Itunes error 3002 when updating

hi everyone ...
im on iphone 4 ( 4.3.3 ) and i cant ride of error 3002 each time i try to update i`ve tried everything in this link :http://support.apple.com/kb/TS3694
i`ve tried another computer , editing host file, DFU mode, recovery mode, restoring, reinstalling itunes, updating itunes ( 10.5.1 )
nothing worked ! note that if i restore i get the error 2005 ?! ( remove all USB devices )
any suggestions ??

In my case (iPad2 updating to iOS 5.0), iPad entered into a continuous loop of rebooting and shutting down and not accepting any of the commands given by the buttons on it. Only apple sign was showing on the screen and disappearing with each cycle.
It turns out that the Apple "in-ear headphones with remote and mic" were defective and as soon as I unplugged it, the cycle was broken!!!
Just wanted to drop a line hoping that it may save some time to one of you.

Similar Messages

  • Updating to new iTunes, error message when updated and restarted computer.. trying to uninstall, wont work.

    I updated my iTunes on my windows 7 laptop. I restarted the computer to relaunch iTunes and get it back running and it said that there was an error updating. Trying to uninstall and reinstall,comp wont uninstall programs -.- what do?

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"? Ones with a green checkmark are solved.

  • Error message when updating Itunes...can not open Itunes program

    I am recieving error message when updating Itunes for my computer.  The error message reads "MSVCR80.dll is missing and the other error message reads Error 7  (Windows error 126)"  I can not open my Itunes.  I have reloaded the Itunes onto my computer but still have the same error messages.  Please help.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99364)

  • I recieved an error message when updating to itunes version 11.1.3.8. Says itunes has attempted to load C runtime library incorrectly. Version 11.1.3.8 works. How do I correct?

    I recieved an error message when updating to itunes version 11.1.3.8. Says itunes has attempted to load C runtime library incorrectly. Version 11.1.3.8 works. How do I correct?

    Hi there MRDLS,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    -Griff W.

  • HT1766 error 8000067 when updating version 5.1 on ipad1..what to do?

    Error 8000067 when updating version 5.1 on Ipad. please help to avaoid to loose everything. thanks and regards

    iOS: Unknown error containing '0xE' when connecting to a Windows PC
    http://support.apple.com/kb/TS3221
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • Upgraded to 10.3.1.55, now can't set iT as default player,"An error occurred when updating the default player for audio files types.  You do not have enough access privileges for this operation." How to fix?

    After I upgraded iTunes, iTunes doesn't recognize CD in the drive, apparently isn't the default player.  It won't let me set iTunes as the default player, I get the error message "An error occurred when updating the default player for audio files types."  I tried Whitesides' remedy (changing Read Only status in folder in Windows) but it didn't solve the problem.  Any suggestions?  Thanks.
    J

    Oddly enough. I think I just solved it. It looks like, for some reason, my computer has about 8 different "iTunes music" folders, and I've been saving my music to the wrong one. Neat. Music now imports and plays as it should. Copying things over is going to be so fun tonight!

  • Error 1602 when updating Iphone 4 from 4.3 to 5.. Any help ?

    Error 1602 when updating Iphone 4 from 4.3 to 5 and after that it goes into "recovery mode" but Its not recognized by Itunes, I can only exit it with Tinyumrella and nothing else.

    It seems that the itunes program has some interfefence when contacting the apple server.
    i had this problem gave me error message 3200, i turned off the anti virus after restarting the computer(windows vista) and restarting the phone.
    Turned off the sidebar, and closed any programs in the notifications section such as nokia ovi etc which load up when the computer starts also skype.
    ha presto it began the process of transfering the file to the iphone4 and has now fully updated
    hope that helps
    leon

  • HT4972 why am i getting an error -48 when updating to iOS5 on my iPad

    why am i getting an error -48 when updating to iOS5 on my iPad and how do I fix it? Apple's suggestion does not work.

    I'm sorry but I don't what the error means other than the ipsw file is bad - which is what it says in the article and it usually relates to something in the specific user account.
    You did try creating a new user account on the Mac and tried updating that way? You have no security software running on the Mac?
    The app that was downloaded using your son's ID should not affect the update to the best of my knowledge.
    jparrsies wrote:
    On a related question, I would not care so much if i could make a good backup and not have the upgrade overwrite this backup.  Once I start the upgrade, iTunes thinks I've never done a successful backup of the iPad and yet I've done at least a dozen over time.
    I'm not sure I understand what you mean here by "iTunes thinks I've never done a successful backup". Are you trying to do a manual backup?

  • HT201210 Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions

    Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions?

    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 1000, and 9006
    Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.
    Errors related to downgrading iOS

  • I upgraded my iphone 5 to iOS 8 and now i get an itunes error message when I try to sync "this iphone cannot be synced. Unknown error.

    I upgraded my iphone 5 to iOS 8 and now i get an itunes error message when I try to sync "this iphone cannot be synced. Unknown error. (-50). my icloud drive was stuck in an upgrade cycle, but i've stopped that and still get the error message.

