ITunes Error Message. Still need help. Please.

I still haven't been able to use my ITunes for about two months. I need help to fix the problem. Here's what it says when I try to start ITunes:
Microsoft Visual C+ + runtime library
Runtime Error!
Program: C:\program files\itunes\itunes.exe
This application has requested to terminate in an unusual way. Please contact the application’s support team for more information.
If anyone can help me with this I would greatly, greatly appreciate it. Thanks.
Windows XP

Have you tried un-installing iTunes, downloading the program again from Apple, and re-installing?
It's always worth a try, as it should help you clear off anything causing the problem and start again.

Similar Messages

TS3694 I was doing the latest update (7) and when it got to exporting files it gave me error message 3194, need help please

I was doing the latest update to my iphone4. when it got to exporting files it gave me error 3194, can anyone help?

Error -1 is not mentioned in this article about error messages during a restore process: http://support.apple.com/kb/TS3694
This one comes close:
The device could not be restored. An internal error occurred, or Error 3200: This indicates a network-connectivity or traffic issue. If you see this error, wait an hour or more and try again.
You may also check your security software settings, to make sure that iTunes can contact Apple servers during this process: iTunes for Windows: Troubleshooting security software issues

Hello I Download Adobe Photoshop CC 2014 Last Night i INSTALLED it But it Crashes in 30-40 Sec After i Launch the Product Without Any Error Message I Need Help Can You Resolve This Problem i Tried Creative Cloud Sign Out Nd Sign iN But iT DidnT ReSolve My

Hello I Download Adobe Photoshop CC 2014 Last Night
i INSTALLED it But it Crashes in 30-40 Sec After i Launch the Product Without Any Error Message
I Need Help Can You Resolve This Problem

Lotfi are you receiving any error messages during the installation? I would recommend reviewing your installation logs for errors. Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files. You are welcome to post any specific errors you discover to this discussion.

ITunes installation error message. Need help!

I am receiving the following error message when downloading iTunes 10.5 and newer. A network error occurred while attempting to read from the file c:\\windows\installer\iTunes.msi

Crikey.
C:\\program'files\iTunes\iTunes.resources\pt.lpro\duplicatesplacard.nb\objects.x ib
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Problems with iPhone 3G Activation , Error Message (-50), Need HELP!!!!!!!!

Hi,
I bought the iphone 3G yesterday through Virgin Mobile. I was told to activate my iphone I need to sync it with iTunes.
I plugged in my iPhone and it try to sync for a while then an error message pops up. (*We could not complete your iTunes Store request. An unknown error occured. (-50).There was an error in iTumes store. Please try again later*.)
I've tried several things, reinstalling iTunes, change the options in my internet browser (Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.5) Gecko/2008120122 Firefox/3.0.5), turn off my anti-virus software. But the problem still occur.
I can access iTunes store and my playlists etc, but when I click on Sign-in and then click on create new account the same error message pops up again.
I've tried to run diagnostics on iTumes. It says that secure link to iTunes store failed. I've passed all connectivity and sync test. Below is the details,
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
LENOVO 0658A22
iTunes 8.0.2.20
QuickTime 7.5.5
FairPlay 1.1.11
CD Driver 2.0.7.5
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.1.2.7
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number D763986FFBC26648
Current user is an administrator.
The current local date and time is 2009-01-16 00:15:20.
iTunes is not running in safe mode.
Video Display Information
Mobile Intel(R) 945GM Express Chipset Family
Mobile Intel(R) 945GM Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {CF15D5A8-9110-4EEF-9AFC-3CC17DD113AE}
Description: Intel(R) PRO/Wireless 3945ABG Network Connection - Packet Scheduler Miniport
IP Address: 192.168.1.4
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Fri Jan 16 00:09:58 2009
Lease Expires: Fri Jan 16 01:09:58 2009
DNS Servers: 192.168.1.1
192.168.1.1
Adapter Name: {F7421B4F-64B7-47A9-BFDD-A004DE5F7FCB}
Description: Broadcom NetXtreme Gigabit Ethernet - Packet Scheduler Miniport
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway:
DHCP Enabled: Yes
DHCP Server: 255.255.255.255
Lease Obtained: Fri Nov 07 17:38:56 2008
Lease Expires: Tue Jan 19 13:14:07 2038
DNS Servers:
Active Connection: LAN 連線
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Disabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was unsuccessful.
An unknown error occurred (-50).
Secure connection attempt to iPhone activation server unsuccessful.
An unknown error occurred (-50).
Last successful store access was 2009-01-16 00:10:18.
** iPod/iPhone Connectivity Tests **
iPodService 8.0.2.20 is currently running.
iTunesHelper 8.0.2.20 is currently running.
Apple Mobile Device service 2.12.33.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
iPhone, running firmware version 2.2
Serial Number: 878514GXY7K
** iPhone/iPod Touch Sync Tests **
Sync tests completed successfully.
Anyone have an idea of what's happening please let me know. I really want to start using my iphone.
Thanks heaps
Bec

