ITunes download conflict with video controller

I'm using a Toshiba laptop with Win XP Pro and IE8. Whenever I try to install iTunes, the video controller doesn't work properly. The screen resolution is lowered to a max of 1024 x 768 pixels instead of the usual 1280 x 800. I have uninstalled iTunes and QuickTime before downloading. I don't notice the changes until I reboot. The last (third) time I tried to do this I even turned off my antivirus program (Kaspersky), but it still didn't make any difference. The only way I can make my computer work properly again is to do a System Restore since I can't seem to find the driver for this device on the Toshiba download page. Any idea how I can resolve this issue?

I have not encountered, nor have I read of similar.
In my case, I have never tried to run both iTunes and PrE at the same time. Because video-editing is such an intensive process, I seldom have anything but my Adobe programs open at the same time. If I am not doing audio editing, I just hook up my iPod for music, and keep the headphones in place.
I'll give it a try and see if I get similar. Now, I do have modules, like iTunes Helper disconnected, and on one machine, Bonjour Services too (need that for Extensis Suitcase font manager to run). I also have QT Pro 7.5.5 and an earlier version of iTunes installed. With some recent issues with Adobe a newer versions of QT, I am loathe to allow updates, until I read reports that newer versions of QT have been fixed, with regards to Adobe programs.
After you observed the conflict, have you tried running just PrE by itself? Does it still see QT as not being installed? Same for iTunes alone. Does it still see QT as not being installed?
Have you tried to Add/Remove Programs from Control Panel, focusing on QT?
If you download and go to install the latest version of QT (though it might be the same version, as what you have/had), what happens?
Interesting development - please let us know the answers to the above questions and good luck,
Hunt

Similar Messages

  • ITunes 10.1 with video Airplay is out

    Will we need an AppleTv 2 software update...
    Here goes trying...

    Notes:
    About iTunes
    iTunes makes it easy to enjoy your favorite music, movies, TV shows and more on your Mac, iPhone, iPad, or iPod.
    iTunes includes the iTunes Store, a place you can download everything you need to be entertained, day or night.
    And, introducing Ping – an effortless way to follow your favorite artists and friends – and discover the music they're talking about, listening to, and downloading.
    What's new in iTunes 10.1
    • Use AirPlay to instantly and wirelessly stream videos from iTunes to the all-new Apple TV.
    • Sync with your iPhone, iPad, or iPod touch with iOS 4.2.
    • Provides a number of important stability and performance improvements.
    iTunes 10.1 requirements
    Hardware:
    • Mac computer with an Intel, PowerPC G5 or G4 processor
    • 1.0GHz PowerPC G4 or faster processor is required to play Standard Definition video from the iTunes Store
    • 2.0GHz Intel Core 2 Duo or faster processor is required to play HD video, an iTunes LP, or iTunes Extras from the iTunes Store
    • 512MB of RAM; 1GB is required to play HD video, an iTunes LP, or iTunes Extras
    • Screen resolution of 1024x768 or greater; 1280x800 or greater is required to play an iTunes LP or iTunes Extras
    • Playing videos also requires at least 16MB of video RAM
    • Broadband Internet connection to use the iTunes Store
    • Apple combo drive or SuperDrive to create audio, MP3, or back-up CDs; some non-Apple CD-RW recorders may also work
    • Apple SuperDrive to back up your library to DVDs; some non-Apple DVD-RW drives may also work
    Software:
    • Mac OS X version 10.5 or later
    • QuickTime 7.6 or later; Support for HE-AAC requires QuickTime 7.6.4 or later
    • Safari 4.0.3 or later
    • 200MB of available disk space
    • HD TV episodes can only be rented in the United States
    • Ping is available in Australia, Austria, Belgium, Canada, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Japan, Luxembourg, Mexico, New Zealand, Norway, Spain, Sweden, Switzerland, Netherlands, United Kingdom, and United States
    Installing iTunes 10.1
    Double-click the iTunes 10.1 installer and follow the on-screen instructions.
    For more information
    Using iTunes: Open iTunes and choose Help > iTunes Help. Type a question in the search field, or click "What is iTunes?" or a help topic.
    Latest product news: See the iTunes website at www.itunes.com. For the latest information about iPod, see www.apple.com/ipod. For the latest information about iPhone, see www.apple.com/iphone. For the latest information about iPad, see www.apple.com/ipad. For the latest information about Apple TV, see www.apple.com/appletv.
    iTunes Store billing questions: See www.apple.com/support/itunes/store.
    Using your iPod with iTunes: Open iTunes and choose Help > iTunes Help or iPod Help, or see the documentation that came with your iPod.
    Using your iPhone with iTunes: Open iTunes and choose Help > iTunes Help or iPhone Help, or see the documentation that came with your iPhone.
    Using your iPad with iTunes: Open iTunes and choose Help > iTunes Help or iPad Help, or see the documentation that came with your iPad.
    Using your Apple TV with iTunes: Open iTunes and choose Help > iTunes Help or Apple TV Help, see the documentation that came with your Apple TV, or see www.apple.com/support/appletv.
    Additional help with iTunes, iPod, iPhone, iPad, or Apple TV: Open iTunes and choose Help > iTunes Help or Apple Service and Support.

  • Using itunes downloaded song in Video

    I have Roxio Easy Media Creator 7 that I make video's with. Can I use the songs I download from itunes in these video's? if so, how can I add them since the songs are protected? TIA

    Thank you Joseph. Now can you tell me if I am up a creak without a paddle because I didn't save songs I downloaded because I had to re-install itunes? I'm new at this. I was taught when I remove a program you have to get rid of all parts of that program before in-stalling it. Thanks

  • Photoshop Elements 9 Downloader crash with video clips on memory card

    I have a Canon SX30IS. When I use PSE9 to download from memory card, if there are any videos present on the card, the Photo Downloader crashes.
    I believe that it is something to do with Apple Quicktime. When I uninstall Quicktime , PSE downloader does not crash while importing media form this camera,  but cannot play video clips. On reinstalling Quicktime , the PSE downloader crashes while searching the memory card for media.
    I have not upgraded PSE twice now because of this crash. What makes it worse is that Apple Quicktime is a very poor media player, managing about 2FPS on the video clips from this camera when both the Canon and the VLC video codecs can manage 30FPS.
    I would much prefer if I could choose to use a video renderer, like using any available Windows codecs rather than insisting on using annoying Apple software.
    Mike

    Please let  me know the mode in which camera/card reader is connected to the system (USB/PTP/MTP). This can be determined from camera.
    Please try to follow:
    1. Navigate to: C:\Program Files (x86)\Adobe\Elements 9 Organizer\PhotoDownloader.exe.
    2. Right click on 'PhotoDownloader.exe' and select 'Properties'.
    3. Naviage to 'compatability' tab and click on 'Run this program in comptability mode for' and select 'win xp service pack 3'.
    4. In the same dialog, click on 'Run this program as an admin' under 'privelage level'.
    5. Now run the: C:\Program Files (x86)\Adobe\Elements 9 Organizer\PhotoshopElementsOrganizer.exe as an administrator.
    Please let me know if you face any issues in following the steps.
    ~Surendra

  • ITunes Download problems with old email address

    iTunes will not download purchased or imported music currently on my list in iTunes that I imported  or purchased when I had a different email address (that no longer exists).  I can not add it as a verifying email won't be accepted.  This occurred when I purchased iPhone 4 with ios5 and had to load iTunes.  How do I correct?

    Hello Chief Weasel,
    The article linked below details how to go about changing the primary, alternate and notification e-mail addresses used with your wife's Apple ID.
    Primary email address
    Every Apple ID account has one primary email address, and that address is your Apple ID. When you create an Apple ID, you enter the primary address to use as your Apple ID.
    Your primary address is also the contact email address for your account. Check it regularly, because it receives email that you need to manage your account. For example, before you can use a new or changed Apple ID, you need to verify it as directed in a verification email that Apple sends to that address. Didn't receive the email?
    Manage your Apple ID primary, rescue, alternate, and notification email addresses
    http://support.apple.com/en-us/HT201356
    Cheers,
    Allen

  • Sound conflict with video

    my 694D Pro AIR has an internal audio.  I installed an additional SB Live sound card but after that the motherboard doesn't recognize my video card anymore.
    I put it in different PCI slot, disable my sound card from the bios but still Beep-beep-beep
    Anybody has this type of problem and know how to fix it please help.  THANKS!!!

    If the bios has this option then enable "assign IRQ to VGA"
    Make sure all the resources are set to auto as well.
    Did you try to see if it works with another VGA card and the SB or update the bios in case it will resolve the conflict ?

  • Downloading Album with Video but No Video Support

    I want to purchase a new album that includes a video and digital booklet. The problem is that my computer doesn't support any of the new videos because I can't upgrade to Quicktime 7 and iTunes 7. Will I be able to download the album nevertheless? I also use another computer that has iTunes 7, just less often, so I'll be able to transfer the video.

    Download VLC Player for Mac, and also Perian for Mac as well. http://www.perian.org
    http://www.videolan.org

  • Sound conflicts with video card

    I have the 845GLMS/GVMS series MS-6754 Motherboard and I have having some major conflicts between my GeForce FX 5200 PCI 256 MB video card and any sound that I run off the card -whether it be the AC97 sound off the board or my installed Create Audigy LS PCI card or my Create Soundblaster USB device.  What happens is that if I run a game like Doom 3 - with any audio enabled, the FPS slows down to 5-8 BUT if I turn all sound off, it goes up to 30-40 FPS and this is also true with other games.  I have all the latest drivers and the BIOS is as up to date as Live Update will let it.  What should I do???  HELP!!!!

    change the sound card to another pci slot..
    BTW which slot is the vid card in, it should be in the first available from the top..

