ITunes Drag and Drop - dead!

Using my MacBook Pro I was able to drag and drop in iTunes to transfer music to my iPad Air and iPhone - until recently. On 21 November, I tried to drag and drop some tracks - would not work. I tried dragging and dropping to both iPad Air and iPhone - nothing.
Just for fun I then used iTunes on a PC (Windows) and the same thing - drag and drop would not work. As a matter of fact on either system, MAC or PC, if I checked a song to SYNC - no SYNC!
MacBook Pro: OS X Yosemite Version: 10.10.1
iTunes: 12.0.1.26
iPad Air and iPhone 6
HELP!!!!!!!

Have discovered the issue is with Wacom tablet. Needed to revert to Apple mouse.

Similar Messages

  • Itunes drag and drop disappeared

    itunes 10.4 - I can no longer drag and drop from music library to playlists. I understand I am not alone; drag any fixes?

    Have discovered the issue is with Wacom tablet. Needed to revert to Apple mouse.

  • After installing iTunes 10.5.1, I can no longer drag and drop files into iTunes. Any suggestions?

    Basically when I try to drag files from a folder into iTunes, (drag and drop within iTunes is fine) the little picture of the circle with a slash through it shows up and wont allow me to drop it into iTunes. Does anyone know why this is happening and what I can do to fix it? Thanks. I'm so frustrated I'm about to smash my computer. I've tried uninstalling and reinstalling, restarting my computer, everything I can think of.

    just want to add my annoyance to the pile here. I can't see any logic behind removing the drag and drop function, especially when adding a new folder is now a multi-step process that is far from obvious. to start a new playlist with local folder content you now need to:enter settingsclick into advanced settings (basically all settings now seem to be "advanced"?)manually find and add the foldergo through the adventure of finding the files in your library.
    -- because they may or may not be listed under "local files" - you won't know because Ctrl+F is also removed. so you have to remember/know what the album you added is called and search for that. if you have a mixed bag of file names from various albums, you're basically shafted; there's no way to find them all with a single search.then you can add them to playlisteta: but wait! there's more! if you have more than 15 files? you're **bleep** out of luck, because the search will only display the first 15 hits among your local files, and then show you spotify library tracks.I can't help but feel as though spotify is doing everything they can to stop us using spotify to listen to local files, as bugs that make it more or less impossible persist through multiple versions - and now features that seem to me to be basic functionality are being removed?mega minus points from someone who's been using spotify since 2008.

  • ITunes 11.1 and iOS 7.0.3 won't allow me to drag-and-drop videos onto my iPad?

    I finally updated my iPad 2 (16 GB; Wi-Fi) with the new iOS 7 update (7.0.3), and now it won't let me drag-and-drop items from my iTunes library anymore. It starts to, it seems.  iTunes says "Preparing to sync" and then that just disappears, and nothing else happens.
    Just the other night, I drag-and-dropped some songs onto my iPad (since my iPhone wasn't allowing me to, so I added them to my iPad instead; I'm getting a new iPod touch soon anyways, so this is only temporary), and it worked just fine.  This was before I updated my iOS 7 (iTunes was already at 11.1).
    I've restarted iTunes...many times...
    I've restarted my iPad...many, many times...
    I've restarted the PC...again...
    Checked my storage space; I have plenty for these six videos I want to add on here...
    I have had this iPad set on "manually manage" since I bought it.  It has never known any different.  I've manually synced movies from my old MacBook (backlight dead, and it's not worth the money I'd have to pay to replace it, since this is the second-to-last MacBook Apple made, so it isn't worth much anymore; and this MacBook still has Mac OSX 10.5, so iTunes 11 won't even work with it, so I haven't synced anything from it in MONTHS...), and to my last PC laptop (charging port is broken, so it won't charge even though it works fine when the battery is full; unfortunately, I haven't gotten around to ordering the new part yet).  I've only added three songs from this "new PC" that I'm borrowing.  To my knowledge, it doesn't matter how many different libraries you "sync" to a "manually managed" device, right?  Besides, I just synced music from this third library last week!! 
    What I just don't understand is why it let me the other day, and now it won't.
    And before I updated tonight, my PC didn't even recognize my iPad.  So I pretty much HAD to install that iOS 7 update that had been in my Settings since it came out.
    What is going on? I'm kind of sick of this...the only option it seems is to just completely sync to this one computer, but I'll lose pretty much everything except the few songs I put on here, and my videos.  I have pictures and apps and notes/documents that I DO NOT want to lose.
    Any suggestions?

