ITunes error message during installation, help?

Every time I go to install iTunes, it stops in the middle of the installation and gives me this message. "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personal or package vendor." However it does not tell what is missing or how to fix it. What's going on here?

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Similar Messages

"Unknown Publisher" error message during installation

Ok, I have tried for several days and even got ahold of Microsoft on this issue. Every time i go to download Itunes the download is ok, but when it goes to install Itunes, I ALWAYS get "Unknown Publisher" error message and installation is cancelled. How do i resolve this issue? Any ideas?????

Welcome to AD!
Some folks have had success by downloading and installing QuickTime standalone, then installing itunes after QT. iTunes needs QT codecs to play audio & video.
http://www.apple.com/quicktime/download/
Make sure to get the version withOUT itunes.

ITunes error message during new installation of 10.5

I keep getting the following error message durning a new installation of iTunes 10.5.
An error occurred while attempting to create the directory: C:\Program Files (x86)\iTunes.Resources\es.lproj\PurchasedPlacard.nib
The system the installation is occuring on is:
HP Pavilion DV6-3150
Windows 7 Home Premium SP1 64-bit
Intel i5 2.53 GHz, 4 Gig RAM
Antivirus
Norton Security Suite
ver. 5.1.0.29
I did a Virus sweep after the error message and no messages came up. Attempted a second install with the antivirus was disabled during the install and recieved the same error message.
Any suggestions will be greatly appreciated.
Michael G.

I did have image of both Tiger and Snow Leopard OS on my external hdd. I do use this images at my work to install fresh OS on new HDD. it's works fine and there is no issue with it. I tried same images on my macbook but none works and this error appear and same with Snow Leopard Disc installation.

Error message during installation of itunes

I receive the following error message when installing itunes:
Invalid Drive: H:\
What do I do?

same issues here... Using windows 7... I can't install none of the 3 soft. No Safari... No Quicktime... No Itunes... Running 32 bit windows... Error messages "Error 7" and some other error messages durint install... Any help will be appreciated... Thanks

[HELP] Error message during installation / Message d'erreur pendant l'installation

FR:
Bonjour, aujourd'hui j'ai voulu installer la version d'essei d'adobe After effect, mais, à la fin du téléchargement, j'ai se message d'erreur:
Erreur lors de l'extraction du programme d'installation du produit (erreur 101); Vérifiez l'espace disque sur votre système et essayez de relancer le téléchargement du produit.
Mais se que je ne comprend pas, c'est qu'il me reste 59,2 Go d'espace disque libre.
Pouvez-vous m'aidez svp.
EN:
Hello, today I wanted to install the version of essei Adobe After Effects, but at the end of the download, I have error message:
Error when extracting the installer of the product (error 101); Check disk space on your system and try to restart the download of the product.
But I do not understand is that I have 59.2 GB of free disk space.
Can you help me please.
Cordialement,
DJJulien71
[email protected]

DJ_Julien71 wrote:
...at the end of the download, I have error message:
Error when extracting the installer of the product (error 101); Check disk space on your system and try to restart the download of the product.
But I do not understand is that I have 59.2 GB of free disk space.
Did you do what the error message told you to do? Did you restart the download? You don't say anything about it.

ITunes error message on installation

whenever I try and install iTunes, an error message comes up:
there is a problem with this windows installer package. a program required required for this install to complete could not be run. please contact your support personnel or package vendor.
can anyone help with this?
thanks.

