Itunes entry point not found AVCFPlayerappliesMediaSelectionCriteriaAutomaticallyKey could not be located in the dynamic linnk library AVFoundationCF.dll
i have tried downloading the new itunes and everything went through but whenever i try to open itunes now i get the error message "The procedure entry point AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not be located in the dynamic link library AVFoundationCF.dll" i click ok and it pops up with another message saying that itunes was not downloaded properly and that i have to reinstall it...I've been looking through posts and online for hours and have tried repairing the apple application thingy that was in another post and that did not work. I don't want to uninstall itunes yet for fear of losing all of my music... can someone please help?
Hi,
I had to uninstall completely iTunes to resolve this problem and then install it. Please follow next hyperlink:
http://support.apple.com/kb/ht1925
Regards
Similar Messages
-
I downloaded the latest version of iTunes on my PC. Now I cannot open iTunes. I receive the following error message: "The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll" After pressing the "OK" button I receive a second error message: 'iTunes not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)". I've uninstalled iTunes and reinstalled to no avail. I've also eliminated the temp files (per suggestions on the trouble-shooting page) and no luck. I also tried system restore and that did not fix the problem. Any thougths on a repair?
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a -
I have Windows Vista computer. I am trying to upgrade my ITunes so can share files with other home computer. (Just got the new IPhone). I get this system error: The procedure entry point AVCFPlayerItemDurationChangedNotification could not be located in the dynamic link library AVFoundationCF.dll. Tries system restore and redownloaded...NOW Itunes will not even open. Can anyone help?
I uninstalled Apple Application Support, opened iTunesSetup with WinRar, and went down the list of msi's. AppleApplicationSupport was an install, all the others I did Repair. Did not have to reboot. Works okay now.
HTH -
I updated iTunes today (Windows). I restarted the computer but when I tried to launch, I get the message, ""The procedure entry point AVCFURLAssetInheritURIQueryComponentFromReferencingURIKey could not be located in the dynamic link library AVFoundationCF.dll".
I then did a new install of the latest iTunes version and got the same problem. No more iTunes.
HELP!!!For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Can't launch itunes due to the following error; The procedure entry point AVCFPlayerAppliesMediaSelectionCriteriaKey could not be located in the dynamic link library AVFoundationCF.dll.
Hey bcolden,
I would try uninstalling and reinstalling following the directions in here:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
This section in particular contains important information in the uninstall process:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Best,
Delgadoh -
Hello,
I dumped Itunes and QuikTime, tried to reload ( 4 Times) but keep getting the same error message.
ENTRY POINT NOT FOUND
The procedure entry point
AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not be located in the dynamic link library AVFoundationCF.dll.
HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Hi, Did you strip out all components, delete the named folders and reboot as in the second box of Troubleshooting issues with iTunes for Windows updates?
Checking on my computer here (Windows XP SP3 32 bit) I have one copy of iAdCore.dll in the main \Program Files\iTunes folder with the following properties:
Size 3,004 KB
Created 8th May 2014
Modified 8th May 2014
File Version 1.0.0.1
Product Version 1.0.0.1
I'll try to get a look at 64-bit system later to confirm the correct path.
tt2 -
Please help, cannot open itunes after uninstalling and reinstalling multiple times. Each time I receive the error message, "
The procedure point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVFoundationCF.dllDoes anyone have any suggestions? I restarted my PC and even tried to repair through the contol panel Uninsta; program. HELP!!!
-
I've tried running repair, uninstalling and reinstalling with several steps of install failing. ITunes ran fine prior to this upgrade (upgrade reminder for itunes and quicktime). Now I can't even start Itunes. Help.
I tried even restoring to a previous restore point on my pc and itunes still won't run as it says it's missing some files.AVFoundationCF.dll is part of Apple Application support, so unless you dealt with that repairs and reinstalls of iTunes will be ineffective.
The simplest thing to try is a repair of Apple application support.