    Oh, also want to add that the PC I'm currently using is:
    Windows Vista Home Premium Service Pack 2
    My other PC was:
    Windows 7 Ultimate
    My MacBook is:
    Max OSX 10.5.something (the last update available for it. .8 maybe? haha)
    Not sure if this stuff is important, but I thought I'd add it.

  • I want to Sync my iPhone 4 to iTunes however I get an error message from iTunes each time I connect the phone to the PC saying that I should restore to factory settings. Frustrating because it's already annoying enough that I can't drag and drop mp3's!!!

    I have never been so frustrated before in my life with any phone. I find it obnoxious as it is that I cannot simply drag and drop files (especially MP3's) straight from my PC directly into my phone, which I have been used to doing up until now. Everyone who convinced me to get the iPhone has instructed me that my frustration can be fixed by downloading iTunes and syncing it all up via that program (which I have never used before). So, I downloaded the program successfully, however when I connect the iPhone 4 to the PC and iTunes is open, I get an error message that 'iTunes cannot read the content of the iPhone "iPhone" and that I should go to the Preferences tab of the iPhone and select 'restore' to restore this phone to factory settings. First of all, I don't understand why I need to do that. I have already downloaded apps and other important things in the 2 days that I have the phone. I am also scared that it will erase my contacts. This is such a headache. Music is very imporatant to me, but I am getting so frustrated that I don't have freedom over the phone which I thought was supposed to be one of the best out there. I would really appreciate help in this matter. I am sure the phone is great but I am on the verge of taking it back and getting something else.

    Hey joshuafromisr,
    If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/HT1925
    or here:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Best,
    David

  • An mp3 file on my computer will not import to itunes by either the drag-and-drop or the Add File to Library method.  Can't figure out what I'm doing wrong.  My OS is Windows 7.

    I purchased an mp3 from a private website on my laptop.  The itunes library i sync ipod to is on my desktop, so i copied the mp3 onto a flash drive and then into my desktop in the Downloads folder and Desktop folder as well as the itunes music folder, 3 places.  I opened itunes on the desktop and read the instructions for importing music that's already in my computer.  Neither the drag-and-drop or the Add File to Library method works.  I've tried both ways over and over.  Cannot figure out what the problem is.  I do note that the name of the mp3 file doesn't show the .mp3 extension, it appears as simply it's title, Eating Healthy, without any extension at all.  Could the filename be the problem, or do you have any other idea what I'm doing wrong?  My OS is Windows 7, using IE9.  Thanks.
    ADDENDUM AFTER READING ANOTHER DISCUSSION HERE:  I have now tried right clicking the song in Windows Explorer and choosing Open With, clicking itunes.  The mp3 plays in itunes but does not add to the library.

    I don't have a Recently Added playlist.  However, I discovered that the file I had named Eating Healthy was given the name You Can Enjoy Eating Healthy when it copied to iTunes.  I'm guessing iTunes pulled the full name of the piece from the internet.  Upshot--the mp3 did transfer to iTunes on all 3 tries, but I was looking in my alphabetized list under E, not Y, so I didn't see it there.  Thanks for your help. 

  • I can't drag and drop songs onto my iPod from iTunes. (Manual transfer is not working.)  Please help!

