ITunes error 206

i can't download apps on my pc, iTunes  return error- 206. Try later.   Someone can help me?

I bought SignalScope off iTunes on my PC, and it didn't appear in my Apps. iTunes keeps telling me to check for purchases, at which point I get the same -206 error.
I also bought Lonely Planet German Phrasebook from the App store on my iPhone, it seemed to download ok but the iPhone crashed and reset during installation. I can't download it again or get the thing to work on my phone. Again I end up checking for purchases and getting the -206 error.
Please fix this or tell us how we're going to get the Apps we paid for!

Similar Messages

  • Itunes error 206 always

    Hi i always get this error when trying to download programs from the itunes store Colombia.
    I have the itunes version 11.1.2.32.

    Some people are a bit skeptical about downloading new updates. Their software works fine but once they upgrade then everything goes straight to **** lol. Sometimes I say "If it ain't broken then don't fix it". But you needed that upgrade in this case.

  • Error 206, cannot search for downloads

    I purchased an album in Itunes but when I try to download I get the message 'unable to search for downloads, unknown error 206. I can donwload apps without a problem. I contacted apple but they cannot help me. I switched of my firewall but this did not help.  Anyone has a fix?

    Both FIND() and SEARCH() should find the "@" in PowerPivot.
    I have done it many times.
    You probably have one row in your data set that doesn't contain "@".  That will cause the error you describe and if one row in a Calculated Column causes an error, every row has an error if you do nothing to account for it.
    Try wrapping your formula in an IFERROR([Your Formula], BLANK()).
    This should allow it to run successfully on valid rows and will show a blank on any rows that are causing problems.
    Once you identify the problem row (or rows) you can make a decision about how to deal with it.

  • TS1424 error -206, ¿Qué hacer?

    Al descargar la temporada 2 de revenge en el capitulo de 19.Identity, el archivo tiene un error me envia el error -206,
    ¿Cómo reportar a apple este tipo de problemas? sin tener que estar comunicandote  a la linea de soporte que sóo atienden de lunes a viernes

    Try the following user tip:
    iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes

  • Disk Utility error -206

    I am building a restorable image of 10.4.9 - or rather, trying to build an image, as I just ran into error -206 for the 2nd time.
    I add stuff to my source in logical groups, then make and test an image. The error occurs at the end of a block restore, when Disk Utility is comparing checksums (running in dutch, so this may not be the wording in english). There is no error message, aside from the number. The target volume is unmountable after this. File restore is OK, except for the odd invisible file turning visible. Block restore appears fine when I skip the checksum comparison.
    The 1st time it happened I made my 'install portions' smaller, and found that the error occurred after adding iTunes 7.1.1 to the image. However, now that it happened again with some 3rd party software I am really puzzled.
    My work volume runs 10.4.4, the source partition is on the internal drive, and my test partition is on a Lacie Porsche drive.
    So what's this error -206??
    Imac G5   Mac OS X (10.4.4)  
    Imacs G3 & G5   Mac OS X (10.4.4)  

    Cornelius,
    Both of your links seem to apply to OS 9.
    Yet, there may be something here, as they both indicate a problem with 'sound'; the msg itself claims a corrupt snd resource, and the app "Error codes" says it's a Sound Manager error.
    So I went looking in iTunes.
    In its Resources folder there's "Complete.aif".
    When I doubleclick this, it shows up in iTunes as "sappy.snd".
    Now I am really puzzled.
    FWIW: DiskWarrior 3 had a problem with the same aif file when Quicktime was updated to 7.0.x (forgot which one).
    I will see what happens when I remove this aif file, then post back.
    Another open point; I found I could block-restore an image with iTunes 7.1.1 if I checked 'skip checksum' in Disk Utility. The man page for asr calls this 'dangerous' but doesn't specify the dangers. Would you know anything about this?
    About my setup: I do not update my working volume. Instead, I start from scratch on a spare partition, then migrate when this turns out OK. I make and test images while building.
    Thanks (again) for your help.
    Imacs G3 & G5   Mac OS X (10.4.4)  
    Imacs G3 & G5   Mac OS X (10.4.4)  

  • ITunes error message - "video format is not supported by the iPad" My video is mp4, mpeg-4.

