1° vez aqui no forum, e gostaria da ajuda de vocês. Trabalho no módulo PP e estou tendo um problema com um job. Aqui na empresa, trabalhamos com Mensagens de Processo. Temos um Job chamado: Z_Send_Process_Mesage_02

  • Forms 6i and XP - will it ever happen

    Anyone in Oracle care to give an update on the promised release of Forms 6i for XP?

  • Vendor Org struct.

    Hi Gurus, Is it possible to enter the Bussiness partner manuly in Vendor Org structure. thanx in adv regds Kumar

  • How to deregister epm instances from shared services

    Hi All, I had Hyperion EPM 11.1.2.1 on Windows Server A and repsitories on Oracle Database B. I freshly installed Hyperion EPM 11.1.2.1 on Windows Server C and configured it with repositories on Oracle Database D (which are exact replica of repositor