Itunes error during install - msiexec.exe

I'm trying to upgrade to teh newest version of iTunes so I can activate my iphone. During install I get an error message that states there was a problem with MSIEXEC.exe and it will have to be closed, and then asks me to send error report to windows xp. Im in desperate need of help - thanks to all in advance!

open internet explorer and go to the windows update page, you most likely need to update your authorization msi or your root certificates. I'd recomend just grabbing them all, then go for a long long long walk....

Similar Messages

Itunes error during install service apple mobile device failed to start.. help

I had to install Chrome browser in order to use my gmail account. Now I cannot open itunes on my Window Vista computer, get a Microsoft Visual C++ Runtime Library. R6034. I uninstall itunes and reinstall itunes 64-bit itunes installer. During install received error during the 'starting services' process "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privelges to start sytem services. I ignore with the same error message so I abort. At the end of uninstalling I received the Microsoft Visual C++ Runtime Library error again. I click ok than an error from itunes. "itunes was not installed correctly. Please reinstall itunes. Error 7 (Windows error 1114). I click ok. Help..

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Unable to install iTunes - Error during install

Just tried several times to install the latest version of iTunes to no avail, and had no luck with a few searches on google for help. I have been having troubles installing the latest iTunes due to an error with the bonjour service. Assuming it may have been corrupted within my computer, I had tried uninstalling it, which seemed successful, but it is still a service within windows, and is perma-disabled (can't be enabled at all). I have tried installing bonjour on it's own first before iTunes, however, it fails to install, and if I choose to ignore, it does proceed, but is unable to initialize the service. Should anyone have a suggestion to get around this I would appreciate it.
O/S is Windows Vista 64 Bit Home Premium
Hoping I can get this fixed up, else I am going to have to avoid apple products and programs for some time to come, which would be a shame. Also, thanks in advance for any possible solutions.

That was for windows\system32 using scannow and showed 100% complete
Does it make a difference that Apple loads it into Program Files (x86)?
No, it should also be checking through your WOW64 subsystem (that's part of the operating system too).
Can you check something further for me, please? Create a new Windows user account with full administrative rights. Log out of your usual account and log into the new one. (Don't use fast user switching to move between accounts.)
Can iTunes launch in the new user account? (It'll show a blank library if it does, but that's expected. The content is back in your other user account.)
(Checking here to see if the issue is systemwide on the PC, or related to a specific user account.)

Help - Can't install iTunes - Error during install

Am able to install QuickTime, but get to "Install Wizard" and it stops midway and gives me the error message "A later version of iTunes is already on this machine. Installation cannot continue."
I have erased my old iTunes off my machine - but am confused why this update would claim a LATER version of iTunes is on the machine and freezes the installation??!
Pls help - just got my iPod up and running again (after months of it being frozen on permanent lock and having to go back to factory settings several times - trying several fixes) - but can't do anything without iTunes and my music library to load on my iPod.
Thanks in advance - for any/all advice. I'm at my wits end.

hi Laura!
Am able to install QuickTime, but get to "Install Wizard" and it stops midway and gives me the error message "A later version of iTunes is already on this machine. Installation cannot continue."
hmmm. are you installing a true standalone copy of the installer? the size of a standalone for 7.0.3 should be less than 20 MB. how large is your installer?
here's a link to a true standalone:
http://www.apple.com/quicktime/download/standalone.html
keep us posted.
love, b

Itunes error during install

I can't install itunes in windows 7. It always gives me the same error ' Apple Mobile Device not found '
I've tried to uninstall all Apple programs and reinstall Itunes but it still doesn't work .
Please help me, I can't sync my iPad with the PC without iTunes

this is the error; please help me ! Thanks

Error During INSTALL of Application Export File

An error is reported during INSTALL of an application that I am trying to copy (Import/Install) from a "development" Work Space into a "production" Work Space. The production (target) Work Space is on the same HTML DB instance as the development Work Space.
I am receiving the following INSTALL error:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol &quot;,'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)&quot; when expecting one of the following: . ( * @ % &amp; = - + ; &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;=
Following is some pertinent (hopefully) information:
The above INSTALL error takes exception to part of a Region Select (sql) that works fine in the development Work Space.
The common HTML DB (v1.6) instance is on UNIX.
A new Work Space was created on the same instance.
A new schema name was created during creation of the new Work Space. However, this schema does not point to a database. (We were not certain how to setup the schema to parse to our live database.) I will be running DBLINK upon production application startup in order to access the database objects.
EXPORT INFO -
File Format: UNIX (also, tried DOS but received same error during INSTALL)
IMPORT INFO -
File Type: Application/Page Export
File Character Set: Western European Windows 1252
Target Work Space is newly created on the same HTML DB instance.
INSTALL INFO -
*Parse As Schema: COLLIVE17 (Again, this schema does not parse to a database. I intend to use DBLINK.)
*Build Status: Run and Build Application
Please refer to above error message.
Again, any insights or suggestions are appreciated.

