ITunes doesn't see address book

I can't sync my address book to either my iPhone 4GS or my iPad (3rd gen) anymore. The contacts are all there in the address book on my iMac (all latest updates installed), but iTunes doesn't even recognize the groups that exist in my address book, and no contacts are transferred to either device.
iCloud for contacts is disabled on all devices, in the address book, only the account "Lokal" (I run OS X in German) is there.
Tried to reset sync history as proposed by Apple, did full reset on my iPhone, repaired permissions - all to no avail.
Any help would be greatly appreciated.

Addendum: syncing with Google doesn't work either. A new contact I open in Google does appear on my iPhone, but not in my Address book on my iMac.

Similar Messages

  • ITunes Fails to See Address Book Changes

    Recently (suddenly), ITunes has stopped reflecting changes made to my Address Book. No changes made on my Macintosh are downloaded to my iPhone and no new groups added to the Address Book on the Mac are listed in the Contacts area in ITunes. This problem persists if I delete everything in ~/Library/Application Support/AddressBook/ and reimport an archived version of the current data.
    Is there a file somewhere that iTunes looks at to determine the current contents of the Address Book? It clearly doesn't look directly at the Address Book data (unless there's a serious iTunes bug).

    That has no effect.
    Continued here: http://discussions.apple.com/thread.jspa?threadID=1396018

  • ITunes doesn't sync address book with contacts

    Syncing IPad2 with IMac address book doesn't update groups and contacts on IPad.

    If you're using Mobile Me, you can try this: On the iPhone, go to Settings > Mail, Contact, Calendars > Account Name. Turn OFF contacts syncing. The in iTunes on the computer, view the Info tab on the iPhone item page. You should now be able to check the Sync Address Book checkbox and then click the Sync button. This might work with non Mobile Me accounts too.

  • Itunes doesn't see my devices

    I've recently plugged (USB cable) my ipod and my iphone in to the mac book pro that they are always plugged into for syncing and backing up via iTunes. However, now iTunes doesn't see these devices, nor any other devices I plug in.
    Anyone had this problem?

    Try the suggestions in this support document: 
    iOS: Device not recognized in iTunes for MAC OS X, http://support.apple.com/kb/TS1591

  • ITunes doesn't "see" iPad

    I have a new Macbook Pro 2.66 / 8 GB, 15" and an iPad and an iPhone. The problem is that every now and then - about once a day or so, iTunes doesn't see the iPad or iPhone when they are plugged in. The device starts charging but there is no indication that a sync is occuring.
    Following the instructions here: http://support.apple.com/kb/HT1747 I reinstall iTunes and replace the AppleMobileDevice kexts and then things are fine, but after another day or so the problem occurs again. I have not been able to determine what might be causing that. Any idea?

    This totally does not address the problem. I have had my iPad for only a few days and I'm about to return it. I've been able to sync it once, after installing a new OS, then uninstalling iTunes... and then it just grabbed everything/apps from my iPod, most of which I would not have put on the new machine. Now I want to sync the apps I've purchased on the iPad and some music/movies and the computer doesn't "see" the iPad at all.
    Users should not have to wipe/restore the machine. If Apple insists on using iTunes as a portal for all things iPad, then iTunes needs a serious overhaul. It's a music tool now being used to hobble a much more dynamic machine.
    Anyhow - I like the iPad, but Apple isn't really letting me use it if I have to sync via iTunes, but iTunes isn't a functional tool.
    Thanks - please give me an option other than reinstalling iTunes many times a doy or returning my iPad.

  • Migration Assistant problem? : New iMac's iTunes doesn't see the catalog or playlist of my old Mac's songs on an external drive