Failing that, try a complete removal of all iTunes components using the method here:
http://support.apple.com/kb/HT1923
Don't forget the part about deleting files.
Download a fresh copy of the iTunes Installer, saving on your PC:
http://www.apple.com/itunes/download/
Then try reinstalling. In case security software is interfering with things, it's worth disconnecting from the Internet and disabling all security software during the install. -
I updated iTunes to the latest version and then I started getting this plus: iTunes was not installed correctly. Please reinstall. Error 7 (Windows error 127).
I tried reinstalling twice but I still get it, please help.Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes -
Hi
I have tried to research these problems I am getting, but have not been able to resolve them.
1st is the above DDE Server Windows iTunes.exe - entry point not found.
This only occurs when I try to start iTunes.
if I click ok , several times, iTunes will start but slowly.
If at any time I have to reboot my computer I get
iTunesHelper.exe - the procedure entry point asl_add_log_file could not be located in the dynamic link library ASL.dll
if I click 3 times OK it goes away.
To this end I have uninstalled iTunes and rebooted my machine then gone to iTunes web site and downloaded the latest version.
Installing it but still get the same errors on reboot and trying to run iTunes
Anyone any ideas please.
I have a self build PC it has an Intel core 2 quad Q6000 @ 2.40GHz
Ram 4.00GB
32bit OS
Windows 7 Ultimate SP1
Firewall - Zonealarm
Virus - Zonealarm
Thanks in advance
Steve
Message was edited by: Ybslik
Message was edited by: YbslikTaken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help! How do I remove this message every time I start up Windows? Would it help to
re-install Itunes and what version??Refer to this thread - https://discussions.apple.com/message/15685210#15685210
Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder" -
When I turn on my computer, an error message says "AppleSyncNotifier.exe-entry point not found. The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll" Cannot access itunes store, sync phone, etc. Two weeks ago did this and Apple support had me remove and reinstall iTunes. Doing it again. Help....
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.
Any answers how to fix it? All Im getting is error for the past 3 days!
-
when i open iTunes i get this message "iTunes: iTunes.exe - Entry Point Not Found" "The procedure entry point RefAudioFileWritePackets could not be located in the dynamic link library CoreAudioToolbox.dll." how do i fix this!
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes -
After installing the current version of iTunes, I get an AppleSyncNotifier.exe - Entry Point Not Found error. It says "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Kindly advice a process to get rid of this error, without losing my files on the iTunes.
Hi, I get the same error EVERY time iTunes updates.
I have to do the fix that is suggested in this topic (cut and paste the sqlite3.dll)
My Question:
Since this happens every time iTunes updates...... Do I have to remove SQlite3.dll from the "apple application support" folder....... so that the sqlite3.dll is only located in the "mobile device support" folder?????
It is getting really annoying to have to do the "cut and paste" fix every time iTunes updates.
Thank You,
Steve
Maybe you are looking for
-
How Exactly Are You 'Meant' To Log Onto BT Wifi?
Can someone tell me what exactly are you meant to use to log in to a hotspot ? Is it the BT ID/Password you access your online customer account with? Is it the @btinternet.com with the same or different password? Is it something else? We got BT In
-
Calendar not syncing in OS X 10.9 Mavericks
There seems to be an issue with syncing Google Calendar in OS X Mavericks. This is a completely clean install of the OS. I add my google account via the "Accounts" setting in System Preferences. I am using 2-step auth so I generate a password for thi
-
As we all know , this buit-in (ERROR_TYPE) indicates the type of error Forms has encountered. My question is: Could someone give me an example when ERROR_TYPE is ORA? Since now, all my errors had ERROR_TYPE=FRM. Even when there are database errors,li
-
Bsp table with editable columns
Hi, I want to create a table with some columns and include check box. Is it possible? I want to do this Table : Date Time Checkbox Checkbox Also how can i make the columns editable ? Thank you
-
Does Desktop Sorftware Version 7.1.0.41 support Outlook 2013?
Solved! Go to Solution.