Itunes error message -42406, required Itunes component.

I have reinstalled the newest Itunes version but I get the same error. Music plays but my Ipad is not recognized. What to do?

Could you post some minimal diagnostics for us, please?
In iTunes, go "Help > Run Diagnostics". Uncheck all four boxes, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.
(Fingers crossed, the list of installed components may give us some clue as to what iTunes thinks is missing.)

Similar Messages

I have been using itunes on my windows based pc for years but since installing the latest itunes update I have been getting the error message A required itunes component is not installed. Please reinstall itunes. (-42404)

I have been using itunes on my windows 64 bit laptop for years but since downloading the latest itunes 10.7 update whenever I opened itunes the error message 'A required itunes component is not installed. Please reinstall itunes (-42404)'
Itunes would still load and play music in my library and I could still sync my ipod but when loading a CD itunes would not recognise the album/tracks and I would need to type them manualing after uploading.
I have just bought the new iphone5 and went to sync the phone with itunes. itunes recognises the iphone when plugged in via the usb port or when wi fi is turned on but itunes will not allow the phone to sync.
I spent over an hour the other morning speaking to apple customer support and have ensured I have administer right and that UAC is turned off.
I was taken through msconfigure and adjusted the startup tab but still no joy.
In the end I was e-mailed instructions on how to uninstall and then reinstall itunes and component parts.
Now that I've uninstalled itunes when I try reinstalling I get the following messages during the download.
The 1st message is;
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
When I click ok the next message that appears sometime later during the install is;
Service 'Apple Mobile Device' (Apple Mobile Device) Failed to start Verify that you have sufficient privileges to start system services.
The options I have are to abort, retry or ignore. If I retry the same message comes back and if I abort or ignore the download continues and I then get the following message:
'Apple Application Support was not found. Apple Application Support is required to run itunes Helper. Please uninstall itunes, then reinstall itunes again. Error 2'
After attempting to reinstall itunes only some components were installed however itunes would not open.
It would appear many people have experienced problems with this latest download!

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

I recently downloaded the latest iTunes and now keep getting the error message "A required iTunes compnent is not installed. Please re-install iTunes (-42404). I have re-installed 10x and still no luck. iTunes will not sync with my iPad. Can anyone hel

I recently downloaded and installed the latest version of iTunes and now keep getting the error message "A required iTunes component is not installed. Please re-install iTunes (-42404)".
Since this, my iPad will not sync, despite resetting it many times.
I have downloaded and installed the new iTunes more than ten times with no luck.
Please can anyone help!!!!!!!

Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now?

ITunes failed to respond on my PC and gave me an error message to say a component - MSVCR80.dll - was missing. Never happened before and I have hundreds of tunes, playlists, Podcasts etc. in there somewhere. What is this about? Brian Forster

iTunes failed to respond on my PC and gave me an error message to say a component - MSVCR80.dll - was missing. Never happened before and I have hundreds of tunes, playlists, Podcasts etc. in there somewhere. What is this about? Brian Forster

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

HT1926 Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes I get error messages, "unable to locate component, AVFoundationCF.dll not found," then "Error 7 (Windows error 126)

Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes, I get error messages, "unable to locate componant AVFoundationCF.dll not found," then "Error 7 Windows error 126." I have tryed to reinstall twice with the same result.

Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message.

HT1848 I cannot authorize my computer, I'm having this error message The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." please hel

cannot authorize my computer, I'm having this error message The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." please help me

Doublechecking. In the course of your troubleshooting to date, have you worked through the instructions from the following document?
iTunes: Missing folder or incorrect permissions may prevent authorization

HT1386 my ipad wont synch to my i tunes it shows error messages the required disk can not be found and the apps found on the ipad can not be determined

My I pad wont synch to my Aplle or I tunes it shows the error message the required disk can not be found and the apps installed on the ipad could not be determined

Quit iTunes, reboot your computer, restart the iPad and then try again. Use another USB port on your computer as well.

HT204382 Jfiles, still getting error message that required codec is not available -- Help!

Just installed Telestream to open wmv files, but still getting error message that required codec is not available -- Help!

I'm still getting that same message how did you fix it? i installed the wmv player or Flip4Mac (i'm unsure if thats the same program), but even after i am still getting the pop up saying " The movie ____.avi" can't be opened. What am i doing wrong?

Error message: "Missing required plugins" - Illustrator CS3 will not load

I am running CS3 Web Prem on Vista, dual core Athlon with 2g Ram.
Illustrator has stopped working - gives error message: "Missing required plugins. Pathfinder Suite." Or it says "Missing required plugins. ArtConverters.aip PDFformat.aip Pathfinder suite.aip Rasterize.aip"
I have tried the suggestions from knowledge base article - I have tried deleting AIprefs; I have also tried in new user account - initially worked but not on opening program a second time. I have also re-installed Illustrator.
Any other solutions?

Glad to hear it.
Not sure what possible nuances to performance or memory management there may be to running in compatibility mode. Since I can't run in any other mode, it is hard to make a comparison.
It seems to run fine though, for me.
There should be a Windows Update that came out in the last day or so that is supposed to address this issue (http://support.microsoft.com/kb/947562). At least thats what it says.
BUT, after that fiasco with SP1, I am real reluctant to do any more updates.
SP1 toasted my ability to connect with network resources, external and some internal hard drives, ALL my USB equipment failed to connect anymore. I removed SP1 (uninstalled it per the instructions on the MS KB) but that process trashed the OS and required a complete clean re-install of Vista. A week later I am pretty much back to where I should be (see, my system backups were with SP1. Brilliant, eh?).
Still have to run many so-called "Vista Compatible" applications in this compatability mode though.

