Itunes doesn't recognize previously authorized ipod touch

Will I lose all my media if I backup manually 1st?

Hi Mskmiller,
If you are having issues with repeated prompts to authorize iTunes, even after you have successfully authorized, you may find the following article helpful:
Apple Support: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Regards,
- Brenden

Similar Messages

  • Itunes doesn't open when my ipod touch 4g is connected, consequently it won't charge or sync

    itunes doesn't open when my ipod touch 4g is connected, consequently it won't charge or sync

    I was surprised too, but I guess nobody gave a cr*p. I figured it out on my own. Basically, sync, then uncheck the box for the option to open iTunes when that iPod is hooked up, sync again, then check the box, and sync one last time. A dialog box pops up that asks if it's OK to install "iTunes Helper". Say "yes". Now it works.

  • Iphoto doesn't recognize pics from ipod touch

    iphoto doesn't recognize pics from ipod. It says they are an unrecognizable format.
    Anything to do with the new software update?
    btw
    hate this new system.
    I guess the engineers need work?

    Have you been able to get the ISO on that camera before. Did you have the camera set to Auto?
    All of my Canon cameras do not record the specific ISO even though a specific ISO is set. The only Canon file I have that gives an ISO in iPhoto is from a Canon EOS 30D. I have Konica files that provide ISO in iPhoto as does a Nikon D100. The Canon point and shot cameras, s10, s100, s110, s400, s410 and the SD700 IS do not record the specific ISO value. It just give Light Source-Auto when viewed in an application that can read all of the fields.
    Do you Twango?

  • My iTunes won't recognize my new iPod touch

    i just got a new ipod touch for christmas.  when i try to sync it to my itunes, which isn't updating by the way, it doesn't recognize the device.  if i uninstall itune completely and reinstall it, will this help?

    Check out this Apple article -> iOS: Device not recognized in iTunes for Windows
    Is the Apple Mobile Device Service running?

  • ITunes will not recognize my 2G iPod Touch

    Just got a new laptop with Windows 7 64bit and IE9.  I have dowloaded latest version of iTunes 10 and my problem is that when I plug in my iPod Touch it will not appear as a device in iTunes.  It shows up in mycomputer as a digital camera but say's it's my iPod and has an iPod icon next to it.  When I connected the first time it worked just fine but I have not been able to get it to recognize since.  I am not getting any errors and the autoplay window does not pop up when it's plugged in.  Had a similar problem with my old laptop (part of the reason I got the new one) but after unplugging it a few times or restarting the computer it would always work, not so on the new machine.  I should mention it works just fine on my old desktop. Tried a few things I saw in some other threads but nothing has worked.  Not a techie but I can follow directions.  Please help, this is really irritating, got a new computer so I wouldn't have these problems anymore!

    I've tried all 4 ports on my computer, none of them work. When I plug in my older ipod nano, itunes recognizes it instantly.

  • After upgrading to Lion , itunes does not recognize my ipad, ipod touch anymore.

    Yesterday I updated to Mac OSC Lion on my original Intel Macbook (the first Aluminum Macbook) with 4GB RAM.
    Today I had a run in with my ipad and ipod touch, both of whom are not being recognized by itunes anymore.
    My ipod shuffle and classic are still being recognised and do sync.
    I have read through the support pages and annoyingly even factory-reset my ipad, which cannot be used anymore due
    to itunes not recognizing the device !
    System profiler does show either ipod or ipad being connected to the usb port. Resetting of the devices did not help (see above)
    Any clues to this inconsistent behaviour differentiating between classic ipods and ipod touch/ipad ?
    js.

    update: It seems like the XCode update did interfere with itunes. I reran the XCode install this time with itunes not running. This seems to update all necessary drivers and Library items correctly.
    After this IPad and IPod touch were working fine again.

  • HT1620 windows 8 and itunes conflict, itunes won't recognize my existing ipod touch

    I have an existing ipod touch and windows 8. For some reason, itunes is telling me to check latest windows update but my computer is up to date.No idea what to do?

    Hi lovemymusic99,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    This is the most recent version of iTunes for Windows.
    Click on the link to see more details and screenshots. 
    Apple - iTunes - Download iTunes Now
    http://www.apple.com/itunes/download/
    iTunes 11: Frequently used features
    http://support.apple.com/kb/HT5649
    iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12113?viewlocale=en_US
    Cheers,
    - Judy

  • My Itunes doesn't recognize my new iPod classic

    I got it got it checked at the apple store and the Apple associates told me there was something wrong with my itunes driver, but they didnt want to try and fix it because none of them knew how to fix a PC

    This may sound lame but try updating your Windows updates and also update your iTunes. I may be wrong but iTunes doesnt really have a driver. Does your computer recognize something is plugged in when you plug the iPod in?  If your computer doesnt recoginze youriPod then try plugging it into a different USB, perferable the ones in the back of the computer.
    If that doesnt work you need to go to Control Panel and find your way to Device Manager and right click on the USB one and click look for updates.

