ITunes error -200 unable to open

Hi.
Since today, I have throubles using Itunes (latest version) :
When I try to open it, it says :
I checked a few forums in vain... I tried to reinstall it... in vain...
For information, the concerned machine is a macbookpro13" 10.7.1
Please help !!!

Try here error 200  >  iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime

Similar Messages

  • Error (-200) // unable to open iTunes

    I have encountered an error trying to open itunes and I cannot find any support on the apple site. The error is (-200) and it prevents me from openning the application altogether.
    I have tried updating the software, deleting the application and re-installing, deleting the prefs, running disk utility (repairing permissions) – all to no avail.
    Help anyone...?
    eMac G4 1ghz   Mac OS X (10.2.x)  

    Try here error 200  >  iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime

  • N79 (Error message :Unable to open .File type not ...

    Dear nokia service manager,,
    Iam sivakumar using the nokia N79 handset.Iam getting the message like this (Error message :Unable to open .File type not supported)when i was trying to open the video file shooted by some other camera.I have tried changing the format of the file..but no use ..i dont get ant suitable software converter in the internet.So kindly look into this matter as i need this very uregently...
    hope its a mandatory feature as laptop and mobile interface are simple task nowadays in mobile...
    pls reply me..its very urgent...thanku..

    You could try Videora (http://www.videora.com/) - the downside here is that they have specific versions for specific phones, and sometimes it will makea file that plays perfectly in the desired phone but can't be shared to other models. The don't show a version for the N79, but try the N96 one because the N96 is the most similar OS to yours that they offer.

  • ERROR Message "UNABLE TO OPEN" and "E_IO_Cannot_Open"

    Trying to download 6 ebooks from Hive and I can download the acsm file but when I click that I get an error message "Unable To Open" and "E_IO_Cannot Open." The computer is authorised and uses Win 7 with ADE 3.  I tried ADE 4 but no better.  I have an older PC using Vista and ADE 2 and that will download okay but it is constantly being used so it is not convenient.  Does anybody know what's wrong?  Thanks.

    Hello,
    To try to help you, please, could you give some more informations ?
    - the operating system (XP/Vista), the edition ( Pro/Home...) and the service pack
    - usually, the installer installs the both files in C:\Program Files\Microsoft Sql Server\Samples. Is there any change in the location or have you moved the both files ?
    - could you check with the files explorer , that the 2 files are read-write and not read only( find one file, right-click on it, properties and in the 1st tabpage, you should see a checkbox read-only ( if checked , unchecke it ) ?
    - have you Sql Server Management Studio Express Edition ( at least SP1 ) ?
    If no, download it and use it to attach
    in the object explorer,
    click on your instance to expand it
    right click on databases
    in the contextual menu, click on attach
    in the new form,click on add
    you arrive on a second form : find your file , click on it, and OK
    it's the simplest way to attach ( the sp_-attach_db is complicated to type )
    the error messages are sometimes more clear in SSMSEE than in Sqlcmd
    Try also to attach ( thru SSMSEE or Sqlcmd but in using the windows authentification )
    NB: i hope that you are not trying to attach AdventureWorks on a remote instance and on a remote computer ( it would explain access denied )
    We are waiting for your feedback to try to help you more efficiently
    Have a nice day

  • One more solution for Silent Monitoring Windows 7 64-Bit - ERROR VOIP2037 Unable to open the NIC adapter for sniffing.

    Hi,
    we are using UCCX 8.5 SU3.
    After replacing the actual agent workstations with Windows 7 64-bit we had to face problems with the silent monitoring. (no sound at all and in the CSD the usual error popup "Silent Monitor-Session failed...").
    In the CAD logfile I found the errorcode. "ERROR VOIP2037 Unable to open the NIC adapter for sniffing. Please reconfigure the installation."
    After investigating the logfiles, starting postinstall.exe a hundred times and reading the Configuring and Troubleshooting VoIP Monitoring Guide.
    I just learnt about the wonderful tool nicq.exe.
    And so i found out that the driver spcd.sys wasn't installed.
    Check in the registry for "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SPCD"
    It seems to me that the "Cisco Supervisor Desktop.msi" never installs the driver one a Windows 7 64-bit.
    After starting the NICQ.EXE as administrator the driver is being installed.
    Test 1: Check Driver Status
    Driver not installed. Attempting to install it...
    Driver has now been successfully installed.
    SPCD Driver service is not running. Attempting to start it...
    SPCD Driver service is now running.
    Test 1: SUCCESS
    And after that the silent monitoring works again like a charm.
    Maybe that info help someone.
    kind regards, sebastian

    Excellent information, this has been driving me crazy for a while now.  Once i saw this info I was able to get it resolved rather quickly.
    +5 for you, (I tried to click it above but it would not let me.)