  • Itunes and Conflicts with AIM

    *Notes: I have itunes 7.0 and an old version of AIM (because I absolutely hate the new, ad covered version - Triton, or whatever it's called)
    I was listening to itunes with AIM open and running, and everything was fine. The moment someone IMed me, my song went to double time, twice as fast as normal and very scratchy. I tested a few different songs, and they all had this problem. I read this article: http://docs.info.apple.com/article.html?artnum=93610h and assumed maybe the issue has to do with "direct sound" output (last paragraph on that page). When I closed AIM, itunes went back to normal. (this is the first time I've used the two programs at the same time since upgrading to the new version of itunes.
    I'd like to know if there's anything I can do. It seems silly to me that since I upgraded itunes I apparently can never use it at the same time as aim. This is the 21st century, after all! Do you guys have any suggestions that don't involve upgrading to a newer, more annoying, version of aim? Thanks!

    I think I figured it out...get an app on any device linked to iCloud and it appears on all of them. It just works!

  • ITunes locking up with Video Files

    I have a 30gig iPod video. I have been buying some rather large Videos, I get them into iTunes no problem, but when I try to click and drag them over to my iPod in the source pane my PC locks up and I need to reboot. I also tried doing an automatic update to the ipod and the pod does not recieve the files. What's up?

    Does your computer just hand there or ur itunes freezes? Since you say you have been buying large videos, this may cause your computer to hang for a while. Try it again and be patient. Maybe start it, have a snack or watch some tv or something and then check if it sends.

  • Yosemite Download conflict with Chrome and all email attachments

    Since downloading Yosemite to my 2009 iMac, when pressing insert attachment using Google, Outlook or Yahoo mail, the dropdown menu of files won't close and blocks the email send button.  I have to shut down Google chrome and then reopen it and log back into my email draft. Anyone else have this problem or know how to fix it?

    Ive noticed this too and find it to be inconsistent even. I have not figured out the pattern, but sometimes mail automatically downloads all the attachments. Most of the time though it only pulls the first one.

  • Download conflicts with Matlab

    Cannot install ANY Adobe products.  Downloader name ends in .mdlp and this is exactly the ending used for some Matlab scripts.  Ends up running Matlab and not installing.  Acrobat, Flash Player, etc.  Any way around or goodbye adobe?

    Unfortunately, I don't know why those files are getting renamed.  It's some non-Adobe software causing that problem.  If someone figures it out, I'd love to know.
    For the Lightroom update issue, you should post a question over in the Lightroom forums.  They'll be better equipped to help you.
    Photoshop Lightroom