    When syncing my iPad 2....  Why do I get this iTunes error message? "video format is not supported by the iPad"
    My video is mp4, another is mpeg-4.
    I thought the iPad 2 could play almost any format.

    Must conform to these specs:
    Video formats supported: H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    Or download an alternate video player,such as avplayerhd.

  • ITunes error 7 (windows 127) VideoToolbox.dll

    I have uninstalled, reinstalled, tried installing the videotoolbox.dll file seperately, and looked up just about everything i can find but nothing matches my exact problem or fixes it. When I try to open itunes i get 2 error messages. The first reads:
    "The procedure entry point kVTCompressionPropertyKey_ThrottleForBackground could not be located in the dynamic link library VideoToolbox.dll"
    After I click ok I get another pop up saying:
    "iTunes was not installed correctly. Please reinstall iTunes
    Error 7 (Windows error 127)"
    Can anyone help me fix this?
    Thank you
    P.S. I am running Windows 7 64-bit

    See iTunes launch errors caused by iAdCore.dll.
    Review the rest of the user tip if required.
    tt2

  • Itunes error

    when i try and open itunes on my laptop i keep getting the error message Itunes new library and it wont let me open it. I've tried repairing it on control panel and i've also tried installing a newer version. Nothing works.
    Any ideas?
    Cheers

    Well, I've been the victim of curious and unsolveable iTunes errors, too, but not the same as what you describe. I suspect it had something to do with updating my computer with an external drive/iPod mounted. Or it was just one of those funny little bugs from Apple. You might try backing up, repairing permissions, repairing the start-up volume, and resetting the PRAM.
    And if that doesn't work or you already tried that, well... Have a good one!
    That's a quote from my favorite cancelled cartoon show, Futurama. Bender says that to Zap Branegan as he is about to get pulled out a breech in the hull into the infinity of space. Seems like it may apply to your situation, too.....

  • How to fix itunes error 1611 while restoring ios 4.3.2 , and when i restore to 4.2.1 the can be ok.plz help me

    how to fix itunes error 1611 while restoring ios 4.3.2 , and when i restore to 4.2.1 the can be ok.plz help me

    have a look at this support article.

  • ITunes update shows runtime error R6034/iTunes error 7/Windows error 1114. iTunes tells me to reinstall but I've uninstalled/restalled and get same error messages.

    After iTunes update I see this - Runtime error R6034 "application has made an attempt to load the C runtime library incorrectly".  ThenUninstalled then I also get iTunes was not installed correctly. Please reinstall iTunes error 7 (Windows error 1114).  I've tried fixes for runtime but computer says there are no errors.  I've uninstalled/reinstalled iTunes and get all the above messages.  Now when I start up my computer the runtime error pops up, but once it is closed computer works fine until I try to open iTunes.  I've even tried a system restore going back to November.  I use iTunes for audiobooks on iPod and I'm going to get desperate soon. Any suggestion?

    Follow the instructions of tt2 in: https://discussions.apple.com/thread/5822086

  • ITunes error message -39

    Hi,
    I'm running an eMac 10.3.9, iTunes 6.0.4 and an iPod 30gb photo.
    I started having problems a few days before the latest iTunes update came out earlier this week, with iTunes not quitting and it not being able to find the library.
    Now with the iTunes update, I get the error message
    "the iPod cannot be updated. An unknown error occurred (-39)"
    I have run Disk Warrior 3.0.3 over the disk and the iPod with no change.
    I have run Onyx and Yasu to reset permissions, cron etc etc. with no change.
    There is no reference to iPod/iTunes error -39 on the Apple website nor in this forum.
    I have changed USB ports with no change.
    The iPod appears in the iTunes menu and the battery charges. I can also open the iPod disk and work with the contents.
    I have reset the iPod with no change. I used the 'hold the central button and Menu at the same time' trick, so could go one step further and delete everything from the iPod and start again.
    But that is assuming the problem is with the iPod. If the problem is with iTunes I won't be able to reload all my songs onto the iPod.
    Any hints appreciated.
    Tim
    eMac 1.25gHz   Mac OS X (10.3.9)  