    Normally, I just select songs and I'm able to drag and drop them from my library onto my device.  I have an iPod Touch and an iPhone 4.  I want to drag and drop my songs from the library onto my iPod Touch.  I have already selected manual upload instead of automatic sync.  I tried suggestions from the Mac message board (since other people seem to have had a similar issue), and their solutions didn't work for me.  I have restarted both iTunes, my computer, and reconnected my iPod multiple times.  I don't know what's going on, and I can't find a fix anywhere in iTunes help.  If anyone knows what to do, or has any suggestions, please let me know!  Thanks.

    Update: I seem to have fixed the problem!  I went to the "summary" section of my iPod after clicking on the device on the left side of iTunes.  I checked the box that allowed me to "manually manage music and videos" and applied this option.  The songs are syncing!  And, yay, they're playing on my iPod now!  Hopefully, this helps anyone else who might have this problem.  There might be other issues, but this is working for now.

  • Why can't I drag and drop music from a folder on my PC into my iTunes window?

        Why can't I drag and drop music from a folder on my PC into my iTunes window?
    I have not found any article that has answered this question. They have come up with things like open the side bar and it will work, or you are using wrong format of music. Now this all happened when I upgraded to iTunes 10 and has not worked since and it worked fine before. Music format is correct, I have even gone as far as copying a file already in iTunes and trying to add it again. As soon as the files enters the frame of iTunes the music files icon the pointer is carrying turns into a circle with a slash through it.
    ITunes Ver. is 11.1.5.5  Windows Ver. is Windows 8.1 Pro with Media Center
    Files I have tried adding are standard MP3, 256 kbps purchased AAC Audio file, MP3 converted by iTunes into a 256 or 320 kbps AAC Audio file. None can be draged and droped but all can added by going to File/Add File to Library...  or File/Add Folder to Library...
    Add items from your computer to your iTunes library
    Do either of the following:
    1. Drag a file or folder from the desktop to the iTunes window.If you add a folder, all the files it contains are added to your library.
    2. In iTunes, choose File > Add to Library, locate a file or folder, and click Open.
         I can add files and folders by doing number 2 above but can not doing number 1
    I have gone as far as uninstalling iTunes and reinstalling per apple procedures below.
    Steps
    1. Remove iTunes and its related components from the Control Panel
    Use the Control Panel to uninstall iTunes and related software components in the following order and restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order or only uninstalling some of these components may have unintended effects.

    I had this problem on Windows 8.1.1 and iTunes 11.2.2.3
    To resolve it from within Itunes I did :  Edit, Preferences, Sharing.
    I took the tick out of "Share my library on my local network"
    Click OK.
    Closed iTunes/
    Reopened iTunes and I can drag and drop.
    I went back into Edit, Preferences, Sharing and put the tick back and clicked OK.
    Works fine now.

  • I have a 5th gen iPod Touch. I have made playlists in iTunes. I need to get them to the iPod. When I had a Classic, it was automatic. You could drag and drop using iTunes music to the playlist in iTunes and it would automatically sync to the Classic.

    I have a 5th gen iPoc Touch. In the past, with the Classic, I could drag and drop from my iTunes music to a Classic playlist through iTunes. Now, the playlist I create in iTunes doesn't show on the Touch. I have maybe 29 GB of music on my Touch. I have already created playlists in iTunes that have substantial amounts of songs in each. How can I get those playlists on the Touch without doing a total sync that wipes the iPod? Is there a way to do it?
    As well, I am noticing here that my 5th gen iPod doesn't show as a registered device. How do I register it?

    For how to sync see:
    iTunes: Syncing media content to iOS devices and iPod       
    Try syncing using the manual method                
    Managing content manually on iPhone, iPad, and iPod
    This may also help:
    Adjusting to iTunes 12

  • How do I drag and drop files between computers when using Home Sharing in ITunes?

    How can I drag music files between computers while using Home Sharing? An older version of ITunes had a Home Sharing icon in the column browser near the playlist so it was easy to drag and drop.