The response to "Echo %appadata%" should be
C:\Users\UserName\AppData\Roaming
A space in the user name shouldn't be a problem, but creating a new user may fix the problem because it will create the account with default registry settings which will hopefully have the missing %appdata% information.
If you want to check on this before creating the new user, just for curiosity's sake, check the following Registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\Exp lorer\Shell Folders and check the value for AppData in the right hand pane. If it's missing, then that would explain the problem. It should be as listed above, substituting the UserName with the folder name for the user under Users.
Also check the key
HKCU\Software\Microsoft\Windows\CurrentVersion\Exp lorer\User Shell Folders
The value of this key should be
%USERPROFILE%\AppData\Roaming
More keys to check:
HKCU\Volatile Environement (1)
HKU\.DEFAULT\Software\Microsoft\Windows\CurrentVer sion\Explorer\User Shell Folders (2)
HKU\Sxxxxx\Software\Microsoft\Windows\CurrentVersi on\Explorer\User Shell Folders (2)
HKU\Sxxxxx\Volatile Environement (1)
The values in (1) should have the full path spelled out, the values in (2) should use the %USERPROFILE% variable in the path. If the value under HKU\.DEFAULT is missing or bad, then creating a new user probably won't work either. If that value is missing, then I would recommend a clean reinstall of Windows because there is no telling what else is messed up also.

C++ 2012 package (11.0.50727) & error message during installation printer software

Hello to you all,
I've recently bought a new laptop for my daughter (a HP Pavilion Touch Smart 11).
When I try to install the software needed for installation for the printer (HP J6410) I get the following error.
C:\Users\<username>\AppData\Local-\Temp\7zS46SD\Setup\de..
Now, I've already tried pretty much about everything. Even a full factory recovery, installing all of the needed updates, after that upgrading to windows 8.1, installing of the updates for that OS version too, and then trying to install the software again.
No succes, but the more I try, the more I'm convinced the problem might lay in the C++ 2012 redistributable package (version 11.0.50727). This is why.
I've got more laptops here at home. The one I have for my own is a HP 15 Notebook and has Windows 8.1 installed on it as well. Now here's the funny thing.
I managed to install the software on my own laptop (the HP 15, with an Intel processor) but no succes on the laptop for my daughter (the HP 11 TS, with an AMD processor).
When I looked at the installed C++ packages I noticed that the laptop for my daugther has the C++ 2012 package installed, and my own doesn't. So that's why I think the problem must lay there. Also because on this page (http://www.freewarefiles.com/Microsoft-Visual-C-2012-Redistributable-x64_program_78882.html)
it is said that it supports Windows 8 (which was pre-installed on the laptop for my daughter), but Windows 8.1 isn't mentioned.
I would be very thankfull if someone could help me resolving this issue.
(Note: I've tried to get help on the support forum of HP. More information on how I resolved the issue, in May 2014, on my own laptop, and how it is related to C++, can be found here: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officet-J6410-won-t-install-under-Windows-8-1-64-bit/m-p/3935396#M142540
More information on what I've done so far on the laptop of my daughter this month, September 2014, can be found here: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/HP-OfficeJet-J6410-won-t-install-under-Windows-8-amp-Windows/m-p/4526450#M161696.
Please do read them. I've already tried so many things, and I can't get the issue resolved. Even though I'm pretty sure I must be so close to resolving this issue.)
I most thankfully await your response(s).
Update (30-9-2014, 23:14):
I've written above that I tried to re-install the printer. With the original CD, and also the software one can download on the HP site (OJ_AIO_J6400_Full_Win_WW_140_408-4.exe). Now, it seemed a good idea do uninstall the software.
Yep, you guess it .. I made my problem worse.
When I tried to uninstall it with the C:\Users\<username>\AppData\Local\Temp\7zS6A01\util\ccc\uninstall.exe I got the following message at reboot. It says you have to click OK to terminate the program, but it doesn't await your response. It's there,
for a glimpse of a moment, and disappears. It said (in Dutch):
'De instructie op .....xe01 verwijst naar geheugen op 0x00000000. Een lees- of schrijfbewerking op het geheugen is mislukt. read
Klik op OK als u het programma wilt beëindigen'.
It looks very similar to the error message here: http://fud.community.services.support.microsoft.com/Fud/FileDownloadHandler.ashx?fid=8d18c288-aeb4-41c0-983f-6798cfa178a0 that I found in this topic: http://answers.microsoft.com/nl-nl/windows/forum/windows8_1-windows_install/windows-81-afsluitfout-explorerexe-0xe06640b9/0c64290f-2e0b-47fc-a38a-adb9ceb5a5ac
Now, after this (that is: the uninstalling op the printer software) I returned to a system recovery point I made before the installation of the HP printer software. So that can not be the problem anymore. However, the error message kept returning.
So I'm pretty much convinced it must have something to do with explorer.exe, the msi-program, compatability-issues and the C++ packages. How to proceed now from here?
Should I uninstall the C++ 2012 package?If so, can I do that safely? Do I need a newer version of the C++ packages? Where can I find it?
Please, help me out? I most thankfully await your answer(s).