Urgently need help! I've read several other Forum messages having a related problem but none having same Install error message.
Again, my Export/Import from development Workspace to production Workspace is successful. The following error is reported when I attempt to "Install" into the production Workspace:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol &quot;,'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)&quot; when expecting one of the following: . ( * @ % &amp; = - + ; &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;=
The "snippet" of Region Sql Select code that relates to the reported error is:
ELSE htmldb_item.display_and_save (5, DECODE (GET_GRADE_B93 (sac.stc_final_grade,sac.stc_verified_grade),'18','AU','1','A','3','B','4','C','7','CR','5','D','46','DR','6','F','47','FW','49','IB','30','IC','31','ID','23','IF','44','MW','9','NC','21','RD','14','RD0','33','RD1','32','RD2','34','RD3','35','RD4','36','RD5','37','RD6','38','RD7','39','RD8','8','S','10','U','43','UD','41','UG','11','W'),'GRADE_'||ROWNUM) END q_v_grade,
HTML DB version is: 1.6.0.00.67. I've also tried to Export/Import/Install the application into the "same" Workspace specifying the same schema, and only changing the Application ID. However, I get the same Install error (see above).
Any suggestions on things to try in order to get application into production is greatly appreciated.
Thanks, Bernard.

Solution for Power Saver error during install

Hello,
i have read several topics about the powersaver error during install of this utilty.
i had the same problem even with a clean install of windows XP and i have found the solution.
The error seems to disapear and Powersaver works fine after install of the Hotkey utility :
http://support.toshiba-tro.de/tools/Satellite/sa60/win-xp/hotkey-dd/hotkey-dd-xp-10008sa-du.zip
Hope this post where helpfull.
Greetz DeLorean
[Edited by: admin]

Hi
You are absolutely right. Common modules is a kind of basic application who must be installed first. All other Toshiba tools should be installed after. The functionality of Power saver utility depends also on installed common modules.
Unfortunately I can not give you any kind of advice but in case that there is some error message the best solution is to remove and install the Power saver again. Check also Toshiba download page. Maybe you can find a newer version.
Bye

Quicktime errors during install, uninstall, or run

Quicktime errors during install, uninstall, or run. No error code. It just says it encountered an error and must exit.

I located a previous response that satisfied my issue. Below is the process that allowed me to use quicktime.
The "fatal error" in this context has (recently) been indicating trouble with old, misplaced QuickTime componentry lurking about in your system.
(Whether or not the message is a symptom of that problem seems to depend on what version of old misplaced stuff is lurking and what version of QuickTime proper we're trying to install or uninstall ... but in recent times, there's been an uptick in fatal errors being caused by that.)
So let's try investigating that possibility first.
First we'll adjust some view settings on the PC.
1. Open My Computer from the desktop or Start menu.
2. In the Tools menu, click Folder Options.
3. Click the View tab.
4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
5. Click OK.
Now in "My Computer" open Local Disk C: (or whichever drive your operating system is installed on).
Open the "Windows" folder.
Open the "System32" folder.
What files or folders can you see in there with QuickTime in the file or folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

Errors During Instalation Of Final Cut Studio 5.1

Aloha,
I am having some trouble here!! I am trying to install FCP Studio Pro 5.1 on my mac. I tried to do an upgrade from FCP 4.5 HD on my orriginal Hard drive. The instalation went through its paces & asked me to put in the second disc. I did then it came back with an anoucment that there were errors during instalation & to try again I did & was never able to get it to instal... Getting frustrated I ran diskworior on the drive & tried again no luck... after some time I thought it might be the drive would not let me because there was an earlier version on there.... so any way after some other problems with this drive I decided to completely erase & instal Mac OSX on my second hard drive that has never had anything on it. I made this my new startup disk & upgraded the OS to OS 10.4.9 I then Tried to install FCP Studio Pro 5.1 on this drive.. this time It never got to ask me to put in another disk it came back with the same error during instalation try again!!!!!! So now I am getting ******!! but odly enough Final cut studio shows up in my aplications. When I click on it it gives me a warning that there was an error registering & once I click ok it seems to launch FCP 5.1....... ?? So is it really there or not??? & why is it not installing the other 4 discs??? and to add insult to this I have tried to install iLife 06 & I get the same error!!!! WHY!!!!!!!!!
Another thing.. I installed FCP Studio Pro 5.1 on another Identical computer down the street & it installed no problem!!!!
Can anyone help Please!!!!!!

I would take a different approach.
I would backup the old drive files to an external, and then do a clean wipe and new install of OS, updates and the FCS.
Best way to do it, in my view.

FCP error during install.

I keep getting an error after installing FCP 5.1.1.
It says error during install please try again.
Im using 10.4.7 on my ibook 1ghz 640mb ram.
I know it will work because a friend has installed it on his.
Any one help?