  • Radeon only boots with video sometimes

    Alright, I'm having a strange problem. About half the time when I start my system, the radeon driver loads properly, kms kicks in, the terminal resolution changes and everything works peachy.
    The other half of the time, right when the driver is loaded and the resolution is supposed to change, my monitor just starts as if it has a signal but the screen stays dark. The system boots up completely fine otherwise and I can ssh in to use it. Any ideas why I would have video one boot but not the next? I can't find any difference between them.
    This is a fully up to date freshly installed system. I've included the journal logs for a successful boot and a no video boot below:
    Good boot:
    Allowing runtime journal files to grow to 177.8M.
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 3.6.3-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Oct 22 10:23:56 CEST 2012
    Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=842ee169-3e01-4f26-b5bd-900ad1142339 ro quiet
    e820: BIOS-provided physical RAM map:
    BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    BIOS-e820: [mem 0x0000000000100000-0x0000000096e9ffff] usable
    BIOS-e820: [mem 0x0000000096ea0000-0x000000009733afff] reserved
    BIOS-e820: [mem 0x000000009733b000-0x00000000973bafff] ACPI NVS
    BIOS-e820: [mem 0x00000000973bb000-0x000000009741afff] ACPI data
    BIOS-e820: [mem 0x000000009741b000-0x0000000097dfffff] usable
    BIOS-e820: [mem 0x0000000097e00000-0x0000000097ffffff] reserved
    BIOS-e820: [mem 0x00000000fec00000-0x00000000fecfffff] reserved
    BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
    BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
    BIOS-e820: [mem 0x0000000100000000-0x000000014effffff] usable
    NX (Execute Disable) protection: active
    DMI 2.6 present.
    DMI: AMD Brazos/Inagua, BIOS BZ_2.1.0.333_8 X64 03/02/2012
    e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    e820: remove [mem 0x000a0000-0x000fffff] usable
    No AGP bridge found
    e820: last_pfn = 0x14f000 max_arch_pfn = 0x400000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 000000000 mask F80000000 write-back
    1 base 080000000 mask FF0000000 write-back
    2 base 090000000 mask FF8000000 write-back
    3 base 0FFE00000 mask FFFE00000 write-protect
    4 base 0FFF79000 mask FFFFFF000 uncachable
    5 base 0FFF7A000 mask FFFFFE000 uncachable
    6 base 0FFF7C000 mask FFFFFC000 uncachable
    7 base 0FFF80000 mask FFFFE0000 uncachable
    TOM2: 000000014f000000 aka 5360M
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820: last_pfn = 0x97e00 max_arch_pfn = 0x400000000
    found SMP MP-table at [mem 0x000fbaa0-0x000fbaaf] mapped at [ffff8800000fbaa0]
    initial memory mapped: [mem 0x00000000-0x1fffffff]
    Base memory trampoline at [ffff880000097000] 97000 size 24576
    Using GB pages for direct mapping
    init_memory_mapping: [mem 0x00000000-0x97dfffff]
    [mem 0x00000000-0x7fffffff] page 1G
    [mem 0x80000000-0x97dfffff] page 2M
    kernel direct mapping tables up to 0x97dfffff @ [mem 0x1fbfe000-0x1fffffff]
    init_memory_mapping: [mem 0x100000000-0x14effffff]
    [mem 0x100000000-0x13fffffff] page 1G
    [mem 0x140000000-0x14effffff] page 2M
    kernel direct mapping tables up to 0x14effffff @ [mem 0x97dfe000-0x97dfffff]
    RAMDISK: [mem 0x3788e000-0x37c3efff]
    ACPI: RSDP 00000000000f00e0 00024 (v02 PTEC )
    ACPI: XSDT 000000009741a120 00074 (v01 PTEC OEMTABLE 00000002 PTEC 00000002)
    ACPI: FACP 000000009740d000 000F4 (v03 PTEC OEMTABLE 00000002 PTL 00000002)
    ACPI: DSDT 000000009740e000 0B911 (v01 PTEC OEMTABLE 00001000 PTEC 00000002)
    ACPI: FACS 00000000973a8000 00040
    ACPI: HPET 000000009740c000 00038 (v01 PTEC OEMTABLE 00000002 PTL 00000002)
    ACPI: APIC 000000009740b000 0005E (v02 PTEC OEMTABLE 00000002 PTL 00000002)
    ACPI: MCFG 000000009740a000 0003C (v01 PTEC OEMTABLE 00000002 PTL 00000002)
    ACPI: UEFI 0000000097409000 0003E (v01 PTEC OEMTABLE 00000002 PTL 00000002)
    ACPI: UEFI 0000000097408000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
    ACPI: SSDT 0000000097407000 0030C (v01 AMD POWERNOW 00000001 AMD 00000001)
    ACPI: SSDT 0000000097405000 0168E (v02 AMD ALIB 00000001 MSFT 04000000)
    ACPI: SSDT 0000000097404000 00F15 (v01 AMD SB800 00000001 INTL 20061109)
    ACPI: UEFI 0000000097403000 0012A (v01 PTEC OEMTABLE 00000002 PTL 00000002)
    ACPI: Local APIC address 0xfee00000
    No NUMA configuration found
    Faking a node at [mem 0x0000000000000000-0x000000014effffff]
    Initmem setup node 0 [mem 0x00000000-0x14effffff]
    NODE_DATA [mem 0x14effc000-0x14effffff]
    [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ac00000-ffff88014e5fffff] on node 0
    Zone ranges:
    DMA [mem 0x00010000-0x00ffffff]
    DMA32 [mem 0x01000000-0xffffffff]
    Normal [mem 0x100000000-0x14effffff]
    Movable zone start for each node
    Early memory node ranges
    node 0: [mem 0x00010000-0x0009cfff]
    node 0: [mem 0x00100000-0x96e9ffff]
    node 0: [mem 0x9741b000-0x97dfffff]
    node 0: [mem 0x100000000-0x14effffff]
    On node 0 totalpages: 944146
    DMA zone: 64 pages used for memmap
    DMA zone: 6 pages reserved
    DMA zone: 3911 pages, LIFO batch:0
    DMA32 zone: 16320 pages used for memmap
    DMA32 zone: 600261 pages, LIFO batch:31
    Normal zone: 5056 pages used for memmap
    Normal zone: 318528 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x808
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x43538210 base: 0xfed00000
    smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 40
    PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    PM: Registered nosave memory: 0000000096ea0000 - 000000009733b000
    PM: Registered nosave memory: 000000009733b000 - 00000000973bb000
    PM: Registered nosave memory: 00000000973bb000 - 000000009741b000
    PM: Registered nosave memory: 0000000097e00000 - 0000000098000000
    PM: Registered nosave memory: 0000000098000000 - 00000000fec00000
    PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
    PM: Registered nosave memory: 00000000fed00000 - 00000000fed80000
    PM: Registered nosave memory: 00000000fed80000 - 00000000fed81000
    PM: Registered nosave memory: 00000000fed81000 - 00000000ffe00000
    PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
    e820: [mem 0x98000000-0xfebfffff] available for PCI devices
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    PERCPU: Embedded 28 pages/cpu @ffff88014ec00000 s84608 r8192 d21888 u1048576
    pcpu-alloc: s84608 r8192 d21888 u1048576 alloc=1*2097152
    pcpu-alloc: [0] 0 1
    Built 1 zonelists in Node order, mobility grouping on. Total pages: 922700
    Policy zone: Normal
    Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=842ee169-3e01-4f26-b5bd-900ad1142339 ro quiet
    PID hash table entries: 4096 (order: 3, 32768 bytes)
    __ex_table already sorted, skipping sort
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Memory: 3635892k/5488640k available (4726k kernel code, 1712056k absent, 140692k reserved, 4144k data, 772k init)
    SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Preemptible hierarchical RCU implementation.
    RCU dyntick-idle grace-period acceleration is enabled.
    Dump stacks of tasks blocking RCU-preempt GP.
    RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
    NR_IRQS:4352 nr_irqs:512 16
    spurious 8259A interrupt: IRQ7.
    Console: colour dummy device 80x25
    console [tty0] enabled
    allocated 15204352 bytes of page_cgroup
    please try 'cgroup_disable=memory' option if you don't want memory cgroups
    hpet clockevent registered
    tsc: Fast TSC calibration using PIT
    tsc: Detected 997.913 MHz processor
    Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.98 BogoMIPS (lpj=3326376)
    pid_max: default: 32768 minimum: 301
    Security Framework initialized
    AppArmor: AppArmor disabled by boot time parameter
    Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Mount-cache hash table entries: 256
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    Initializing cgroup subsys net_cls
    Initializing cgroup subsys blkio
    tseg: 0097e00000
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 6 MCE banks
    Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
    tlb_flushall_shift is 0xffffffff
    ACPI: Core revision 20120711
    ftrace: allocating 18348 entries in 72 pages
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    smpboot: CPU0: AMD G-T40E Processor stepping 00
    Performance Events: AMD PMU driver.
    ... version: 0
    ... bit width: 48
    ... generic registers: 4
    ... value mask: 0000ffffffffffff
    ... max period: 00007fffffffffff
    ... fixed-purpose events: 0
    ... event mask: 000000000000000f
    NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    smpboot: Booting Node 0, Processors #1 OK
    Brought up 2 CPUs
    smpboot: Total of 2 processors activated (3993.97 BogoMIPS)
    devtmpfs: initialized
    PM: Registering ACPI NVS region [mem 0x9733b000-0x973bafff] (524288 bytes)
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xe0000000-0xe1ffffff] (base 0xe0000000)
    PCI: not using MMCONFIG
    PCI: Using configuration type 1 for base access
    PCI: Using configuration type 1 for extended access
    bio: create slab <bio-0> at 0
    ACPI: Added _OSI(Module Device)
    ACPI: Added _OSI(Processor Device)
    ACPI: Added _OSI(3.0 _SCP Extensions)
    ACPI: Added _OSI(Processor Aggregator Device)
    ACPI: EC: Look up EC in DSDT
    [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xe0000000-0xe1ffffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xe1ffffff] reserved in ACPI motherboard resources
    [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    ACPI: Power Resource [P0L0] (off)
    ACPI: Power Resource [P0L1] (off)
    ACPI: Power Resource [P0L2] (off)
    ACPI: Power Resource [P0L3] (off)
    ACPI: ACPI Dock Station Driver: 2 docks/bays found
    PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    pci_root PNP0A08:00: ignoring host bridge window [mem 0x000ce000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff])
    pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
    PCI host bridge to bus 0000:00
    pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
    pci_bus 0000:00: root bus resource [bus 00-ff]
    pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c1fff]
