ITunes DVD burn settings

I'm about to take some of my own advice and see about burning my purchased music to a DVD-R of some stripe. That way I'll have an external backup even if my backup drives and computer get zorched by a lightning strike or a massive surge.
Here is the question. When buring a data CD or DVD directly from iTunes, does iTunes finish the disk even if it isn't full? Is there an option to burn just a session and finish the entire disk later?
Anybody know?
Doc

After the last song is burned iTunes immediatly finishes the (data)disk.
Sorry, no multi-session option.
M

Similar Messages

Best DVD Burning Settings?

Using Toast 7 and .img file, what is the best DVD media to use, and what are the best Toast 7 settings to use in burning a DVD?
Thanks,
Stuart

Use 'minus' media and write at a low speed (2x - but not higher than 4x).

ITunes & DVD Burning

I have purchased some "TV Movies" and downloaded them onto my MacPro. As I would like to watch them on my MacBookPro as well, I burnt the Dvd's with the iTunes built in program. So far so good, they show up ok on the MacPro Superdrive....but when I load the disc into the MacBookPro it is not recognised at all.
However.....if I start up Parallels on my MBPro and run the Windows version of iTunes (same version) the disc and movies do show up!!!
Any ideas please? Thanks.

If talking about purchased videos: Sorry - no way to do so due to DRM: Not through iTunes nor through any 3rd party application.

ITunes DVD Burn Issue

I receive the following: The attempt to burn a disc failed. The device failed to responde properly, unable to recover or retry.
I have downloaded all of the upgrades; I have checked that the device is supported in the system profiler; but I am unable to burn anything (photos, itunes etc).
How do I fix this?

Is there an additional driver that came with your LaCie? You might try to remove it, as OS X 10.4.2 should not need such a driver.
You might try to install Patchburn from http://www.patchburn.de instead.
Also worth a try: Delete in .User/yourusername/Library/Preferences
com.apple.digihub.playlist
com.apple.systempreferences.plist
After that switch off and on again your Mac

KEYNOTE TO DVD BURN SETTINGS FOR HIGHEST QUALITY ???

KEYNOTE SLIDE PRESENTATION W/ PHOTOS AND MUSIC WHAT IS THE BEST WAY... SETTINGS...
EXPORT OR SEND TO ? DETAILS TO PRESENT ON HI DEF SCREEN IN DVD FORMAT?

KEYNOTE SLIDE PRESENTATION W/ PHOTOS AND MUSIC WHAT IS THE BEST WAY... SETTINGS...
EXPORT OR SEND TO ? DETAILS TO PRESENT ON HI DEF SCREEN IN DVD FORMAT?

ITunes Backup trying to burn to wrong DVD burner

My MacBook Pro has a built-in DVD writer (which I have not had success using lately) and I also just purchased a Samsung SE-S084D External USB DVD Writer, because of my trouble burning DVDs with the internal drive.
I've got the Samsung burner connected and when I insert a blank disc, I get the pop-up from the OS that asks if I want to launch Finder, iTunes, etc. I can burn files to the drive from Finder (at 6X) just fine. iTunes however...
I have iTunes 10.1.1 (4). I go to File | Library | Back Up to Disc... In the window that comes up, it lets me choose one of the two DVD burners:
MATSHITA DVD-R UJ-857E
TSSTcorp CDDVDW SE-S084D
Clearly the first is the internal drive and the second is the Samsung USB external drive.
If I set it to the second one (the external drive), then iTunes gets stuck on "Please insert a blank disc...". I've tried ejecting and reinserting the disc, inserting the disc before starting iTunes, etc. Nothing works. Then on a whim I wondered if it was really using the drive that I told it to use. So I tried to do another burn to the EXTERNAL drive and when it said "Please insert a blank disc...", I put a disc in the INTERNAL drive. Voila! The message went away and iTunes proceeded to attempt to burn using the internal drive, which failed in a minute or two (which is the reason why I bought the external DVD writer in the first place!).
I tried many times and even though I choose "TSSTcorp CDDVDW SE-S084D", iTunes keeps trying to use the internal drive. Then I wondered if iTunes perhaps was displaying the wrong labels for the drives, so I tried to instead selecting "MATSHITA DVD-R UJ-857E", hoping that iTunes would use the external drive. No dice. iTunes still used the internal drive. By the way, the Samsung shipped with the TS00 version of the firmware - I upgraded the firmware to version TS01 (the latest), but that didn't help with my iTunes problem.
So it seems to me that I have stumbled on a bug where iTunes DVD burning doesn't work properly on a system with multiple DVD writers. In the GUI, it offers a choice of DVD writers, but this seems to have no effect.
Can anyone verify this?
I suppose if I get desperate, I could try opening up the MacBook Pro and disconnecting the cable from the internal drive, on the hope that iTunes would then only one see DVD writer and would hopefully not get confused. That's pretty extreme though and I'd rather not open up the computer just to test out a theory.
Known issue? Can anyone verify this? Any other ideas for a software method for convincing iTunes to use the external DVD writer?
Thanks in advance!
-Marc

