ITunes error message - "video format is not supported by the iPad" My video is mp4, mpeg-4.

When syncing my iPad 2....  Why do I get this iTunes error message? "video format is not supported by the iPad"
My video is mp4, another is mpeg-4.
I thought the iPad 2 could play almost any format.

Must conform to these specs:
Video formats supported: H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
Or download an alternate video player,such as avplayerhd.

Similar Messages

  • Error message: this computer is not supported by the system recovery media.

    I replaced a bad samasung hard drive in my Pavilion dv6z 3200 with a Seagate Momentus XT 750 GB 7200RPM SATA 6Gb/s 32 MB Cache 2.5 Inch Solid State Hybrid Drive ST750LX003 and when trying to restore Windows 7 64 bit OS get the error message "this computer is not supported by the system recovery media"

    Is the new hdd at least as large a capacity as the original? Can be larger capacity, but sometimes smaller will cause error.
    Enter BIOS by tapping F10 key. Is all system info intact/complete?
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • I cannot load videos purchased from iTunes onto my iPhone 4. Says video format is not supported.

    I have most recent version OSX, iTunes and my iPhone 4 is up-to-date on software as well.
    I just purchased, for my son, The Adventures of Chuck and Friends from the iTunes store. Downloaded the first season and it plays fine on computer. However I get a message that it was not copied onto the iPhone 4 because the video format is not supported by the iPhone. I have updated the software on the iPhone 4 and still get this message. Any suggestions? Thanks in advance.

    is this something new then? 
    From the apple site:
    Listen to audiobooks
    You can listen to audiobooks purchased from the iTunes Store or the Audible website.
    Audiobooks purchased from the iTunes Store can be played on up to five computers at a time. The computers must be authorized to play purchases from the iTunes Store. (You can’t play these files on a sixth computer until you deauthorize one of the already authorized computers.)
    Audiobooks purchased from the Audible website can be downloaded to up to three computers at a time. The computers must be authorized to play purchases from Audible.
    which is confusing because I am still having this problem, I can't find it on my laptop...

  • HT4623 When I plug my ipad to itunes i get the error message that it is not supported and I have to go to itunes and get itunes re-installed?  i never had this problem before.  if i do this will i loose all my files, music, etc?

    When I plug me ipad to itunes i get the error message that it is not supported and that i have to go to itunes and get "itunes installer" and re-install.  if i do this will i loose my files and music?

    No, you should not lose anything.

  • Upload Error message: HTTPS protocol is not supported

    Hi,
       Whenever I do a quick par upload i'm getting an 'Operation failed' message to check sap-plugin.log.
       Log says
    Upload Error message: HTTPS protocol is not supported, please ensure this server is not using HTTPS. My webdynpro applications are getting deployed without any issues.
         How to resolve this?
    Thanks
    Sumathi

    Hi Sumathi,
    As there are often problems with the Quick PAR Upload reported, I would suggest to use the "normal" PAR upload from the icon tray (you have to activate the portal icons in the icon tray). That is almost that "quick" (one or two clicks more needed, we don't talk about more than a second) and - it works (it least it should, and at least it works in most cases even if the Quick PAR Upload fails).
    Hope it helps
    Detlev

  • I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "

    I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "
    THis is means they are not charging on a 30 pin cable and the touch won't work in my Apple iPod dock - no audio out or charge. Have re powered both devices to no avail am wondering if the iOS version is the problem
    Help!

    If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
    This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
    Is this what you bought?
    You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be.

  • I purchased Elements 13.  When I tried to install I get the error message that it is not supported by Vista.  Now what do I do?

    I purchased Elements 13.  When I tried to install it I get the error message that it is not supported by Vista.  What do I do now?

    If you can't install Windows 7 or higher or get a new computer with Windows 7 or higher, you won't be able to run Photoshop Elements 13.
    There are many inexpensive refurbished or "off lease" computers available at very reasonable cost.  Here is one example (scroll down):
    Computers & Tablets, Desktop PCs, All Desktop PCs, Refurbished - Newegg.com

  • Fidelity active trader give me an error message your browser is not supported. Can you fix.

    I use active trader pro and have an error message that browser is not supported in when I do research and some other areas.
    How can I fix this is there an up grade?

    hello kmore, you'd have to contact fidelity's support about that issue...

  • I have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this?

    i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this

    Try downloading the trial. It ought to detect that you have a 64-bit system.
    You aren't using Vista, are you? PSE 13 requires at least win 7 and I think a few folks with vista have gotten a similar error message on trying to install it.