    pci_bus 0000:00: root bus resource [mem 0x000c2000-0x000c3fff]
    pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c5fff]
    pci_bus 0000:00: root bus resource [mem 0x000c6000-0x000c7fff]
    pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000c9fff]
    pci_bus 0000:00: root bus resource [mem 0x000ca000-0x000cbfff]
    pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cdfff]
    pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d1fff]
    pci_bus 0000:00: root bus resource [mem 0x000d2000-0x000d3fff]
    pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d5fff]
    pci_bus 0000:00: root bus resource [mem 0x000d6000-0x000d7fff]
    pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000d9fff]
    pci_bus 0000:00: root bus resource [mem 0x000da000-0x000dbfff]
    pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000ddfff]
    pci_bus 0000:00: root bus resource [mem 0x000de000-0x000dffff]
    pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e1fff]
    pci_bus 0000:00: root bus resource [mem 0x000e2000-0x000e3fff]
    pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e5fff]
    pci_bus 0000:00: root bus resource [mem 0x000e6000-0x000e7fff]
    pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000e9fff]
    pci_bus 0000:00: root bus resource [mem 0x000ea000-0x000ebfff]
    pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000edfff]
    pci_bus 0000:00: root bus resource [mem 0x000ee000-0x000effff]
    pci_bus 0000:00: root bus resource [mem 0xb0000000-0xdfffffff]
    pci_bus 0000:00: root bus resource [mem 0xe1000000-0xffffffff]
    pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
    pci 0000:00:01.0: [1002:9804] type 00 class 0x030000
    pci 0000:00:01.0: reg 10: [mem 0xb0000000-0xbfffffff pref]
    pci 0000:00:01.0: reg 14: [io 0x3000-0x30ff]
    pci 0000:00:01.0: reg 18: [mem 0xc1200000-0xc123ffff]
    pci 0000:00:01.0: supports D1 D2
    pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
    pci 0000:00:01.1: reg 10: [mem 0xc1244000-0xc1247fff]
    pci 0000:00:01.1: supports D1 D2
    pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
    pci 0000:00:11.0: reg 10: [io 0x3118-0x311f]
    pci 0000:00:11.0: reg 14: [io 0x3124-0x3127]
    pci 0000:00:11.0: reg 18: [io 0x3110-0x3117]
    pci 0000:00:11.0: reg 1c: [io 0x3120-0x3123]
    pci 0000:00:11.0: reg 20: [io 0x3100-0x310f]
    pci 0000:00:11.0: reg 24: [mem 0xc124c000-0xc124c3ff]
    pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
    pci 0000:00:12.0: reg 10: [mem 0xc124b000-0xc124bfff]
    pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
    pci 0000:00:12.2: reg 10: [mem 0xc124c600-0xc124c6ff]
    pci 0000:00:12.2: supports D1 D2
    pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
    pci 0000:00:13.0: reg 10: [mem 0xc124a000-0xc124afff]
    pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
    pci 0000:00:13.2: reg 10: [mem 0xc124c500-0xc124c5ff]
    pci 0000:00:13.2: supports D1 D2
    pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
    pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
    pci 0000:00:14.2: reg 10: [mem 0xc1240000-0xc1243fff 64bit]
    pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
    pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
    pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
    pci 0000:00:14.5: reg 10: [mem 0xc1249000-0xc1249fff]
    pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
    pci 0000:00:15.0: supports D1 D2
    pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
    pci 0000:00:15.1: supports D1 D2
    pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
    pci 0000:00:15.2: supports D1 D2
    pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
    pci 0000:00:16.0: reg 10: [mem 0xc1248000-0xc1248fff]
    pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
    pci 0000:00:16.2: reg 10: [mem 0xc124c400-0xc124c4ff]
    pci 0000:00:16.2: supports D1 D2
    pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
    pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
    pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
    pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
    pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
    pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
    pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
    pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
    pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
    pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff]
    pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
    pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c1fff] (subtractive decode)
    pci 0000:00:14.4: bridge window [mem 0x000c2000-0x000c3fff] (subtractive decode)
    pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c5fff] (subtractive decode)
    pci 0000:00:14.4: bridge window [mem 0x000c6000-0x000c7fff] (subtractive decode)
    pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000c9fff] (subtractive decode)
    pci 0000:00:14.4: bridge window [mem 0x000ca000-0x000cbfff] (subtractive decode)
    pci 0000:00:14.4: bridge window [mem 0x000cc000-0x000cdfff] (subtractive decode)
    pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d1fff] (subtractive decode)
    pci 0000:00:14.4: bridge window [mem 0x000d2000-0x000d3fff] (subtractive decode)
    pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d5fff] (subtractive decode)
    pci 0000:00:14.4: bridge window [mem 0x000d6000-0x000d7fff] (subtractive decode)
    pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000d9fff] (subtractive decode)
    pci 0000:00:14.4: bridge window [mem 0x000da000-0x000dbfff] (subtractive decode)
    pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000ddfff] (subtractive decode)
    pci 0000:00:14.4: bridge window [mem 0x000de000-0x000dffff] (subtractive decode)
    pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e1fff] (subtractive decode)
    pci 0000:00:14.4: bridge window [mem 0x000e2000-0x000e3fff] (subtractive decode)
    pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e5fff] (subtractive decode)
    pci 0000:00:14.4: bridge window [mem 0x000e6000-0x000e7fff] (subtractive decode)
    pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000e9fff] (subtractive decode)
    pci 0000:00:14.4: bridge window [mem 0x000ea000-0x000ebfff] (subtractive decode)
    pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000edfff] (subtractive decode)
    pci 0000:00:14.4: bridge window [mem 0x000ee000-0x000effff] (subtractive decode)
    pci 0000:00:14.4: bridge window [mem 0xb0000000-0xdfffffff] (subtractive decode)
    pci 0000:00:14.4: bridge window [mem 0xe1000000-0xffffffff] (subtractive decode)
    pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    pci_bus 0000:02: busn_res: [bus 02-03] is inserted under [bus 00-ff]
    pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
    pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff]
    pci 0000:02:00.0: reg 18: [mem 0xc0004000-0xc0004fff 64bit pref]
    pci 0000:02:00.0: reg 20: [mem 0xc0000000-0xc0003fff 64bit pref]
    pci 0000:02:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
    pci 0000:02:00.0: supports D1 D2
    pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:15.0: PCI bridge to [bus 02-03]
    pci 0000:00:15.0: bridge window [io 0x2000-0x2fff]
    pci 0000:00:15.0: bridge window [mem 0xc0a00000-0xc11fffff]
    pci 0000:00:15.0: bridge window [mem 0xc0000000-0xc07fffff 64bit pref]
    pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 00-ff]
    pci 0000:04:00.0: [104c:8241] type 00 class 0x0c0330
    pci 0000:04:00.0: reg 10: [mem 0xc0900000-0xc090ffff 64bit]
    pci 0000:04:00.0: reg 18: [mem 0xc0910000-0xc0911fff 64bit]
    pci 0000:04:00.0: supports D1 D2
    pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:15.1: PCI bridge to [bus 04]
    pci 0000:00:15.1: bridge window [mem 0xc0900000-0xc09fffff]
    pci_bus 0000:05: busn_res: [bus 05] is inserted under [bus 00-ff]
    pci 0000:05:00.0: [10ec:8176] type 00 class 0x028000
    pci 0000:05:00.0: reg 10: [io 0x1000-0x10ff]
    pci 0000:05:00.0: reg 18: [mem 0xc0800000-0xc0803fff 64bit]
    pci 0000:05:00.0: supports D1 D2
    pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:15.2: PCI bridge to [bus 05]
    pci 0000:00:15.2: bridge window [io 0x1000-0x1fff]
    pci 0000:00:15.2: bridge window [mem 0xc0800000-0xc08fffff]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB2._PRT]
    pci0000:00: Requesting ACPI _OSC control (0x1d)
    pci0000:00: ACPI _OSC control (0x1d) granted
    ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0
    ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0
    ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0
    ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0
    ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0
    ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0
    ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0
    ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0
    vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    vgaarb: bridge control possible 0000:00:01.0
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    e820: reserve RAM buffer [mem 0x96ea0000-0x97ffffff]
    e820: reserve RAM buffer [mem 0x97e00000-0x97ffffff]
    e820: reserve RAM buffer [mem 0x14f000000-0x14fffffff]
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    Switching to clocksource hpet
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:00: [bus 00-ff]
    pnp 00:00: [mem 0x000a0000-0x000bffff window]
    pnp 00:00: [mem 0x000c0000-0x000c1fff window]
    pnp 00:00: [mem 0x000c2000-0x000c3fff window]
    pnp 00:00: [mem 0x000c4000-0x000c5fff window]
    pnp 00:00: [mem 0x000c6000-0x000c7fff window]
    pnp 00:00: [mem 0x000c8000-0x000c9fff window]
    pnp 00:00: [mem 0x000ca000-0x000cbfff window]
    pnp 00:00: [mem 0x000cc000-0x000cdfff window]
    pnp 00:00: [mem 0x000ce000-0x000cffff window]
    pnp 00:00: [mem 0x000d0000-0x000d1fff window]
    pnp 00:00: [mem 0x000d2000-0x000d3fff window]
    pnp 00:00: [mem 0x000d4000-0x000d5fff window]
    pnp 00:00: [mem 0x000d6000-0x000d7fff window]
    pnp 00:00: [mem 0x000d8000-0x000d9fff window]
    pnp 00:00: [mem 0x000da000-0x000dbfff window]
    pnp 00:00: [mem 0x000dc000-0x000ddfff window]
    pnp 00:00: [mem 0x000de000-0x000dffff window]
