ITunes doesn't "see" iPad

I have a new Macbook Pro 2.66 / 8 GB, 15" and an iPad and an iPhone. The problem is that every now and then - about once a day or so, iTunes doesn't see the iPad or iPhone when they are plugged in. The device starts charging but there is no indication that a sync is occuring.
Following the instructions here: http://support.apple.com/kb/HT1747 I reinstall iTunes and replace the AppleMobileDevice kexts and then things are fine, but after another day or so the problem occurs again. I have not been able to determine what might be causing that. Any idea?

This totally does not address the problem. I have had my iPad for only a few days and I'm about to return it. I've been able to sync it once, after installing a new OS, then uninstalling iTunes... and then it just grabbed everything/apps from my iPod, most of which I would not have put on the new machine. Now I want to sync the apps I've purchased on the iPad and some music/movies and the computer doesn't "see" the iPad at all.
Users should not have to wipe/restore the machine. If Apple insists on using iTunes as a portal for all things iPad, then iTunes needs a serious overhaul. It's a music tool now being used to hobble a much more dynamic machine.
Anyhow - I like the iPad, but Apple isn't really letting me use it if I have to sync via iTunes, but iTunes isn't a functional tool.
Thanks - please give me an option other than reinstalling iTunes many times a doy or returning my iPad.

Similar Messages

  • Itunes doesn't see ipad - and I've tried all the remedies

    My ipad 2 (ios5) isn't recognised as a device in iTunes on my iMac (running 10.6.8). I've tried all the fixes that apple recommends and tried all the suggestions on forums - updated software, different cables, ports etc. Nothing works. Any ideas?

    Here is my standard reply so you can match it against what you have already done -
    Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
    Secondly, try all the other ports on your computer, even a number of times.
    Thirdly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
    Failing all that, see here - http://support.apple.com/kb/TS1538 for Windows and http://support.apple.com/kb/TS1591 for Macs
    And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
    http://www.apple.com/support/ipad/assistant/itunes/

  • It appears since my Windows PC McAfee AV subscription expired my PC's iTunes doesn't see my two Apple TV2's.  My computer has internet connection thru router and my ATV has internet connection thru same router.  My iPad can see the ATV but it can't see iT

    My Windows PC iTunes doesn't see my two Apple TV2's (in the speaker button in lower right of iTunes), I believe this problem began when my PC's McAfee AV subscription expired.  My computer has internet connection thru router and my ATVs have internet connection thru same router so it's not a networking issue.  My iPad can see the ATVs but it can't see iTunes so the problem appears to be PC/iTunes related.  I turned the PC's firewall off but no joy.  I uninstalled the expired McAfee and still no joy.  Reboot = no joy.  Glass of scotch = no joy.  Need help!!

    Wanted to add that I turned on Home Sharing w/the same account in iTunes and ATVs.  And I've successfully streamed music/photos to my ATVs for over a year.

  • I can't sync or conect my iphone 5s, Itunes doesn't see it

    I can't sync or conect my iphone 5s, Itunes doesn't see it

    Hello Mparada,
    Thank you for usingApple Support Communities.
    Depending on which operating system is on your computer, one of these two articles should help you sort out what is going on.
    iOS: Device not recognized in iTunes for OS X - Apple Support
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
    Regards,
    Jeff D. 

  • Migration Assistant problem? : New iMac's iTunes doesn't see the catalog or playlist of my old Mac's songs on an external drive

