ITunes double click problem (query bug)

With the recent iTunes update 7.7.1(11), I noticed that when switching between iTunes (esp. when it is in the compact mode) and other apps, a single mouse click in iTunes is often interpreted as a double click. This leads to distress when I try to pause the current track as the double click action pauses the track then plays it.
To relieve this symptom, I need to minimize iTunes and maximize it again.
Anyone else out there with the same problem?
(sorry about the double post - first time @ the discussion pages)

i'm having this same problem, but the "auto" double-clicking happens in mac mail. i've checked mouse settings, i've rebooted, but nothing seems to help. whenever i switch into mail, my first click is always treated as a double-click. (very annoying, since it usually opens a message into an unwanted window.)
another mouse-related problem: sometimes my mac seems to be swallowing mouse clicks. (not in mail, though! maybe that's where all those lost clicks are going! <g>) my mac acts as if i am clicking on a dead zone (that is, a region that doesn't accept clicks). i can click on the region all day (e.g. a tab in safari) and nothing will happen. if i, however, click on something else (even, say, just the background of a web page), the go back to the area that was dead moments before (that tab, e.g.), suddenly it accepts the click.
any ideas?

Similar Messages

Double click problem in iTunes (query bug)

With the recent iTunes update 7.7.1(11), I noticed that when switching between iTunes (esp. when it is in the compact mode) and other apps, a single mouse click in iTunes is often interpreted as a double click. This leads to distress when I try to pause the current track as the double click action pauses the track then plays it.
To relieve this symptom, I need to minimize iTunes and maximize it again.
Anyone else out there with the same problem?

Hi,
transaction VA23 is for Quotations..
so in your select query write...
select vbeln
         erdat ........
          from vbak into corresponding fields of table <table name>
          *where vbtyp eq 'B'*. (Document type for Quotation)
Then it works.
Regards,
Sathish Reddy.

Double click problem in Premiere CS4

I can’t open my projects by double clicking on the projectname.proj
Project name icon is missing and when I try to right click/open in and select Premiere it says:
This is not windows valid Win32 program ( OS = Windows XP SP3)
When I go to START / Premiere Pro SC4 and load Premiere first and then navigate to projectname.proj (The icon is still missing) the projects loads up nicely and everything is working just fine.
I installed Premiere Pro CS on another PC where OS = Vista Business Edition using where same installation disc (I don’t know if this is legal but I had to try it) and there was not any problems at all.
I just can’t use this PC because it was my wife’s and it took all the space on her hard disc so I must to remove it.
sikter

Hello again!
I was ignoring this particular problem for a while but I did have some project loading issue from time to time.
So I went to control panel\folder alternatives again and selected "advanced settings".
There is an option to add new file type and make its path to the right "exe-file"
I have tried it before but this time I noticed that I wrote command "OPEN" in the field where I was supposed to type what kind action system will perform.
I tried "LOAD" and problem was still there. Then I realized how stupid I was:
My OS is not in English but in Norwegian. I typed "Åpen" and almost immediately all my icons turned to pink.
It was an extraordinary experience. Like in those chick movies
I never experienced any bug-related problems after that.
Hope this thread will help someone in the future.
All credits to Mr. Hunt
Best regards
sikter

AVL Double click Problem

Dear Experts,
I hv created an ALV report. when in double click on the record it take me to the required tcode (FB03).
But the problem is ,it always display last record of internal table if I clicked on first record,
Can any one suggest me something.
Regards,
Maverick

Thanks for ur reply.
I m using normal ALV. go through the following
form display_all_item_alv.
w_repid = sy-repid.
perform update_catalog.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = w_repid
   I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
*   I_CALLBACK_TOP_OF_PAGE            = 'TOP-OF-PAGE'
   IT_FIELDCAT                       = I_FCAT[]
   I_SAVE                             = 'X'
* IMPORTING
*   E_EXIT_CAUSED_BY_CALLER           =
*   ES_EXIT_CAUSED_BY_USER            =
TABLES
    T_OUTTAB                          = i_faglflexa_all
* EXCEPTIONS
*   PROGRAM_ERROR                     = 1
*   OTHERS                            = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.
*       FORM USER_COMMAND                                          *
*       --> R_UCOMM                                                *
*       --> RS_SELFIELD                                            *
form user_command using r_ucomm like sy-ucomm
                  rs_selfield TYPE slis_selfield.
w_gjahr = p_gjahr.
case r_ucomm.
     when '&IC1'.
        if r_open = 'X'.
          set parameter id 'BLN' field i_faglflexa_open-belnr.
        elseif r_clear = 'X'.
          set parameter id 'BLN' field i_faglflexa_clear-belnr.
        else.
          set parameter id 'BLN' field i_faglflexa_clear-belnr.
        endif.
      set parameter id 'BUK' field p_bukrs.
      set parameter id 'GJR' field w_gjahr.   "i_faglflexa_clear-gjahr.
      call transaction 'FB03' and skip first screen.
endcase.
endform.                    "user_command
Regards,
Maverick

Open Dialog double-clicking problems.

