ITunes encountered an error during my last update. R6034. Error 7 (windows error 1114)

Runtime Error
R6034
An application has made an attemp to load the C runtime library incorrectly.
Please contact the applications support team for more information.
Upon clicking "OK" I get another message.
iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 1114)
What do I do? Tried reinstalling iTunes. That doesn't work.

Hello there, rockinrobin39.
The following Knowledge Base article addresses the very issue you're describing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

Error during OLAP AW UPDATE

Hi,
I am using AWM 11.1.0.7.0B and the DB 11.1.0.7.0
After every one or two days I am getting this error..Whenever I am maintaining the dimention I am getting the following error....
An error has occurred on the server
Error class: Express Failure
Server error descriptions:
INI: Error creating a definition manager, Generic at TxsOqConnection::generic<BuildProcess>
INI: XOQ-00703: Error executing OLAP DML command "(UPDATE OCDM.OCDM : ORA-37605: error during OLAP AW UPDATE
ORA-00600: internal error code, arguments: [xspggepGenPSErase01], [], [], [], [], [], [], [], [], [], [], []
)", Generic at TxsOqAWManager::executeCommand
at oracle.olapi.data.source.DataProvider.callGeneric(Unknown Source)
at oracle.olapi.data.source.DataProvider.callGeneric(Unknown Source)
at oracle.olapi.data.source.DataProvider.executeBuild(Unknown Source)
at oracle.olap.awm.wizard.awbuild.UBuildWizardHelper$1.construct(Unknown Source)
at oracle.olap.awm.ui.SwingWorker$2.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
For view data geting the error
BIB-9509 Oracle OLAP did not create cursor.
An error has occurred on the server
Error class: Express Failure
Server error descriptions:
DPR: Unable to create server cursor, Generic at TxsOqDefinitionManager::crtCurMgrs4
INI: XOQ-00703: Error executing OLAP DML command "(AW ATTACH OCDM.OCDM RO : ORA-34738: A severe problem has been detected. Analytic workspace operations have been disabled.
)", Generic at TxsOqAWManager::executeCommand
And when I am trying to detach or delete the AW it is giving the following error...
java.sql.SQLException: ORA-34738: A severe problem has been detected. Analytic workspace operations have been disabled.
ORA-06512: at "SYS.DBMS_AW", line 93
ORA-06512: at "SYS.DBMS_AW", line 180
ORA-06512: at line 1
at oracle.olap.awm.connection.AwAttachmentManager.detach(Unknown Source)
at oracle.olap.awm.connection.AwAttachmentManager$1DetachWorkspaceThread.run(Unknown Source)
Please help....
Thanks,
Devjit
Edited by: [email protected] on Jul 21, 2009 5:48 AM

Hi,
I am also facing similar issue in 11.1.7.0 production Database...
Error while trying to maintain a dimension :
An error has occurred on the server
Error class: Express Failure
Server error descriptions:
INI: Error creating a definition manager, Generic at TxsOqConnection::generic<BuildProcess>
INI: XOQ-00703: Error executing OLAP DML command "(UPDATE WCC_DPL_OWNER.WCC_OLAP : ORA-37605: error during OLAP AW UPDATE
ORA-00600: internal error code, arguments: [xspggepGenPSErase05], [], [], [], [], [], [], [], [], [], [], []
)", Generic at TxsOqAWManager::executeCommand
at oracle.olapi.data.source.DataProvider.callGeneric(Unknown Source)
at oracle.olapi.data.source.DataProvider.callGeneric(Unknown Source)
at oracle.olapi.data.source.DataProvider.executeBuild(Unknown Source)
at oracle.olap.awm.wizard.awbuild.UBuildWizardHelper$1.construct(Unknown Source)
at oracle.olap.awm.ui.SwingWorker$2.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Error while trying View Data of the particular dimension :
BIB-9509 Oracle OLAP did not create cursor.
An error has occurred on the server
Error class: Express Failure
Server error descriptions:
DPR: Unable to create server cursor, Generic at TxsOqDefinitionManager::crtCurMgrs4
INI: XOQ-00703: Error executing OLAP DML command "(AW ATTACH WCC_DPL_OWNER.WCC_OLAP RO : ORA-34738: A severe problem has been detected. Analytic workspace operations have been disabled.
)", Generic at TxsOqAWManager::executeCommand
Error which trying to detach the AW :
java.sql.SQLException: ORA-34738: A severe problem has been detected. Analytic workspace operations have been disabled.
ORA-06512: at "SYS.DBMS_AW", line 93
ORA-06512: at "SYS.DBMS_AW", line 180
ORA-06512: at line 1
at oracle.olap.awm.connection.AwAttachmentManager.detach(Unknown Source)
at oracle.olap.awm.connection.AwAttachmentManager$1DetachWorkspaceThread.run(Unknown Source)
As per Metalink Doc id : ID 779168.1, the AW has been corrupted . This is due to bug 7434725.
Is there any specific patch for this bug or has this problem being resolved in 11gR2 ?
Can someone please help !!!
Thanks

IDVD working till I installed 2TB ED. Keep getting message"There was an internal iDVD error during the last action. This is not a movie." Any help is appreciated.

iMovie message "There was an internal iDVD error during the last action. This is not a movie." comes up after trying to create a movie to burn to iDVD. Recently added a 2TB external drive to free up memory from HD. iDVD was working fine till the ED was added. Can't burn DVDs anymore. Any suggestions on how to fix the problem?