Hello to you all,
I've recently bought a new laptop for my daughter (a HP Pavilion Touch Smart 11).
When I try to install the software needed for installation for the printer (HP J6410) I get the following error.
C:\Users\<username>\AppData\Local-\Temp\7zS46SD\Setup\de..
Now, I've already tried pretty much about everything. Even a full factory recovery, installing all of the needed updates, after that upgrading to windows 8.1, installing of the updates for that OS version too, and then trying to install the software again.
No succes, but the more I try, the more I'm convinced the problem might lay in the C++ 2012 redistributable package (version 11.0.50727). This is why.
I've got more laptops here at home. The one I have for my own is a HP 15 Notebook and has Windows 8.1 installed on it as well. Now here's the funny thing.
I managed to install the software on my own laptop (the HP 15, with an Intel processor) but no succes on the laptop for my daughter (the HP 11 TS, with an AMD processor).
When I looked at the installed C++ packages I noticed that the laptop for my daugther has the C++ 2012 package installed, and my own doesn't. So that's why I think the problem must lay there. Also because on this page (http://www.freewarefiles.com/Microsoft-Visual-C-2012-Redistributable-x64_program_78882.html)
it is said that it supports Windows 8 (which was pre-installed on the laptop for my daughter), but Windows 8.1 isn't mentioned.
I would be very thankfull if someone could help me resolving this issue.
(Note: I've tried to get help on the support forum of HP. More information on how I resolved the issue, in May 2014, on my own laptop, and how it is related to C++, can be found here: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officet-J6410-won-t-install-under-Windows-8-1-64-bit/m-p/3935396#M142540
More information on what I've done so far on the laptop of my daughter this month, September 2014, can be found here: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/HP-OfficeJet-J6410-won-t-install-under-Windows-8-amp-Windows/m-p/4526450#M161696.
Please do read them. I've already tried so many things, and I can't get the issue resolved. Even though I'm pretty sure I must be so close to resolving this issue.)
I most thankfully await your response(s).
Update (30-9-2014, 23:14):
I've written above that I tried to re-install the printer. With the original CD, and also the software one can download on the HP site (OJ_AIO_J6400_Full_Win_WW_140_408-4.exe). Now, it seemed a good idea do uninstall the software.
Yep, you guess it .. I made my problem worse.
When I tried to uninstall it with the C:\Users\<username>\AppData\Local\Temp\7zS6A01\util\ccc\uninstall.exe I got the following message at reboot. It says you have to click OK to terminate the program, but it doesn't await your response. It's there,
for a glimpse of a moment, and disappears. It said (in Dutch):
'De instructie op .....xe01 verwijst naar geheugen op 0x00000000. Een lees- of schrijfbewerking op het geheugen is mislukt. read
Klik op OK als u het programma wilt beëindigen'.
It looks very similar to the error message here: http://fud.community.services.support.microsoft.com/Fud/FileDownloadHandler.ashx?fid=8d18c288-aeb4-41c0-983f-6798cfa178a0 that I found in this topic: http://answers.microsoft.com/nl-nl/windows/forum/windows8_1-windows_install/windows-81-afsluitfout-explorerexe-0xe06640b9/0c64290f-2e0b-47fc-a38a-adb9ceb5a5ac
Now, after this (that is: the uninstalling op the printer software) I returned to a system recovery point I made before the installation of the HP printer software. So that can not be the problem anymore. However, the error message kept returning.
So I'm pretty much convinced it must have something to do with explorer.exe, the msi-program, compatability-issues and the C++ packages. How to proceed now from here?
Should I uninstall the C++ 2012 package?If so, can I do that safely? Do I need a newer version of the C++ packages? Where can I find it?
Please, help me out? I most thankfully await your answer(s).

