Itunes error message - 42408 even after latest download...thank you

I've been getting a message saying Itunes cannot be accessed - so just updated to Itunes 11.1.3 but still getting error message -42408. Any thoughts?
Thank you and Happy New Year

Hey there davidgor2!
I have found an article that should help you resolve this issue with updating your iTunes. The article can be found here:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
and the specific part of the article you will want to look at first is right here:
"Error 42023" through "Error 42408"
These alerts might occur when trying to authorize iTunes or during launch when iTunes checks for authorization information.
Install the latest iTunes from apple.com/itunes/download/
Remove the SC Info folder.
If that does not resolve the issue, see iTunes: "Error 42408" or "Error 42404" after upgrading to iTunes 9.0.3.
Thanks for using the Apple Support Communities!
Regards,
Braden

Similar Messages

  • TS3258 I get error message -42408 when trying to download itunes update 11.0.2 and thus can not upgrade to latest version.  What should I do?

    I get error message -42408 when trying to download itunes update 11.0.2 and I therefore can not update to that latest version.  What can I do?

    Hey there davidgor2!
    I have found an article that should help you resolve this issue with updating your iTunes. The article can be found here:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    and the specific part of the article you will want to look at first is right here:
    "Error 42023" through "Error 42408"
    These alerts might occur when trying to authorize iTunes or during launch when iTunes checks for authorization information.
    Install the latest iTunes from apple.com/itunes/download/
    Remove the SC Info folder.
    If that does not resolve the issue, see iTunes: "Error 42408" or "Error 42404" after upgrading to iTunes 9.0.3.
    Thanks for using the Apple Support Communities!
    Regards,
    Braden

  • ITunes error messages while syncing after 0SX 10.6.6 update

    After installing the recent OSX 10.6.6 update, I am receiving the following error messages in iTunes when trying to sync both my iPhone 4 and my 1st generation Apple TV:
    iPhone error message:
    "The iPhone cannot be synced. The disk could not be read from or written to."
    Apple TV error message:
    "iTunes cannot sync photos to the Apple TV because of a problem on your computer. The disk could not be read from or written to."
    I'm not sure if this matters - but in the iPhone error message - it does not state if the "disk" is the iPhone or the computer - but in the Apple TV error message it does make this distinction, saying that the problem is on my computer and specifically mentions photos.
    Now, once I dismiss either of the error messages, the sync progresses normally and completes successfully. Also, I have checked my computer (MacPro) and all diagnostics (including the internal hard drives) pass with flying colors. And the computer is working fine otherwise - so I have no reason to believe that there is a hardware problem with the computer. And I would find it very strange that I would have a hardware problem with both my iPhone and Apple TV appearing at the exact same time. And finally, both the iPhone and Apple TV are performing normally when in use.
    Since this problem did not start until after running the 10.6.6 update - logic tells me that is where the problem probably lies.... the question is how to resolve it - anyone have any ideas?

    Both those symptoms are consistent with a damaged photo cache. If you remove your existing photo cache as per the instructions in the following document, does that get you past the error?
    [iTunes: Photo sync creates iPod Photo Cache folder|http://support.apple.com/kb/TS1314]

  • TS3694 white screen continues to stay on after reset and after pressing and hold BOTH buttons (top left and mid bottom front screen bottom button)...in restoring on itunes error message "2009" shows after trying to connect to itunes...any help?

    error message "2009"  and white screen reset fail...what to do??????????...please dont tell me about pressing the 2 bottons at the same time....did that n it DID NOT work in my case.

    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.

  • How do I install latest version of iTunes when I keep getting an error message to go to Tools, Download only, then Install manually??

    How do i install latest version of iTunes when I keep getting an error message to go to Tools, Download only, and install manually??

    Hi Moerdesign,
    Did you downloaded and installed Photoshop and Illustrator CS6 through Creative Cloud.
    After uninstalled them, Creative Cloud saying applications are "Up to Date" when not installed.
    If this is the case then please perform the steps given in the help document.
    http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html
    Please let me know if this is not the case.
    Screenshot of the problem would be great help.
    Regards,
    Sumit Singh

  • Every time i try to update my ipod to the latest version of ipod software i keep gettint the error message "there was a problem downloading ipod software. The network connection timed out"

    every time i try to update my ipod to the latest version of ipod software i keep gettint the error message "there was a problem downloading ipod software. The network connection timed out"

    Most of the times your security software is the cause for the network time out: iTunes for Windows: Troubleshooting security software issues

  • I am unable to download itunes to my pc even after removing all itunes components

    i am unable to download itunes to my pc even after i have removed all previous components of itunes

    when i try to download itunes  i get a message that says thanks for downloading itunes. But it does so instantly and there is no download for me to install
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • I get error message: not enough space to download when I try to buy a tv series on Itunes. It tells me to delete photos or videos to make space, but I have no photos and videos. Help?

    I get error message: not enough space to download when I try to buy a tv series on Itunes. It tells me to delete photos or videos to make space, but I have no photos and videos. Help?

    I would guess that a TV series takes up a fair amount of storage capacity. It is just a standard message I think that may indicate that you are actually running low on storage space.
    If you go to Settings>General>About how many GBs are specified as being available?  If you are low on space maybe deleting some apps may help.

  • Error message when I try to download new iTunes as follows iPhoto 7.1.5 is already installed and was not purchased from the Mac App Store

    I am trying to download new version of iTunes from App store having purchased it on my laptop.  When I try to download on my iMac I get the following message:
    Error message when I try to download new iTunes as follows:  iPhoto 7.1.5 is already installed and was not purchased from the Mac App Store - and then I am asked if I want to buy it again. I don't understand the error message and I don't want to purchase the new version again.
    Also, since upgrading to Lion my videos (from Sanyo Xacti camera) do not play on iTunes. I can only open photos.
    Thank you.