What folders did you move to the EHD? Any of the basic Home folders? What format is the EHD? It should be OS X Extended (journaled). Do you have any files that iDVD uses on the EHS, i.e. project files, media files?
OT

Itunes can't open since the last update : say APSDaemon.exe is missing?

I can't open itunes on my PC since the last update. Window appears with "APSDaemon.exe is missing". Where I can find this program ?

Hello AF2from,
The following article provides steps that can help get iTunes back up and running.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Allen

Having a constant error when downloading latest update for Illustrator CC, error message: Adobe Illustrator CC Latest Updates (December 2014) Installation failed. Error Code: U44M1P7

Having a constant error when downloading latest update for Illustrator CC, error message:
Adobe Illustrator CC Latest Updates (December 2014) Installation failed. Error Code: U44M1P7

U44.. update error http://forums.adobe.com/thread/1289956 may help
-more U44.. discussion http://forums.adobe.com/thread/1275963
-http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
-http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

When saving iDVD to disk image the following message appears: "Error during rendering/codification. There was an error during rendering/codification of menus/slide presentation. The recording process was canceled.

When saving iDVD to disk image the following message appears: "Error during rendering/codification. There was an error during rendering/codification of menus/slide presentation. The recording process was canceled.
What am I doing wrong?

Read and answer the questions posted by Bengt Wärleby in this thread: Cant burn my idvd project to...: Apple Support Communities
OT

My iPhone 4 was disconnected during ios 5 update - now i have error -50 showing and cannot get phone back on. Help!

during IOS5 update my phone was disconnected from itunes. i reconnected it and continued the update by clicking 'continue restore'. Itunes is now saying the the phone is updated to version 5 and appears to have fully synced. however, when i turned the phone back on i have the set-up screen and when i select to restore the phone through itunes i get a message with options to 'continue restore' or 'delete backup'. when i select 'continue restore' itunes then gives me an 'error -50' message and just syncs the phone but nothing seems to happen - the phone does not do anything.
Should i delete the back up and start over, or will that delete all my contacts?
Any help is much appreciated!

Everything is Sorted!
The release of iTunes 11.0.2 and iOS 6.1.2 for my iPhone 4, seems to have sorted everything. I can now sync music, films and photos between my MacBook and my phone.
I was dubious about blindly doing the updates but decided they couldn't really mess up any further functionality so I went for it and it's sorted now.
Look in to, and take the gamble, it's up to you.

ITunes doesn't work since the last update

Hi guys
since my last update of iTunes it doesn't work any more. I get this message that "CVImageBufferCreateColorSpaceFormAttachments" wasn't found in "CoreVideo.dll". Next message I get is then iTunes wasn't istalled correctly "Error 7 (Windows error 127)".
I reinstalled iTunes several times and the CoreVideo.dll isn't missing in my aple file. I looked on other Aple Discussions but they didn't helpt me...
Thanks for your help!
Kind regards

On Vista Home premium, uninstalling and reinstalling buth iTunes and Apple Applicatioon Support did NOT work for me.
What did work for me was manually copyting CoreVideo.dll from the Apple Application Support folder into my iTunes folders (actually, to both of them - under Program Files and Program Files (x86)) as per advice posted in a Windows forum, found after an hour or more of frustration and failure.
This appears to be a bug in the 10.1 installation scriptimng - what's going on?

[CS3] Is there a way to stop the modal alert on EVERY SINGLE ERROR during a bulk update?