    So I just migrated from a 10.7.5 iMac 27" from 2009 to 10.9.4 on a 2013 27" iMac with Fusion Drive.
    I don't use Time Machine. There are no backups involved here.
    Used Ethernet. Only took 20 hours... (BTW, it stayed on "less than 1 minute left" for like 12 hours but luckily I was away and just left it going in hopes it would work... and it did!)
    Anyway, back on my OLD iMac, I kept all of my songs on an external drive because my internal drive was too small. So iTunes looked at that drive for the music it was playing. I turned that drive off, even disconnected it, during the migration process because I thought it was confusing it during the first attempt which took 10 hours and nothing happened.
    So now it worked, finally. On my new iMac, running Mavericks, I now have two user accounts... the one that was set up when I started the computer the first time, and the new one that transferred over via Migration Assistant. No problem. I can live with that. The only thing is, I would still think the old XML files and library stuff would migrate over... but iTunes doesn't see it. When I open up iTunes, in *either* account, iTunes behaves as if it's brand new. Repeat: the old and new account on the new iMac, both, do not see an old iTunes library which IS on the old iMac. Only the music is on the external drive from what I understand.
    I've done this before so I know it's possible. I remember upgrading a long time ago and got iTunes to see my old library... even though some of the music was no longer there. It just puts "!" marks wherever there is no link. I was hoping that that's what I would find when I launched iTunes, but no luck. Even connecting the old hard drive to the new Mac (via USB) doesn't make iTunes all of a sudden "see" the old library. That data doesn't seem to be there. It didn't transfer over. Did it not transfer over because the songs weren't on the internal volume? Should I have left my external hard drive on?
    So.... now that I've spent almost 3 days total trying to get this to work, and everything is running... I don't want to have to start over in order to get iTunes to work.  Is there a way I can just drag over some XML files or something from the old computer? I don't want to lose all of the ratings and personal notes and everything.
    I should add also that I have like only four songs I've ever actually bought through iTunes. I'm still a bit old fashioned and buy CDs and rip them to Apple Lossless. So I hope it's not an authorization / reauthorization issue because I have like 1400 albums ripped.
    Thanks in advance for any help.
    --Jeff

    iTunes does not use the .xml it uses the .itl
    If you are sure your old library file migrated across (does the file size and modification dates suggest it has?) start iTunes while holding down the option/alt key and guide it to the .itl file to get it to use that one.

  • ITunes doesn't see PSE7 images

    I had Photoshop Elements 8 installed, and iTunes could see those photos just fine. But then my trial expired, so I had to uninstall and use PSE7. The problem is that iTunes no longer sees my PSE7 catalog and instead sees the PSE8 catalog as it was before it was uninstalled. I managed to track down where iTunes apparantly copied the PSE8 catalog and deleted it, but now iTunes doesn't see any PSE catalogs at all.
    Of course there is the option to sync with individual folders, but I'd rather not do that since PSE keeps them nice and organized, and iPod Touch doesn't show the folders within subfolders of the selected folder for photo syncing. So, how can I get iTunes to pick up my PSE7 catalog again?

    I had something similar (if not the same) happen. I was going to transfer some new shows from iTunes on my laptop into my iPod. The msg I get from iTunes: "iTunes cannot read the contents of the iPod "(iPod'S name)". Use the iPod Software Updater application to restore the iPod to factory settings." The best part....my iPod's empty! I don't know what happened but I tried to connect it to my work PC and it read the same. I can reload my iPod with songs/shows. That's not an issue BUT I'd like to know what may have caused this and how do I know it won't happen again?
    PC   Windows XP  

  • Frozen in "Do Not Disconnect" iTunes doesn't see iPod

    I have never had one bit of trouble with my iPod until today. I plugged it in, the Do Not Disconnect comes up, the clock is frozen, no charging happening and iTunes doesn't see the iPod. I tried the "restart" and nothing is working. What do I do?
    I haven't upgraded to iTunes 8.1 yet, would that help?
    HELP!

    OK, so I tried the Reset again. Still didn't work. THEN I saw this:
    Tip:
    +If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.+
    Tried it again and now it's all better.

  • TS1363 i have a new iphone 5 and although I had a little trouble downloading all my apps and music, i did this successfully but now when I connect to my itunes, itunes doesn't see it and also bluetooth doesn't seem to be working.Can  Anyone help

    I have a new iphone 5 and although I had a little trouble downloading all my apps and music, I did this successfully but now when I connect to my itunes, itunes doesn't see it and also bluetooth doesn't seem to be working.Can  Anyone help?

    Hey leafxxx,
    Thanks for the question, and welcome to Apple Support Communities.
    The following resource provides troubleshooting steps if your iPhone is not displayed in iTunes when connected:
    Apple - Support - iPhone - iTunes Troubleshooting Assistant
    http://www.apple.com/support/iphone/assistant/itunes/
    For more detailed instructions, see this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Enjoy your new iPhone 5!
    Matt M.

  • ITunes doesn't "see" my iPod Touch but Windows 7 does. What can I do?

    Windows 7 using "MTP USB Device" driver so it recognizes that it's an Apple iPod but iTunes doesn't see it. I have spent the entire day following the "install/ininstall/start AMDS/stop AMDS" instructions ad nauseum...still no love. Frustration maxed out!

    Did you try here:
    iOS: Device not recognized in iTunes for Windows
    Did you do this:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • Itunes doesn't see my iphone 5

    Just got a new phone, but when I plug it into my MacBook Pro iTunes doesn't see it as a device. iPhoto launches, so it is not invisible. It's just iTunes that won't wake up.
    Help!

