ITunes error message while importing a file

I'm getting this error message when I try to add some files to my iTunes library.
I tried to restart my iMac but the same mesage appear evry file I try.
Not sure what could be the problem, I tworked fine yesterday, and I did not do any update lately.
Thanks for any suggestion.
Thierry
Message was edited by: ThierryR
iMac 2010, iTunes 10.4 and Lion 10.7

MosheCS,
Thanks so much, it fixed it, I'm happy to give you the 10 points
Also to be precised I follow these instructions: http://docs.info.apple.com/article.html?path=Mac/10.5/en/8342.html
A specificly this one:
To apply the same permissions to every item contained in the selected folder or disk, open the Action (gear) menu and choose “Apply to enclosed items.”
Thanks again, I can delete a file without being asked for my password and I'm able to import in iTunes using the feature "add to my library".
Great find
Thierry

Similar Messages

I get an error message while converting the file. you do not have the privilege to make changes. I get this message when I try to import a music CD

I get an error message while converting the file. you do not have the privilege to make changes. I get this message when I try to import a music CD

Hey amba1015,
I found an article that talks about similar error messages in relation to importing an audio CD. Check out the recommended troubleshooting steps in here to see if they help:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/TS1387
Welcome to Apple Support Communities!
Have a good one,
Delgadoh

I keep getting an error code while trying to import a cd to my itunes: Error occurred while converting the file. The disc you are attempting to use is full. removing files and emptying the recycle bin will free up additional space. What does this mean?

I keep getting this error code while trying to import a cd to my itunes: "Error occurred while converting the file. The disc you are attempting to use is full. removing files and emptying the recycle bin will free up additional space." What does this mean?

Well it probably means exactly what it says... How much free space is there on your hard drive where the iTunes Media folder resides? I believe there is also an obscure bug that can occur when software doesn't read the true value of the free space properly, and the workaround is, perversely, to duplicate some content so that with less actual free space the software in question perceives it as more. I've no idea if iTunes is affected by such a bug.
tt2

Error occured while importing .der file in R/3 System

Hi Friends..
I tried to connect R/3 system with portal through SSO concept.
for that I have downloaded (.der) file from portal.
After that I tried to import that file through STRUSTSSO2 transaction in R/3 system, at that time I got
error message like " Error occured while importing"
so I can't able to import that (.der) file into R/3 System.
Please guide me with exact steps.
What should I do?
Thanks
Gowrishankar

Hi Micheal and raghav thanks for your reply.
Yes Micheal already we have installed .der file to other client in the same R/3 System
may be that's why it shows an error?
so what is the solution for this kind of scenarious?
Thanks
Gowrishankar

Getting error message while opening PDF file.

Hello Experts....
I'm getting error message while opening the attached PDF file in mail.
I'm Sending the payslip to mail which is converted into .PDF format.
Where exactly the problem i m not getting.
Please help....

CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
      EXPORTING
        src_spoolid                    = rqident
        no_dialog                      = ' '
       DST_DEVICE                     = out_parms-pdest
      PDF_DESTINATION                =
       get_size_from_format           = out_parms-pdest
      IMPORTING
        pdf_bytecount                  = bytecount
       pdf_spoolid                    = pdfspoolid
      LIST_PAGECOUNT                 =
       btc_jobname                    = jobname
       btc_jobcount                   = jobcount
      TABLES
        pdf                            = out_tab
      EXCEPTIONS
        err_no_abap_spooljob           = 1
        err_no_spooljob                = 2
        err_no_permission              = 3
        err_conv_not_possible          = 4
        err_bad_destdevice             = 5
        user_cancelled                 = 6
        err_spoolerror                 = 7
        err_temseerror                 = 8
        err_btcjob_open_failed         = 9
        err_btcjob_submit_failed       = 10
        err_btcjob_close_failed        = 11.
IF sy-subrc NE 0.
ENDIF.
*CALL FUNCTION 'BAPI_GET_PAYSLIP_PDF'
EXPORTING
   employeenumber       = PERNR-PERNR
   sequencenumber       = '00001'
   payslipvariant       = 'PAYSLIP-PM'
IMPORTING
RETURN               =
PAYSLIP              = PAYSLIP
PDF_FSIZE            =
******************CONVERTING PAYSLIP(XSTRING) TO BINARY FORMAT******
call function 'SCMS_XSTRING_TO_BINARY'
   exporting
     buffer                = payslip
APPEND_TO_TABLE       = ' '
IMPORTING
OUTPUT_LENGTH         =
   tables
     binary_tab            = OUT_TAB.
    check not ( out_tab[] is initial ).
    refresh i_record.
    clear : i_record.
    call function 'QCE1_CONVERT'
      tables
        t_source_tab         = out_tab
        t_target_tab         = i_record
      exceptions
        convert_not_possible = 1
        others               = 2.
    if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
   do.
     i_record = it_attachment_long.
     append i_record.
     shift it_attachment_long left by 255 places.
     if it_attachment_long is initial.
       exit.
     endif.
   enddo.
    select single ltx into subject from t247
               where mnr eq pn-begda+4(2)
                 and spras eq 'EN'.
    condense subject.
    concatenate 'Payslip for the month of' subject pn-begda+0(4)
                              into subject separated by space.
    describe table lt_objbin lines l_att_lines.
    read table lt_objbin index l_att_lines.
    lv_document_data-doc_size = tab_lines * 255 .
    lv_document_data-obj_name = 'Payslip'.
    lv_document_data-obj_descr = subject.
e-mail body
    clear lt_objpack-transf_bin.
    lt_objpack-head_start = 1.
    lt_objpack-head_num = 0.
    lt_objpack-body_start = 1.
    lt_objpack-body_num = tab_lines.
    lt_objpack-doc_type = 'RAW'.
LT_OBJPACK-doc_size = STRLEN( LT_OBJTXT ).
    append lt_objpack.
For e-mail attachment
    lt_objhead = 'payslip.pdf'.
    append lt_objhead.
    lt_objbin[] = out_tab[]."i_record[].
    "describe table i_record lines l_att_lines.
    describe table out_tab lines l_att_lines.
CLEAR LT_OBJPACK.
    lt_objpack-transf_bin = 'X'.
    lt_objpack-head_start = 1.
    lt_objpack-head_num = 0.
    lt_objpack-body_start = 1.
    lt_objpack-body_num = l_att_lines.
    lt_objpack-doc_type = 'PDF'.
    lt_objpack-obj_name = 'attachment'.
    lt_objpack-obj_descr = 'payslip'.
    lt_objpack-doc_size = ( l_att_lines - 1 ) * 255 + strlen( lt_objbin ).
    append lt_objpack.
make recipient list
   " check user_mail_id is not initial.
    lt_reclist-receiver = user_mail_id.
    lt_reclist-rec_type = 'U'.
    append lt_reclist.
    call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      exporting
        document_data              = lv_document_data
        put_in_outbox              = 'X'
        commit_work                = 'X'
      tables
        packing_list               = lt_objpack
        object_header              = lt_objhead
        contents_bin               = lt_objbin
      contents_txt               = lt_objtxt
        receivers                  = lt_reclist
      exceptions
        too_many_receivers         = 1
        document_not_sent          = 2
        document_type_not_exist    = 3
        operation_no_authorization = 4
        parameter_error            = 5
        x_error                    = 6
        enqueue_error              = 7
        others                     = 8.
    if sy-subrc = 0.
      write:/ 'Mail sent to', 30 user_mail_id.
      write : sy-uline.
    else.
      write:/ 'Error encountered'.
    endif.
    clear : lt_objpack, lt_objhead, lt_objbin, lt_reclist.
    refresh : lt_objpack, lt_objhead, lt_objbin, lt_reclist.
   clear : filepath+3(17), pdffile, encryptpdf, batch_file.
    clear : out_tab, i_record, filetable.
    clear : user_mail_id, password.
else.
    write : 'payslip not generated'.
endif.
end-of-selection.
Please Check....

Itunes Error occured while converting this file An unknown error occured (-11828)

So I'm trying to convert a movie for my ipod because it would not accept the current version but I go and try to convert it to an iphone or ipod version and it gives me this error "Error occured while converting this file An unknown error occured (-11828)" Any ideas?

Hi, LongIsland14.
Thank you for visiting Apple Support Communities.
This issue would be related to a permission issue most likely with the iTunes Media folder. Here are a couple articles that will help you troubleshoot this issue.
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/ts1387
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/ts1277
Cheers,
Jason H.

HT4858 why am I getting an error message while importing from iPhone photo stream to iMac ?

