ITunes doesn't "see" my library

Good morning.
I recently purchased a G4 iBook. I used iPod Rip to move my music from the mini to my iBook. The music was put into folders under an iPod Rip folder. I moved these folder to the iTunes Library folder, however, iTunes doesn't see them.
How do I get this music to show up in my iTunes library?
Thanks.

File->Add to Library and choose the folder of music.
That should do the trick.

Similar Messages

ITunes doesn't see Aperture Library - iMovie doesn't see Aperture Library

Issues:
Nearly all of my videos in the Aperture/iPhoto library do not show up when I select iPhoto library option in iMovie and iMovie is unable to locate them in any other way. Sometimes the option to select the iPhoto library is completely missing.
iTunes does not recognize my Aperture library, and I get the following message:
"Your Aperture Library could not be found. Open the preferences window in Aperture and enable the preference to share previews with other applications." After reading through forums and multiple Genius Bar appointments here is most of what I have done:
Created multiple new Aperture libraries, selected them in Aperture, rebooted, switched back and forth - Note: iTunes DID recognize the new blank libraries
Booted Aperture with the Command + Option keys and run all three options to repair permssions and even rebuilt the database
Booted Aperture with the Option key and selected the library I was using all along (this worked for someone in a forum)
Opened iPhoto (not Aperture) and selected an option to share photos
Run "Verify Disk Permissions" many times under Disk Utility
Run "Repair Disk Permissions" many times under Disk Utility
Reinstalled OSX
Reinstalled Aperture
Reinstalled iTunes
Reinstalled iMovie
Run a virus and malware scan (no issues)
Verified that Aperture was set to share previews and had a Genius go through all of my options to ensure they were correct in iTunes, Aperture, and iPhoto
Have ran "Reset Home Directory Permissions and ACLs" from the Command + Option + R recovery partition multiple times. Each time it just hangs for hours, the latest attempt ran for over 24 hours before I finally stopped it.
Oh yes, and I found and deleted the file com.apple.iApps.plist
None of these things fixed either of my issues. According the the Genius at my last appointment, now I have to call Apple Care and pay to get support. I must have misunderstood what the Genius Bar was about when I bought my Mac and why I purchased the One to One training. Before I call Apple Care, I was hoping someone might have run across this and can help me.
I asked the Genius if I now need to just create a new Aperture Library and move all of my content to it (that was the last resort for someone in a forum); however, he was concerned that even if this might work that I probably have deeper permission and/or other issues that need to be addressed and that doing so would not fix the root cause.
Thanks for taking the time to read through this issue.

Understood. I thought perhaps the period meant that I was finished and just needed to call Apple Care and fork out the fee.
The formats are primarily .MOV straight from the iPhone. Since going to a Mac, I have pretty much given up on using my Sony Handycam for family videos due to the pains of having to locate, identify, convert, and export AVCHD video to watch on Apple TV. It is just too easy to take video with my iPhone and import it and immediately watch it, although the quality is nothing close to a dedicated video camera, especially indoors and in lower light. All of the video formats in Aperture are supported and most all of my older home videos and Sony Handycam videos are sitting on an external drive (hoping that one day I will have the time to figure out a decent workflow to access them after I work all of the bugs out of iMovie). Great thought though.
All my content is managed. After a handful of One-to-One sessions at the Apple Store, I finally learned that you could not reference videos in iMovie and had to either have them in the iMovie Events directory or in iPhoto (at least that was what she said). Their solution was to import the videos into iPhoto so they could be easily accessed in iMovie. After I had issues mentioned in this post their solution was for me to purchase Aperture that could handle larger libraries. This was supposed to fix the issue and allow iMovie to see my videos. When that didn't work they said that I needed to purchase Final Cut Pro. I'm just a Dad who wants to make a few memorable home movies for his family and I don't think that I should have to purchase a $300 application, especially after paying a premium for my Mac and the iLife software, which I am deeply regretting. But I digress.
I have repaired permissions again and am in the process of repairing the library and will rebuild it again if that doesn't work. It is taking longer so I won't be able to post the results until a later time. Definitely worth a shot to try this again.
If this doesn't work I will take the time to create a new Aperture library. Like I previously mentioned, this was the last resort for another gentlemen who had a similar issue. After doing this it might explain why the "Reset Home Directory Permissions and ACLs" from the Command + Option + R recovery partition is getting hung up and not working. I'll post the results at a later date. If I could save just one person the time, gas, and stress I've experienced it would be worth it.
One additional question? I read a gentlemen's post that passionately argued against ever using iPhoto, Aperture, or iMovie to ever manage video files. He suggested using folders and a file naming system similar to what I used when I was on a PC using Adobe Elements. Do you have any thoughts on that?
For my situation, I have two concerns:
I'm afraid this would not allow me to watch the videos on Apple TV as simply as I can now (although I don't know this to be the case for certain). If the videos aren't in my photo library, I'm not sure how I would be able to access them through Apple TV.
Since I'm a proud Dad I have hundreds of video files spanning many years, so I also don't want to lose the ability to quickly peruse my event library and find content that I want to import into a project in iMovie. At one point I imported some video files to edit that weren't stored in iMovie, and I could only see the file name and date and had to guess if there was content on it that I wanted. When you have hundreds of clips like I do that isn't practical.
He argued that these programs were never meant to manage content and worked much more efficiently using this method. I'd be very interested to hear your thoughts.
Thanks again.