Here's a head-scratcher...
Recently in almost any Open Dialog box, when I double-click a folder on my server it will turn the arrow down and list the contents rather than opening that directory. Then when I save, it doesn't save it in the intended directory. Strange. I can't seem to figure out why.
The real strange part is that it happens in all my non-Apple applications only (e.g. illustrator, bbedit, Word), but Apple apps behave normally (e.g. Preview, Safari). Also, it ONLY occurs when I try to access folders on my server (Linux using Clark Connect) where my HD and external HD behave perfectly fine.
The other strange thing is I've tried this on another mac on the network and my PowerBook, but, surprise, it all works fine on those machines -- so it's just my G5. I tried trashing finder pref but no joy.
I can work around this by doing a lot of command-downarrow's in those dialog boxes, but I'd prefer to have it the way it was
Can anyone shed some light on this strange phenomenon? I can't find any threads anywhere that has this same problem. Thanks in advance.
G5 Tower Dual 2.5 Mac OS X (10.4.8)

Huh.
I've recently started having the same mysterious annoyance. Except the afflicted folders are on an external (firewire) drive, not a server...
Similarly, it's not occurring with Apple apps, as far as I know.
What's perhaps oddest of all, some folders on this volume are functioning normally, while others aren't.
I had been using Default Folder X, but this happens even when that's disabled, erased, freshly installed, etc. In certain apps, clicking on the current folder name in the open/save dialog initiates a crash (seems related to the interface itself).
I've repaired the disk, permissions, trashed all related preferences, etc. Everything checked out okay.
One final clue, perhaps related or not: I've been finding duplicated folder names nested in the 'Volumes' path subordinate to my primary disk. These are probably supposed to be hidden. But I haven't deleted or otherwise tinkered with them. They do not contain the identical items of the 'real' volume (much fewer folders, documents, etc.) but there they are, acting somewhat like imposters.
Like ookla says, a head-scratcher. I'm gonna upgrade to latest flava of OS and see if it helps; I'll let y'all know.
Good luck!
G4 Powerbook, G4 Tower Mac OS X (10.4.3)

Flash wmode=transparent double-click problem in IE

Hi,
I've discovered a strange problem with flash content using
wmode=transparent in IE - when someone double click the flash the
whole movie TURNS BLUE (!)
For example you can see this behaviour in action at
http://www.stella-artois.cz
- I implemented there IE active content fix (as described at
http://www.macromedia.com/go/7c29e252)
and ended up with this.
Well, as far as I can say there are people who double-click
on everything, so I'd really like to fix it.
Would anybody know how to do that?
Thanks a lot!

Sometimes it is just a trial and error. The main thing is since I'm not working with your files, I have to mimic your scenario as best I can. Make sure you give it exact positions when stacking actual videos or swf files to force them to overlap. I tested this first with just a swf file and now the example is swapped to stack to youtube embeds as examples.
It really shouldn't matter if it is a dropdown or what type of activity, as long as you have the stacking correct. You can also, generally set the one in back to opaque. I updated the code snippet because this one seemed to read better.
<html>
<head>
</head>
<body>
          <div id="background" style="position:absolute; left:0px; top:0px; z-index:-50">
          <iframe title="YouTube video player" frameborder="0" allowfullscreen="true" allowtransparency="true" width="650px" height="750px" src="http://www.youtube.com/embed/FOHJUrcVdJk?amp;wmode=transparent"></iframe>
          </div>
          <div id="myDiv" style="position:absolute; left:0px; top:0px; z-index:1000;">
          <iframe title="YouTube video player" frameborder="0" allowfullscreen="true" allowtransparency="true" width="500px" height="500px" src="http://www.youtube.com/embed/FOHJUrcVdJk?amp;wmode=transparent"></iframe>
</div>
<body>
</html>

Erratic mouse double-click problem (OS or Motherboard?)

