Itunes doesnt detect ipod but has with different ipod
I just bought a used apple ipod after my old one was dropped in my drink and shorted out. I downloaded the ipod updator like it told me after saying that i needed for itunes to detect my ipod and restarted my computer after installing. Even this new 6.0 version says the same error. I really need help on this one. Thanks, Jesse
hi jesse!
I downloaded the ipod updator like it told me after saying that i needed for itunes to detect my ipod and restarted my computer after installing.
just checking on something first. after you installed the ipod updater, did you then run the ipod updater (in in "start > all programs > ipod"), connect the ipod when prompted to do so by the program, and then connect the ipod to the AC adapter for the firmware flash?
love, b
Similar Messages
-
Hey, my ipad is disabled and i cant open. i tried connecting it with itunes in recovery mode to restore it but it wont work it doesnt show and options itunes doesnt detect my ipad in recovery mode. what do i do know? please help!!!
If you followed these instructions and you were unable to enter recovery mode, I'm still leaning toward a hardware problem. Also, since you have IOS-7, read this. It might help.
-
I want to sync the songs on my Mac to my iPod, but it says, 'An iPod can only be synced to one iTunes Library at a time. Erasing and syncing replaces the contents of this iTunes Library.' Will this reset my iPod completely (my iPod is 4th gen)?
Was your iPod associated with a different mac or pc previously is all. And was it backed up or sync'd on this mac with iTunes previously.
http://www.apple.com/support/itunes -
I downloaded 21 songs recently to iTunes and they won't sync with my ipod. 1st time this has happened. Any ideas to download these songs would be appreciated.
I had some time finally figuring why I could buy and download from the Itunes store, but could not load it on my IPOD. What finally worked was plugging my IPOD in to the computer, as I would when "syncing", and, after loading, it would show my device in the side bar. You have to go to VIEW in the top Tool Bar and click on SHOW SIDE BAR in the drop down menu. "SUMMARY' tab, on top, is what I clicked on to show an option of restoring my IPOD to the factory defaults. It erases everything on the IPOD, but gives an option of AUTOFILL afterwards, which it does from the computer. This is one solution of many you could try. Good luck.
-
I purchased a new iMac, I have an old iPod mini I am trying to sync my iTunes library on my new Mac with my iPod. I purchsed additional music yesterday but I cannot get it to sync to load the music from my computer to my iPod.
From Here http://support.apple.com/kb/HE37
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs. -
My iPod Mini 3rd Generation isn't recognized in My Computer or iTunes. I can't even restore it without iTunes. The same thing happened with my iPod Nano 3rd Generation, but that one worked for a while, and suddenly went unrecognized.
Hi TherAscendedSaiyan,
Welcome to Apple Support Communities.
See this troubleshooting article that addresses the symptom you're encountering:
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/TS1369
Best,
Jeremy -
My itunes doesnt detect Iphone 5
My itunes doesnt detect Iphone 5, why... please advise....
You can not activate it without a SIM. If it is carrier locked, the SIM must be from the carrier it is locked to.
The SIM does not have to be tied to an active line of service, but it MUST be present. -
I downloaded a WMA audiobook from library using Overdrive. It shows up on my Itunes listing of Audiobooks on my Ipod, but on the actual Ipod it only shows up on Playlists. It is marked as an audiobook in Options | Media Kind. It is also marked to Remeber Position, but it does not do that. How do I get it to show up under Audiobooks and remember the position? I have a 4th Gen Ipod running Ios5
Check out the instructions for a work around on this post: https://discussions.apple.com/message/18702732#18702732
This worked for me. I would like to see Apple fix this issue, as it isn't very fun to have to do this for every downloaded book. -
How do I copy purchases between 2 itunes libraries on the same computer with different log ins and separate apple user ids?
Load the library which doesn't contain the songs and drag them into the open iTunes application window. If you need to move them between different computer user accounts, put them into /Users/Shared/.
(74502) -
When i tried to sync my new iPhone to Itunes, I accidentally clicked on sync with my ipod, instead of creating a new one. So now my iphone is the replica of my ipod, deleting my contacts and pictures etc. Is there a way to get it restored?