    I restarted itunes and tried again (based on a similar question/solution from 2012).
    I don't get the error message anymore, but it's really sort of odd that after step one of sync, it looks as if sync stopped, and then all of a sudden you see step 4 of sync.
    Also before the upgrade I had 7+ gigs of space free and after the upgrade I have 10 gigs free. seems like something is amiss, but it's not like I have anyway of determining that.

  • Did you get error 1067 when updating Reader?

    If you got update error 1067 when updating Reader, I'd like to hear more so we can find a solution.
    What OS are you using and what version (such as Window XP SP2)?
    What version of Reader do you have?
    What was the error message you got?
    How much disk space do you have available?
    How much memory (RAM) is on your system?
    I recommend you try installing again using the direct download link noted in this document under "Try a different download link":
    http://kb2.adobe.com/cps/836/cpsid_83641.html#main_Try_a_different_download_link
    Please let me know if this helps. We haven't been able to reproduce this error.
    Thanks so much!

    I just worked through this error on my Dad's computer.  He has XP Home SP 3, Adobe Acrobat 4 and Reader 9.4.7 were already installed. He has been getting to 1067 error for some time and just clicking through it.  I manually un-installed Acrobat 4,  but left the shared files in web/common alone.  I did not touch Reader 9.4.7. I downloaded the alternate installer for Adobe 10.1.2 for English and ran it.  It did complain, eventually, about 9.4.7 still having a file in use, but I'd left the previous dialog from the 9.4.7 updater failure open.  I closed that 9.4.7 failure dialog and hit 'retry', and the installer proceeded onward and seems to have completed successfully.
    This machine has 1 gig of RAM and approx 4G of free disk space on C:. 

  • Error 1321 when updating Adobe Acrobat Pro even if profile has admin rights and parent folder has full access privileges.

    Error 1321 when updating Adobe Acrobat Pro even if profile has admin rights and parent folder has full access privileges.
    Exact error below:
    error 1321: the installer has insufficient privileges to modify the file C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Xtras\AdobePDF\I386\[dll file]
    Thanks in advance!

    My first thought is to not just apply permissions to the folder but be sure to apply them to all objects inside them. It would be interesting to see if you can rename this file, then rename it back to its original name; this would test permissions nondestructively.

  • Receiving "Connect to iTunes error" message when trying to purchase gems in Kingdoms of Camelot Battle for the North game even though I was able to do so earlier today.

    Receiving "Connect to iTunes error" message when trying to purchase gems in Kingdoms of Camelot game app even though I was able to do so earlier today.

    Hello Robidt,
    The following article provides information and tips that can help restore your connection to the iTunes Store.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Cheers,
    Allen

  • Error 4 when updating the text data

    When i am trying to load the data  using IP i am facing the issue Error 4 when updating the text data.Please suggest me
    Edited by: srikanth reddy612 on Dec 15, 2011 12:45 PM

    hi srikanth,
    you might have selected given lowercase data
    and please check in the Infoobject the lowercase Checkbox is unchecked then it will allow you to update from IP.
    also check in the Datasource fields tab whether particular field is unchecked with lowercase.
    if checked all records you are pushing will have to be in uppercase.
    thanks
    Sankaresh S

  • I am getting an un expected error message when updating the setting to "extend network".  Is there an obvious setting I may be missing?  Cisco router being used.

    I am getting an un expected error message when updating the setting to "extend network".  Is there an obvious setting I may be missing?  Cisco router being used.

    If you are trying to "extend" using wireless only, you may not be aware that Apple designed the "extend" feature as a proprietary setting to only work with other Apple routers.
    It is extremely unlikely that this will work with a Cisco router.
    If your plans call for connecting the AirPort Express to the Cisco router using a wired Ethernet connection, it should be possible to configure the Express that way.

Maybe you are looking for

  • Appleworks:  bounces once, and stops!

    I have read several of the posts about Appleworks and this problem (see below) and have managed to confuse myself about trashing preferences, plists, etc. From the suggestions quoted below the crash log, will someone point out the correct order to tr

  • How do I get the address bar to show the url of the site that I'm on?

    In the old version of firefox, the address bar would show the url of the site I was on. When I would change tabs, the address bar would change to reflect the url of the tab. In the new version, the url of the current site will not show unless I hit t

  • Complete text for payment terms

    please help in picking up complete text for payment terms.i used TVZBT table.but only one line is stored in this table.if they give text in 4 lines,im getting only 1st line if i use TVZBT.please tell how to pick up the entire text.

  • Switching Character Sets in JDeveloper

    Hi, we have developed a number of Portlets on JDev 10.1.2 but used the default encoding of cp1252. When looking back on my course notes I saw that the course instructor had recommended that we set the default project encoding to UTF-8. What are the i

  • How to implement the trigger

    Hi, I'm need of your help in completing the trigger... I need to implement a trigger { after insert or update or delete ....  for each row} on table temp1 ( status , outdated, seq,len) .... destination table is dest1(status ,outdated ,sequence ,lengt