ITunes error 13/14/1604, Can not restore my iPod Touch

Hello,
My iPod Touch crashed when using a app, so I did a hard reset.
After that it displayed the "Connect to iTunes thing"
The problems started that
So I connected it to iTunes, and it said that it couldn't make a connection because of my password.
There was no way to enter the password though, because of the connect to itunes picture.
I've put my iPod in DFU mode, and then tried to restore.
It gave a unknown error (14)
I asked on some forums and they gave me some tips, I tried them, got a 1604 error, tried to restore again, got a 13 error.
Now I keep getting an 14 error
I have no idea what to do now, I do not have any warrenty, since the water indicator is not the color it should be.
But that happened 4 months ago, and all the time it worked perfect
Can someone please help me out

Ok. I have spent the last 8 hours researching this problem and have the absolute 110% answer to everyone's problem with this issue.
Error 13 and 14 : Are checksum problems with the firmware image that is in the update package.
The update package is a .ipsw (IPod or IPhone SoftWare). This file is actually just a .zip renamed .ipsw.
The error is caused by a failure to download a crc-free version of the file. Not really sure why there are so many crc problems with the iphone updates, but Apple does not check the integrity of the update package before wiping your current version of IPhone software and that is why all IPhones that start an update with a bad update package end up in recovery mode. These errors are NOT related to the iTunes installation, antivirus software, or firewalls.
Recommendation : use a program like "Object Fix" (Freeware) to verify the integrity of the file prior to commencing with any new updates. You will have to keep trying to download it until you get a error free file. Once you have a CRC error free file this problem will go away. (I thought TCP/IP helped get rid of CRC errors.)
I had another problem and that was...
Error 1603 and 1604 : These are USB driver connectivity problems.
Recommendation : FULLY uninstall and re-install itunes software as stated in the Apple support documentation. Be sure to reboot between each step and these problems should clear themselves up. In addition, firewalls and anti-virus software may cause these errors as well.
Finally, shame on apple for not properly documenting their software so that end users do not have to decrypt their error messages with no true support to solve the issues. These are problems that enough people have had that there should be specific documentation on these problems.

Similar Messages

  • I can not restore my Ipod touch keep getting a 1611 code

    Need help ..can not restore my Ipod touch I keep getting a code 1611

    If you are using a Windows based computer, disable a/v software and turn off the Firewall.
    Disable antivirus software
    Turn Windows Firewall on or off

  • I can not restore the ipod touch 4th getting an error 2003

    I tryed to sync my ipod touch 4 Gen. and for some reason I got An ipod has been detected,but it could not be identified properly. please disconnect and reconnect the ipod then try again, I did that 3 times then I got I need to Restore it back factory settings.
    Now I am getting the ipod could not be restored. An unknown error occurred (2003) what should I be doing I did check for updates for the computer got some and then did a restart, still have this problem and I can't use my ipod touch at this point.

    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you're using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that doesn't resolve the issue, try the USB issue-resolution steps listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
    The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Can not restore my ipod touch 4 !!!!

    I was trying to u upgrade my ipod to ios 5 but when I finised upgrading , I was not able to restore my ipod back.I tried to look up youtube videos and looked of in internet and tried to work it out but nothing worked out. What should I do, can anyone help me with it???

    I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
    Identifying iPod models
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

  • I can not restore my iPod Touch 3rd

    Hi, I am trying to restore my Ipod Touch 3rd, but when the restoration is about 99% it stops and no more finish, someone may help me?
    Message was edited by: xitis

    Welcome to the discussions,
    did you make sure your security software does not block access to the Apple servers during the restore process.
    http://support.apple.com/kb/TS3125

  • Can not Restore my Ipod Touch

    I was trying to get my grandson's Ipod to sync on his movies and it would respond with a device timed out message. Thinking that a restore would help the situation I attemted to do a restore. I have wiped his Ipod (I'm not very popular at the moment) and I getan error message (unknown error 2003) I have tried a different USB port and it just about worked once. Since then I have updated my intel USB drivers and still no resotre. What is a 2003 error?

    however when I created a new user account and redownloaded the restore software a restore began but did not finish even though I let it run for 3 hours.
    Hmmmm. Just checking something else quickly ... by any chance, are you running Eset's Nod32 antivirus on the PC? (It's been associated with some similar sorts of grief when updating iPod Touchs recently.)

  • How can i restore my ipod touch 4g (?) without passcode or itunes

    Hi and thank you for helping as this is urgent.
    I forgot my passcode for my iPod, and guessed it to many times so it got disabled.
    The problem is I don't have iTunes and can't get it on my laptop, but need to restore my device. Right now on the screen it has a photo of a USB cord, an arrow, and the iTunes symbol. So, how can I restore my iPod touch without my passcode or iTunes?
    Thank you SO much.

    Right now you can't without a computer. Once you get to a computer you can restore it using DFU mode.