No need to SHOUT. The cable is the one used to connect your iPhone to your PC. Suggest getting another one.
The problem may be that you're using USB to connect to the internet. It's too slow and will cause problems when you have other high speed USB connections. Use an Ethernet connection to your modem/router. For additional troubleshooting, see these Apple support articles:
http://support.apple.com/kb/TS1495
http://www.apple.com/support/iphone/troubleshooting/
Message was edited by: modular747

ITunes error message saying needs Quicktime 7.5.5 or later.

I have installed the latest ITunes but it comes up with error message saying it needs Quicktime 7.5.5 or later. I have got Quicktime 7.5 installed but when I try to go to Apple website to upgrade it just says it is built into OS X and therefore I cant see anything to allow me to upgrade. So stuck! Any suggestions?

Let's try installing a QuickTime 7.7 for Leopard using a .dmg installer downloaded from the Apple website:
http://support.apple.com/kb/DL761

Question-still need help please

After encountering an odd problem yesterday while uploading photos that forced me to manually shut down the computer, I could not reboot. I ran the disk utility, and it indicated repairs were made. But it still would not reboot. So I reinstalled Mac OS X, and now the computer will not accept my user name/password. Any suggestions on what I'm doing right or what I might do differently?
Thanks,
John

You may have to start the computer from the Installer boot disc and choose
from the menu options (not reinstall, again) to reset the Admin password.
It could be the same one you had before, if you like.
Did you do an Archive and Install -or- an Erase and Install?
How full is the hard disk drive? After it seems OK for awhile
you may decide if anything of value is in the old system and
if not, you could delete it. You may have to start up in SafeBoot
and run the built-in Disk Utility's "repair disk permissions" and
restart; there are some things other things you can do to help it.
Hard saying why the computer acted up. If the drive is getting
more than 70% full, you should be looking to archive files off
the machine's hard disk drive and then reduce its load.
How long have you had this computer, and what is its configuration?
PS: it would have been nice if you could have started a new
thread earlier on and kept the topic of your computer in there.
I see an earlier thread where the error message was a launchd
message, and that may have been helpful to know all the story.
re: http://discussions.apple.com/message.jspa?messageID=7178754#7178754
edited.

New ipod passcode locked out. tried other steps still need help please

Hi passcode locked out of daughters new ipod. we backed up on computer this morning or rather it automatically backed up when plugged into itunes as directed from other posts i was reading. Then I tried to restore but it said I needed to turn off "find my ipod" which I cant because I need the passcode to get to settings. I then tried the home button power off but when i get to itunes restore ipod it tells me I need passcode. pleae help what step am I missing? go s l o w l y please I am new to mac after 20 years on pc and need help in steps that are not intuitive to me.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

ITunes error message during installation, help?

Every time I go to install iTunes, it stops in the middle of the installation and gives me this message. "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personal or package vendor." However it does not tell what is missing or how to fix it. What's going on here?