Migration Assistant problem? : New iMac's iTunes doesn't see the catalog or playlist of my old Mac's songs on an external drive

So I just migrated from a 10.7.5 iMac 27" from 2009 to 10.9.4 on a 2013 27" iMac with Fusion Drive.
I don't use Time Machine. There are no backups involved here.
Used Ethernet. Only took 20 hours... (BTW, it stayed on "less than 1 minute left" for like 12 hours but luckily I was away and just left it going in hopes it would work... and it did!)
Anyway, back on my OLD iMac, I kept all of my songs on an external drive because my internal drive was too small. So iTunes looked at that drive for the music it was playing. I turned that drive off, even disconnected it, during the migration process because I thought it was confusing it during the first attempt which took 10 hours and nothing happened.
So now it worked, finally. On my new iMac, running Mavericks, I now have two user accounts... the one that was set up when I started the computer the first time, and the new one that transferred over via Migration Assistant. No problem. I can live with that. The only thing is, I would still think the old XML files and library stuff would migrate over... but iTunes doesn't see it. When I open up iTunes, in *either* account, iTunes behaves as if it's brand new. Repeat: the old and new account on the new iMac, both, do not see an old iTunes library which IS on the old iMac. Only the music is on the external drive from what I understand.
I've done this before so I know it's possible. I remember upgrading a long time ago and got iTunes to see my old library... even though some of the music was no longer there. It just puts "!" marks wherever there is no link. I was hoping that that's what I would find when I launched iTunes, but no luck. Even connecting the old hard drive to the new Mac (via USB) doesn't make iTunes all of a sudden "see" the old library. That data doesn't seem to be there. It didn't transfer over. Did it not transfer over because the songs weren't on the internal volume? Should I have left my external hard drive on?
So.... now that I've spent almost 3 days total trying to get this to work, and everything is running... I don't want to have to start over in order to get iTunes to work. Is there a way I can just drag over some XML files or something from the old computer? I don't want to lose all of the ratings and personal notes and everything.
I should add also that I have like only four songs I've ever actually bought through iTunes. I'm still a bit old fashioned and buy CDs and rip them to Apple Lossless. So I hope it's not an authorization / reauthorization issue because I have like 1400 albums ripped.
Thanks in advance for any help.
--Jeff

iTunes does not use the .xml it uses the .itl
If you are sure your old library file migrated across (does the file size and modification dates suggest it has?) start iTunes while holding down the option/alt key and guide it to the .itl file to get it to use that one.

Itunes doesn't see my apple tv on my new pc

I downloaded itunes and installed it on my new pc but itunes doesn't see my apple tv on my network. Any help. Thanks.

did you try using the setting feature on ATV and point ATV to your new computer's itunes library. That's where you enter a new 5 digit code.

ITunes doesn't see PSE7 images

I had Photoshop Elements 8 installed, and iTunes could see those photos just fine. But then my trial expired, so I had to uninstall and use PSE7. The problem is that iTunes no longer sees my PSE7 catalog and instead sees the PSE8 catalog as it was before it was uninstalled. I managed to track down where iTunes apparantly copied the PSE8 catalog and deleted it, but now iTunes doesn't see any PSE catalogs at all.
Of course there is the option to sync with individual folders, but I'd rather not do that since PSE keeps them nice and organized, and iPod Touch doesn't show the folders within subfolders of the selected folder for photo syncing. So, how can I get iTunes to pick up my PSE7 catalog again?

I had something similar (if not the same) happen. I was going to transfer some new shows from iTunes on my laptop into my iPod. The msg I get from iTunes: "iTunes cannot read the contents of the iPod "(iPod'S name)". Use the iPod Software Updater application to restore the iPod to factory settings." The best part....my iPod's empty! I don't know what happened but I tried to connect it to my work PC and it read the same. I can reload my iPod with songs/shows. That's not an issue BUT I'd like to know what may have caused this and how do I know it won't happen again?
PC Windows XP

Frozen in "Do Not Disconnect" iTunes doesn't see iPod

I have never had one bit of trouble with my iPod until today. I plugged it in, the Do Not Disconnect comes up, the clock is frozen, no charging happening and iTunes doesn't see the iPod. I tried the "restart" and nothing is working. What do I do?
I haven't upgraded to iTunes 8.1 yet, would that help?
HELP!

OK, so I tried the Reset again. Still didn't work. THEN I saw this:
Tip:
+If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.+
Tried it again and now it's all better.