Can't connect to X11 Windows ............ error message during installation

ok, so i searched through the long list of messages on the forum and still don't have an answer. I am using a PC with redhat FC4 installed and trying to install Oracle 9 on the same PC. I tried to export my DISPLAY=hostname:0.0 and export DISPLAY=127.0.0.1:0.0 and neither worked.
From the replies on the same error message, i gather that i do not need to run
xhost +
because i am on the same machine.
What else can i check to get rid of this frustrating message ?
Most replies on the erorr messages were from a few years ago as well.
Thanks

I solved my problem. It might be useful for other redhat FC users as well.
I changed the default terminal to be an Xwindows terminal instead of the standard terminal. You can do that by clicking on "Desktop", "Preferences" or "More Preferences" and configuring your default terminal to be Xwindows.
I was able to start installer WITHOUT exporting my display or any other command to get display going.
The installer did complain about some font messages, but apparently it didn't pose a problem.
BTW, i got Oracle 9.2.0.1 running on Redhat FC 4 using installation instructions i easily found on google. You need to use an old version of GCC (only during installation of software) and JRE (1.3.1_15); but it works. It will only be my "play at home" database. Probably not recommended for a production database.

GETTING ERROR MESSAGE DURING INSTALLATION

HI,
i am trying to install oracle 10g database 10.2.0 but getting error message
ORA-12154: TNS COULD NOT RESOLVE THE CONNECT IDENTIFIER SPECIFIED. operating system windows xp.
can anybody tell me whats that and how to resolve?
thanks
Edited by: Hi FRNzzz!! on Apr 2, 2010 11:34 AM

hi;
Please check:
The specified item was not found.
oracle 10g installation ora 12154 i really need help anyone
Hope it helps
Regard
Helios

Error message during installation ... com.installshield.wizard.Wizard

While installing any java tool from Sun (i.e., netBeans, studio8.1) I constantly get the error message 'Cannot utilize class com.installshield.wizard.Wizard'
Does anyone know the reason for this message? Any help will be very much appreciated.
Kemal Atavi

DJ_Julien71 wrote:
...at the end of the download, I have error message:
Error when extracting the installer of the product (error 101); Check disk space on your system and try to restart the download of the product.
But I do not understand is that I have 59.2 GB of free disk space.
Did you do what the error message told you to do? Did you restart the download? You don't say anything about it.

Error message during installation and after reboot. I can't continue with installation.

Error message while installing 10.6.3. And even after reboot I can't do anything anymore same message pops up after a few minutes. How can I get new version installed without error message and it ejecting the Installation Cd? Tried booting from external drive since the one on my Mac is not working. Any tips on how to proceed?

Installing or updating Snow Leopard:
http://manuals.info.apple.com/en_US/Snow_Leopard_Installation_Instructions.pdf

Error message during Installation and deletion

Hi,
I already have Labview 6.0 BasePackage installed on my Windows NT 4.0 workstation. There are some features however that I would like to add. When I try to uninstall the Lab View 6.0, I get this error message:
"Error applying transforms. Verify that the specified transform paths are valid". I am using the Installation CD Rom and the CD works fine on any other Windows NT workstations.
Please advise.
Regards, Yasamin Dayyani