Only if a backup of the iPhone with all that data on it exists. If one does, restore the iPhone using that backup.
-
I am getting the following error when I right click on a package in solution explorer and execute using SQL Server 2014:
Project consistency check failed. The following inconsistencies were detected: package.dtsx. has a different ProtectionLevel than the project.
Luckily my solution only has 10 packages. I have verified and re-verified that everyone is set to dontsavesensitive.
I have verified and re-verified that the solution has the protection level to dontsavesensitive.
What on earth is going on here? I am using windows authentication and have no need for the package to save any sensitive information, nor should there be any.
Can someone please help me out here?
The Degenerate DimensionHi MMiligan,
Just as the error message said, the exactly issue is that the package package.dtsx has a different ProtectionLevel property value than the project.
So please double check the value of project ProtectionLevel property, like DontSaveSensitive, then make sure all packages in the project use the same ProtectionLevel value.
If there is still an error message indicated that some packages use a different value, please right-click the indicated package to select View Code, then make sure there is a line like below(the DontSaveSensitive
protection level corresponds to the value of 0):
DTS:ProtectionLevel="0"
The following similar thread is for your reference:
http://stackoverflow.com/questions/18705161/protection-level-changed-mid-project-now-project-wont-build
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support -
How can we transfer games from ipod 4 to a different ipod 4
how can we transfer games from ipod 4 to a different ipod 4??
Follow the instructions here or here; using the first set of instructions then requires syncing the second device with the iTunes library containing the content. If you want to transfer the game data as well, perform a backup and restore.
(91068) -
iPod 4 has a message "iPod is disabled. Try again in 23,317,746 minutes." Cannot do anything. Have turned off and on. No buttons appear on screen. Message is at the top of the screen.
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
If you previously synced to the computer then you may be able to recover use of the iPod without erasing the iPod by following the instructions here:
Disabled Recovery-must use syncing computer. -
i have several ipod nanos. i can sync one, but since i connected the ipad 2 I am getting an error on two of them, it says cannot sync, error 13019. the loaded songs show on the computer (on the ipods), but not when the ipod is plugged off the usb. Any answers? please
You can sync your iPod with multiple computers, but what can be synced is very limited. See this article for more details.
http://support.apple.com/kb/ht1202
B-rock -
I WANT TO KNOW IF THE SONY BLUETOOTH Wireless Transmitter for iPod® IS COMPATIBLE WITH THIS IPOD CLASSIC 160 GB (THE OLD ONE)
According to it's page on Sony's website, it should be compatible with all Classic models.
http://www.sonystyle.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10151& catalogId=10551&langId=-1&productId=8198552921665274447#features
So I would say yes.
B-rock
Maybe you are looking for
-
Can't reset/put in disk mode
I got a 4G 20GB iPod for cheap to play with and try to get to work. When I plug it in to my computer (Win XP Pro) with the USB cable the Apple logo flashes on screen and then the sad face iPod icon. Then the battery icon appears. Every once in a whil
-
How to get the values of a multiple radiobutton selection?
Hi. I have the next region source: FOR c1 IN(SELECT rownum, ttexto_opcion, id_item FROM tb_opciones where id_prueba=:p_id_prueba) LOOP HTP.P(APEX_ITEM.radiogroup(1,c1.ttexto_opcion,1)||c1.ttexto_opcion); END LOOP; That query returns a list of records
-
HELP PLEASE - HP Laserjet wireless set-up on Mac
Please help me - I can not set-up my HP Laserjet M1217 nfw printer on my wireless network (for wireless printing). I am fully aware of, BUT can't access the wireless configuration utility via the Embedded Web Server. I have checked to make sure the
-
When I hook up my 4gig Nano(2nd gen) to my car stereo the album artwork on the screen is poor quality. My friend's 120gig displays HD quality. What does his ipod have that mine doesn't?
-
Fail to check the VBR import option
I had this problem since iTunes previous version in my PC. I thought a newer version will solve it, but not even with iTunes 5.0, here is the problem: I try to set the CD import option to VBR, but I fail to really set this option, I have captured the