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Plug in error message - I need help

I'm not the most proficient with computers and new to ibook. I often get the following error message and can't get the content I'm after:
This page "blah, blah blah" has content of an unspecified MIME type. Because you don’t have a plug-in installed for this MIME type, this content can’t be displayed.
This is probably elementary. Could you provide me with what I need to do to get the content I'm after?
Thanks,

Update or install your Quicktime player or its plugins. http://www.apple.com/quicktime/download/mac.html

Error message #2060: need help and/or suggestions to resolve

I keep getting an "ActionScript" error message #2060 and do not know how to get it corrected or resolved. Any and all help here will be greatly appreciated!!! I am running Windows 7, and use Internet Explorer, Google Chrome and Firefox. The message always appears related to Skype. Here is the error message:
SecurityError: Error #2060: Security sandbox violation: ExternalInterface callerhttps://secure.flashtalking.com/xre/84/849472/749797/swf/Hubzu_SL_Local_728x90_v2.swf cannot access https://a.rfihub.com/sed?w=728&h=90&co=sej%3Afalse%2CexId%3A3277635791502883766%2Cuuid%3A9 71370146072240370%2CserverId%3Aewr-109%2CscoreMicroClicks%3A1056%2Coptimize%3Afalse%2Cbt% 3 A1403214695320%2Curl%3Aewr-109.ewr-rtb1.rfihub.net%2CscoreMicroConversions%3A0%2CnewUser% 3 Afalse%2CbB%3Atrue%2CuV%3A0%2Cmt%3A1%2CuG%3A0&ep=0.5&ri=433a0f3421e16e4b40226fc1d9d6444b& r s=skype.comskype.com&ai=680085&rt=266003&re=20789&ug=&pv=0&ra=2146902100.474938889062276& r b=345&ca=&rc=13.0&rd=&ua=&ub=&uc=&ud=&ue=&pa=ppre2146902072783&pb=&pc=&pd=&pg=&ct=1403214 6 90210&di=&app=0&pe=https%3A%2F%2Fstatic.skypeassets.com%2Fadserver%2FAdLoader.html%3Fvers i on%3D1.54.2&pf=.
at flash.external::ExternalInterface$/_initJS()
at flash.external::ExternalInterface$/call()
at com.flashtalking::FT/init()
at com.flashtalking::FT/set z_dummy()
at Hubzu_SL_Local_728x90_v2_fla::MainTimeline/__setProp_myFT_Scene1_adSetup_0()
at Hubzu_SL_Local_728x90_v2_fla::MainTimeline()
Thanks in advance.

Here is the exact message that I get:
SecurityError: Error #2060: Security sandbox violation: ExternalInterface caller http://s.moatads.com/swf/MessageSenderV2.swf cannot access http://www.myforecast.com/bin/alert_detail.m?city=12631&metric=false&messageID=161011COZ01 037,161011COZ01837,161011COZ00437,161544COZ01037,161544COZ01837,161544COZ00437,162152COZ00 937,162152COZ01037,162152COZ00437,170558COZ00937,170558COZ01037,170558COZ01837,170558COZ00 437,170848COZ00937,170848COZ01037,170848COZ01837,170848COZ00437,171722COZ00937,171722COZ01 037,171722COZ01837,171722COZ00337,171722COZ00437,172131COZ00937,172131COZ01037,172131COZ00 337,180231COZ08237,180542COZ00937,180542COZ01037,180542COZ01837,180542COZ00337,180913COZ00 937,180913COZ01037,180913COZ01737,180913COZ01837,180913COZ00337,181001COZ05837,181152COZ00 937,181152COZ01037,181152COZ01737,181152COZ01837,181152COZ00337.
at flash.external::ExternalInterface$/_initJS()
at flash.external::ExternalInterface$/call()
at MessageSenderV2_fla::MainTimeline/frame1()

Earlier Post - still need help please!