I've inherited quite a mess I'll admit -- I've got ~ 8000 pages each with different dreamweaver templates with the entire site being in a varying state of disrepair. I need to perform a global change -- I'm thinking the way to go about this is to update the templates (thre are ~40 of them, not nested) and let the process run through. However, I've encountered difficulties.
After about ~2300 files loaded into the site cache, dreamweaver crashes -- there is no error, it's an unhandled exception.... it consistently crashes at this point. I'm not sure if this is a specific page causing the problem, or if it's that I'm trying to load 8K files into the site cache.... So anyway, with it crashing consistently trying to build the site cache, I basically press "stop" whenever it tries, and that seems to abort the building and the 'update pages' screen comes up and tries to update the files.
My next problem is that there are countless errors in each of these pages and templates -- ranging from the 'template not found' when an old or outdated file is referencing a template that has been deleted -- to various mismatched head or body tags. Of course, and this is probably the most annoying thing I've ever encountered, this bulk process that should run over 1000s of files without interaction seems to feel the need to give me a modal alert for every single error. The process stops until I press 'OK'
I'm talking update 5-10 files, error... hit 'return', another 5-10 files are processed, another alert, hit 'return' -- rinse and repeat. Oh, and I made the mistake one time of hitting 'return' one too many times -- oh yes, this will STOP the current update because default focus is on the 'Stop' button, for whatever reason. and if I want to get the rest of the files, I need to run it again -- from the start.
Is there a way to silence these errors? They're already showing up in the log, I wouldn't mind going through it once the entire site has been udpated to clean thing up ... but I'm updating quite literally thousands of pages here, I would wager that 1/3 of them have some form of an error on it... do I really need to press "OK" two thousand times to do a bulk update with this program?
Any tips from the pros?

This one might help.
Allow configuration of Automatic Updates in Windows 8 and Windows Server 2012
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

[SOLVED]Cannot run own program since last update : malloc.c:3096 error

Hi all,
It seems that due to a recent update a program that I am working on doesn't run any more.
It doesn't rely on any external libraries and compiles fine, but when it gets to a : "pointer = new class_object[4096];" it crashes with the error:
malloc.c:3096: sYSMALLOc: Assertion `(old_top == (((mbinptr) (((char *) &((av)->bins[((1) - 1) * 2])) - __builtin_offsetof (struct malloc_chunk, fd)))) && old_size == 0) || ((unsigned long) (old_size) >= (unsigned long)((((__builtin_offsetof (struct malloc_chunk, fd_nextsize))+((2 * (sizeof(size_t))) - 1)) & ~((2 * (sizeof(size_t))) - 1))) && ((old_top)->size & 0x1) && ((unsigned long)old_end & pagemask) == 0)' failed.
Aborted
I've done some searching but have been unable to find much other than this thread: http://bbs.archlinux.org/viewtopic.php?pid=654908 which leads me to believe that it might be a library version conflict. I am unsure how to debug this though. I also own an nvidia card running nvidia drivers, and the nvidia drivers were updated in the last update but I do not have the same file that the previous poster had a conflict with. I am also not sure how the nvidia drivers would cause problems as I'm not linking with OpenGL or any library other than the standard library.
Does anyone have any ideas?
Thanks!
Last edited by neutrix (2010-02-17 15:05:01)

Well this problem works both in debug and release builds. I've got the bug down to the individual line that it crashes at, I create an instance of a class like this:
Vec3 *vectorlist;
vectorlist = new Vec3[5012]; //CRASHES ON THIS LINE
Vec3 is a class that I've defined for 3D vectors. It doesn't do anything complicated or special, the constructor simply initializes the 3 components of the vector to 0. I am happy to post the full code (it isn't very complex) if someone else wants to try compiling it to see if it works on their computer.
I think the problem might not be in my code (considering it worked before the update), but instead might be some clash between library versions as in the thread that I linked to in my first post. I am not sure how to go about debugging a problem like this though.

Error during Java SPS Update (LM-TOOLS)