    pnp 00:00: [mem 0x000e0000-0x000e1fff window]
    pnp 00:00: [mem 0x000e2000-0x000e3fff window]
    pnp 00:00: [mem 0x000e4000-0x000e5fff window]
    pnp 00:00: [mem 0x000e6000-0x000e7fff window]
    pnp 00:00: [mem 0x000e8000-0x000e9fff window]
    pnp 00:00: [mem 0x000ea000-0x000ebfff window]
    pnp 00:00: [mem 0x000ec000-0x000edfff window]
    pnp 00:00: [mem 0x000ee000-0x000effff window]
    pnp 00:00: [mem 0xb0000000-0xdfffffff window]
    pnp 00:00: [mem 0xe1000000-0xffffffff window]
    pnp 00:00: [io 0x0cf8-0x0cff]
    pnp 00:00: [io 0x0000-0x0cf7 window]
    pnp 00:00: [io 0x0d00-0xffff window]
    pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    pnp 00:01: [io 0x0f50-0x0f51]
    pnp 00:01: [mem 0xfec00000-0xfec00fff]
    pnp 00:01: [mem 0xfee00000-0xfee00fff]
    pnp 00:01: [mem 0xe0000000-0xe1ffffff]
    system 00:01: [io 0x0f50-0x0f51] has been reserved
    system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
    system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
    system 00:01: [mem 0xe0000000-0xe1ffffff] could not be reserved
    system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    pnp 00:02: [io 0x0000-0x001f]
    pnp 00:02: [io 0x0081-0x008f]
    pnp 00:02: [io 0x00c0-0x00de]
    pnp 00:02: [io 0x040b]
    pnp 00:02: [io 0x04d6]
    pnp 00:02: [dma 4]
    pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    pnp 00:03: [io 0x00f0-0x00fe]
    pnp 00:03: [irq 13]
    pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    pnp 00:04: [io 0x0070-0x0071]
    pnp 00:04: [irq 8]
    pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    pnp 00:05: [io 0x0061]
    pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    pnp 00:06: [io 0x0022-0x0023]
    pnp 00:06: [io 0x002e-0x002f]
    pnp 00:06: [io 0x0072-0x0073]
    pnp 00:06: [io 0x0080]
    pnp 00:06: [io 0x0092]
    pnp 00:06: [io 0x00b0-0x00b1]
    pnp 00:06: [io 0x00b2]
    pnp 00:06: [io 0x00b8]
    pnp 00:06: [io 0x00bc]
    pnp 00:06: [io 0x00f0]
    pnp 00:06: [io 0x04d0-0x04d1]
    pnp 00:06: [io 0x0530-0x0537]
    pnp 00:06: [io 0x0800-0x0827]
    pnp 00:06: [io 0x0830]
    pnp 00:06: [io 0x0840-0x0847]
    pnp 00:06: [io 0x0b00-0x0b1f]
    pnp 00:06: [io 0x0b20-0x0b3f]
    pnp 00:06: [io 0x0c00-0x0c01]
    pnp 00:06: [io 0x0c14]
    pnp 00:06: [io 0x0c50-0x0c52]
    pnp 00:06: [io 0x0cd0-0x0cd1]
    pnp 00:06: [io 0x0cd2-0x0cd3]
    pnp 00:06: [io 0x0cd4-0x0cd5]
    pnp 00:06: [io 0x0cd6-0x0cd7]
    pnp 00:06: [io 0x0cd8-0x0cdf]
    pnp 00:06: [io 0x0cf9]
    pnp 00:06: [io 0x8100-0x81ff window]
    pnp 00:06: [io 0x8200-0x82ff window]
    system 00:06: [io 0x04d0-0x04d1] has been reserved
    system 00:06: [io 0x0530-0x0537] has been reserved
    system 00:06: [io 0x0800-0x0827] has been reserved
    system 00:06: [io 0x0830] has been reserved
    system 00:06: [io 0x0840-0x0847] has been reserved
    system 00:06: [io 0x0b00-0x0b1f] has been reserved
    system 00:06: [io 0x0b20-0x0b3f] has been reserved
    system 00:06: [io 0x0c00-0x0c01] has been reserved
    system 00:06: [io 0x0c14] has been reserved
    system 00:06: [io 0x0c50-0x0c52] has been reserved
    system 00:06: [io 0x0cd0-0x0cd1] has been reserved
    system 00:06: [io 0x0cd2-0x0cd3] has been reserved
    system 00:06: [io 0x0cd4-0x0cd5] has been reserved
    system 00:06: [io 0x0cd6-0x0cd7] has been reserved
    system 00:06: [io 0x0cd8-0x0cdf] has been reserved
    system 00:06: [io 0x0cf9] could not be reserved
    system 00:06: [io 0x8100-0x81ff window] has been reserved
    system 00:06: [io 0x8200-0x82ff window] has been reserved
    system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    pnp 00:07: [mem 0x000e0000-0x000fffff]
    pnp 00:07: [mem 0xffe00000-0xffffffff]
    pnp 00:07: [mem 0x00000000-0xffffffffffffffff disabled]
    pnp 00:07: [mem 0xfec10000-0xfec1001f]
    pnp 00:07: [mem 0xfed00000-0xfed003ff]
    pnp 00:07: [mem 0xfed61000-0xfed613ff]
    pnp 00:07: [mem 0xfed80000-0xfed80fff]
    pnp 00:07: [Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xe0000000-0xe1ffffff]; adding more reservations
    system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
    system 00:07: [mem 0xffe00000-0xffffffff] has been reserved
    system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved
    system 00:07: [mem 0xfed00000-0xfed003ff] has been reserved
    system 00:07: [mem 0xfed61000-0xfed613ff] has been reserved
    system 00:07: [mem 0xfed80000-0xfed80fff] has been reserved
    system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
    pnp 00:08: [io 0x03f8-0x03ff]
    pnp 00:08: [irq 4]
    pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
    pnp: PnP ACPI: found 9 devices
    ACPI: ACPI bus type pnp unregistered
    pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
    pci 0000:00:14.4: PCI bridge to [bus 01]
    pci 0000:02:00.0: BAR 6: assigned [mem 0xc0010000-0xc001ffff pref]
    pci 0000:00:15.0: PCI bridge to [bus 02-03]
    pci 0000:00:15.0: bridge window [io 0x2000-0x2fff]
    pci 0000:00:15.0: bridge window [mem 0xc0a00000-0xc11fffff]
    pci 0000:00:15.0: bridge window [mem 0xc0000000-0xc07fffff 64bit pref]
    pci 0000:00:15.1: PCI bridge to [bus 04]
    pci 0000:00:15.1: bridge window [mem 0xc0900000-0xc09fffff]
    pci 0000:00:15.2: PCI bridge to [bus 05]
    pci 0000:00:15.2: bridge window [io 0x1000-0x1fff]
    pci 0000:00:15.2: bridge window [mem 0xc0800000-0xc08fffff]
    pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:00: resource 5 [mem 0x000c0000-0x000c1fff]
    pci_bus 0000:00: resource 6 [mem 0x000c2000-0x000c3fff]
    pci_bus 0000:00: resource 7 [mem 0x000c4000-0x000c5fff]
    pci_bus 0000:00: resource 8 [mem 0x000c6000-0x000c7fff]
    pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000c9fff]
    pci_bus 0000:00: resource 10 [mem 0x000ca000-0x000cbfff]
    pci_bus 0000:00: resource 11 [mem 0x000cc000-0x000cdfff]
    pci_bus 0000:00: resource 12 [mem 0x000d0000-0x000d1fff]
    pci_bus 0000:00: resource 13 [mem 0x000d2000-0x000d3fff]
    pci_bus 0000:00: resource 14 [mem 0x000d4000-0x000d5fff]
    pci_bus 0000:00: resource 15 [mem 0x000d6000-0x000d7fff]
    pci_bus 0000:00: resource 16 [mem 0x000d8000-0x000d9fff]
    pci_bus 0000:00: resource 17 [mem 0x000da000-0x000dbfff]
    pci_bus 0000:00: resource 18 [mem 0x000dc000-0x000ddfff]
    pci_bus 0000:00: resource 19 [mem 0x000de000-0x000dffff]
    pci_bus 0000:00: resource 20 [mem 0x000e0000-0x000e1fff]
    pci_bus 0000:00: resource 21 [mem 0x000e2000-0x000e3fff]
    pci_bus 0000:00: resource 22 [mem 0x000e4000-0x000e5fff]
    pci_bus 0000:00: resource 23 [mem 0x000e6000-0x000e7fff]
    pci_bus 0000:00: resource 24 [mem 0x000e8000-0x000e9fff]
    pci_bus 0000:00: resource 25 [mem 0x000ea000-0x000ebfff]
    pci_bus 0000:00: resource 26 [mem 0x000ec000-0x000edfff]
    pci_bus 0000:00: resource 27 [mem 0x000ee000-0x000effff]
    pci_bus 0000:00: resource 28 [mem 0xb0000000-0xdfffffff]
    pci_bus 0000:00: resource 29 [mem 0xe1000000-0xffffffff]
    pci_bus 0000:00: resource 30 [io 0x0000-0x0cf7]
    pci_bus 0000:00: resource 31 [io 0x0d00-0xffff]
    pci_bus 0000:01: resource 4 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:01: resource 5 [mem 0x000c0000-0x000c1fff]
    pci_bus 0000:01: resource 6 [mem 0x000c2000-0x000c3fff]
    pci_bus 0000:01: resource 7 [mem 0x000c4000-0x000c5fff]
    pci_bus 0000:01: resource 8 [mem 0x000c6000-0x000c7fff]
    pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000c9fff]
    pci_bus 0000:01: resource 10 [mem 0x000ca000-0x000cbfff]
    pci_bus 0000:01: resource 11 [mem 0x000cc000-0x000cdfff]
    pci_bus 0000:01: resource 12 [mem 0x000d0000-0x000d1fff]
    pci_bus 0000:01: resource 13 [mem 0x000d2000-0x000d3fff]
    pci_bus 0000:01: resource 14 [mem 0x000d4000-0x000d5fff]
    pci_bus 0000:01: resource 15 [mem 0x000d6000-0x000d7fff]
    pci_bus 0000:01: resource 16 [mem 0x000d8000-0x000d9fff]
    pci_bus 0000:01: resource 17 [mem 0x000da000-0x000dbfff]
    pci_bus 0000:01: resource 18 [mem 0x000dc000-0x000ddfff]
    pci_bus 0000:01: resource 19 [mem 0x000de000-0x000dffff]
    pci_bus 0000:01: resource 20 [mem 0x000e0000-0x000e1fff]
    pci_bus 0000:01: resource 21 [mem 0x000e2000-0x000e3fff]
    pci_bus 0000:01: resource 22 [mem 0x000e4000-0x000e5fff]
    pci_bus 0000:01: resource 23 [mem 0x000e6000-0x000e7fff]
    pci_bus 0000:01: resource 24 [mem 0x000e8000-0x000e9fff]
    pci_bus 0000:01: resource 25 [mem 0x000ea000-0x000ebfff]
    pci_bus 0000:01: resource 26 [mem 0x000ec000-0x000edfff]
    pci_bus 0000:01: resource 27 [mem 0x000ee000-0x000effff]
    pci_bus 0000:01: resource 28 [mem 0xb0000000-0xdfffffff]
    pci_bus 0000:01: resource 29 [mem 0xe1000000-0xffffffff]
    pci_bus 0000:01: resource 30 [io 0x0000-0x0cf7]
    pci_bus 0000:01: resource 31 [io 0x0d00-0xffff]
    pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    pci_bus 0000:02: resource 1 [mem 0xc0a00000-0xc11fffff]
    pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc07fffff 64bit pref]
    pci_bus 0000:04: resource 1 [mem 0xc0900000-0xc09fffff]
    pci_bus 0000:05: resource 0 [io 0x1000-0x1fff]
    pci_bus 0000:05: resource 1 [mem 0xc0800000-0xc08fffff]
    NET: Registered protocol family 2
    TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 524288 bind 65536)
    TCP: reno registered
    UDP hash table entries: 2048 (order: 4, 65536 bytes)
    UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    NET: Registered protocol family 1
    pci 0000:00:01.0: Boot video device
    pci 0000:04:00.0: xHCI BIOS handoff failed (BIOS bug ?) 00010401
    PCI: CLS 32 bytes, default 64
    Unpacking initramfs...
    Freeing initrd memory: 3780k freed
    PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    software IO TLB [mem 0x92ea0000-0x96e9ffff] (64MB) mapped at [ffff880092ea0000-ffff880096e9ffff]
    LVT offset 0 assigned for vector 0x400
    perf: AMD IBS detected (0x000000ff)
    audit: initializing netlink socket (disabled)
    type=2000 audit(1351625753.796:1): initialized
    HugeTLB registered 2 MB page size, pre-allocated 0 pages
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    msgmni has been set to 7108
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pcieport 0000:00:15.0: irq 40 for MSI/MSI-X
    pcieport 0000:00:15.1: irq 41 for MSI/MSI-X
    pcieport 0000:00:15.2: irq 42 for MSI/MSI-X
    pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
    pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
    pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
    pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
    pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
    pcieport 0000:00:15.2: Signaling PME through PCIe PME interrupt
    pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
    pcie_pme 0000:00:15.2:pcie01: service driver pcie_pme loaded
    vesafb: mode is 1024x768x32, linelength=4096, pages=0
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90003000000, using 3072k, total 3072k
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    GHES: HEST is not enabled!
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Linux agpgart interface v0.103
    i8042: PNP: No PS/2 controller found. Probing ports directly.
    i8042: No controller found
    mousedev: PS/2 mouse device common for all mice
    rtc_cmos 00:04: RTC can wake from S4
    rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
    cpuidle: using governor ladder
    cpuidle: using governor menu
    drop_monitor: Initializing network drop monitor service
    TCP: cubic registered
    NET: Registered protocol family 10
    NET: Registered protocol family 17
    Key type dns_resolver registered
    PM: Hibernation image not present or could not be loaded.
    registered taskstats version 1
    rtc_cmos 00:04: setting system clock to 2012-10-30 19:35:54 UTC (1351625754)
    Freeing unused kernel memory: 772k freed
    Write protecting the kernel read-only data: 8192k
    Freeing unused kernel memory: 1408k freed
    Freeing unused kernel memory: 568k freed
    starting version 195
    [drm] Initialized drm 1.1.0 20060810
    [drm] radeon defaulting to kernel modesetting.
    [drm] radeon kernel modesetting enabled.
    checking generic (b0000000 300000) vs hw (b0000000 10000000)
    fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
    Console: switching to colour dummy device 80x25
    [drm] initializing kernel modesetting (PALM 0x1002:0x9804 0x1002:0x9804).
    [drm] register mmio base: 0xC1200000
    [drm] register mmio size: 262144
    ATOM BIOS: AMD
    radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
    radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF
    mtrr: no more MTRRs available
    [drm] Detected VRAM RAM=384M, BAR=256M
    [drm] RAM width 32bits DDR
    [TTM] Zone kernel: Available graphics memory: 1821210 kiB
    [TTM] Initializing pool allocator
    [TTM] Initializing DMA pool allocator
    [drm] radeon: 384M of VRAM memory ready
    [drm] radeon: 512M of GTT memory ready.
    [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [drm] Driver supports precise vblank timestamp query.
    radeon 0000:00:01.0: irq 43 for MSI/MSI-X
    radeon 0000:00:01.0: radeon: using MSI.
    [drm] radeon: irq initialized.
    [drm] GART: num cpu pages 131072, num gpu pages 131072
    [drm] Loading PALM Microcode
    [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
    radeon 0000:00:01.0: WB enabled
    radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff880147450c00
    [drm] ring test on 0 succeeded in 1 usecs
    [drm] ib test on ring 0 succeeded in 0 usecs
    [drm] Radeon Display Connectors
    [drm] Connector 0:
    [drm] HDMI-A-1
    [drm] HPD1
    [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
    [drm] Encoders:
    [drm] DFP1: INTERNAL_UNIPHY
    [drm] Connector 1:
    [drm] DP-1
    [drm] HPD2
    [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
    [drm] Encoders:
    [drm] DFP2: INTERNAL_UNIPHY
    [drm] Connector 2:
    [drm] VGA-1
    [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
    [drm] Encoders:
    [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [drm] Internal thermal controller without fan control
    [drm] radeon: power management initialized
    [drm] fb mappable at 0xB0142000
    [drm] vram apper at 0xB0000000
    [drm] size 8294400
    [drm] fb depth is 24
    [drm] pitch is 7680
    fbcon: radeondrmfb (fb0) is primary device
    Console: switching to colour frame buffer device 160x48
    fb0: radeondrmfb frame buffer device
    drm: registered panic notifier
    [drm] Initialized radeon 2.24.0 20080528 for 0000:00:01.0 on minor 0
    ACPI: bus type usb registered
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:12.2: EHCI Host Controller
    ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    QUIRK: Enable AMD PLL fix
    ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    ehci_hcd 0000:00:12.2: debug port 1
    ehci_hcd 0000:00:12.2: irq 17, io mem 0xc124c600
    SCSI subsystem initialized
    xhci_hcd 0000:04:00.0: xHCI Host Controller
    xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
    xhci_hcd 0000:04:00.0: irq 17, io mem 0xc0900000
    xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
    xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
    xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
    xHCI xhci_add_endpoint called for root hub
    xHCI xhci_check_bandwidth called for root hub
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    xhci_hcd 0000:04:00.0: xHCI Host Controller
    xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
    ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    xHCI xhci_add_endpoint called for root hub
    xHCI xhci_check_bandwidth called for root hub
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 5 ports detected
    ehci_hcd 0000:00:13.2: EHCI Host Controller
    ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
    ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    ehci_hcd 0000:00:13.2: debug port 1
    ehci_hcd 0000:00:13.2: irq 17, io mem 0xc124c500
    ACPI: bus type scsi registered
    libata version 3.00 loaded.
    ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 5 ports detected
    ehci_hcd 0000:00:16.2: EHCI Host Controller
    ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 5
    ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    ehci_hcd 0000:00:16.2: debug port 1
    ehci_hcd 0000:00:16.2: irq 17, io mem 0xc124c400
    ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 4 ports detected
    ahci 0000:00:11.0: version 3.0
    ahci 0000:00:11.0: AHCI 0001.0200 32 slots 3 ports 3 Gbps 0x31 impl SATA mode
    ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio ccc sxs
    scsi0 : ahci
    scsi1 : ahci
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    scsi2 : ahci
    scsi3 : ahci
    scsi4 : ahci
    scsi5 : ahci
    ata1: SATA max UDMA/133 abar m1024@0xc124c000 port 0xc124c100 irq 19
    ata2: DUMMY
    ata3: DUMMY
    ata4: DUMMY
    ata5: SATA max UDMA/133 abar m1024@0xc124c000 port 0xc124c300 irq 19
    ata6: SATA max UDMA/133 abar m1024@0xc124c000 port 0xc124c380 irq 19
    ohci_hcd 0000:00:12.0: OHCI Host Controller
    ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 6
    ohci_hcd 0000:00:12.0: irq 18, io mem 0xc124b000
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 5 ports detected
    ohci_hcd 0000:00:13.0: OHCI Host Controller
    ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 7
    ohci_hcd 0000:00:13.0: irq 18, io mem 0xc124a000
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 5 ports detected
    ohci_hcd 0000:00:14.5: OHCI Host Controller
    ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 8
    ohci_hcd 0000:00:14.5: irq 18, io mem 0xc1249000
    hub 8-0:1.0: USB hub found
    hub 8-0:1.0: 2 ports detected
    ohci_hcd 0000:00:16.0: OHCI Host Controller
    ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 9
    ohci_hcd 0000:00:16.0: irq 18, io mem 0xc1248000
    hub 9-0:1.0: USB hub found
    hub 9-0:1.0: 4 ports detected
    tsc: Refined TSC clocksource calibration: 997.874 MHz
    Switching to clocksource tsc
    ata5: SATA link down (SStatus 0 SControl 300)
    ata6: SATA link down (SStatus 0 SControl 300)
    ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata1.00: ATA-8: SAMSUNG HM251HI, 2AJ10001, max UDMA/133
    ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    ata1.00: configured for UDMA/133
    scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM251HI 2AJ1 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    usb 6-3: new full-speed USB device number 2 using ohci_hcd
    EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    usb 9-3: new low-speed USB device number 2 using ohci_hcd
    systemd 195 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
    Set hostname to <GTC001>.
    Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    Starting Forward Password Requests to Wall Directory Watch.
    Started Forward Password Requests to Wall Directory Watch.
    Starting Remote File Systems.
    Reached target Remote File Systems.
    Starting Delayed Shutdown Socket.
    Listening on Delayed Shutdown Socket.
    Starting /dev/initctl Compatibility Named Pipe.
    Listening on /dev/initctl Compatibility Named Pipe.
    Starting Arbitrary Executable File Formats File System Automount Point.
    Set up automount Arbitrary Executable File Formats File System Automount Point.
    Starting Dispatch Password Requests to Console Directory Watch.
    Started Dispatch Password Requests to Console Directory Watch.
    Starting udev Kernel Socket.
    Listening on udev Kernel Socket.
    Starting udev Control Socket.
    Listening on udev Control Socket.
    Starting Encrypted Volumes.
    Reached target Encrypted Volumes.
    Expecting device dev-disk-by\x2dlabel-swap.device...
    Expecting device dev-disk-by\x2dlabel-boot.device...
    Expecting device dev-disk-by\x2dlabel-home.device...
    Starting Journal Socket.
    Listening on Journal Socket.
    Started File System Check on Root Device.
    Starting Remount Root and Kernel File Systems...
    Starting Apply Kernel Variables...
    Mounting Debug File System...
    Mounting POSIX Message Queue File System...
    Starting udev Coldplug all Devices...
    Starting Setup Virtual Console...
    Mounting Huge Pages File System...
    Started Set Up Additional Binary Formats.
    Started Load Kernel Modules.
    Mounted Configuration File System.
    Mounted FUSE Control File System.
    Starting udev Kernel Device Manager...
    Starting Journal Service...
    Started Journal Service.
    Started Apply Kernel Variables.
    Mounted Debug File System.
    Mounted POSIX Message Queue File System.
    Started Setup Virtual Console.
    Mounted Huge Pages File System.
    EXT4-fs (sda3): re-mounted. Opts: data=ordered