    What version Itunes and mac software are you using?  iphone 5 needs certain requirements
    Does it read when you manually open itunes?
    Itunes also has settings for it to open when your device is connected, and seeing that its new, you have to resync it.

  • It appears since my Windows PC McAfee AV subscription expired my PC's iTunes doesn't see my two Apple TV2's.  My computer has internet connection thru router and my ATV has internet connection thru same router.  My iPad can see the ATV but it can't see iT

    My Windows PC iTunes doesn't see my two Apple TV2's (in the speaker button in lower right of iTunes), I believe this problem began when my PC's McAfee AV subscription expired.  My computer has internet connection thru router and my ATVs have internet connection thru same router so it's not a networking issue.  My iPad can see the ATVs but it can't see iTunes so the problem appears to be PC/iTunes related.  I turned the PC's firewall off but no joy.  I uninstalled the expired McAfee and still no joy.  Reboot = no joy.  Glass of scotch = no joy.  Need help!!

    Wanted to add that I turned on Home Sharing w/the same account in iTunes and ATVs.  And I've successfully streamed music/photos to my ATVs for over a year.

  • Is there a way to migrate or copy contents of my Address Book from an older Mac running OS10.4.11 to a new Mac running 10.10.2?  Migration Assistant in Yosemite says it doesn't support Address Book 10.4.11.

    Is there a way to migrate or copy contents of my Address Book from an older Mac running OS10.4.11 to a new Mac running 10.10.2?  Migration Assistant in Yosemite says it doesn't support Address Book 10.4.11.

    Cool!! You're welcome - but BDAqua (there's that name again!) deserves the credit (although I knew it too)
    So much for a Mac's claim of 'continuity' and 'ease of use' huh?
    BDAqua is a venerable friend of ours here... you will kick yourself!
    ÇÇÇ

  • ITunes doesn't see podcasts it has previously downloaded

    Hi,
    I use iTunes to download podcasts as mp3 files. I had to uninstall iTunes and install the latest version. All went well, but now iTunes doesn't see the mp3 files previously downloaded. Is there a way I can tell it to treat those mp3 files as podcasts it had downloaded?
    Many thanks, Dan

    I am having trouble getting a m4a podcast to download in my podcast feed also. I tried unsubscribing and subscribing again but that didn't help. I am using feedburner with smartcast enabled for all rich media files, so that shouldn't be a factor.
    This is the first time I have tried posting an enhanced podcast within my feed, however. This is my feed:
    http://feeds.feedburner.com/speedofcreativity/podcasts
    I read online that naming fileswith the m4b extension is more compatible, but that didn't work. I can use the direct link and in QuickTime choose file - open URL and it works. The feed is also updated and includes the latest post with this enclosure. So for some reason there is a problem with iTunes recognizing it. Very frustrating.
    Any suggestions anyone? Thanks

  • ITunes doesn't see my iPhone anymore after upgrading

    After upgrading to 10.3.1.55, when I plug my iPhone into the PC, iTunes hangs up for a while and then fails with an error E8000065. After it iTunes doesn't see my iPhone. Previously all worked flawlessly. What am I doing wrong?

    Yes, Allan, that's what I meant I've read almost all FAQs about that problem and executed all instructions step by step. No luck... All drivers & services are running Ok, the System log is free of errors, everything is looking fine... but doesn't work

Maybe you are looking for

  • Document Management System in KM

    hi experts, can anyone share few points on Document Management System life cycle. can anybody give me steps for DMLC thank you, vijai

  • Confused about extending the Sprite class

    Howdy -- I'm learning object oriented programming with ActionScript and am confused about the Sprite class and OO in general. My understanding is that the Sprite class allows you to group a set of objects together so that you can manipulate all of th

  • Magic Mouse - browser navigation backswipe not working.

    Hey, is anyone else having a failing experience using the back nagivagation swipe function of the magic mouse? As of OSX Mavericks install, the single swipe does not swipe back to previous pages visited. I am sure this is a bug, and kind of surprised

  • Everytime I try to copy and paste, Firefox stops responding. Why?

    Ever since I updated to the latest version of Firefox, if I try to copy and paste anything, Firefox stops responding. If I try to paste in another program such as Skype or AIM, that program stops responding too. What can I do to stop this?

  • Filtering random pulses on a FP-SG-140

    Hello, I am a bit of a newbie when it comes to filtering , I have tested using pt-pt averaging and median filters but I am hoping that I can reduce noise on the output a little more. My system consists of using a FP-SG-140, FP-RTD-124.  I am doing lo