I use the console to watch for errors when burning CDs. The console can be found in the utilities directory under applications. I also use the system profiler to see if it reports the second drive seeing the empty disk, however your comment about being able to write playlist info says its seeing it and writing to the usb disk.
It maybe that iTunes doesn't support the USB DVD drive you have, or try moving to another USB port, preferable a high speed port, usb2. Again watch the console for messages being reported during the burn, buffer under or over runs, or read/write errors.
For the internal drive issue, either a bad or broken drive. One last thing to check is disk space, make sure it has more than 10% of free space left. If the drive is close to full, it could cause similar issues as you report.
Good luck

Since I installed Nero 2104 I get an error message when I try to start iTunes: registry settings changed probably due to other cd/dvd burning program please reinstall iTunes, which I've done using repair option but the problem persists...?

Since I installed Nero 2014 I get an error message when I start iTunes that registry settings for importing and burning cds/dvds have changed probably due to other burning software installed please reinstall iTunes, which I've done using 'repair' option, but the problem persists. I have been able to import cds to iTunes since I installed Nero, but it won't anymore. Does anyone recognize this problem and have a solution? Thanks for any help. Using Windows 7.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes
If you're still getting the error message (especially when you plug in the Touch), I'd check for a device filter confusion on the PC. (They can affect the connection of USB devices to a PC, as well as burning and importing CDs.) For that one, see:
iTunes for Windows: Troubleshooting CD issues caused by device filters

I get the following message when opening itunes: "the registry settings used by the itunes drivers for importing and burning cd's and dvd's are missing" how do I repair? downloading latest virsion of itunes doesn't work

I get the following message when opening itunes: "the registry settings used by the itunes drivers for importing and burning cd's and dvd's are missing. Downloading the latest version does no fix the problem

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

HT203242 I get this error when launching itunes "the registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing." I ahve reinstalled iTunes multiple times but the issue remains.....any suggestions?

I get this error when launching itunes "the registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing." I ahve reinstalled iTunes multiple times but the issue remains.....any suggestions?

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Sony DVD Burner and 350 mhz AGP not being recognised by iTunes

I managed to get a Sony DVD Burner for my friends Powermac g4 AGP, the sales assistant sais it would be comatible for macs....it installed fine and wa sable to read dvd's perfectly, when my friend went to burn a CD from iTunes it would not work as it seems the drive is not supported. I have tried finidng some drivers all over the sony website for it but to no avail. I don't suppose anyone has any experience with this brand of burner? Any help would be appreciated thanks.

As I recall, Sony's internal DVD burners are made by Lite-On, but as far as the G4 is concerned - the drive's firmware indicates a Sony product. A compatibilty problem for burning a disk occurs, when the CD/DVD drive is newer than the supporting profiles for Apple's Disk Burner software. Have you checked into "PatchBurn?" Other than that, your friend could purchase Roxio's "Toast," which has more user settings than Apple's software.

In itunes 10.6, when I click to burn a cd, it takes 10 minutes for the "Burn Settings" screen that allows me to choose which cd burner to use to be displayed. I have tried setting the UpperFilters to "GEARAspiWDM" and LowerFilters to null. Any suggestion

In itunes 10.6, when I click to burn a cd, it takes 10 minutes for the "Burn Settings" screen that allows me to choose which cd burner to use to be displayed. I have tried setting the UpperFilters to "GEARAspiWDM" and LowerFilters to null. Any suggestions?

Many thanks for the diagnostics.
Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
With that one, I'd start with solution 3 from the following document:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install