    starting version 195
    Journal started
    Started udev Kernel Device Manager.
    Started Remount Root and Kernel File Systems.
    Started udev Coldplug all Devices.
    Starting Local File Systems (Pre).
    Reached target Local File Systems (Pre).
    Mounting /tmp...
    Starting Load Random Seed...
    Mounted /tmp.
    Started Load Random Seed.
    input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    ACPI: Power Button [PWRB]
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    ACPI: Lid Switch [LID]
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    ACPI: Power Button [PWRF]
    [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    acpi device:35: registered as cooling_device0
    ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input3
    thermal LNXTHERM:00: registered as thermal_zone0
    ACPI: Thermal Zone [THZ0] (59 C)
    microcode: CPU0: patch_level=0x05000101
    input: PC Speaker as /devices/platform/pcspkr/input/input4
    ACPI: Fan [Z0F0] (off)
    ACPI: Fan [Z0F1] (off)
    ACPI: Fan [Z0F2] (off)
    ACPI: Fan [Z0F3] (off)
    ACPI: acpi_idle registered with cpuidle
    ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMB_.SMB0 1 (20120711/utaddress-251)
    ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    r8169 0000:02:00.0: irq 47 for MSI/MSI-X
    r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc90000622000, 00:01:c0:0c:b0:7c, XID 081000c0 IRQ 47
    r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:16.0/usb9/9-3/9-3:1.0/input/input5
    hid-generic 0003:04F2:0408.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:16.0-3/input0
    input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:16.0/usb9/9-3/9-3:1.1/input/input6
    hid-generic 0003:04F2:0408.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:16.0-3/input1
    microcode: CPU0: new patch_level=0x0500010d
    microcode: CPU1: patch_level=0x05000101
    microcode: CPU1: new patch_level=0x0500010d
    microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    Bluetooth: Core ver 2.16
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: SCO socket layer initialized
    cfg80211: Calling CRDA to update world regulatory domain
    usbcore: registered new interface driver btusb
    kvm: Nested Virtualization enabled
    kvm: Nested Paging enabled
    powernow-k8: Found 1 AMD G-T40E Processor (2 cpu cores) (version 2.20.00)
    powernow-k8: 0 : pstate 0 (1000 MHz)
    powernow-k8: 1 : pstate 1 (800 MHz)
    Starting Bluetooth.
    Reached target Bluetooth.
    Found device SAMSUNG_HM251HI.
    Activating swap /dev/disk/by-label/swap...
    rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
    Adding 511996k swap on /dev/sda2. Priority:-1 extents:1 across:511996k
    Activated swap /dev/disk/by-label/swap.
    Starting Swap.
    Reached target Swap.
    ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
    rtlwifi: wireless switch is on
    Found device SAMSUNG_HM251HI.
    Starting File System Check on /dev/disk/by-label/home...
    snd_hda_intel 0000:00:01.1: irq 48 for MSI/MSI-X
    Found device SAMSUNG_HM251HI.
    Starting File System Check on /dev/disk/by-label/boot...
    input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
    hda_codec: ALC888: SKU not ready 0x00000100
    input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input8
    input: HDA ATI SB SPDIF as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
    input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
    input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
    input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
    input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
    input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
    input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
    input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
    input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input17
    boot: clean, 318/51200 files, 38007/204800 blocks
    Starting Sound Card.
    Reached target Sound Card.
    Started File System Check on /dev/disk/by-label/boot.
    Mounting /boot...
    EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
    EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
    Mounted /boot.
    home: clean, 1775/128000 files, 92385/512000 blocks
    Started File System Check on /dev/disk/by-label/home.
    Mounting /home...
    EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
    Mounted /home.
    Starting Local File Systems.
    Reached target Local File Systems.
    Starting Recreate Volatile Files and Directories...
    Starting Trigger Flushing of Journal to Persistent Storage...
    Allowing system journal files to grow to 563.6M.
    Started Trigger Flushing of Journal to Persistent Storage.
    Started Recreate Volatile Files and Directories.
    Starting System Initialization.
    Reached target System Initialization.
    Starting Restore Sound Card State...
    Starting D-Bus System Message Bus Socket.
    Listening on D-Bus System Message Bus Socket.
    Starting Sockets.
    Reached target Sockets.
    Starting Daily Cleanup of Temporary Directories.
    Started Daily Cleanup of Temporary Directories.
    Starting Basic System.
    Starting MySQL Server...
    Started SSH Key Generation.
    Starting OpenSSH Daemon...
    Started OpenSSH Daemon.
    Starting Permit User Sessions...
    Starting D-Bus System Message Bus...
    Started D-Bus System Message Bus.
    Starting Login Service...
    version 5.6.2 starting
    r8169 0000:02:00.0: eth0: link down
    r8169 0000:02:00.0: eth0: link down
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    Started Restore Sound Card State.
    Started Permit User Sessions.
    Starting Getty on tty1...
    Started Getty on tty1.
    Starting Login Prompts.
    Reached target Login Prompts.
    New seat seat0.
    Started Login Service.
    Watching system buttons on /dev/input/event2 (Power Button)
    Watching system buttons on /dev/input/event3 (Video Bus)
    Watching system buttons on /dev/input/event0 (Power Button)
    Watching system buttons on /dev/input/event1 (Lid Switch)
    eth0: waiting for carrier
    Server listening on 0.0.0.0 port 22.
    Server listening on :: port 22.
    eth0: carrier acquired
    eth0: sending IPv6 Router Solicitation
    eth0: sendmsg: Cannot assign requested address
    eth0: broadcasting for a lease
    r8169 0000:02:00.0: eth0: link up
    121030 13:36:02 InnoDB: The InnoDB memory heap is disabled
    121030 13:36:02 InnoDB: Mutexes and rw_locks use GCC atomic builtins
    121030 13:36:02 InnoDB: Compressed tables use zlib 1.2.7
    121030 13:36:02 InnoDB: Initializing buffer pool, size = 128.0M
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    121030 13:36:02 InnoDB: Completed initialization of buffer pool
    121030 13:36:02 InnoDB: highest supported file format is Barracuda.
    eth0: offered 192.168.10.25 from 192.168.10.1
    eth0: acknowledged 192.168.10.25 from 192.168.10.1
    eth0: leased 192.168.10.25 for 86400 seconds
    forked to background, child pid 298
    Started dhcpcd on eth0.
    Starting Network.
    Reached target Network.
    Starting Network Time Service...
    ntpd [email protected] Tue Aug 21 15:06:24 UTC 2012 (1)
    Started Network Time Service.
    proto: precision = 0.303 usec
    ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
    Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
    Listen and drop on 1 v6wildcard :: UDP 123
    Listen normally on 2 lo 127.0.0.1 UDP 123
    Listen normally on 3 eth0 192.168.10.25 UDP 123
    Listen normally on 4 lo ::1 UDP 123
    peers refreshed
    Listening on routing socket on fd #21 for interface updates
    121030 13:36:03 InnoDB: Waiting for the background threads to start
    121030 13:36:04 InnoDB: 1.1.8 started; log sequence number 2389668
    121030 13:36:04 [Warning] Neither --relay-log nor --relay-log-index were used; so replication may break when this MySQL server acts as a slave and has his hostname changed!! Please use '--relay-log=GTC001-relay-bin' to avoid this problem.
    121030 13:36:05 [Note] Event Scheduler: Loaded 0 events
    121030 13:36:05 [Note] /usr/bin/mysqld: ready for connections.
    Version: '5.5.28-log' socket: '/var/run/mysqld/mysqld.sock' port: 0 Source distribution
    Started MySQL Server.
    Starting Multi-User.
    Reached target Multi-User.
    Starting Graphical Interface.
    Reached target Graphical Interface.
    Starting Update UTMP about System Runlevel Changes...
    Started Update UTMP about System Runlevel Changes.
    Startup finished in 3s 417ms 226us (kernel) + 8s 386ms 264us (userspace) = 11s 803ms 490us.
    Bad boot:
    Allowing runtime journal files to grow to 177.8M.
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 3.6.3-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Oct 22 10:23:56 CEST 2012
    Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=842ee169-3e01-4f26-b5bd-900ad1142339 ro quiet
    e820: BIOS-provided physical RAM map:
    BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    BIOS-e820: [mem 0x0000000000100000-0x0000000096e9ffff] usable
    BIOS-e820: [mem 0x0000000096ea0000-0x000000009733afff] reserved
    BIOS-e820: [mem 0x000000009733b000-0x00000000973bafff] ACPI NVS
    BIOS-e820: [mem 0x00000000973bb000-0x000000009741afff] ACPI data
    BIOS-e820: [mem 0x000000009741b000-0x0000000097dfffff] usable
    BIOS-e820: [mem 0x0000000097e00000-0x0000000097ffffff] reserved
    BIOS-e820: [mem 0x00000000fec00000-0x00000000fecfffff] reserved
    BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
    BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
    BIOS-e820: [mem 0x0000000100000000-0x000000014effffff] usable
    NX (Execute Disable) protection: active
    DMI 2.6 present.
    DMI: AMD Brazos/Inagua, BIOS BZ_2.1.0.333_8 X64 03/02/2012
    e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    e820: remove [mem 0x000a0000-0x000fffff] usable
    No AGP bridge found
    e820: last_pfn = 0x14f000 max_arch_pfn = 0x400000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 000000000 mask F80000000 write-back
    1 base 080000000 mask FF0000000 write-back
    2 base 090000000 mask FF8000000 write-back
    3 base 0FFE00000 mask FFFE00000 write-protect
    4 base 0FFF79000 mask FFFFFF000 uncachable
    5 base 0FFF7A000 mask FFFFFE000 uncachable
    6 base 0FFF7C000 mask FFFFFC000 uncachable