    Hello cacalenni,
    Thanks for using the Apple Support Communities. I understand that you wish to learn how to import songs using Home Sharing in the new iTunes. The following resource should assist you in doing so:
    iTunes 12 for Mac: Use Home Sharing to import items from another iTunes library
    http://support.apple.com/kb/PH19614
    Cheers,
    Matt M.

  • I want to take a voice memo off my iPhone, put it into iTunes Library and convert it to an .mp3.  How do I get the voice memos from my phone?  I can't seem to move them out of the Devices folder, no matter how much I try to copy and paste or drag and drop

    I want to take a voice memo off my iPhone, turn it into and .mp3, and email it.  My iPhone shows up under "Devices" in my iTunes but doesn't allow me to move the voice memo files I see sitting there into my Library no matter how much copying and pasting or dragging and dropping I try to do. 
    Also, I need to convert the file to an .mp3. 
    How come no voice memo files show up when I go into my iPhone via My Computer?  All it shows are the videos and pictures in the DCIM folder, but not the voice memos.  Is there another way to access the voice memos other than through iTunes? 

    Email it to yourself, then save the file and then see if you can convert it to MP3.

  • I would like to copy all the songs from one Ipod into another. All the songs are into my Itunes account, I tried to drag and drop the songs from the old Ipod to the new one but it doesn't work. Is there a way to do it ?

    Hello everybody,
    I would like to copy all the songs from one Ipod into another. All the songs are into my Itunes account, I tried to drag and drop the songs from the old Ipod to the new one but it doesn't work. Is there a way to do it ?
    I share one Itunes account with other people from my family and one person would like to keep the same songs on the new Ipod as the ones which were on the old one.
    Thanks in advance for your answer.
    Yan

    Hello Chris,
    Thanks for your answer. I was hoping for an easier answer. Too bad there is no drag and drop solution, it would have been much easier.
    Thanks for answering so fast.
    Bye.
    Yan

  • ITunes won't let me drag and drop anymore

    Last friday, I closed my Macbook and it never started again. I bought a new one. The guy at the Mac Store said, "Just plug in your iPhone, enter your pw, and everything will work like it used to." Of course, I left the store thinking, "No way is that going to happen," but I didn't stay and fight. Of course, I plugged in my iPhone, immidately my Mac started saying, "You do not have sufficient permissions." To get rid of it, I read a post that said I should select to sync and then unsync everything from the phone (which deleted everything of course, but I'm not that upset about). Anyhow, the iPhone syncs now, but the lingering issue is that my old computer let me drag and drop MP3 files directly from my Finder window to the iPhone music library in iTunes. I DID NOT HAVE TO USE THE ITUNES LIBRARY AND I DID NOT HAVE TO CREATE PLAYLISTS. (I hate people who capitolize things, but I've read in several other posts where people say, "That was never possible to drag and drop, you always had to create playlists." No, you did not. I gurantee you because I've never done it). To state it just once more, I did NOT load the songs into iTunes, then go from iTunes to the iPhone, but instead, with iTunes open, and the iPhone plugged it, I would select the mp3 in the Finder window, then drag it to the part of iTunes which allows me access to the iPhone, and the iPhone section of iTunes (not the main iTunes library on my Macbook, but the iPhone itself) would become highlighted in blue, then I would release the trackpad and the song would load onto the iPhone (but never be associated with or loaded into the iTunes library for my Macbook).
    Now when I drag the mp3 over, the iPhone section stays gray and won't let me do it.
    How can I fix this? I detest iTunes. I'd be in love with Apple completely if it weren't for iTunes, which is constantly broken and never works. I'm happy with my music stored in my own filing mechanism, with my own method of tagging them, and I don't want to conform, I don't want to "get used to it."
    Please someone tell me how to fix this! (Before it messes up my iPad as well).
    PS... Of course, in the time my computer broke and I bought the new one, Apple released yet another updated version of iTunes, which they forced me to update before I could even use it. So, I don't know if the phone didn't sync over correctly or the update didn't work.