ITunes Seem to Have Suddenly Stopped Communicating With the CD/DVD Burner

Hello, I wonder if anybody can help - my itunes application seems to have suddenly stopped communicating with my laptop's cd/dvd burner
(Generic Name (E: H - T-S D D A S - 20N ATA Device)).
About 2 years ago, I have experienced a similar problem, but was able to resolve it by downloading 64-bit compatible GEAR drivers to my system. However, the problem has re-appeared when I have updated to iTunes Version 10.1. Funny enough, the cd/dvd burner started getting recognized again when I updated to iTunes Version 10.2, but halfway through me burning a large playlist to multiple cds has suddenly stopped recognizing the cd/dvd burner again, and has never "resolved itself" ever since.
I have tried multiple approaches to solving this issue, including completely re-installing itunes software and completely re-installing GEAR drivers, but nothing works. I have even tried uninstalling GEAR drivers completely, as I read that it worked for someone on one of the similar forums, but that didn't work either.
My itunes diagnostics runs all the points of the cd/dvd drive check successfully, except for the last point (Can Not Read Audio CD). Here's what the diagnostics summary looks like:
Microsoft Windows Vista x64 x64 Home Premium Edition Service Pack 2 (Build 6002)
Hewlett-Packard HP Pavilion dv9700 Notebook PC
iTunes 10.2.1.1
QuickTime 7.6.9
FairPlay 1.11.16
Apple Application Support 1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.0.25
Apple Mobile Device Driver not found.
Bonjour 2.0.4.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 0016AB580A7B0C28
Current user is not an administrator.
The current local date and time is 2011-04-14 17:52:25.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 7150M / nForce 630M
** External Plug-ins Information **
No external plug-ins installed.
The drive F: Motorola MB810 Rev 0001 is a USB 2 device.
iPodService 10.2.1.1 (x64) is currently running.
iTunesHelper 10.2.1.1 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
** CD/DVD Drive Tests **
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: H-T-S DDA
S_-20N, Rev W_05
Audio CD in drive.
Found 1 songs on CD, playing time 255:08 on Audio CD.
Track 1, start time 00:02:00
Audio CD reading failed. Error Code: 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 0 0 0 0.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed succeeded.
The drive CDR speeds are: 3 9 16 24.
The drive CDRW speeds are: 3.
The drive DVDR speeds are: 3.
The drive DVDRW speeds are: 3.
Error Correction is turned on for importing audio CDs.
I have noticed that the diagnostics summary containes a suggestion to update firmware of my laptop's cd/dvd drive, but currently there are no such firmware updates available.
Another frustrating issue that I ran into was trying to convey this issue to Apple Technical Support via e-mail using the Express Lane for the troubleshooting issues. I really fail to understand why I am being asked for the "hardware serial number" when I'm clearly choosing the categories for "iTunes/CD-DVD Import Issues" which are software, not hardware, categories! This prevents me from being able to simply send the description of my problem to the correct Apple Support department, and does not let me do that even when I enter my itunes' Serial Number, which can be found in the diagnostics summary provided above.
Much Thanks to anyone who can provide any kind of helpful advice, even if it's just on how to be able to convey this problem to Apple Support via e-mail!

Okay ... checking something else:
Current user is not an administrator
Is that true? Or do you in fact have a Windows user account with full administrative rights?
(It's possible that a permission may have gone astray in your usual user account, which might be causing the burning issues.)

New DVD burner not working w/iTunes

Okay, I've been working on this and digging through these forums for awhile now. I'm still stumped. So here we go:
I had a new DVD burner installed. I'm using Nero software which works fine for DVD, data, etc. However, iTunes gives me the "disc burner or software not found" message if I try to burn a disc from iTunes.
I have completely uninstalled and reinstalled iTunes (yes, latest version) twice now. No go.
In edit>preferences>advanced>burning CD burner: still shows the old CD-RW.
iTunes will recognize and play prerecorded CDs and ask if I want to import them.
In help>diagnostics>CD/DVD drive tests, after putting in a prerecorded CD as requested: Optical drive detected IS the correct device (D: ASUS DRW-1814BL) BUT I get a red dot with "no audio CD found" yet the songs are showing in the device window (in actual iTunes behind the diagnostic window).
Diagnostics complete:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
ECS S746FX
iTunes 7.5.0.20
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Current user is an administrator.
The current local date and time is 2007-12-04 11:41:31.
Video Display Information:
RADEON 9600 SERIES
RADEON 9600 SERIES - Secondary
** CD/DVD Drive Tests **
UpperFilters: GEARAspiWDM (2.0.6.1),
Failed while scanning for CD / DVD drives, error 2510.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
D: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
I have uninstalled all virtual drive software, including Daemon Tools, PowerISO, and MagicDisc.
I have followed the article pointed out in an earlier thread involving editing the registry to remove 3rd party filters.
Okay... that's as much info as I can think of. Help?

Do you by any chance have Daemon tools? They are know to cause drive recongnition problems with this error number.
I intended to add this link just in case:
http://gearsoftware.com/wiki/index.php?title=SPTD_Drivers
Message was edited by: polydorus

ITunes 7.3 failed back up data DVD burn had error code 261(0x00000105).

Just bought a bunch of new songs and went to back them up in iTunes 7.3 and I keep getting error code 261(0x00000105).
Any ideas? Did not have this problem in prior versions. Brner works fine with other programs.
Thanks!
Home Brew Windows XP Pro

Keep getting the same error as well. Run cd/dvd diagnostics and it should tell you... "The last failed data CD or DVD burn had error code 261(0x00000105)".

ITunes 7.1 loses track of some registry files necessary for CD/DVD burning

Has anyone else seen this odd error message. I installed iTunes 7.1, then restarted my computer as instructed. When I rebooted and ran iTunes, I got an odd error message indicating that some registry files were missing and that this was likely because I had recently installed a CD/DVD burning program. The problem is that I haven't installed such a problem.
Now I believe I have found a solution: I ran the installation again, and when prompted I told the installer to repair iTunes. The message didn't come back after that, but does this mean that the issue was solved or simply that the message only shows the first two times or so after the installation? But, most of all, has anyone else seen this message?
HP Pavilion m7640n, AMD Athlon 64 X2 5000+ (2.6 GHz), 2 GB DDR2 PC2-4200 RAM Windows XP Pro 320 GB HDD, XP MCE 2005, will soon be running Windows Vista Home Premium Edition

I wonder if this Apple article on registry issues helps?
http://docs.info.apple.com/article.html?artnum=302976

ITunes DVD burn settings

Similar Messages

Maybe you are looking for