    7 base 0FFF80000 mask FFFFE0000 uncachable
    TOM2: 000000014f000000 aka 5360M
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820: last_pfn = 0x97e00 max_arch_pfn = 0x400000000
    found SMP MP-table at [mem 0x000fbaa0-0x000fbaaf] mapped at [ffff8800000fbaa0]
    initial memory mapped: [mem 0x00000000-0x1fffffff]
    Base memory trampoline at [ffff880000097000] 97000 size 24576
    Using GB pages for direct mapping
    init_memory_mapping: [mem 0x00000000-0x97dfffff]
    [mem 0x00000000-0x7fffffff] page 1G
    [mem 0x80000000-0x97dfffff] page 2M
    kernel direct mapping tables up to 0x97dfffff @ [mem 0x1fbfe000-0x1fffffff]
    init_memory_mapping: [mem 0x100000000-0x14effffff]
    [mem 0x100000000-0x13fffffff] page 1G
    [mem 0x140000000-0x14effffff] page 2M
    kernel direct mapping tables up to 0x14effffff @ [mem 0x97dfe000-0x97dfffff]
    RAMDISK: [mem 0x3788e000-0x37c3efff]
    ACPI: RSDP 00000000000f00e0 00024 (v02 PTEC )
    ACPI: XSDT 000000009741a120 00074 (v01 PTEC OEMTABLE 00000002 PTEC 00000002)
    ACPI: FACP 000000009740d000 000F4 (v03 PTEC OEMTABLE 00000002 PTL 00000002)
    ACPI: DSDT 000000009740e000 0B911 (v01 PTEC OEMTABLE 00001000 PTEC 00000002)
    ACPI: FACS 00000000973a8000 00040
    ACPI: HPET 000000009740c000 00038 (v01 PTEC OEMTABLE 00000002 PTL 00000002)
    ACPI: APIC 000000009740b000 0005E (v02 PTEC OEMTABLE 00000002 PTL 00000002)
    ACPI: MCFG 000000009740a000 0003C (v01 PTEC OEMTABLE 00000002 PTL 00000002)
    ACPI: UEFI 0000000097409000 0003E (v01 PTEC OEMTABLE 00000002 PTL 00000002)
    ACPI: UEFI 0000000097408000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
    ACPI: SSDT 0000000097407000 0030C (v01 AMD POWERNOW 00000001 AMD 00000001)
    ACPI: SSDT 0000000097405000 0168E (v02 AMD ALIB 00000001 MSFT 04000000)
    ACPI: SSDT 0000000097404000 00F15 (v01 AMD SB800 00000001 INTL 20061109)
    ACPI: UEFI 0000000097403000 0012A (v01 PTEC OEMTABLE 00000002 PTL 00000002)
    ACPI: Local APIC address 0xfee00000
    No NUMA configuration found
    Faking a node at [mem 0x0000000000000000-0x000000014effffff]
    Initmem setup node 0 [mem 0x00000000-0x14effffff]
    NODE_DATA [mem 0x14effc000-0x14effffff]
    [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ac00000-ffff88014e5fffff] on node 0
    Zone ranges:
    DMA [mem 0x00010000-0x00ffffff]
    DMA32 [mem 0x01000000-0xffffffff]
    Normal [mem 0x100000000-0x14effffff]
    Movable zone start for each node
    Early memory node ranges
    node 0: [mem 0x00010000-0x0009cfff]
    node 0: [mem 0x00100000-0x96e9ffff]
    node 0: [mem 0x9741b000-0x97dfffff]
    node 0: [mem 0x100000000-0x14effffff]
    On node 0 totalpages: 944146
    DMA zone: 64 pages used for memmap
    DMA zone: 6 pages reserved
    DMA zone: 3911 pages, LIFO batch:0
    DMA32 zone: 16320 pages used for memmap
    DMA32 zone: 600261 pages, LIFO batch:31
    Normal zone: 5056 pages used for memmap
    Normal zone: 318528 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x808
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x43538210 base: 0xfed00000
    smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 40
    PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    PM: Registered nosave memory: 0000000096ea0000 - 000000009733b000
    PM: Registered nosave memory: 000000009733b000 - 00000000973bb000
    PM: Registered nosave memory: 00000000973bb000 - 000000009741b000
    PM: Registered nosave memory: 0000000097e00000 - 0000000098000000
    PM: Registered nosave memory: 0000000098000000 - 00000000fec00000
    PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
    PM: Registered nosave memory: 00000000fed00000 - 00000000fed80000
    PM: Registered nosave memory: 00000000fed80000 - 00000000fed81000
    PM: Registered nosave memory: 00000000fed81000 - 00000000ffe00000
    PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
    e820: [mem 0x98000000-0xfebfffff] available for PCI devices
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    PERCPU: Embedded 28 pages/cpu @ffff88014ec00000 s84608 r8192 d21888 u1048576
    pcpu-alloc: s84608 r8192 d21888 u1048576 alloc=1*2097152
    pcpu-alloc: [0] 0 1
    Built 1 zonelists in Node order, mobility grouping on. Total pages: 922700
    Policy zone: Normal
    Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=842ee169-3e01-4f26-b5bd-900ad1142339 ro quiet
    PID hash table entries: 4096 (order: 3, 32768 bytes)
    __ex_table already sorted, skipping sort
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Memory: 3635892k/5488640k available (4726k kernel code, 1712056k absent, 140692k reserved, 4144k data, 772k init)
    SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Preemptible hierarchical RCU implementation.
    RCU dyntick-idle grace-period acceleration is enabled.
    Dump stacks of tasks blocking RCU-preempt GP.
    RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
    NR_IRQS:4352 nr_irqs:512 16
    spurious 8259A interrupt: IRQ7.
    Console: colour dummy device 80x25
    console [tty0] enabled
    allocated 15204352 bytes of page_cgroup
    please try 'cgroup_disable=memory' option if you don't want memory cgroups
    hpet clockevent registered
    tsc: Fast TSC calibration using PIT
    tsc: Detected 997.850 MHz processor
    Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.85 BogoMIPS (lpj=3326166)
    pid_max: default: 32768 minimum: 301
    Security Framework initialized
    AppArmor: AppArmor disabled by boot time parameter
    Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Mount-cache hash table entries: 256
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    Initializing cgroup subsys net_cls
    Initializing cgroup subsys blkio
    tseg: 0097e00000
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 6 MCE banks
    Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
    tlb_flushall_shift is 0xffffffff
    ACPI: Core revision 20120711
    ftrace: allocating 18348 entries in 72 pages
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    smpboot: CPU0: AMD G-T40E Processor stepping 00
    Performance Events: AMD PMU driver.
    ... version: 0
    ... bit width: 48
    ... generic registers: 4
    ... value mask: 0000ffffffffffff
    ... max period: 00007fffffffffff
    ... fixed-purpose events: 0
    ... event mask: 000000000000000f
    NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    smpboot: Booting Node 0, Processors #1 OK
    Brought up 2 CPUs
    smpboot: Total of 2 processors activated (3992.70 BogoMIPS)
    devtmpfs: initialized
    PM: Registering ACPI NVS region [mem 0x9733b000-0x973bafff] (524288 bytes)
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xe0000000-0xe1ffffff] (base 0xe0000000)
    PCI: not using MMCONFIG
    PCI: Using configuration type 1 for base access
    PCI: Using configuration type 1 for extended access
    bio: create slab <bio-0> at 0
    ACPI: Added _OSI(Module Device)
    ACPI: Added _OSI(Processor Device)
    ACPI: Added _OSI(3.0 _SCP Extensions)
    ACPI: Added _OSI(Processor Aggregator Device)
    ACPI: EC: Look up EC in DSDT
    [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xe0000000-0xe1ffffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xe1ffffff] reserved in ACPI motherboard resources
    [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    ACPI: Power Resource [P0L0] (off)
    ACPI: Power Resource [P0L1] (off)
    ACPI: Power Resource [P0L2] (off)
    ACPI: Power Resource [P0L3] (off)
    ACPI: ACPI Dock Station Driver: 2 docks/bays found
    PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    pci_root PNP0A08:00: ignoring host bridge window [mem 0x000ce000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff])
    pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
    PCI host bridge to bus 0000:00
    pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
    pci_bus 0000:00: root bus resource [bus 00-ff]
    pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c1fff]
    pci_bus 0000:00: root bus resource [mem 0x000c2000-0x000c3fff]
    pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c5fff]
    pci_bus 0000:00: root bus resource [mem 0x000c6000-0x000c7fff]
    pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000c9fff]
    pci_bus 0000:00: root bus resource [mem 0x000ca000-0x000cbfff]
    pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cdfff]
    pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d1fff]
    pci_bus 0000:00: root bus resource [mem 0x000d2000-0x000d3fff]
    pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d5fff]
    pci_bus 0000:00: root bus resource [mem 0x000d6000-0x000d7fff]
    pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000d9fff]
    pci_bus 0000:00: root bus resource [mem 0x000da000-0x000dbfff]
    pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000ddfff]
    pci_bus 0000:00: root bus resource [mem 0x000de000-0x000dffff]
    pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e1fff]
    pci

    I already filed this as a bug on the bugtracker, please join us! https://bugs.archlinux.org/task/31668

  • The new version of itunes has conflited with my cd/dvd drive

    It seems that the new version of Itunes has conflicted with my CD/DVD drive because when I uninstalled and re installed the itunes my drive has stopped working and I now have an error code of 19 - Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) I have tried to update drivers but I am up to date, I have installed and re installed my drive this did not solve the problem.  I am now at a loss as to what to do I have had a live chat with microsoft and they could not reslove it all they wanted to do was sell me another service!!!  Could installing an older version of itunes solve this issue?

    See TS2308: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
    tt2

  • ITunes Download Folder

    I see that there are copies of all the music and movies I have purchased in my iTunes Download Folder with file name *.tmp. The music and movies are also in my library. Can I delete *.tmp version in the Download folder. It seems wasteful of drive space to have two copies of everything.

    Yes, you can delete them if they are in your itunes library.
    iTunes is supposed to delete them - don't know why it didn't.
    In fact, Apple suggests deleting this folder if there are download problems:
    http://support.apple.com/kb/TS2384

Maybe you are looking for