Itunes don't detect my ipad via wlan

I've installed latest version of itunes on my pc.
I like to sync iphone via usb and ipad via wlan. iphone is dedected ipad not. Except ipohone is not connected and pc is newly started. In this state ipad is detected and synced.
So i think all konfigurations are done as a sync is possible.
Where is the button to tell the pc to search for the ipad?
thanks for support or hint.
ramon

Hi ramon8591,
If you are having issues with Wi-Fi syncing between your iPad and iTunes on your Windows machine, you may want to take a look at the troubleshooting steps in the following article:
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
Cheers,
- Brenden

Similar Messages

  • Itunes don't detect my ipad

    itunes don't detect my ipad
    who can help me ?
    my ipod work normaly with itunes
    my computer detect my ipad (ipad 2)
    i've got windows xp pro
    i try all i see in apple website
    a few minutes ago i did re install i tunes and it's the same thing

    I got a iphone 4, and had the same problem. Do you by chance have megakey or megaupload installed on your pc? If so, uninnstall them, reboot, then connect your ipad and start itunes. I hope this works as good for you as it did for me. Good luck!

  • I tried to restored my iPad1's iOS5 to factory setting. There are error messages. Now my iTunes could not detect my iPad anymore. How can I proceed from here?

    Hi All,
    I have problems with iOS5 installed on my iPad1.
    After successfully installing the new iOS5, my iPad1 apps are jumbled up with my wife's apps.  Some of my paid apps are missing.
    So, i tried to restore to factory default.  Now, my iTunes could not detect my iPad, and my iPad only shows the picture "to connect iPad to iTunes".
    I restarted my iMac and checked that all softwares are up to date.
    Please advise.
    Many thanks.

    If you restored from a backup, you simply restored the corrupt files again.
    You could find the corrupt file through a slow process of eliminating apps and data - removing all content - and then syncing content back again - slowly adding apps back on - until the problem surfaces again - and the you could pin down the last apps or apps that you just added as being the problem apps/files. You may find the corrupt file - and you may not.
    Your backups can be deleted by going to iTunes on you computer and go to Edit>Preferences>Devices. You will see your backups/backups in that window. Click on the backup and then click on delete backup - if that is what you really want to do.

  • ITunes can't detect my iPad Mini. Please help :(

    Please help!
    My iTunes can't detect my iPad, but it's normally connected to my PC.
    I've already had my iOS 8 and upgraded iTunes to 11.4.
    I did anything I can to fix this problem but iTunes just can't detect it. I've already searched everything to fix this. Ugh, I'm so frustrated. please help me

    Hi Gracegb,
    I'm not sure which steps in this article you've tried other than updating software, but please check it out.
    iOS: Device not recognized in iTunes for Windows
    Thank you for thinking of Apple Support Communities for your support needs.
    Nubz

  • IPad2 won't sync with iMac...only my iphone4 shows in the device window on my iMac.  For some reason it will not detect my iPad via my wireless network!

    iPad2 won't sync with iMac and only my iphone4 shows in the devices window on my iMac.  For some reason it will not detect my iPad via my wireless network!   The iPad will sync when plugged into the Mac however looses connection and disappears from the device window when unplugged.

    Jayplus wrote:
    I have a D-Link WBR-2310 and already bought an external antenna which cost me additional. Besides moving my iMac, what options do I have?
    You already have a wireless router or have just bought one, or do you have an ad hoc connection from iMac to AppleTV?
    If things worked in the other location this all point to poor network performance/connectivity. It may be the connection is intermittently lost - small files transfer ok, but interruptions during longer transfers scupper the process.
    Interference from cordless phone bases or microwaves (and neighbours devices) might also cause connectivity issues.
    Signal strength bars are often not that useful, but will indicate connection to the main wireless device they connect to - so AppleTv may have a good connection to the router but a poor iMac connection to router is not displayed by AppleTV which only shows the connection to the first device in the chain.
    You could consider some home mains newtorking plugs such as those made by Devolo but they usually have to be on the same mains ring.