  • Mi mac boock pro no arranca y aparece una pantalla gris y una rueda girando sin cargar cuando entro con command V aparece este error BootCacheControl: Unable to open BootCacheControl: Unable to open /var/db/BootCache.playlist: 2 No such file or directory

    Hola atodos/as. Necesito ayuda.
    Mi mac boock pro no arranca y aparece una pantalla gris y una rueda girando sin cargar cuando entro con command V aparece este error BootCacheControl: Unable to open BootCacheControl: Unable to open /var/db/BootCache.playlist: 2 No such file or directory

  • I can't run visa interactive control window. ERROR MESSAGE: "Unable to open session "ASrl::INSTR" Status name VI_ERROR-RSRC BUSY Visa cannot curently access this resource.

    I cant run tds220 (driver for oscilloscope).
    Error message:
    VISA: (Hex 0xBFFF000E) The given session or object reference is invalid.
    Furthermore
    I cant run Visa INteractive control.
    Error message:
    "Unable to open session to "ASRL1::INSTR" Return value 0xBFFF0072 Status name VI-ERROE-RSRC-BUSY . VISA csnnot currently access this resource."
    Then change ports, this message appears for another port.
    Thanks for answer.
    Gita

    The port is open by another resource. You note that you should also get an error if you try to access the port in hyperterminal. Try rebooting your computer and the first thing you try is opening a VISA session with Visa Interactive control(VISAIC).
    If that fails, then you have a driver accessing your ports.
    If it works then it was just two applications that were trying to access your port (LabVIEW and VISAIC are seperate apps even thought they both may be using VISA.)
    Closing VISA sessions:
    LabVIEW will only *automatically* close VISA sessions if you have this option set: Tools>>options>>Automatically close VISA sessions.
    Otherwise you need to explicitly call a Visa close on the resource.

  • Output Designer 5.7 Errors - Error 1804 Unable to open configuration file

    Hi...Receiving error messages on accessing newly installed Output Designer 5.7.   Installed on new Win7 laptop.
    Error # 5903 -  You must select a Printer before saving.
    Error # 1804 - Unable to open configuration file "....\Config\PDF.ICF"
    The last error, Error # 1804, closes out the application.   File does not exist within the path.  Tried uninstalling and reinstalling with the same result.  
    Any help would be greatly appreciated!
    Thanks,
    Elena.

    Hi Elena
    This is most likely caused by missing admin rights on Win 7. I have seen this problem within my company.
    When installing Adobe Output Designer it will be placed in %ProgramFiles% which is your C:\Program Files folder.
    In subfolder C:\Program Files\Adobe\Output Designer 5.7\Config there are many configuration files that controls your printer drivers (Presentment targets). Dependent on what user type you are in Win 7 you might not have write access to files in this folder. When you cannot write to this folder you cannot make changes to your printer drivers or install new ones and you are pretty much stuck.
    Solution: Create folder C:\MyPrograms and install Adobe Output Designer here.
    Ståle

  • [SQLSTATE 22001] (Error 8152)Unable to open Step output file.

    Hi,
    I have configured the backups from our SQL Server instance to tape directly with out storing in the local drive, so that the disk space allocated for storing the backups in the local drive is saved. 
    but i end up with the below error.
    Executed as user: CORP\devsqlservice. select       DATABASE_NAME   = db_name(sd.database_id)      from       sys.databases sd      where         -- ONLINE    
      sd.state = 0        and sd.is_read_only = 0      group by sd.database_id      order by 1 [SQLSTATE 01000] (Message 0)  String or binary data would be truncated. [SQLSTATE 22001] (Error 8152)Unable
    to open Step output file.  The step failed.
    I am clueless , why i face this error, Do any one of you face such problems in backup (scheduled backups) job. 
    hemadri