This most often caused by a damaged or otherwise faulty disk in the package. It happens. Try cleaning the disks and then get out your receipt and serial number because your only recourse will be to call Apple for a replacement.
bogiesan

WRT160N error during install

I just purchased WRT160N and during the install of LELA there is an error. " Linksys Updater failed to start- verify you have sufficient privileges to start system services" pops up during install. Then it asks to retry and it hasn't worked or close window. Then when says this "Setup for Linksys Advisor has failed "Fatal Error During Install" please check your settings and try again.
Help! I am not computer savy, and don't want to start changing anything and screw it up.
Internet is working on the installed computer (I believe this is called the gateway? not wireless uses the ethernet cable)but I can't setup my wife's new laptop til this is fixed.
BTW this is a cable modem hook up if that makes a difference. I have tried restarting, turning power off as well but still get the same problem every time.
Thanks,
Don

As you have mentioned that your Hardwired computer is able to go online throught the router, and now you are trying to setup your wireless computer. You dont have to run the setup disk on your computer, you can configure all the settings on your Router manually and then make your Wife's computer go online wirelessly..
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

OMS error during install Grid control 10gR2 on Windows 2003

He,
I get this error during install Grid control 10gR2 on a new server win2003.
"oracle.sysman.emcp.agent.AgentPlugIn"
What I see in forums is that I have to stop my listener and continue my installation.
But I still have the same error !!
Can you please help?
Many thanks

There are some guidelines here:
Subject:      OracleAS Install Error When Configuring AS Console Agent - "oracle.sysman.emcp.agent.AgentPlugIn has failed"
     Doc ID:      Note:386308.1
The solution stated is "Check the contents of the hosts of file and ensure that every entry is correct. All hostname / ip addresses have to be valid."
When installing AS 9i R2 there was an issue with the names, those were supposed not to hava a hypen, so may be something was inherited from those kernels.
There is another metalink note that document hosts issues:
Problem: AgentCA: Grid Control Release 2 install fails with java.lang.Exception: 6 during Agent Configuration Assistant
     Doc ID:      Note:358640.1
~ Madrid.

Integrity constraint error during install

We have installed htmldb on zlinux from the companion CD.
Because we had an error during install of the flows schema we repeat it (have removed the Flows-User and Flow-Files before) using ins.sql! The apache was still running.
Most of the new installation was fine but near the end we got:
error creating "Procedure arguments" id=122 Ora-01400, cannot insert NULL into ("FLOWS_010500,"WWv_Flows_STEPS","SECURITY_GROUP_ID")
declare
Error at line1
Ora-02291- integrity constraint(FLOWS_0150000.WWV_FLOW_PLUG_ZO_PAGE_FK) violated
parent key not found
ORA-06512 at "FLOWS_01500.WWV_FLOW_API line 4695
...

OK, it's solved:
I finally managed to install Apex 3.0 correctly once I figured out my error.
I was logging in remotely to the server the dadbase was on, then trying to connect to sqlplus using 'sys/password@instance as sysdba' to run the script.
Turns out that the problem had something to do with sys not being allowed to be sysdba when I log in remotely, or that having the username/password and instance info in there made the program think I was logging in remotely and therefore not giving me sysdba privileges.
The root of the problem was running the install .sql without the correct privileges.
Since I found out the database server I was trying to install on uses OS authentication, I remote-connected to the database server as the oracle user, tried to run the install .sql again after connecting to sqlplus: 'conn / as sysdba'
and everything worked like a charm!
~PF :)

Error during install of the iTunes 11.0.1 update on Windows Vista

Error during the process of installing the iTunes update to 11.0.1, when iTunes attempts to write to file C:\Config.msi\b530a0c.rbf. iTunes says it can't access that directory, but i'm installing iTunes as an Administrator. And i don't find the specified file in this directory on my c:\ drive

I seem to have solved this problem as follows:
1. Download the iTunes.exe file from apple.com, but save the file to my Desktop rather than running it.
2. Execute (double click) the iTunes.exe file from my Desktop.
3. When i encountered the problem that i've reported (the iTunes installer announces that it can't access a file in the c:\config.msi directory, i clicked the Retry button in the error window. The iTunes installer process appeared to move past the error.
4. I experienced the same error one more time during my apparently successful iTunes 11.0.1 install, but the 2nd time this error came up iTunes reported that it was trying to access a different file name in the c:\config.msi directory. Again, i clicked the Retry button in the error window and the iTunes installer appeared to move on past the error.

I tried to download itunes 10.5.3 and an error during instalation occurred it says'Microsoft.VC80.CRT,type="win32",version="8.0.50727.6195".publicKeyToken="x 86"'.

'Microsoft.VC80.CRT,type="win32",version="8.0.50727.6195".publicKeyToken="x86"'. why??

OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

Itunes error during install - msiexec.exe

Similar Messages

Maybe you are looking for