  • ITunes unable to detect my ipad, how to fix it :(

    iTunes unable to find my iPad ..someone pls tech me how to fix it.. Thanks in advance

    Are you trying to connect through a hub? If so, plug it into the computer itself. iOS5 doesn't like hubs that much anymore.
    Have you uninstalled and reinstalled iTunes? Sometimes the driver gets corrupted and a reinstall will fix that.
    Also try different USB ports. If you're plugging it into a PC, experiment with a different PC. Plug it in and see if windows 'see's it. (even without opening itunes, the windows 'photo import wizard' should pop up or you should see the iPad in window's exploreer) If that popup happens, then your cable is good and the USB port on your iPad is good, which narrows it down to an iTunes issue.
    If you can't see the ipad on another computer, your cable may be bad. Try a different cable. If you replicate the 'non seeing' with multiple computers and multiple cables then you may have a bad USB port on your iPad. If that's the case, return it because it should be covered under manufacturer's defects. However you should try all the troubleshooting first since the Apple rep or the store will have to replicate the issue in the store before they can consider exchanging.
    To enable wifi sync, you have to connect the iPad via the cable, then under the 'summary' tab in iTUnes, turn wifi syncing on. If you don't do that, then wifi sync won't work.

  • Itunes don't reconize my Ipad mini

    Hello,
    I've controlled all, i have installed the new version of itunes but it don't works...
    My PC reconize the Ipad but Itunes don't...
    What can I do?
    G.P.

    I got a iphone 4, and had the same problem. Do you by chance have megakey or megaupload installed on your pc? If so, uninnstall them, reboot, then connect your ipad and start itunes. I hope this works as good for you as it did for me. Good luck!

  • I am not able to set up my ipad2 - tried the regular help but nothing seems to working. itune simply wont detect the ipad

    i am not able to set up my ipad2 - tried the regular apple help - did all those routines - but nothing seems to working. itune simply wont detect the ipad

    http://support.apple.com/kb/TS1538

  • My itunes is not detecting my ipad air can any one help me plz

    ever since i updated my itunes its not rdetecting my ipad can any one help me with this problem plz

    Hello prachandkhanal,
    Thanks for using Apple Support Communities.
    If it does not appear under Devices in iTunes after you connect it to your PC try this article. 
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Have a nice day,
    Mario

  • Voice memos in iTunes don't sync to iPad

    I've tried several times to sync voice memos from my macbook to my iPad (originally recorded on my iPhone) but without obvious success. All the right boxes are ticked. I'm assuming they should appear as a playlist in the music app? If not, where do I find them?

    I have the same problem as Newfoster.
    Downloaded itunes 17th December 09'
    Got my Itouch 24th December.
    Since 5th january, its been working excellent, photos and music syncing fine.
    I decided to put some "free" applications on only.
    WoW Armory. WoW Authenificator.
    I downloaded them. went onto Devices > Applications, And there i can see the 2 applications i downloaded. yet, the only thing on that page that responds in the "sync" button in the bottom right hand corner of that page, everything else wont let me click or move.
    Capacity: 7gb
    Availible: 3.4gb
    Version: 3.1.2 (7D11)
    I hope i can find a solution fast, because im beginning to run in-patient with it. I've tried seeking advice from friends, but they have "jailbroken" ipods.
    Also tried on a friends computer, app page wouldnt respond either.
    Many regards. Fergal.
    <Edited by Host>

  • My Pc don't detect my ipad and iphone4. I can't pass the photos

    Help!

    Have they ever been recognised in itunes? What version of itunes are you using? Have you tried another usb port or cord? How about another computer?
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/

  • Kein Emailversand von iPad 3 via WLAN

    Wenn ich mit dem WLAN verbunden bin kann ich keine Email über die iCloudMail versenden, aber empfangen.
    Bei Verbindung über Mobilfunkanbieter gibt es keine Probleme.
    Hardware: Speedport W724V Typ A
    Server von Apple sind / waren bereits hinterlegt.
    Bin für jede Hilfe dankbar!