    So I just migrated from a 10.7.5 iMac 27" from 2009 to 10.9.4 on a 2013 27" iMac with Fusion Drive.
    I don't use Time Machine. There are no backups involved here.
    Used Ethernet. Only took 20 hours... (BTW, it stayed on "less than 1 minute left" for like 12 hours but luckily I was away and just left it going in hopes it would work... and it did!)
    Anyway, back on my OLD iMac, I kept all of my songs on an external drive because my internal drive was too small. So iTunes looked at that drive for the music it was playing. I turned that drive off, even disconnected it, during the migration process because I thought it was confusing it during the first attempt which took 10 hours and nothing happened.
    So now it worked, finally. On my new iMac, running Mavericks, I now have two user accounts... the one that was set up when I started the computer the first time, and the new one that transferred over via Migration Assistant. No problem. I can live with that. The only thing is, I would still think the old XML files and library stuff would migrate over... but iTunes doesn't see it. When I open up iTunes, in *either* account, iTunes behaves as if it's brand new. Repeat: the old and new account on the new iMac, both, do not see an old iTunes library which IS on the old iMac. Only the music is on the external drive from what I understand.
    I've done this before so I know it's possible. I remember upgrading a long time ago and got iTunes to see my old library... even though some of the music was no longer there. It just puts "!" marks wherever there is no link. I was hoping that that's what I would find when I launched iTunes, but no luck. Even connecting the old hard drive to the new Mac (via USB) doesn't make iTunes all of a sudden "see" the old library. That data doesn't seem to be there. It didn't transfer over. Did it not transfer over because the songs weren't on the internal volume? Should I have left my external hard drive on?
    So.... now that I've spent almost 3 days total trying to get this to work, and everything is running... I don't want to have to start over in order to get iTunes to work.  Is there a way I can just drag over some XML files or something from the old computer? I don't want to lose all of the ratings and personal notes and everything.
    I should add also that I have like only four songs I've ever actually bought through iTunes. I'm still a bit old fashioned and buy CDs and rip them to Apple Lossless. So I hope it's not an authorization / reauthorization issue because I have like 1400 albums ripped.
    Thanks in advance for any help.
    --Jeff

    iTunes does not use the .xml it uses the .itl
    If you are sure your old library file migrated across (does the file size and modification dates suggest it has?) start iTunes while holding down the option/alt key and guide it to the .itl file to get it to use that one.

  • ITunes doesn't see PSE7 images

    I had Photoshop Elements 8 installed, and iTunes could see those photos just fine. But then my trial expired, so I had to uninstall and use PSE7. The problem is that iTunes no longer sees my PSE7 catalog and instead sees the PSE8 catalog as it was before it was uninstalled. I managed to track down where iTunes apparantly copied the PSE8 catalog and deleted it, but now iTunes doesn't see any PSE catalogs at all.
    Of course there is the option to sync with individual folders, but I'd rather not do that since PSE keeps them nice and organized, and iPod Touch doesn't show the folders within subfolders of the selected folder for photo syncing. So, how can I get iTunes to pick up my PSE7 catalog again?

    I had something similar (if not the same) happen. I was going to transfer some new shows from iTunes on my laptop into my iPod. The msg I get from iTunes: "iTunes cannot read the contents of the iPod "(iPod'S name)". Use the iPod Software Updater application to restore the iPod to factory settings." The best part....my iPod's empty! I don't know what happened but I tried to connect it to my work PC and it read the same. I can reload my iPod with songs/shows. That's not an issue BUT I'd like to know what may have caused this and how do I know it won't happen again?
    PC   Windows XP  

  • Frozen in "Do Not Disconnect" iTunes doesn't see iPod

    I have never had one bit of trouble with my iPod until today. I plugged it in, the Do Not Disconnect comes up, the clock is frozen, no charging happening and iTunes doesn't see the iPod. I tried the "restart" and nothing is working. What do I do?
    I haven't upgraded to iTunes 8.1 yet, would that help?
    HELP!

    OK, so I tried the Reset again. Still didn't work. THEN I saw this:
    Tip:
    +If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.+
    Tried it again and now it's all better.

  • TS1363 i have a new iphone 5 and although I had a little trouble downloading all my apps and music, i did this successfully but now when I connect to my itunes, itunes doesn't see it and also bluetooth doesn't seem to be working.Can  Anyone help

    I have a new iphone 5 and although I had a little trouble downloading all my apps and music, I did this successfully but now when I connect to my itunes, itunes doesn't see it and also bluetooth doesn't seem to be working.Can  Anyone help?

    Hey leafxxx,
    Thanks for the question, and welcome to Apple Support Communities.
    The following resource provides troubleshooting steps if your iPhone is not displayed in iTunes when connected:
    Apple - Support - iPhone - iTunes Troubleshooting Assistant
    http://www.apple.com/support/iphone/assistant/itunes/
    For more detailed instructions, see this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Enjoy your new iPhone 5!
    Matt M.

  • ITunes doesn't "see" my iPod Touch but Windows 7 does. What can I do?

    Windows 7 using "MTP USB Device" driver so it recognizes that it's an Apple iPod but iTunes doesn't see it. I have spent the entire day following the "install/ininstall/start AMDS/stop AMDS" instructions ad nauseum...still no love. Frustration maxed out!