Windows Installation error message a required ressource can not be located: ms visual c 2005

no idea what to do. please help me!

Am 04.11.2014 21:48, schrieb Jeff A Wright:
>
windows Installation error message a required ressource can not
be located: ms visual c 2005
created by Jeff A Wright
<https://forums.adobe.com/people/JeffAWright> in /Creative Cloud
Download & Install/ - View the full discussion
<https://forums.adobe.com/message/6899407#6899407>

Purchased Photoshop Elements 13, downloaded, entered serial numbers, then got the error message: OS Requirement not met, Windows Vista not supported.

Purchased Photoshop Elements 13 (upgraded from Photoshop Elements 10), downloaded, entered serial numbers, then got the error message: "OS Requirement not met, Windows Vista not supported" now what?

Sweetie Bug wrote:
now what?
System requirements | Adobe Photoshop Elements
The last version of PSE which supported Vista was version 12.
You'll either have to upgrade your operating system to Windows 7 or Windows 8 or return PSE 13 for a refund.

Error message says required index.xml file is missing and and will not open

When I try to open my documents, I get an error message stating, "The required index.xml file is missing."
Thank you for your support,
Monique

I have the same issue when trying to open a saved Pages or Numbers document created or modified on my iPad Mini running iOS 7 from my older version of those apps on my iMac (running Snow Leopard and iWork '09). As a work around, export the document as an Excel or Word xlsx or docx file to iTunes on the iOS device, save it to the desktop, and then open and re-save in the older native format.

Podcast Feed Error Message "We Require that feeds include a title"

I am attempting to submit podcasts to the itunes directory and I get the following error message when I provide my Podcast Feed URL.
"We Require that feeds include a title"
My Podcast URL:
http://web.me.com/tommyboltz/TomorrowsSports_Page_Today/Daily_SportsPicks/rss.xml
I tested this URL by going to ADVANCED on the itunes menu and it worked fine.
PLease help. I want my Podcast to show up in the itunes store.

Yep, there is something missing there, but perhaps it is because you have entered the same data twice (or in the wrong place).
If you look at a Feed, for example in Safari, there is a line at the top which is (of course) a title. I have one at feed://www.extensions.in.th/ext_link.xml and when you link to that, you get "Macs in Bangkok - Information" on the top line. This information is entered in the "Channel" section, and I have <title>eXtensions: Macs in Bangkok - Information</title>
What I see with your however, is "feed://www.blacklightaudio.com/Site/Podcast/rss.xml" instead of descriptive information. If you go back into the application you created it in (or even a text editor) you will see the relevant line.
Message was edited by: Graham K. Rogers
As an additional point, I see that the links themselves within each item are not right. They show with a % sign between the parts, which I am pretty sure is an indication that there are spaces that should not exist.
Message was edited by: Graham K. Rogers

Error message for required inputText components with no label

I'm using JDev/ADF 10.1.3 (but I suppose that an answer for 11g would still be the right answer.)
I'm creating a panelForm (or in 11g it would be a panelFormLayout) with a line for City, State, Zip, all required fields. Here is the code:
<af:panelLabelAndMessage label="#{res.cityStateZip_label}">
   <af:panelGroup layout="horizontal">
      <af:inputText value="#{backing_facilityUpdate.city}"
                          columns="30" maximumLength="30"
                          required="true"
                           requiredMessageDetail="#{res.requiredMessage}"
                           tip="#{res.city_label}"/>
      <af:inputText value="#{backing_facilityUpdate.state}"
                          columns="2" maximumLength="2" required="true"
                          requiredMessageDetail="#{res.requiredMessage}"
                          tip="#{res.state_label}"/>
      <af:inputText value="#{backing_facilityUpdate.zip}"
                           columns="10" maximumLength="10" required="true"
                           requiredMessageDetail="#{res.requiredMessage}"
                           tip="#{res.zipCode_label}">
          <af:validateRegExp pattern="^\d{5}(-\d{4})?$"
                                     noMatchMessageDetail="#{res.zip_invalidMessage}"/>
       </af:inputText>
   </af:panelGroup>
</af:panelLabelAndMessage>This gives me the appearance I want. But because there is no "label" attribute on the three inputText components, when a user doesn't fill them in, the error message shows the requiredMessage from the resource bundle, with just a dash - no identification of the field. I tried setting "shortDesc" - doesn't help. The "tip" doesn't do it.
Is there a way to identify which field was not filled in without setting the "label" attribute, or a way to set the label attribute, but not display the label except in the message?

Thanks - adding the labels with simple=true works in 10g as in 11g. This makes it ignore my "tip" attributes, but I can live with that. I added some spacing so I think people can tell which fields get City, State, and Zip even without the tips. I suppose I could add a line of outputText components under the line, but getting them spaced properly might be a problem. No, I'll live with what I've got.
Thanks.
Edited by: jflack on Nov 5, 2012 10:32 AM

Itunes error message -42406, required Itunes component.

Similar Messages

Maybe you are looking for