ITunes doesn't show any artists...

Well it does... but I can only seem to see the artists/albums that iTunes is "featuring" or are "new" ...
How do I gain acess to the rest of the library??I KNOW for a FACT that iTunes has Juno Reactor in their library, available for purchase... so how do I find them without having to do a search?

Thanks! This is exactly what I was looking for. They should put some kinda warining on this stuff when they move things to stupid locations, and elimiate some parts... like iPod Updater is now IN iTunes... well THANKS APPLE for putting up a note that tells me that! I had no idea, went around looking for the updated for an hour before I realized it no longer existed.
Well thank you for bringing back the whole reason I liked iTunes to begin with. The new "intro" force-feed you junk you don't want/need page is really annoying. APPLE PLEASE GO BACK TO A SIMPLE, IMMEDIATE browsing system...
Or is there a way to default to this Browse setting all the time so I don't have to see all the commercial junk??

Similar Messages

  • I have just changed internet providers from BT to Virgin, and now my iTunes doesn't show any of my airport express devices.

    I have just changed internet providers from BT to Virgin, and now my iTunes doesn't show any of my airport express devices.  I assume that I have to reconfigure them to the the new wireless but how do I do this frmo my PC?  Thanks

    I would recommend that you start by performing a "factory default" reset on each of your AirPort Express base stations. Once completed, you can use the following Apple Support article to configure each base station for streaming.

  • Itunes doesn't show any app updates

    Hi folks,
    iTunes doesn't show any app updates. On my iPhobe and iPad there are updates in the app store... Any hints?
    Thanks
    Pat

    Same problem here
    I can see I have updates on iPhone or iPad but nothing on iTunes

  • My iTunes  doesn't show any of the dropdown menus at the top, ex. file, help... help!

    All that has been cut out is my music from below.  I don't see any of the menus and my Ipod is not being detected by itunes, or at least it doesn't show that it is detecting it!

    Cntrl + B will display the Menu.
    Cntrl + S will display the Sidebar.

  • After reinstallation and upgrade to 10.5.6, itunes doesn't show any music

    Hi all
    I did a clean install of my boot drive to 10.5.2.
    Then I updated with the combo updated to 10.5.6.
    I also updated iTunes to 8.0.2.
    The problem is that iTunes does not find my music library, which lives on a separate hard drive that I did not touch when reinstalling. No music is displayed in iTunes.
    In Prefs-Advanced-iTunes Music Folder Location, I've tried both the "iTunes Music" folder (which has all the subfolders of albums etc) and the folder above that, which also contains the Album artwork folder, some itdb files etc. But nothing shows up.
    Any thoughts?
    /p

    Try opening iTunes while holding down the option key. When you get a dialog box with "create a new library" or "choose a library", select the choose option and navigate to the library on your external HD.
    BTW: If your external HD is not powered on and mounted before opening itunes, iTunes will create a new blank library.

  • ITunes doesn't show any of my music!! HELP!

    I opened my iTunes today and all my music was GONE. I looked in the iTunes folder, and all the files were there but under the iTunes Music Library xml file, all the data was gone. HELP!

    Hi.
    You can re-import the music by dragging the folder to iTunes, but if the library file is missing, then you play count and history may be lost.
    You could try using Spotlight to search for the file, but files don't move themselves so it is unlikely to be in another location.
    My recommendation is to re-import the music to iTunes as this will create a replacement.
    Let me know if i can be of any assistance
    Vic

  • I have a touch 3.1.3  My computer hard drive failed and is not recoverable.  How do I get the songs and pictures on the IPOD back on to the new computer.  Right now, Itunes doesn't show any music or pictures or books.

    I bought a new computer but I don't know how to make what is on the ipod go back into my new computer so I don't loose them all.