  • How to restore ios on iphone 4s? when I connecting itune after extracting it sows can not restore. error (21). how to solve this problem?

    how to restore ios on iphone 4s? when I connecting itune after extracting it sows can not restore. error (21). how to solve this problem?

    how to restore:
    http://support.apple.com/kb/HT1414
    error code 21 fix
    http://support.apple.com/kb/TS3694#error1015

  • TS1372 I replaced the hard drive, motherboard, and battery but now can not restore my Ipod 5th gen?  Error code 1416, any help?

    I replaced the hard drive, motherboard, and battery but now can not restore my Ipod 5th gen?  Error code 1416, any help?

    When I did a Google search on "1416 error ipod 5th," there is some discussion that the earlier version of the logic board only accepted 30 and 60 GB drives (or words to that effect), but the later "5.5" version did allow larger capacity drives.  If that info is true, the question is, do you have a compatible combination of logic board and hard drive?

  • HT1212 my itunes says it can not sync my ipod touch key in password on the device but my ipod touch says ipod disabled connect to itunes and doesnt give a option for my password how do I unlock my ipod

    my itunes says it can not sync my ipod touch key in password on the device but my ipod touch says ipod disabled connect to itunes and doesnt give a option for my password how do I unlock my ipod

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • I can not restore my ipod

    I can not restore my ipod

    i cant restore it because my brothers friend changed the password and it locked me out....
    is there anyway to get around that?

  • Please how can I restore my ipod touch 2g from a firmware that I own already on my computer and without any time need to download via itunes

    please how can I restore my ipod touch 2g from a firmware that I own already on my computer and without any time need to download via itunes

    You should probably disable the autosync functionality first by going to Edit -> Preferences, clicking the Devices tab, and enabilng the prevent iPods,iPhones, and iPads from automatically syncing option.
    Next, authorize the new computer with your iTunes Account.  In iTunes, choose Store -> Authorize This Computer and enter in the correct credentials.
    If possible, either copy a backup file from your old computer to your new one or create a new backup of your iPod in iTunes before letting it sync.  To do this, right->click on your iPod Touch from under the Devices section in the left hand pane of iTunes and choose Backup. You might also want to take a look at this article to see what it all included in the backup.
    http://support.apple.com/kb/ht1766
    Now onto synced content such as music, videos, photos, etc.  For iTunes purchases you can copy them back into iTunes by choosing File -> Transfer Purchases.  For all other nonpurchased iTunes content, see this older post from another forum member Zevoneer covering different software availbable to assist you with this task.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    Once the backup has been made and all other synced content such as music, videos, and photos are back in your iTunes library, restore your iPod from that backup you made earlier.  Here is more on backing up and restoring your iPod.
    http://support.apple.com/kb/ht1414
    B-rock

  • I can not get my ipod touch to regiter in my itunes or my computer?

    I can not get my ipod touch to regiter in my itunes or my computer?

    Have you worked through all of the troubleshooting in this Apple support document one at a time and very carefully?
    http://support.apple.com/kb/TS1538
    B-rock

  • I can't restore my ipod touch

    I can't restore my ipod touch, it says: error 21

    Use the following steps to place your device into recovery mode. If the device is already in recovery mode, you can proceed immediately to step 6.
    Disconnect the USB cable from the iPhone or iPod touch, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the the iPhone or iPod touch to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPhone. When you reconnect the USB cable to iPhone, the device should power on.
    Note: If you see the screen pictured below, let the device charge for at least ten minutes to ensure the battery has some charge and then start with step 2 again.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button:
    If necessary, open iTunes. You should see the following "recovery mode" alert:
    Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.

  • HT1212 How can i restor my ipod touch? I forgott my password to...

    How can i restor my ipod touch? I forgott my password to...

    Connect the iOS device to your computer and restore via iTunes. Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

Maybe you are looking for

  • Can I generate pulse trains on more than one counter output at the same time?

    I have a PCI 6601 card with a BNC 2121 to connect the signals to two devices. The card is used as a trigger for both devices and I want to be able to generate pulse trains on two output channels at the same time, with a time delay between the two. Ho

  • Office 2013 Home and Business License Compatability with Windows Server 2012 R2

    Are there any license issues with installing Office 2013 Home and Business on Server 2012 R2 operating system?  I am having inconsistent issues installing this software on a server running this operating system.  The Office software is not being accc

  • Inserting multiple pages/files into a signal pdf in chronological order Acrobat 8

    I am trying to create a single pdf document from multiple individual pdf files using Acrobat 8. The individual files are saved chronologically, however when I insert all of the files at once (document->insert pages->[select multiple files]) the are i

  • Query Takes Longer time as the Data Increases.

    Hi , We have one of the below Query which takes around 4 to 5 minutes to retrieve the data and this appears to be very slow as the data grows. DB Version=10.2.0.4 OS=Solaris 10 tst_trd_owner@MIFEX3> explain plan for select * from TIBEX_OrderBook as o

  • Preferred inspection type

    in qm view of mtrl master, there is one indicator "preferred inspection type" which is used to give precedence to the insp type for which this indicator is set over the default setting in SPRO (variant 01).this is what i know @ it. but my que is if i