    Oh, also want to add that the PC I'm currently using is:
    Windows Vista Home Premium Service Pack 2
    My other PC was:
    Windows 7 Ultimate
    My MacBook is:
    Max OSX 10.5.something (the last update available for it. .8 maybe? haha)
    Not sure if this stuff is important, but I thought I'd add it.

  • No longer able to drag and drop files to an iPhone in iTunes.

    I accidentally unplugged my iPhone 3G before it was finished syncing in iTunes and I lost all of music, playlist, podcasts, etc. I had copied to it. The problem I am now having is that I can no longer drag and drop anything to my iPhone in the Devices list. The only way that I can now get files onto it is by syncing with my existing play lists, etc from iTunes. I can't even select it in the Devices list and create a new playlist on it by clicking the new playlist button at the bottom. I really liked the option to just drag whatever I wanted onto it. It's really a pain now. It does sync properly, so thankfully that works.
    Does anyone know why I know why I'm no longer able to drag and drop music, etc. to an iPhone in iTunes.
    Thanks

    Man, I can't believe it...that was the fix. I had it checked previously, obviously because that's how I was doing it before. Don't know how it got unchecked, but that IS the solution. I thought something bad had happened and wasn't thinking clearly – feel like an idiot now.
    THANKS for you help.

  • I can't drag and drop iTunes music files into Roxio Jam 6 anymore and, now I have to import music one song at a time by using the " " or "-" buttons on the bottom. What is going on? G5 Dual 2 Ghz and OS 10.4.11

    Hi. I have not used Roxio Jam for quite a long time and I just wanted to make a few CDs. Jam used to work easily and well. I have a problem. I can't drag and drop iTunes music files anymore and, now I have to import music one song at a time by using the "+" or "-" buttons on the bottom. What is going on? I trashed the preferences file and restarted Jam to no avail. I also have selected that Jam should open files with iTunes in the Jam preferences. I have a G5 DP 2Ghz PPC  machine with OS 10.4.11, iTunes 9.2.1 and Quicktime's version is 7.6.4. I have 2 GB of RAM and the machine has dual 1.25 Ghz. processors plus a 500 GB HD. Can anybody give me any suggestions?
    Thanks in advance,
    Larry

    I found an solution.
    Uninstalling AirParrot as well as the two offending AirParrotDriver.kext and APExtFramebuffer.kext files in System>Library>Extensions was the fix. All problems disappeared.

Maybe you are looking for

  • Help me to do this recusively

    I am trying to write a function called parens that will allow me to do this. Say I have a simple string " (a+(x) * (6 + 14) - q7) then if I call parens it will produce this result (x) (6+14) (a + (x) * (6 + 14) - q7) the input that I get for this met

  • Table goes out of alignment in text box

    I have created a very simple table in InDesign CS5 on Windows 7, like this: However when you start typing into a cell, it goes like this: To fix it up you have to make the text box slightly bigger or smaller then resize back to what it's supposed to

  • Very slow query when specifying where clause

    Hi folks: I am using SAS with SQL Passthrough for Oracle, however that may be irrelevant to the problem. I have a query that I am subsetting based on a series of where clauses, and when I put the clauses into the query, it slows it down tremendously.

  • Failed to verify Authenticode signature on DLL msxmlsql.dll

    Hello, I got this error message. The server is experiencing issue of service broker suddenly stopping, so we are ruling out all errors at this point. Server is setup with HADR. Win Server 2008 R2 Ent SP1 SQL 2012 11.0.3349 Ent Log Name:      Applicat

  • How to run a vi in a particular pc alone

    hi  i m searching for solution, to run a vi in a particular pc. And it should not run in anyother pc without the server permission. Does anyone have idea to this problem?