    See this support article:
    http://support.apple.com/kb/HT1848
    You can also download at least some of your content (audiobooks being a notable exception) again from the iTunes Store:
    http://support.apple.com/kb/ht2519
    For additional instructions, particularly for content not purchased from the iTunes Store, check out this user tip from TuringTest:
    https://discussions.apple.com/docs/DOC-3991
    and this page on "How-to Geek":
    http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

  • Installed new OS and now iTunes doesn't show any of my apps, music, etc.  They don't show on my phone either.  But i can find them on my computer iTunes folder.  any ideas on what's happening?  how do i get everything back.

    installed OS 5 but it froze up.  had to restore my phone.  then i tried to sync with my iTunes but my iTunes folders are completely empty.  But all the files are on my computer. how do i make my phone find those files and sync

    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Hope this helps,
    JD

  • I just update my iPhone which was previously jailbreaked when i update it after downloading all the file it start to show the apple logo for a moment and it went and completely turned off i tried to connect through iTunes but it doesn't show any iPhone

    i just update my iPhone which was previously jailbreaked when i update it after downloading all the file it start to show the apple logo for a moment and it went and completely turned off i tried to connect through iTunes but it doesn't show any iPhone connected to itunes

    No support for jailbroken phones will be given in this forum or from Apple.
    Unauthorized modification of iOS has been a major source of instability, disruption of services, and…

  • ITunes doesn't show even though open, then freezes all applications

    To continue the title of the thread "iTunes doesn't show even though open, then freezes all applications and warns me of a failed raid 1 array on shutdown, even though it works fine"
    Hi, I have this problem where I press the iTunes shortcut and nothing happens. I look a the processes and itunes.exe is running using its normal 34mb of ram (or something like that). After I've done this, if I try to load firefox or IE, they also freeze and won't load.
    Then when I goto restart it warns me of iaamonitor notify app. After googling, I leanrt this is something to do with failing raid 1 arrays, but everything is fine.
    I am now in vista on the same pc using dual boot, where iTunes is running fine, but since this problem has started I have tried deleteing the itunes stuff from application data in the documents and settings, deleting the my music folder, turning off all services and startup that isnt microsoft in msconfig and uninstalling and reinstalling itunes and quicktime. Nothing has worked.
    Can anybody help me? I've read so many pages from google that this seems to of happened to a fair few people in the past and I don't want to have to resort to formatting my PC. Any help would be very appreciated.

    Thank you! You guys are the best! It would have taken me awhile to figure that one out! These Support Discussions have helped me out over and over.

  • My App Store Doesn't Show Any Thing , and not working .

    Today I've Noticed that My App Store Application is Not Working , and even I Can't Click On any Tabs ,and all of menu bar items such as sign out,sign in doesn't work . and doesn't Show Loading Status Bar, and doesn't show any message as you see in this picture :
    I've Tried There Solutions:
    Reset PRAM
    Delete App Store Cache Files
    Signed Out of Itunes And and signed in again
    clear History and web site data in safari
    But Nothing Changed .
    (Sorry My English is Not Good at all , But i'll be thankful if you help me )

    Test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
    Step 1
    Sign in to the App Store by selecting Sign In from the Store menu. If you're already signed in, sign out and then sign in again.
    Step 2
    Log out or restart the computer.
    Step 3
    Remove or disable "LittleSnitch" or any similar third-party software that blocks outgoing network connections according to the developer's instructions.
    Step 4
    Start up in safe mode and log in to the account with the problem.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    After testing, restart as usual (not in safe mode.)
    Step 5
    If possible, connect to a different network and test.
    Step 6
    There are reports that resetting the PRAM may solve the problem in some cases. I can't confirm.

  • On second computer, ITunes doesn't show songs on IPhone

    Having dowloaded ITunes on new Vista pc, when hooking up IPhone, ITunes recognizes my acct and the memory taken up by music but doesn't show any of the several hundred songs on IPhone
    HELP!