    I've made more tests and it seems the sync and even detection of the iPad fails if I ripp a CD to MP3 prior to sync the songs.
    Steps to reproduce:
    1. insert a CD ROM and activate "MP3 import"
    2. the MP3 songs are ripped to a folder and added to the media list
    3. Drag and drop the songs to the iPad music folder
    iTunes get stuck and sync forever. Only killing iTunes und enable/disable of flight mode on iPad let it work again.
    It is iTunes 10.6 on Windows and iPad3 via WLAN sync. Workaround is to connect the USB cable and sync.
    Sometimes after restarting iTunes under above condition the iPad is not detected via WLAN at all. It is not listed as target device in iTunes and only cabling the iPad via USB solved the issue.

  • Connection between iPad2 and AV-Receiver via WLan

    I want to connect my iPad via WLan with my Onkyo AV-receiver to play music of my iPad. Do I need additional hardware or what have I to do?

    I don't think there is a one-cable solution either. You're going to need to feed the audio separately, and if the TV set doesn't allow you to select separate inputs for audio and video, then you won't be able to use the TV set's speakers at all. In that case, setting up a pair of computer speakers on either side of the TV is probably the best solution.

  • Itunes is not recognizing my ipad wirelessly

    All of a sudden iTunes is not recognizing my iPad through my wireless network. It does recognize my phone however. I've tried reinstalling iTunes, turning my iPad off and on and everything. Still nothing. This just started yesterday.

    Have you checked to make sure that the iPad is still set for WiFi sync in iTunes in the Summary Pane of iTunes? Sometime settings go wonky - it happened to me tonight.
    Connect the with the cable again to check the setting - if iTunes is not seeing the iPad via wifi you will have to use the cable. So connect again - check the settings - sync with the cable again - then select the WiFi option again and click on Apply. Let the changes apply and eject the iPad.
    Quit iTunes, restart your computer and then try again.

  • HT201210 on my iPad I get an image of the USB connection and an arrow pointing to the itunes icon for a few seconds then it switches off.  connected  to itunes via USB get a message that itunes has detected an ipad in recovery mode must restore when i do

    When I havent got my ipad connected to a power supply I get an image on my ipad of the usb cable with an arrow pointing to a itunes icon and no matter what you try and do iyt stays on that for a few seconds and then switches off the ipad, connecting it through usb into itunes on my PC (XP) this image says on the screen but I get a message on itunes saying itunes has detected an ipad in recovery mode and mneeds to be restored - when I fire off the restore through itunes after a few minutes it comes back and says it cannot restore and give an error message 1603.  I have also repeated the process through my wife's laptop (Vista) and get the same situation -it is an 32GB Ipad 3 purchased last November -  any ideas ?

    Try and turn off iPad/iPod and proceed to step 3 of Recovery Mode.
    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

Maybe you are looking for

  • Win 7 x64 & PSE?

    My faithful PC chewed up it's system board/processor.  The good news is that the HD seems untouched. My stored pictures are all there!!!  But my system is now Windows 7 X64, It seems clear that my PSE 3.0 is not going to function in a Win 7 environme

  • Sub-contracting purchase for by-products

    Hi I am doing Sub-Contracting PO for By- Products. I have maintianed in BOM , the by-product material code in "-ive" qty. Consider Material A - Main Product                Material B - By_Product               Material C - Raw Material When i do GRN,

  • Insert a blank line between records

    Hi, I am creating a sqlplus report and want to insert a blank line or some seperator to seperate the records between the start and end points of the loop to make it more readable. ex : The output currently look like this. ColumnA       ColumnB 1     

  • Hotkey Command S not working.

    My hotkey Command S no longer works. Could I have (I may have) accidentally overrode it by assigning it to another task in another (unknown) application? How do I get it back? Driving me nuts.

  • Elements 11 Brush Problem

    Hello, I am using Elements 11 on a PC running Windows 7 Professional.  Not sure what setting I inadvertently changed, but am having a problem when I use any of the round brushes from the "Default" or "Basic Brushes" sets .  When I click the mouse but