  • When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

    When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

    You can try downloading the 64 bit version.  You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

  • When I try to download the windows support software it is coming up with an error message saying I am not connected to the internet but having checked the network diagnostics several times I am definitely connected but it still won't work. Any ideas?

    When I try to download the windows support software it is coming up with an error message saying I am not connected to the internet but having checked the network diagnostics several times I am definitely connected but it still won't work. Any ideas?

    I get a problem like yours. I have a mac mini with 2 hdds the server and hd2 I installed windows 7 and the windows works fine. except it will not allow me to get on the net.  I get error 651.  I can boot back to lion and the internet connection works. I googled and error 651 does seem to show up.  I would like  a work around.

  • After using iTunes Match, 5 songs have a "was not copied because the audio format is not supported by the iPhone".

    After using iTunes Match, 5 songs have a "was not copied because the audio format is not supported by the iPhone".
    I have deleted these songs and downloaded them from iTunes Match (they were "matched" and not "uploaded" files).  However, it still does not work.

    I have the same issue with 8 songs in my library. All are "Matched" and I've tried deleting them and redownloading them from iTunes Match, but they won't play in iTunes or transfer to any of my iDevices.

  • When trying to update my Iphone ios version I got an error message saying I`m not connected to the internet even though I`m connected

    Hi
    when trying to update my Iphone ios version I got an error message saying I`m not connected to the internet even though I`m connected
    thanks

    Hi there ramerr,
    You may find the troubleshooting steps in the article below helpful.
    iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    -Griff W. 

  • Cant sign into my apple store or my home share. The error message said I was not connected to the internet

    I just bought Apple TV and want to use my PC as home base for my ITunes and home sharing. I up dated Itunes to the current software. When I attempted to sign into the apple store and turn on my home share I receive a error message stating I am not connected to the Internet making the Itune non functional
    This is what the Error message read:
    iTunes could not connect to the iTune Store. An unknown errror occurred 0x80092013

    Hi, Heffy21. 
    Thank you for the question.  This could be related to a simple issue or could result in a complex fix.   Below, you will find the best troubleshooting articles for issues connecting to the iTunes Store.  Be sure to try each step in the articles provided and test the results after each step. 
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Regards,
    Jason H.

  • ERROR: Update mode C is not supported by the extraction API - R3 11

    Hi gurus,
    I just tryed to implement the solution I found at this link:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
    The data source is based on an Infoset on the KONV R/3 Table.
    I setted the AIM delta process and I did all the activities as written in the document.
    The process works if I load data to bw in "full", with "Init without data transfer" and "delta" mode. Of course if I change a Purchase document, it will be posted in the delta queue and then loaded to bw with the next delta load.
    The "initialize delta process" (with data) doesen't work and returns the following error:
    Update mode C is not supported by the extraction API
    the error code is R3 11.
    have you any idea about it???
    Thanks!!!
    Regards!
    Matteo

    Hi,
    for me it sounds quite simple. It is that the update mode 'C' get flagged as 'not allowed' for this extractor. Did you check with rsa3? I guess you will get the same error message. May be you can start debugging in rsa3 to find the place where the update mode gets checked.
    Anyway, it shouldn't be a issue as you have a workaround. May be you should raise a error message at sap because of this.
    regards
    Siggi

Maybe you are looking for

  • Error while calling a stored procedure with OUT parameter.

    Hi, I am trying to call a Stored Procedure(SP) with an OUT parameter(Ref Cursor) from a third party tool. It is called using OLE-DB Data provider. In one database the procedure works fine but when I change the database the procedure call is giving fo

  • I can't print scan or fax from my HP OFFICEJET 4620 on the microsoft 8.1 operating system

    Help! I am getting the error message scanner unreachable when trying to print or fax continue to get error messages. The disk included with the printer is not campatible with the 8.1operating system. I went to HP for a driver to fix this problem but 

  • Pages problem - Only two fonts available in the Fonts window.

    Hey there, Would love some help on this one. I am working in pages and when I bring up the Fonts window there are only two choices available (either with some text/object selected or not) - Helvetica 12.0 pt and Helvetica 9.0 pt. That's it. Nothing e

  • .ai overload in Indesign (CS5.5)

    We have an InDesign document that is comprised of a few dozen Illustrator line drawings (garments)  that have been built individually using layers and are viewed/imported in InDesign through import options and turning off/on said individual layers. T

  • To to get new Photos to not open automatically when I plug in iphone/ipad

    Hi, Photos is probably better than iPhoto for personal images, BUT: I need to make the new Photos app not open automatically every time I plug in an iPhone or iPad or camera into the computer.  I take a lot of photos for work and I import those throu