    Hi Hemadribabu,
    >>”string or binary data would be truncated”
    As my research, the error above could occur in the case of passing string or binary data, whose length is larger than received object. So I recommend you to run the Transact-SQL script in SQL Server query window to check if this kind of issue exists, or
    you can post your entire script for further analysis.
    >> “unable to open step output file”
    In addition, as for the error above, this issue can be caused by two reasons below.
    1. The path of the output file is invalid. To fix the issue, please follow the steps below.
        a. Double click on the SQL Agent job.
        b. Switch to Steps tab, and click Edit.
        c. Click Advanced option.
        d. Change the path under Output file or delete the path. For a UNC path, you can 
    map a network drive and use the network drive instead.
    2. Your account doesn’t have access to the folder. Transact-SQL job step runs as the owner of the job step, or as the SQL Server Agent service account. So please check the type of the job step and the account which your job step runs as, and make sure that
    it has access to the folder. For more information about the process, please review the similar thread:
    https://social.msdn.microsoft.com/forums/sqlserver/en-US/7610b484-98b7-42dc-816f-dbc884e84c6d/backup-database-permission-problem   
    Regards,
    Michelle Li

  • LOAD ALIAS ERROR - 1002000 - Unable to Open Ascii File

    LOAD ALIAS ERROR - 1002000 - Unable to Open Ascii File
    Edited by: sj0609 on Nov 23, 2011 11:18 AM

    Just off the top of my head, have you tried doubling up the backslashes?
    I have had problems getting an ASO alternate alias table loaded from MaxL at all (back in v9) but I didn't get the same error you do.

  • Numbers error msg: "Unable to open ' .' Unknown file type."

    I last updated this doc 4 days ago, saving it every time I update it. I use it to track my children's school hours throughout the year. I have since restarted my Mac. I went to open this file today, and am getting the error message, "Unable to open ' (name of file)' Unknown file type.
    When I search for the doc under the spotlight, the name of it appears & it is listed as a Numbers doc, but I can't open it.
    Any ideas for a work around? I haven't backed it up in several weeks, so I'll be very sad if I can't retrieve it at all!
    Thanks for your help.

    Have a look here http://www.dmxzone.com/go/16740/clearing-dreamweaver-s-cache
    PS: Error 2 u 2

  • [Compiler] Error #1063: Unable to open file: /alchemy-darwin-v0.5a/avm2-libc/lib/asmachine.abc

    Can anyone give input on receiving this error when compiling?  I've come across it a few times.  The current project is compiling libjpg from www.ijg.org/
    [Compiler] Error #1063: Unable to open file: /projects/zaalabs/alchemy-darwin-v0.5a/avm2-libc/lib/asmachine.abc.
    There is no trace of this file, however within the achacks/gcc script there is a line:
    $machimp="$libc/lib/asmachine.abc";
    Referencing this file.  Is this something that wasn't released as part of the 0.5a?  Is there a workaround?
    Anyone had success with a workaround, or anyone find a magical copy of asmachine.abc?
    Aaron

    EDIT: found the solution here: http://forums.adobe.com/thread/25449

  • Unable to open iTunes, Error (-200)

    I've never had any trouble with iTunes or my iPod before...until after I updated RealPlayer and Quicktime last night. This morning I got the error message (-200) when I tried to open iTunes. I suspect one of those updates messed with iTunes but don't know how to fix it. Any ideas out there?
    iBook G4   Mac OS X (10.3.9)  
    iBook G4   Mac OS X (10.3.9)  

    Try here error 200  >  iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime

  • My ITunes has error (-200) and cannot open

    I tried to open my iTunes and got a notice saying it couldn't be opened because of error -200.  Does anyone know what this means and how I can fix this issue?

    Heyy,
    I do (:
    You need to update it or uninstall it and re-instal it.

  • ITunes error -200

    I cannot start iTunes. Every time I attempt to start it up I receive an" unknown error (-200)". Any ideas.?
    I reinstalled iTUnes 10 and deleted plists. Still the same problem.

    I'm dealing with this error today. I forgot to plug in my Macbook and the computer died. Every time my computer is turned off any other way than asking for a restart/shut down (ie out of power, pushing the power button for 3 seconds), I get the multi-language error at startup. I have to keep trying combinations of using the install disk, not using the disc, holding "d" or option, until finally it boots, I login, and the error screen doesn't show up.
    Today is the first time the sound hasn't worked for anything other than the startup chime. I don't hear the volume up and down sound, iTunes won't open, and I can't hear online videos and sounds. I was able to open Garageband, and I loaded a guitar lesson, but I couldn't hear the guy talking.
    If the audio/logic board was fried, how would I be able to hear the startup chime?
    There has to be a easy way to fix this.
    Message was edited by: blastrx1

Maybe you are looking for