I have not shared any photo for a few months. I tried to import photos into my iMac from iPhone photostream and I get a message saying "an error occurred while importing photo, please try again later". What am I doing wrong ?

There's no need to import photos from your iPhone to your iMac. Photostream is synced automatically via iCloud on Wi-Fi.
On your iPhone, tap Settings > iCloud
Make sure Photo Stream is switched ON.
On your iMac, open System Preferences > iCloud
Make sure Photo Stream is selected.

ERROR message! importing Motion files back into FCP. please help.

ok...so i started my project, everything worked seamless from fcp to motion and back...and then bam! error: 1 file recognized, 0 access denied, 1 unknown. ive done everything that i know, ive reinstalled, fcp studio and operating system...ive been over every setting...ive deleted preference files, repaired permissions... now my old motion files that were created before the error message still import just fine...can anyone help? i hate to outsource something i can do myself...
thank you.
gdh

Have you tried changing the extension on the motion file? You can label it .mov and see if FCP recognizes it then.
Andy

Error message while upload excel file (with macro) to sap (iw28)

While upload excel file to sap through iw28, i get error message (vb)
u2022 i have to say that the excel file contain macro , with out the macro , work fine .
u2022 The error display just in refresh command.
the error message :
Public Sub ALV_CUS_Exit()
Dim objs As ChartObjects
Dim obj As ChartObject
Dim sheet As Worksheet
Dim r As Range
For Each sheet In Sheets
Set objs = sheet.ChartObjects
For Each obj In objs
Set r = Sheets("RawData").UsedRange
obj.Chart.SetSourceData Source:=r
Next obj
Next sheet
End Sub

hi,
This is releated to the ABAP coding...There might be some ouput problem in the Abap list viewer...Pls check it with the ABAP consultant...
Regards
Priyanka.P

"Importer reported a generic error" message while importing ProRes 422 clip

Hi all. I am getting an "Importer reported a generic error" message when I try to import a ProRes 422, linear PCM clip into Premiere Pro CS6. I have imported other ProRes 422 clips in previous projects without a problem, although those clips did not have the linear PCM codec included. I have tried to solve the problem using advice on other forum threads. Changing the file name did not work. Removing underscores in the file name did not work either. Copying the file and pasting to a different folder before re-importing did not work either. The file DOES open in AE, but I am getting the error message without fail when I try to import into Premiere. Any thoughts on how to remedy the situation? FYI - I am still running version 6.0.0 of Premiere. Thanks for your help!

Try going to Help | Deactivate in Pr. Close Pr. Reboot. Launch Pr and activate if requested. That procedure has helped some users restore missing codecs and presets, maybe it'll help your Dynamic Link.
Jeff

Error message when importing motion files into FCP

In FCP.
I choose a clip/clips in my sequence. Then choose send to motion project and follow the directions from the training dvd.
By unchecking (embed "motion" content) then save the file with a different name. Then continue with making my graphics over the video clip/clips.
When I am done I then shut off the video layer of the clip in the motion timeline. Then I save the project. Then close Motion and try to import the motion project in FCP.
When I try to import, I get an error message stating "File Error: 1 files(s) recognized, 0 access denied, 1 unknown."
I go back to the training file to try the same procedure and it works fine.
Go back to my own project and it doesn't work.
Any ideas? Anyone?
I have a Mac Pro 2.66GHz / 5 gigs of ram / 512 vram ATI graphics card
Also working with universal software for FCP studio.
Intel 2.66GHz Mac OS X (10.4.9)
Intel 2.66GHz Mac OS X (10.4.9)

OK???
Don't know what the deal is. But I made a new sequence in my project and copied my other sequence with in the new one and then tried to do the whole clip step for step process of send to motion and importing back in and it worked!!!!
I check all the listed settings of my sequence in my browser window and both the old sequence and new sequence are the same.
I am happy that I can move on with my work, yet I am frustrated with the fact that I am not sure exactly what the problem is.
Thank You Again!

Error occured while importing xsd.file(Name contains invalid characters: -

Hello,
i muss import xsd.file. while importing this error occured:
İFMEXTDEF CCTS_CCT_SchemaModule-2.0 | http://example.org/XXX/XXX/OUT/NOZ (SC_NOZ V001 of example.org):
Name contains invalid characters: - .
Only a(A)-z(Z), 0-9, and "_" are permitted
This xsdfile name is CCTS_CCT_SchemaModule-2.0 but PI doesn't accept "-". But i muss use this file because this file is standart. What can i do for this?
Thanks
Nurhan
Edited by: Nurhan on Oct 18, 2011 11:22 AM

HI,
PI doestnt support special characters like '-'. first you need to change the file name as you specify '-'. to remove that and you have to give '_'. then uyou have to impot >XSD file into ESR under ExternalDefination.
i hope this will help you.
regards,
ganesh.