I have a MacBook
MacBook4,1 / Intel Core 2 Duo 2,4 GHz (2Gb RAM)
I have two mice: Microsoft Wireless Mobile Mouse 3000 v2.0 (bough lately) and a Logitech M-BT-96a (simple 2 buttons with wheel)
I don't know if it is after upgrading to Snow Leopard (10.6.8) but one or the other are causing unwanted double-clicks!
I downloaded Lion but didn't install yet.
The trackpad act also funny especialy with touching to create clicks and double-clicks. I tough first it was because I press to heavely on each side of the trackpad… I changed my position: Same thing.
I have two USB hubs daisy chained. Even when I'm unplugging them… It does the same thing.
Thanks for your help

As best as I can recall, my original eMac mouse lasted maybe a year before both the mouse tracking and the button contact switch began to act erratically. The button contact can wear out. If you still have your original eMac mouse, you've done an amazing job of treating it gently (maybe you can give me lessons --- I end up replacing mice every 2 years or so!).
Can you try another USB mouse? Any third-party three button USB mouse will work as a basic three-button mouse without needing any additional software to be loaded; e.g., the Logitech Prefernce Pane offers more control over features of their mice, but you can do without it and just plug the mouse in.

Double-click problem on JList items

I wrote codes in double-click function on JList selected items and used the codes below (the same as those in the Java1.3 document).But I find sometimes the code can't catch the mouseClicked event and do nothing at all. Is there any other trick to implement the function properly? Thanks a lot!
final JList list = new JList(dataModel);
MouseListener mouseListener = new MouseAdapter() {
public void mouseClicked(MouseEvent e) {
if (e.getClickCount() == 2) {
int index = list.locationToIndex(e.getPoint());
System.out.println("Double clicked on Item " + index);
list.addMouseListener(mouseListener);

Hi Amjad,
instead of adding the doubleclick-event on every list item, you can just check which item was clicked in the dobuleclick-event of the list-box.
In the mentioned example, you can replace the ondblclick listener with the following:
oSimpleListBox.ondblclick = function(e){
alert(e.target.innerHTML)
This will output the text of the clicked list item
Greets,
ben

Double click problem

Hi all,
I've got a problem using JSF (myfaces) and command links. When link is clicked several times quickly, the same page is shown and no response is genered. I think that exception is thrown during subsequent requests to same link, is there a way to ignore all clicks on same link after user clicks at the first time?
This has been probably already discussed, are there easy solutions?
Thanks,
Andrey.

Since the last post, I've run hardware test and came up with no problems. I also used another mouse with no difference in response. It does work with control click though. Re-installing Leopard.
Gary

Itunes won't respond to double clicking on a song once another song is play

hi. i open itunes, double click on a track and then if i want to play another track i double click on it but itunes won't respond and just keeps playing the original track. if i click on the track, it will highlight but won't play when double clicked. it will however play if i highlight with a single click and hit return. why is this happening. it never used to happen and doesn't on my other computer.

QuickTime X wouldn't have given the error message if it could have opened the file.
There are many file formats and codecs it can't view.

Problem w/"combo boxes" cause the user to double click for the dropdown menu, but not for everyone.

I have created a form with Adobe Acrobad Pro 9.
There are a few "drop-down" boxes for people to choose options from. I created them with the "Combo box" option. They work perfectly fine on my laptop (Lenovo T500 windows 7, with all updates up to date.) I sent the file to another exact same computer and that's when the problem came up. When you click on the drop-down, the list will quickly appear and then disappear. Then if you click it again it will stay open so you can choose your option. However this only happens on "some" computers but not everyone's. I emailed the exact same form out to other people in my office and they do not have any problems with the form. There is no need to double click the drop down, it will just open up properly for them.
Has anyone come across this? And if so, is there maybe a setting on these specific laptops that is preventing the "combo box" to not work properly? I need to use this specific laptop as a "Kiosk" like a "check out" station for users to fill out the form to check out equipment. I will be running in Reader so people can not make changes to the form. (both the Acrobat Pro 9 version and the (most up to date) Reader version of the PDF form does the same "double-click" problem) I need a date drop down and an equipment type drop down.
Any suggestions would be greatly appreciated !
Thanks !

I've got this kind of problem with a form of mine (designed with LCD) :
- combo boxes with font-color changing event handlers on :enter
- on Acrobat 9 Pro : no problem
- on Reader 8.3 :
- first click seems to execute the event handler but stops the combo's opening
- second click does open the combo
Do you have event handlers on combo:enter ?
Could the difference between comps where it works and comps where it doesn't be Acrobat's version ?