  • ITunes doesn't recognize my updated iPod

    Using iTunes 5.0.1 I upgraded my iPod software to 1.2 for my color iPod. I still get the message that I cannot use purchased music because my software is too old. On the iPod the version says it is 1.2. I tried repairing permissions but it didn't help. I tried reinstalling iTunes 5.0 and that didn't work either. Any suggestions?

    Hello mhill10633,
    Based on your post, it sounds as if your device is not recognized by iTunes for Windows. I have located an article that will walk you through a series of troubleshooting steps to resolve this:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Itunes doesn't recognize computer authorized

    Iphone 5.  Try to sync with computer.  Itunes says: need to Authorize Computer.  I go to "Store" - Authorize - get message that says I'm already authorize

    Hi Mskmiller,
    If you are having issues with repeated prompts to authorize iTunes, even after you have successfully authorized, you may find the following article helpful:
    Apple Support: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Regards,
    - Brenden

  • Itunes doesn`t recognize my 80GB ipod  classic.it appears in my computer but it says i must format the disk."windows was unable to format".what should i do to make itunes recognize my ipod?

    help:)

    Can you check what is the current format of  your iPod?
    http://support.apple.com/kb/HT1335
    Have a nice day!

  • My itunes doesn't recognize my ipod touch because I've never connected it before and it is disabled, it won't let me restore it, it says to enter a passcode in order to connect and I can't because it is disabled

    My ipod touch is disabled and it says to connect to itunes to restore.  I have never added the ipod to my devices on my itunes so when I connect it says that itunes doesn't recognize the device.  I then put it in recovery mode and connected it to itunes and I clicked restore and it says that itunes can't connect until I put in the passcode, but I can't put in a passcode because it is disabled!!!  I don't know how to fix it and it is only a month old, should I take it back?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen        
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Hi,I had an ipod touch 3 and then buy an ipod touch 4 and never went back to update the 3, and remained in the 3.1 software and now try to update and could not and to top it I restored it and now it doesn't work and itunes doesn't recognize. WHAT CAN I DO

    Hi,I had an ipod touch 3 and then buy an ipod touch 4 and never went back to update the 3, and remained in the 3.1 software and now try to update and could not and to top it I restored it and now it doesn't work and itunes doesn't recognize it. WHAT CAN I DO?

    OMG!!! NEVER MIND, I JUST DID IIIITTTTT!!!! YAYYYYYY!!!

  • Help please! My iTunes doesn't recognize my ipod touch

    Hi, I connected my ipod to my PC and my ipod and my itunes doen't recognize that the ipod is connected.
    Thx for hepling.

    See this Apple article:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • ITunes doesn't recognize iPod Touch

    I doubt that this is a Touch-specific question, but that's what I have. A couple weeks ago, I reinstalled 10.4. Since then, iTunes has not recognized my iPod touch when I plug it in. Any ideas?
    Thanks,
    Max

    Hello, 
    Try re-installing the latest version of iTunes:
    http://www.apple.com/itunes/download/
    I realize this is very un-Mac like fault finding but several people have reported that when updating to Leopard they had to re-install iTunes 7.6 to get their +iPod touch+ to be recognized again. I believe this be because the +iPod touch+ needs the Apple Mobile Device Service to be installed which is removed during some OS updates and can only be reapplied by installing iTunes again.
    mrtotes

Maybe you are looking for

  • X-Fi XtremeMusic installation CD crashes at the beginning - SOLUT

    I was about to post about this problem when I just came up with solution. So here I'm posting in mind it might help someone else. When you got the new X-Fi XtremeMusic installed in a PCI-slot and you start Windows XP and when you try to put the insta

  • Define & describe "Noise Gate" Effect for Real Instrument

    Newbie question: Can someone do this, or point me to a good discussion of the use of the Noise Gate effect? I searched for this term throughout the GB forum and found very little. I see that it dampens sounds at specific decibel levels, but how might

  • Retrieving lots of rows through XSQL servlet

    Hi Steve! I am currently trying to break XSQL-servlet in order to have some proof of usability for our customers. During one of these 'sessions' I discovered that the XSQL servlet throws me out with an exception error (out of memory) when I try to re

  • Variant Field in AGR_1251 - what is the use?

    Dear Gurus, I have tried to look for this information many times but couldn't find out any answer. In the table AGR_1251 we can see there is a Field called "Variant". I just couldn't find out the reason for this field and what kind of variant it refe

  • Report Page Formating ?

    when a user prints a report some of the data get carried over to the next page and page 1 has empty white space gap. So all the data in 21 page report gets shifted over. Is there a solution to this issue so that data can when printed can be concise o