    Did you try here:
    iOS: Device not recognized in iTunes for Windows
    Did you do this:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • Itunes doesn't see my devices

    I've recently plugged (USB cable) my ipod and my iphone in to the mac book pro that they are always plugged into for syncing and backing up via iTunes. However, now iTunes doesn't see these devices, nor any other devices I plug in.
    Anyone had this problem?

    Try the suggestions in this support document: 
    iOS: Device not recognized in iTunes for MAC OS X, http://support.apple.com/kb/TS1591

  • Itunes doesn't see my iphone 5

    Just got a new phone, but when I plug it into my MacBook Pro iTunes doesn't see it as a device. iPhoto launches, so it is not invisible. It's just iTunes that won't wake up.
    Help!

    What version Itunes and mac software are you using?  iphone 5 needs certain requirements
    Does it read when you manually open itunes?
    Itunes also has settings for it to open when your device is connected, and seeing that its new, you have to resync it.

  • ITunes doesn't see podcasts it has previously downloaded

    Hi,
    I use iTunes to download podcasts as mp3 files. I had to uninstall iTunes and install the latest version. All went well, but now iTunes doesn't see the mp3 files previously downloaded. Is there a way I can tell it to treat those mp3 files as podcasts it had downloaded?
    Many thanks, Dan

    I am having trouble getting a m4a podcast to download in my podcast feed also. I tried unsubscribing and subscribing again but that didn't help. I am using feedburner with smartcast enabled for all rich media files, so that shouldn't be a factor.
    This is the first time I have tried posting an enhanced podcast within my feed, however. This is my feed:
    http://feeds.feedburner.com/speedofcreativity/podcasts
    I read online that naming fileswith the m4b extension is more compatible, but that didn't work. I can use the direct link and in QuickTime choose file - open URL and it works. The feed is also updated and includes the latest post with this enclosure. So for some reason there is a problem with iTunes recognizing it. Very frustrating.
    Any suggestions anyone? Thanks

  • ITunes doesn't see my iPhone anymore after upgrading

    After upgrading to 10.3.1.55, when I plug my iPhone into the PC, iTunes hangs up for a while and then fails with an error E8000065. After it iTunes doesn't see my iPhone. Previously all worked flawlessly. What am I doing wrong?

    Yes, Allan, that's what I meant I've read almost all FAQs about that problem and executed all instructions step by step. No luck... All drivers & services are running Ok, the System log is free of errors, everything is looking fine... but doesn't work

  • ITunes doesn't see iPods

    starting last nite my iTunes doesn't see either iPod that always appeared when plugged in. I changed my connecting wire without any better results.

    Bentley, try downloading and re-installing iTunes. I had a similar problem on my Macbook - I could see my iPod in the Finder but iTunes couldn't see it. I re-installed iTunes and voila, it was there.

  • Itunes doesn't see iphone

    I've had to reinstall everything on my Macbook and now I try to plug in my iphone4 and itunes doesn't see it. The phone "knows" it's plugged in because it makes the noise when I plug it in.
    Any tips on how I can fix this?
    Thanks

    reinstall itunes on the apple website

Maybe you are looking for

  • Can't display image on TV from MacBookPro (using DVI to video adaptor)

    I purchased the apple "DVI to Video Adapter" to be able to use my TV as a display, but it isn't working despite help from the Apple help desk. I'm using a standard TV video cable that plugs into the yellow video input jack, with is a Hitachi full mul

  • How to update data returned using REF CURSOR

    Hi all, I am trying to update updated data in a gridview but the update button seem to do nothing as i retrieve data using REF CURSOR. Let me describe the architecture of my application first. I'm trying to implement best practice whenever possible.

  • How to add attachments to an order.

    Hello all. I am relatively new to CRM, so sorry for any terms incorrectly used. I am working on a function module that created orders using CRM_ORDER_MAINTAIN. So far I have been successful creating orders with different data, e.g. texts. Texts are s

  • Head of Own Organisational Unit

    Hi, When I unchecked the Head of Own Organisation Unit field for existing Manager under Basic Data, still I can see the Red Cap as Icon for the same Manager.  Please let me know the reason and how to fix the same. Thanks Rajesh K

  • ASA TCP Idle Connection Timeout Suspense

    Hello I upgraded our Cisco ASA 5520 with a Cisco ASA 5585. Though both ASA were configured with default TCP Idle Connection Timeout values people are now starting to complaint that idle SSH connections are being terminated. This is proper behavior bu