    Problem resolved by restoring iPod to factory settings and reloading all the songs.
    Prior to this I deleted iTunes and downloaded a new version from the Apple site. This did not resolve the error -39 message.
    Then I took the plunge and restored the iPod. Works fine now.
    I'm posting the fix to help anyone into the future with the same problem.
    Tim

  • TS1424 cannot connect to itunes error messageinformation from sync services Reconnect or try again later

    cannot  conect to itunes error message "itunes was unable to load data class information from sync services Reconnect or try later"
    i hate itunes!!!!!!!!!!!!!!!

    Hello tonyb2910,
    The following article should be just the thing to put Sync Services down and get your iPhone working smoothly with iTunes again.
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    http://support.apple.com/kb/TS2690
    Cheers,
    Allen

  • HT1926 Have the same problem as many other users: tried to update iTunes on Windows 7 today; first message "unable to locate component- MSVCR80.dll was not found" then "iTunes was not installed correctly. Please reinstall iTunes - Error 7 (Windows error 1

    I have the same problem as many other users: updated iTunes on Windows 7 on Jan 26, 2014 and iTunes does not open.  First message "unable to locate component- MSVCR80.dll was not found" then "iTunes was not installed correctly. Please reinstall iTunes - Error 7 (Windows error 126)". When will Apple fix this? Don’t feel like uninstalling all Apple software and then re-installing it as suggested, as I am on a terribly slow internet connection while travelling in the DR Congo.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall press on)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • When I try to open iTunes, Error 2 appears saying that iTunes won't open b/c "Apple Application Support was not found". What do I do???

    When I try to open iTunes, Error 2 appears saying that itunes won't open because "Apple Application Support was not found". What do I do???

    If your problem is only w/iTunes, you really should re-post over in the iTunes for Windows forums instead of the iPod forums. 

  • TS1538 I have a 4th generation iPod. My system is Windows 7 64-bit. iPod not recognized in iTunes. Also getting iTunes error about cd/dvd drivers not installed. I have reinstalled 4 times and finally got iPod software installed properly. Please help!

    I have a 4th generation iPod. My system is Windows 7, 64-bit. iPod not recognized in iTunes. It is in my computer. Also getting iTunes error message about cd/dvd drivers not properly installed. I've restalled 5 times and still not working.  Finally got iPod software to properly install. Please help!

    Did you try this:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Maybe you are looking for

  • DVD drive not recognized, then all out crash. HELP!

    I was watching a DVD, and then I got an email notification which caused the DVD player to freak out and freeze. I restarted the computer to find out that the DVD drive was no longer recognized. Restarted a couple more times...no luck. Now's I've got

  • Classic Po as follow on doc not created and could see Pr instead

    Hi All, Working with SRM 5.0 and ECC6.0 and Classic Scenario. When I create a SC and assign the vendor with a Back end Contract , the follow on Document created is a PR instead of the expected PO.I have set the PR/Po option in Define the Objects in t

  • New to java, need a applet loop

    Hello, I am trying to create a simple double buffering tile drawing applet based on a two dimensional map array. I have it working fine, however I would like to create a main loop which will keep calling pain() until the escape key is pressed. Can so

  • Missing managed masters in Aperture 2.1.4

    I am missing 1200+ masters in Aperture 2.1.4. These are all managed files, and I have checked inside the library to make sure they are all there. Yes, they are, and no, I didn't move anything. I have Checked Consistency and Rebuilt the library severa

  • HT201274 how can i erase all the settings on an ipod i've forgotten the security password too?

    my dad set up my ipod years ago and has since then forgotton the password, i would like to reset it to the original settings but don't have a password, what do i do now?