    Before reformatting your computer's hard drive or reinstalling Windows - this is important because you will probably be reinstalling Windows again in the not too distant future, you can back up your entire iTunes library - it is in a single iTunes named folder. This will include playlists, playcount, etc.
    Have you reauthorized your computer with your iTunes account with iTunes?
    iTunes includes an option to transfer iTunes content from an iPod or iPhone that was purchased from the iTunes store, but this is for iTunes content that was purchased from the iTunes store only. After you have reauthorized your computer with your iTunes account with iTunes, with your iPhone connected and without syncing, at the iTunes menu bar go to File and select Transfer Purchases From - the name of your iPhone.
    If any 3rd party apps do not transfer to your iTunes library, you can re-download purchased apps and you won't be charged again as long as you use the same iTunes account that was used to purchase the app originally.
    An iPod supports disk mode, so the iPhone not supporting disk mode has nothing to do with DRM. Security and "whatnot" is important. As a Windows user with constant virus, adware, and spyware concerns, you should welcome a company that takes security seriously and does something about it. I guess after suffering with Windows for so long getting used to constant security concerns and "whatnot", I guess Apple shouldn't be so concerned about security making Windows users feel more at home giving you the ability to use the device any way you want and the same for hackers and script kiddies? Sorry, but you can stick with Windows and Windows Mobile for that.

  • HT1430 my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

    my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

    There is a hardware problem.  Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.

  • BPEL Console doesn't show any instances created

    Hi,
    We are using file protocol to read the files from trading partner into B2B. File is successfully processes by B2B. I can see that in reports.
    Then I have defined a BPEL process to Dequeue the messages from B2B using AQ Adapter, transforms and places the files in the local file system.
    The BPEL process is simple flow with one receive , transform and invoke activity.
    I have configured AQ adapter using WSIF browser. I can see the deployed document definition in browser.
    I have the TP agreement deployed, BPEL process deployed, but I don't see the 850 file processed. BPEL Console doesn't show any instances created. How would I know where what went wrong?
    Please help.

    Try using java oracle.tip.adapter.b2b.data.IPDequeue to dequeue the message and see if you can dequeue
    Then you'l be able to pin point if the issue is with your BPEL or with B2B Queue's
    Kalyan

  • "Dependecies" tab doesn't show any information for a selected table version 4.0

    Hello,
    I work with SQL Developer 4.0.0.13. I can see 20 tables in the list. When I select one table, in the tabs on the right side I can see information for "columns" and "data" and "constraints" and "indexes"... but the tab "Dependencies" doesn't show any information about references between this table and other tables in the schema.
    Oracle database is v11.2
    Can you please tell me what do I need to do in order to see information on "Dependencies" tab for a table?
    Thank you,
    Milan

    Hi, here is my example of XML extension showing referencing tables:
    Save the following XML to a file.
    <items>
      <item type="editor" objectType="TABLE">
        <title><![CDATA[*Referencing Tables]]></title>
          <query>
            <sql><![CDATA[SELECT
      cfk.owner "OWNER",
      cfk.table_name "TABLE NAME",
      cols.column_name "COLUMN",
      cfk.constraint_name "CONSTRAINT NAME",
      cfk.delete_rule "DELETE RULE",
      'SQLDEV:LINK:' || cfk.owner || ':TABLE:' || cfk.table_name ||
      ':oracle.dbtools.raptor.controls.grid.DefaultDrillLink' "LINK"
    FROM
      sys.all_constraints cpk,
      sys.all_constraints cfk,
      sys.all_cons_columns cols
    WHERE
      cpk.owner = :OBJECT_OWNER AND
      cpk.table_name = :OBJECT_NAME AND
      SUBSTR(cpk.table_name, 1, 4) != 'BIN$' AND
      SUBSTR(cpk.table_name, 1, 3) != 'DR$' AND
      cpk.constraint_type in ('P', 'U') AND
      cfk.r_owner = cpk.owner AND
      cfk.r_constraint_name = cpk.constraint_name AND
      cfk.constraint_type = 'R' AND
      cols.owner = cfk.owner AND
      cols.constraint_name = cfk.constraint_name
    ORDER BY
      cfk.owner, cfk.table_name, cfk.constraint_name,
      cols.column_name]]>
          </sql>
        </query>
      </item>
    </items>
    In SQLDeveloper select Preferences -> Database -> User Defined Extensions and click <Add Row>.
    In the "Type" field enter "EDITOR" and in the "Location" field enter the path to the file with XML.
    After restarting SQLDeveloper You should see a new tab "*Referencing Tables" for tables.

Maybe you are looking for