Yosemite problems with double click dock commands and keyboard shorcuts

I have a mid 2012 macbook pro 17", i recently installed Yosemite although it fixed my internet problem (connection dropping randomly) now i am having issues with opening apps and files. Double clicking on a file launches the corresponding app but does't open the file i just get and message stating the app is not open anymore if click the file again. Finder keyboard shorcuts such as command+Q don't work. Can't access some menu items such as "about this mac". Dragging a file into the dock icon launches the app but doesn't open the file either.
I have no idea what's causing this. anybody got a clue or having similar problems
Thank you

Same problem here. (Yosemite 10.0.1)
the mouse is a 'team scorpion g-reaver' http://teamscorpion.net/ts2014/g-reaver_1.html
It's work perfectly on the pc of my brother (he uses windows).
It's a clean install...
And has a funny fact... The Left Button was with this problem... So what I did? I changed the primary mouse button to the Right... Worked ok for almost 1~2 days... After that, the two buttons showed the double-click problem....
But, I repeat, the mouse works perfectly in the windows of my brother '-'

Double-click speed

I've noticed that in Java programs double-click speed is faster than in other applications ?
In any non-Java programs on my computer the double-click works fine.
But in Java programs i have to click mouse very fast to get the effect of double-click.
Are not they supposed to be the same ?
Is there any way to adjust the double-click speed in Java VM ?
Any help is greatly appreciated.
P.S I use Fedora Core 3 and Java 1.5.0

I've been playing around with Ubuntu linux lately and have noticed this double click problem. After reading through the Java source code I think I found a solution:
Under the linux JVM getDesktopProperty("awt.multiClickInterval") maps roughly into a C function call to XGetDefault(,,"multiClickTime"). The problem is that unless this value is explicitly defined it defaults to 200ms. The solution, then, is to define it. Under Ubuntu (Debian) I created a .Xresources file in my home directory with the line:
*multiClickTime: 400You might need to name the file .Xdefaults in other flavors of Linux.
In my opinion, Ubuntu should have done this for me when I used their graphical tool to change the double click speed. I think I'll bug them about it.

Double clicking on icons doesn't open up applications anymore

My iMac recently went thru a electrical surge in my house that ultimately caused an electircal fire in the wall of my home. Anyway, I'm no longer to able to just simply double click on a desktop icon which, in turn, wold open up the appropriate application, and I'm not sure what to do to fix that problem. It's very unconvient to right mouse click then selct open and choose my app.
Oh, my iMac has gotten slow too.
Help!

butterkups,
The electrical surge probably caused a hard shutdown which resulted in corrupted caches.
For the double-click problem, go to System Preferences...>Universal Access>Mouse>Mouse Options>... and change the "Double-Click" speed.
For the slow mac try Mac OS X: Starting up in Safe Mode.

Beginner - mouse over IE line - and click problem

My test swf - -
http://www.jennyweir.com/testSite/
How would I remove that white mouseover white line near the
edges of the page (as seen on IE7)
I made the swf full screen to try to get it to dissapear -
but full screen is apparently only nearly full screen and it is
still there
I would like to learn how to make an swf which can live
seamlessly in a matching html page so would appreciate knowing what
to do. There is a setting I chose which I thought would fix it
(show border) but it has not worked
Also - click problem:
in Flash, I made a fill layer into a button (100% size also
and under the visible elements ) so that I could attach a goto url
action (up)
on this swf you have to click twice to go to the url
I dont follow how this has come to be
appreciate any pointers
gav

Hi Gavlong
Did you try adding the background color parameter in the HTML
of your page? This is different than the background in the Flash
file. I looked at the source for your page and I didn't see it.
Regarding your double-click problem it may be due to an
Internet Explorer update from earlier in the year. I've read a few
bits about how for some interactive web apps (Flash is included in
the list of affected programs) the user needs to 'activate' the
control by pressing SPACEBAR or ENTER. That would explain the need
for the second click. Apparently there's a way to enable the
control from your web page by using and external .js file but I
haven't implemented it. Here are a couple of related
links...hopefully they are of some help:
http://msdn.microsoft.com/library/default.asp?url=/workshop/author/dhtml/overview/activati ng_activex.asp
http://msdn.microsoft.com/ieupdate/
http://www.adobe.com/devnet/activecontent/articles/devletter.html
-WD

ITunes double click problem (query bug)

Similar Messages

Maybe you are looking for