ITunes doesn't respond when unsubscribing from a podcast feed...

As the title states, iTunes basically freezes when I try to unsubscribe from a podcast feed. Why is this happening and how can I fix it?

Well, nevermind about iTunes completely freezing up, as it finally unsubscribed from a podcast feed, but I would still like to know why it took so long to do so. My only guess is that the podcast I unsubscribed from had a lot of episodes that were available for download (and I mean A LOT). I only downloaded one episode, though. Any thoughts?

Similar Messages

  • ITunes doesn't respond when I opened it

    OS windows 7 ultimate 64 bit
    iTunes version 10.7.0.21
    Everytime I open iTunes, it doesn't respond. I tried end the APSDaemon.exe*32 preocess, it doesn't work. when i opened itunes, APSDaemon.exe*32 poped up again. Also I followed the instruction http://support.apple.com/kb/HT1923 , doesn't work either.

    Okay. Let's try the following document:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues

  • Itunes doesn't respond

    Hello to everybody.
    I've a problem with latest version of itunes (7.0.1) and ipod software (1.2). When I connect my 30gb ipod, itunes starts and my ipod is recognized by the program, but when it try to autosynchronize itunes freezes and the ipod too. I've to close itunes with ctrlaltsupr and the ipod appears to be frozen (with the message in the screen: "no disconnect") until I put out the usb cable.
    What can I do??
    In some forums it's said that is better to restore the ipod software to 1.1 version. It's true?? How can I do that?
    Please, HELP!!
    P.D: sorry about my english. I'm Spanish, hehe. ;-P

    Well, nevermind about iTunes completely freezing up, as it finally unsubscribed from a podcast feed, but I would still like to know why it took so long to do so. My only guess is that the podcast I unsubscribed from had a lot of episodes that were available for download (and I mean A LOT). I only downloaded one episode, though. Any thoughts?

  • My ipod touch 4th gen froze! blank white screen and doesn't respond when turned off, or connected to my laptop

    my ipod touch 4th gen froze! only blank white screen and doesn't respond when turned off or connected to my laptop!

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • ITunes doesn't open when launched or takes several minutes to open

    Just like the title says, iTunes doesn't open when I click the shortcut in the Start menu. It appears in the windows task manager under proccesses as 'iTunes.exe *32'. Sometimes it will open 10-15 minutes later. It worked just fine until a few weeks ago. I have tried running as Administrator, I've tried uninstalling/reinstalling multiple times. Not sure what else I can do. I need to use iTunes to synce my mom's iPhone 4S and my iPod touch 3 Generation. Any help is greatly appreciated!
    Windows 7 Ultimate 64 bit
    Intel Pentium Dual-Core E6300 2.8GHz
    nVidia Geforce GT520 2GB
    8 GB RAM

    You said it was showing in the processes as
    iTunes.exe *32
    You have the wrong version
    Uninstall iTunes as instructed:
    http://support.apple.com/kb/ht1923
    Reboot
    Download iTunes from here:
    http://support.apple.com/kb/DL1615
    and reinstall.

  • Itunes doesn't open when i plug in my iphone

    iTunes doesn't open when i plug in my iPhone

    You may have an incomplete iTunes installation.  Uninstall your iTunes and Re-install again.
    If this still fails, try the following steps:
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

  • Itunes keeps not responding when i try to log out of my account

    itunes keeps not responding when i try to log out of my account
    I have tried uninstalling the itunes program and re Installing it but it has not worked,
    Is there anyone that can help me?

    Have you tried leaving it to hang for 5 minutes?

  • Access 2010 on 64 Bit Windows 7 Access "Not Responding" when changing from forms view to design view and back

    I am running
    Windows 7 64 bit
    Access 2010 32 bit
    Developing an application with a split FE BE with both files local but continue to have the message "Not Responding" when switching from forms view to design view and back as well as if I try to connect to a subform or object on the sub form.

    I have seen this behavior when the form's RecordSource is a complex query such as a crosstab or a query with several nested queries. To test if this is your case, remove the RecordSource and see if the form starts acting normal again.
    Then again, if the form has several subforms they might be slowing up the loading time.
    Bill Mosca
    www.thatlldoit.com
    http://tech.groups.yahoo.com/group/MS_Access_Professionals

  • ITunes doesn't open when iPad is connected

    iTunes doesn't open when my iPad is connected although the box is checked on the summary page of iTunes

    Hey saxmanswife,
    Thanks for the question! I was able to find a document that goes over the same issue you're encountering, iTunes not opening automatically when connecting your device. Check it out here and see if that resolves it:
    iTunes for Mac won't open automatically when connecting device
    http://support.apple.com/kb/TS3927
    Best,
    David

  • Itunes doesn't open when my ipod touch 4g is connected, consequently it won't charge or sync

    itunes doesn't open when my ipod touch 4g is connected, consequently it won't charge or sync

    I was surprised too, but I guess nobody gave a cr*p. I figured it out on my own. Basically, sync, then uncheck the box for the option to open iTunes when that iPod is hooked up, sync again, then check the box, and sync one last time. A dialog box pops up that asks if it's OK to install "iTunes Helper". Say "yes". Now it works.