Earlier I said I was getting the message (The document “7/11Diverticulitis.pdf” could not be opened. Acrobat cannot open files in the “Adobe PDF document” format). Several people made suggestions. I tried all of them. #1 I renamed the files and tried. #2 I made sure I selected acrobat 9 as the application I wanted to use while opening a document. #3 I tried to delete and reinstall. I cannot install it for some reason the process does not auto install from my CD? Now what, I have already dumped my prior Adobe Acrobat 9 pro into the trash and emptied it! I am so confused. I use alot of pdf files as I have gone paperless. Before I created and read them with ease. Why would this happen just because I upgraded to a new computer. Again I am on OSXversion 10.6.8 Thanks for anything you can do to help!!

You may have to start the computer from the Installer boot disc and choose
from the menu options (not reinstall, again) to reset the Admin password.
It could be the same one you had before, if you like.
Did you do an Archive and Install -or- an Erase and Install?
How full is the hard disk drive? After it seems OK for awhile
you may decide if anything of value is in the old system and
if not, you could delete it. You may have to start up in SafeBoot
and run the built-in Disk Utility's "repair disk permissions" and
restart; there are some things other things you can do to help it.
Hard saying why the computer acted up. If the drive is getting
more than 70% full, you should be looking to archive files off
the machine's hard disk drive and then reduce its load.
How long have you had this computer, and what is its configuration?
PS: it would have been nice if you could have started a new
thread earlier on and kept the topic of your computer in there.
I see an earlier thread where the error message was a launchd
message, and that may have been helpful to know all the story.
re: http://discussions.apple.com/message.jspa?messageID=7178754#7178754
edited.

Application Error Message. Need help identifying problem.

From time to time i get the following error message and I'm forced to shut Illustrator down:
Illustrator.exe - Application Error
The instruction at 0x0034d17c referenced memory at 0x00000014. The memory could not be read. Click on OK to terminate the program
Does anyone know what this means? This also occurs sometimes when I'm trying to select a font... for example Impact.. which isn't visible. Is the font corrupt? If so how do I go about obtaining a replacement? Whats going on here?
Thanks

Try either fixing permissions or removing the user cache using Onyx or Applejack.

Windows XP, Itunes error on startup, NEED HELP!!!

Whenever i click on iTunes i get this error...
[img]http://img301.imageshack.us/img301/2160/itunesyi3.th.jpg[/img]
i cant even open itunes....
I tried reinstalling, and restarting and the works.... if anyone can help i would be AWESOMELY thankfull!!!!

i can't see the message properly in the image. is it giving you a 0x666D743F, by any chance?

Hi my iPhone is a 3GS and I've tried now to update it for 4.3.5 to 5.0.1 but when its done downloading it comes up with your iPhone is not eligible for this build (i think this is the error message) i need help

plz help me guys

Most often due two one of the following.
1 Install current version of iTunes, older Macintosh Systems will not support current version of iTunes, make sure you have current version of iTunes.
Or
2 Your computer Hosts file is blocking Apple from communicating with iTunes. To determine this, search Hosts on computer, then open Hosts file with a word processor. If the Hosts file contains this, gs.apple.com it is blocking Apple. This line with its number must be inactivated (removing it works). A stock Hosts file does not contain this or block Apple.
Here is Apple information on this problem:
"This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw."

Can't open or send text messages. Need help please.

My sprint 700p will not let me access my messages. I can open the messaging app. but if i try to open the message the phone resets itself. I tried to see if i could recieve a text but when I get a incoming text the phone resets itself again. I've tried hard and soft resets still the same. Right now I'm willing to try anything reasonable to restore my texting capablities.
Post relates to: Treo 700p (Sprint)

Whenever you preform the hard reset do you restore your data back to the device?
Try hard resetting your device and then see if the messaging application resets when someone sends you a message if it doesn't then it is the messaging application that has become corrupted.
The best method of getting rid of this problem is to locate your backup folder and remove it.
The folder is located in C:/program files/palm/[username]
The username folder is going to be a variation of your hotsync ID. (You can find this in Palm desktop and the hotsync application of your device)
Inside that folder is a folder that says backup..rename this to backup.old once it is renamed then hotsync your other data back to the device.

ITunes Error Message. Still need help. Please.

Similar Messages

Maybe you are looking for