TS1363 i have a new iphone 5 and although I had a little trouble downloading all my apps and music, i did this successfully but now when I connect to my itunes, itunes doesn't see it and also bluetooth doesn't seem to be working.Can Anyone help

I have a new iphone 5 and although I had a little trouble downloading all my apps and music, I did this successfully but now when I connect to my itunes, itunes doesn't see it and also bluetooth doesn't seem to be working.Can Anyone help?

Hey leafxxx,
Thanks for the question, and welcome to Apple Support Communities.
The following resource provides troubleshooting steps if your iPhone is not displayed in iTunes when connected:
Apple - Support - iPhone - iTunes Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/itunes/
For more detailed instructions, see this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Enjoy your new iPhone 5!
Matt M.

ITunes doesn't "see" my iPod Touch but Windows 7 does. What can I do?

Windows 7 using "MTP USB Device" driver so it recognizes that it's an Apple iPod but iTunes doesn't see it. I have spent the entire day following the "install/ininstall/start AMDS/stop AMDS" instructions ad nauseum...still no love. Frustration maxed out!

Did you try here:
iOS: Device not recognized in iTunes for Windows
Did you do this:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Itunes doesn't see my devices

I've recently plugged (USB cable) my ipod and my iphone in to the mac book pro that they are always plugged into for syncing and backing up via iTunes. However, now iTunes doesn't see these devices, nor any other devices I plug in.
Anyone had this problem?

Try the suggestions in this support document:
iOS: Device not recognized in iTunes for MAC OS X, http://support.apple.com/kb/TS1591

Itunes doesn't see my iphone 5

Just got a new phone, but when I plug it into my MacBook Pro iTunes doesn't see it as a device. iPhoto launches, so it is not invisible. It's just iTunes that won't wake up.
Help!

What version Itunes and mac software are you using? iphone 5 needs certain requirements
Does it read when you manually open itunes?
Itunes also has settings for it to open when your device is connected, and seeing that its new, you have to resync it.

It appears since my Windows PC McAfee AV subscription expired my PC's iTunes doesn't see my two Apple TV2's. My computer has internet connection thru router and my ATV has internet connection thru same router. My iPad can see the ATV but it can't see iT

My Windows PC iTunes doesn't see my two Apple TV2's (in the speaker button in lower right of iTunes), I believe this problem began when my PC's McAfee AV subscription expired. My computer has internet connection thru router and my ATVs have internet connection thru same router so it's not a networking issue. My iPad can see the ATVs but it can't see iTunes so the problem appears to be PC/iTunes related. I turned the PC's firewall off but no joy. I uninstalled the expired McAfee and still no joy. Reboot = no joy. Glass of scotch = no joy. Need help!!

Wanted to add that I turned on Home Sharing w/the same account in iTunes and ATVs. And I've successfully streamed music/photos to my ATVs for over a year.

ITunes doesn't see podcasts it has previously downloaded

Hi,
I use iTunes to download podcasts as mp3 files. I had to uninstall iTunes and install the latest version. All went well, but now iTunes doesn't see the mp3 files previously downloaded. Is there a way I can tell it to treat those mp3 files as podcasts it had downloaded?
Many thanks, Dan

I am having trouble getting a m4a podcast to download in my podcast feed also. I tried unsubscribing and subscribing again but that didn't help. I am using feedburner with smartcast enabled for all rich media files, so that shouldn't be a factor.
This is the first time I have tried posting an enhanced podcast within my feed, however. This is my feed:
http://feeds.feedburner.com/speedofcreativity/podcasts
I read online that naming fileswith the m4b extension is more compatible, but that didn't work. I can use the direct link and in QuickTime choose file - open URL and it works. The feed is also updated and includes the latest post with this enclosure. So for some reason there is a problem with iTunes recognizing it. Very frustrating.
Any suggestions anyone? Thanks

ITunes doesn't see my iPhone anymore after upgrading

After upgrading to 10.3.1.55, when I plug my iPhone into the PC, iTunes hangs up for a while and then fails with an error E8000065. After it iTunes doesn't see my iPhone. Previously all worked flawlessly. What am I doing wrong?

Yes, Allan, that's what I meant I've read almost all FAQs about that problem and executed all instructions step by step. No luck... All drivers & services are running Ok, the System log is free of errors, everything is looking fine... but doesn't work

ITunes doesn't see iPods

starting last nite my iTunes doesn't see either iPod that always appeared when plugged in. I changed my connecting wire without any better results.

Bentley, try downloading and re-installing iTunes. I had a similar problem on my Macbook - I could see my iPod in the Finder but iTunes couldn't see it. I re-installed iTunes and voila, it was there.

Itunes doesn't see iphone

I've had to reinstall everything on my Macbook and now I try to plug in my iphone4 and itunes doesn't see it. The phone "knows" it's plugged in because it makes the noise when I plug it in.
Any tips on how I can fix this?
Thanks

reinstall itunes on the apple website

ITunes doesn't "see" my library

Similar Messages

Maybe you are looking for