  • Music doesn't start when selected from playlist have to push pause then start. Always playing one track behind what is on screen

    Music doesn't start when selected from playlist have to push pause then start. Always playing one track behind what is on screen as my I-pad worksorks fine

    Same problem here, since upgrading to IOS-5.  Whenever I try to shuffle or play a genius mix (or even simply play an album) the iPod will skip the first one or two songs, play one song and then 'crash'.  I say 'crash' because it selects the next song and then nothing happens - the player isn't paused, and it appears to think it's playing, but the time bar doesn't change and no sounds come out.  Occasionally I've noticed the album artwork is wrong too.
    Rebooting does NOT work - I've tried it a number of times.
    Is this just an iPod problem??  If so, I would be surprised if Apple do anything quickly about it - they're more worried about iPhone problems I expect, and we (iPod users) are just the poor relations...  C'mon Apple - SORT IT OUT!!!!

  • Premiere doesn't respond when rendering.

    My adobe premiere pro 5.5 doesn't respond when I'm rendering a video. It works fine, until it reaches around 86% when the tab comes up that it has stopped working, and windows is looking for a solution.
    THis is very frustrating, especially after the video has been rendering after 2 hours.

    Welcome to the forum, LotusS.
    Please elaborate on what you mean by "render." Some people use "render" as synonymous with "export" or "encode," but in Premiere we distinguish between rendering and exporting/encode. Rendering is reserved for creating preview files for smoother playback within PPRO, whereas exporting/encoding covers writing a sequence out to an output clip.
    If you're talking about rendering preview files, then the first question is whether that's even necessary. In Premiere Pro, you need to render only if playback is not smooth and fluid; if you're satisified with playback without rendering, then don't bother.
    If rendering preview files is desirable, then  to isolate the cause of the hang, I'd render the sequence in segments by setting in & out points. Since the process is hanging at 86%, you could start by rendering the first three-quarters. Assuming that succeeds, then do smaller segments of the last 25% until you find the spot where it hangs. Then examine that section for an asset or effect or transition that's causing problems.

  • My ipod is on but it doesn't responds  when I touch it.what do I do!?, my ipod is on but it doesn't responds  when I touch it.what do I do!?

    my ipod is on but it doesn't responds  when I touch it.what do I do!?

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Itunes doesn't list all of my recent podcasts. My show is Black Tribbles and it only shows episodes through March 2013, however we do at least two shows a week and they aren't listed. The feed works because the show update to my computer. Help please.

    Itunes doesn't list all of my recent podcasts. My show is Black Tribbles and it only shows episodes through March 2013, however we do at least two shows a week and they aren't listed. The feed works because the show update to my computer. Help please.

    Your feed is at http://blacktribbles.podomatic.com/rss2.xml
    When subscribed to in iTunes the recent episodes show, but the Store hasn't updated for some time.
    There appears to be an issue with the feed. In the episode 'WRESTLING MARCH MADNESS: Final Bracket & Championship' of 31st March you will find in the 'description' tag the following line:
    4. KURT ANGLE
    At the end of this line is an invisible character which seems to be wrecking the feed - although it works OK when suscribing in iTunes it won't load in a browser (and I also found the feed very slow to load, which won't help matters with the Store)
    This sort of thing usually happens when you paste text in from a word processing application and manage to include one of the invisible control characters. I don't know how easy it will be do do it in Podomatic but you should delete that entire line and retype it to remove this charter.
    You should keep an eye on the time it takes the feed to be accessed - if there is a long enough delay (and it was quite some seconds when I tried) the Store may well timeout and fail to read it. At the moment it's showing a cached version from the last time it was able to read it.

  • Ipod nano 1st gen doesn´t work when disconnected from itunes

    I can´t do anything, it doesn´t even turn on, only work when connected to itunes, the moment i unplug it from the computer it stops working, please help!

    For anyone else having this problem, I found this solution to work. Try this first:
    a) Get Windows to restart the drivers:
        - disconnect your USB device and close ITunes
        - connect your USB device
        - if ITunes loads, close it.
    b) File explorer:
    Open File explorer and browse to
    C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    In that folder there should be a set of files named "usbaapl64...."
    right click on the one ending in "INF"
    Select Install.  It's very quick.
    remove the USB device
    c) Restart the computer.
    When you login again, load ITunes before you attach your USB device.
    d)If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job. Hope it helps.
    <Link Edited by Host>

Maybe you are looking for