Hello,
I am currently upgrading SAP EHP 1 for SAP NetWeaver 7.0 from SPS06 to SPS14 and I get an error during LM-TOOLS component update.
Here is the error log:
14/03/17 14:24:31 - ***********************************************************
14/03/17 14:24:31 - Start updating EAR file...
14/03/17 14:24:31 - start-up mode is lazy
14/03/17 14:24:31 - EAR file updated successfully for 33ms.
14/03/17 14:24:31 - Start updating...
14/03/17 14:24:32 - EAR file uploaded to server for 42ms.
14/03/17 14:24:32 - ERROR: Not updated. Deploy Service returned ERROR:
                     java.rmi.RemoteException: Cannot deploy application sap.com/tc~sec~auth~spnego~wizard..
                     Reason: Clusterwide exception: Failed to deploy application sap.com/tc~sec~auth~spnego~wizard. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:
                      com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application sap.com/tc~sec~auth~spnego~wizard. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
                      at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:689)
                      at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1278)
                      at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:336)
                      at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
                      at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:137)
                      at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
                      at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
                      at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
                      at java.security.AccessController.doPrivileged(Native Method)
                      at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
                      at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
                     Caused by: com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application sap.com/tc~sec~auth~spnego~wizard. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
                      at com.sap.engine.services.webdynpro.WebDynproContainer.deploy(WebDynproContainer.java:1052)
                      at com.sap.engine.services.webdynpro.WebDynproContainer.makeUpdate(WebDynproContainer.java:1283)
                      at com.sap.engine.services.deploy.server.application.UpdateTransaction.makeComponents(UpdateTransaction.java:402)
                      at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:325)
                      at com.sap.engine.services.deploy.server.application.UpdateTransaction.begin(UpdateTransaction.java:166)
                      at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
                      at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
                      at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3241)
                      at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:677)
                      ... 10 more
                     For detailed information see the log file of the Deploy Service.
14/03/17 14:24:32 - ***********************************************************
Mar 17, 2014 2:24:32 PM Info: End of log messages of the target system.
Mar 17, 2014 2:24:32 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Mar 17, 2014 2:24:32 PM Error: Aborted: development component 'tc/sec/auth/spnego/wizard'/'sap.com'/'MAIN_NW701P13_C'/'4487597'/'0', grouped by software component 'LM-TOOLS'/'sap.com'/'MAIN_NW701P14_C'/'1000.7.01.14.0.20130801094512''/'0':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application sap.com/tc~sec~auth~spnego~wizard..
Reason: Clusterwide exception: Failed to deploy application sap.com/tc~sec~auth~spnego~wizard. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:
com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application sap.com/tc~sec~auth~spnego~wizard. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Mar 17, 2014 2:24:32 PM Info: Starting to save the repository
Mar 17, 2014 2:24:32 PM Info: Finished saving the repository for 193 ms.
Mar 17, 2014 2:24:32 PM Info: Starting: Update: Selected software component 'LM-TOOLS'/'sap.com'/'MAIN_NW701P14_C'/'1000.7.01.14.0.20130801094512''/'0' updates currently deployed software component 'LM-TOOLS'/'sap.com'/'MAIN_NW701P06_C'/'1000.7.01.6.0.20100108201135''/'0'.
Mar 17, 2014 2:24:32 PM Error: Aborted: software component 'LM-TOOLS'/'sap.com'/'MAIN_NW701P14_C'/'1000.7.01.14.0.20130801094512''/'0':
Failed deployment of SDAs:
development component 'tc/sec/auth/spnego/wizard'/'sap.com'/'MAIN_NW701P13_C'/'4487597'/'0' : aborted
Please, look at error logs above for more information!
Mar 17, 2014 2:24:32 PM Info: Starting to save the repository
Mar 17, 2014 2:24:33 PM Info: Finished saving the repository for 193 ms.
Mar 17, 2014 2:24:33 PM Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
Mar 17, 2014 2:24:33 PM Error: ---------------- At least one of the Deployments failed ---------------
Any help will be really appreciated.

Hi Johnny,
You need to undeploy the sap.com~spnego.cfg.wd component using SDM
Then retry the patching of LM-TOOL patching
Also follow the SAP Note
1643003 - Deployment of LM-TOOLS fails. Due to SPNego
With Regards
Ashutosh Chaturvedi

What do I do if my iphone gets stuck in recovery mode during a software update, due to an error occuring during the update?

I tried to update my iphone to the ios6 software, and during the update there was an error. My phone is currently stuck in recovery mode and it says the only solution is to restore the phone. I don't want to lose my media, contacts, etc. Do I have any other options?

Restore from a backup. You do have a backup, right?

Itunes update shows a windows error 7 saying it is missing file MSVCR80.dll

When I tried to update itunes in the itunes window a windows error came up as windows error 7 (window error 126) saying that the file MSVCR80.dll is missing and to download itunes. I have not been able to download itunes. Please help. Thanks

It happened to me the same. I solved it by restoring the system to an earlier phase of the upgrade. I hope it helps. Greetings from Gran Canaria.

[solved] Typing error sound - after last update

Hey guys, after last update every time i make some mistake while typing on console (rxvt) or at the file search on gnome, this weird sound comes out from pc speaker (some eletric bizzz). I can't find anything related to this, does anyone knows if that is some kind of configuration of Xorg or it's a bug?
Thanks for any help!
Last edited by gvescovi (2009-08-11 02:27:25)

Hello Gvescovi!
What does it mean for misstyping? The speaker gives sound in such a cases.
You can disable it:
http://wiki.archlinux.org/index.php/Dis … eaker_beep

TS5376 When I try to remove "Apple Mobile Device Support" I get a "Fatal error during installation" message. I have windows XP

The program will not start because MSVCR80.dll is missing. I am trying to unistall I tunes and then reinstall it because the latest upgrade did not work. I was able to remove "Itunes" and "apple Software update' but when I tried to remove "Apple mobile device support" I get a "fatal error during installation" message.

First try a repair install of Apple Mobile Device Support. If that goes through successfully, restart the PC and see if you can now uninstall Apple Mobile Device Support.
If the Repair install doesn't help, try using the fixit from the following Microsoft document to remove Apple Mobile Device Support:
Fix problems with programs that can't be installed or uninstalled

ITunes encountered an error during my last update. R6034. Error 7 (windows error 1114)

Similar Messages

Maybe you are looking for