Yasamin,
Please refer to KnowledgeBase 27L8BB2L: Error Applying Transforms when Uninstalling LabVIEW for a resolution to this issue.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

Error message during installation

I am starting the boot process with the boot diskette, walked through the Config Assistant w/ a full scan, saved it, F2 to continue. First I tried an autoboot w/ the same error message and tried it w/o the autoboot w/ same message.
The error message is stating:
error: bad resource type 0x8
The root filesystem is not mounted and the configuration assistant has exited prematurely, booting is unlikely to succeed. ctrl-alt-del may be used to reset machine.
Failover to boot interpreter - type ctrl-D to resume boot.
>
Pressed ctrl-D and process was stopped w/ error message.
boot: source: open of '/etc/bootrc' failed
>
Regards,
Darren

I have a different morther board now. Fry's Electronics sometimes has bad equipment. I am now using an ASUS P4B266 which is on the HCL. The bad one was an ASUS P4B(x), I can not remember what the last letter was. I know it was on the HCL.
We also detemined the CD's where bad and we ordered new ones. What I understand from Sun support is the error message typically means bad media or incompatible hardware.
What we are having problems with now is determining what command we need to use to mount an Adtron SDDS removable SCSI drive. We know the mounting points are incorrect and can not figure out how to disable the automounting taking place when a PC card is inserted into the slot. A file manager window appears stating a unnamed_rmdisk. The only thing we can do to the PC card is read/write data to/from it. We can not format the PC card with any type of file system. If you have any advise, please pass it along. Sun support is working on it, but it as been over two weeks now with no results.
Regards,
FAE2

HT203322 Still having issues with installing Yosemite after deleting "Backups.backupdb" on the internal hard drive. I have restarted multiple times and cannot find any other back up files, yet I still receive the same error message during installation.

I am using a 2011 iMac on 10.6.8. I recently downloaded the Yosemite upgrade and during the installation process ran into the "this disk is used for time machine backups". I ejected the external drive I use for time machine backups and turned off time machine in the application. I then followed the instructions of the help article (OS X: Cannot install on a volume used by Time Machine for backups - Apple Support) by moving the folder "Backups.backupdb" that I was able to find on my internal hard drive to the trash. I have restarted several times after completing this process. I am still running into the same error during the installation process. I have searched the hard drive for any other backups and I cannot find any. I searched the hard drive using the command cmd-shift-g and searched for “backups.backupdb” and was unable to find any folders or files. Any other suggestions?

I have resolved the problem - I did not actually delete the "backups.backupdb" folder, I only deleted the contents of the folder. I must have only searched on the user account for the folder after I thought I had deleted it. Thank you for the assistance everyone and I apologize for the inconvenience!

Windows 8.1 Update from Windows 8 Giving Error Message During Installation

I was instructed to use a generic Windows 8.1 key, and then change it to my Windows 8 key after installation. But, at either 94% or 96%, it gives me the following error during the installation:
Windows 8.1 Update has failed.
I have tried everything online and can't find anyway around it. In the meantime, all of my Windows Store apps are broken, and thus I can't update from the Windows Store. I have the correct ISO files from http://microsoft.com/ and I even have the option to
install Windows 8.1 from a program that was automatically added to the "Classic Start Menu" that was presumably placed by Windows automatically. No matter how I attempt to install it, it fails. I would really appreciate it if someone would help me
soon.
Thank you,
Ben

Hi,
I was instructed to use a generic Windows 8.1 key, and then change it to my Windows 8 key after installation.
What's the meaning of it?
Did you update from Windows 8 operating system from Window store?
Please locate to %WINDIR%\Panther, see if there is any clue in the setupact.log and setuperr.log.
Meanwhile, please refresh or reset your original Windows 8 system to ensure it's complete and correct.
Then retry to update to Windows 8.1 from Windows Store.
Best regards,
Karen Hu
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

ITunes error message during installation, help?

Similar Messages

Maybe you are looking for