    Make a back up of your Library. Now you can update without fear.
    Regards
    TD

  • My iPhone 4s acts like I need to plug in to iTunes and I got an error message saying it failed to download update and now the screen won't go away. USB port end on phone with arrow pointing to iTunes...

    My iPhone 4s acts like I need to plug in to iTunes and I got an error message saying it failed to download update and now the screen won't go away. USB port end on phone with arrow pointing to iTunes...

    Now iTunes will not recognize my phone as a device...

  • Having a constant error when downloading latest update for Illustrator CC, error message: Adobe Illustrator CC Latest Updates (December 2014) Installation failed. Error Code: U44M1P7

    Having a constant error when downloading latest update for Illustrator CC, error message:
    Adobe Illustrator CC Latest Updates (December 2014) Installation failed. Error Code: U44M1P7

    U44.. update error http://forums.adobe.com/thread/1289956 may help
    -more U44.. discussion http://forums.adobe.com/thread/1275963
    -http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
    -http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

  • Download error under apps. After following download steps multiple times still showing error message.

    Download error under apps. After following download steps multiple times still showing error message.

    Hi There,
    Kindly try the below mentioned links.
    Creative Cloud Help | Download Error in Apps tab of Creative Cloud Desktop Application
    Creative Cloud - Download error - stubborn error
    Thanks,
    Atul Saini

  • I am trying to update to iOS5, but after the download completes, I get an error message "There was a problem downloading the software for my iPad2. The network connection timed out." Any suggestions?

    I am trying to update to iOS5 on my iPad 2, but after the download completes, and file processing starts, I get an error message "There was a problem downloading the software ... the network connection timed out."  Diagnostic tests check out OK.  Any suggestions?

    Temporarily disable your firewall and security software and see if that helps.

  • I use a macbook pro..My iPhone 4s refuses to be recognised by itunes even after I downloaded to updated itunes...what now?

    I use a macbook pro..My iPhone 4s refuses to be recognised by itunes even after I downloaded the updated itunes...what now?

    Hi Oneness1,
    Thanks for visiting Apple Support Communities.
    These troubleshooting steps can help if your iPhone 4S is not recognized by your MacBook Pro:
    Plug the device directly into a high-power USB 2.0 port on the computer. If possible, use a USB port on the back of the computer.
    Avoid plugging the device into a keyboard, display, or standalone hub. The USB ports on these accessories may be low-power or only offer USB 1.x connections.
    If you are using an accessory, remove the accessory and connect the device to the computer using only the Apple 30-pin to USB Cable or Lightning to USB Cable.
    If you have access to additional Apple 30-pin to USB Cable or Lightning to USB Cables, try testing with another if the first one doesn't work.
    Restart your computer and device. To restart your device:
    Hold the power button until "slide to power off" appears. Slide to power off your device. When it is off, press the Sleep/Wake button to turn it back on.
    Disconnect all USB devices from your computer, except for your keyboard and mouse. Then reconnect the iOS device. If the issue is resolved, reconnect other USB devices, testing after each connection.
    From:
    iOS: Troubleshooting USB connection
    http://support.apple.com/kb/TS1286
    Ensure that your Mac meets the minimum system requirements for your iPhone, iPad, or iPod touch.
    Install software updates on your Mac.
    Note: If an iTunes update is available, apply the update.
    Check USB connections. iOS devices require USB 2.0 to function properly. If you're not sure your Mac has USB 2.0 ports, refer to the computer's specifications.
    Disconnect other USB devices and connect your device directly to a USB port on your Mac.
    Restart your Mac.
    From:
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    All the best,
    Jeremy

  • Getting an error message when I try to download ITunes 10

    I am getting an error message when I try to download ITunes 10.  Can someone assist

    Try here...   iTunes: Specific update-and-restore error messages and advanced troubleshooting

Maybe you are looking for

  • Oracle error "ORA-01843: not a valid month" when trying to run sqlldr

    Hi all, I'm trying to load some data into a staging database via a CSV file using sqlldr, and am running into an issue where it doesn't like the date format I'm using. Here is my input data: 2012-01-09 16:28:12 -05:00Here is the entry in the .ctl fil

  • SELECT QUERY  BASED ON SECONDARY INDEX

    Hi all, CAN ANYONE TELL ME HOW TO WRITE SELECT QUERY BASED ON SECONDARY INDEX. IN WHAT WAY DOES IT IMPROVE PERFORMANCE. i KNOW WHEN CREATING SECONDARY INDEX I NEED TO GIVE AN INDEX NO -iT SHOULD BE ANY NUMBER RIGHT? I HAVE TO LIST ALL PRIMARY KEYS FI

  • Infoset Using Join - End of Selection

    I have created a Infoset from 2 tables and created a query based on the Infoset. Now I need to write the output from the query to a file in the app server. I think I need to write the code ' END OF SELECTION'.  1) How do I retrieve the values of the

  • Iplanet Web Proxy Server 4.0.19 error 400

    Getting error 400 after upgrading Iplanet Web Proxy 4.0.19 Message from Iplanet Web Proxy 3.6 - working properly Iplanet Web Proxy 3.6 SP12 202.123.21.57 - - [26/Apr/2013:20:21:05 +0400] "POST /as1.html HTTP/1.1" 200 58 200 58 12 12 309 52 427 19 0 D

  • How to format html output of a servlet

    Hello. My servlet/JSP is processed by custom tags and XSL Translation. After all its HTML output looks not formatted. How to format it? It is possible in a standard way (using a web.xml'd directive)? What roughly I want: <html>   <body>   <body> <htm