Error message while importing transport request using STMS_IMPORT

Hello SAP gurus
I have created Transport Request files (K and R files_ and have placed Transport request files in trans and data directories of a target system.
On target system I started transaction code STMS_IMPORT and then selected
Extras -> Other Requests -> Add
Then selected the transport request number adn clicked on OK. I have done this before and had not seen the problem that I am seeing now.
At this point I get an error message
Transport control program tp ended with error code 0212
Errors: could not access file as supposed (see dev_tp or S
What am I doing wrong? Any suggestion or feedback will be highly appreciated.
Thanks
Ram

Thanks a lot Friends
I followed your instructions and so far here is what I have done.
Since this is just a test server, I have given full permissions to /usr directory and all the files and directories below that.
The user account is a copy of J2EE_ADMIN. I have also added   'SAP_ALL', 'S_TMW_IMPORT' Profiles.
I am attaching the log which still indicates that there is permission problem.
Any other suggestion will be highly appreciated.
    File:
TESTSERV\sapmnt\trans\log\SLOG1045.ERM                               08.11.2010 07:32:39
System Log Entries
HALT 20101107074318
ERROR:
TESTSERV\sapmnt\trans\cofiles\K900082.DEM : cant open
: Permission denied
ERROR: EXIT(16) -> process ID is: 4204
HALT 20101107080535
ERROR:
TESTSERV\sapmnt\trans\cofiles\K900082.DEM : cant open
: Permission denied
ERROR: EXIT(16) -> process ID is: 2984
HALT 20101108065543
ERROR:
TESTSERV\sapmnt\trans\cofiles\K900082.DEM : cant open
: Permission denied
ERROR: EXIT(16) -> process ID is: 3428
HALT 20101108071027
ERROR:
TESTSERV\sapmnt\trans\cofiles\K900083.DEM : cant open
: Permission denied
ERROR: EXIT(16) -> process ID is: 1256
HALT 20101108071725
ERROR:
TESTSERV\sapmnt\trans\cofiles\K900083.DEM : cant open
: Permission denied
ERROR: EXIT(16) -> process ID is: 4192
HALT 20101108072313
ERROR:
TESTSERV\sapmnt\trans\cofiles\K900083.DEM : cant open
: Permission denied
ERROR: EXIT(16) -> process ID is: 3904
HALT 20101108073220
ERROR:
TESTSERV\sapmnt\trans\cofiles\K900083.DEM : cant open
: Permission denied
ERROR: EXIT(16) -> process ID is: 5252

ITunes error messages while syncing after 0SX 10.6.6 update

After installing the recent OSX 10.6.6 update, I am receiving the following error messages in iTunes when trying to sync both my iPhone 4 and my 1st generation Apple TV:
iPhone error message:
"The iPhone cannot be synced. The disk could not be read from or written to."
Apple TV error message:
"iTunes cannot sync photos to the Apple TV because of a problem on your computer. The disk could not be read from or written to."
I'm not sure if this matters - but in the iPhone error message - it does not state if the "disk" is the iPhone or the computer - but in the Apple TV error message it does make this distinction, saying that the problem is on my computer and specifically mentions photos.
Now, once I dismiss either of the error messages, the sync progresses normally and completes successfully. Also, I have checked my computer (MacPro) and all diagnostics (including the internal hard drives) pass with flying colors. And the computer is working fine otherwise - so I have no reason to believe that there is a hardware problem with the computer. And I would find it very strange that I would have a hardware problem with both my iPhone and Apple TV appearing at the exact same time. And finally, both the iPhone and Apple TV are performing normally when in use.
Since this problem did not start until after running the 10.6.6 update - logic tells me that is where the problem probably lies.... the question is how to resolve it - anyone have any ideas?

Both those symptoms are consistent with a damaged photo cache. If you remove your existing photo cache as per the instructions in the following document, does that get you past the error?
[iTunes: Photo sync creates iPod Photo Cache folder|http://support.apple.com/kb/TS1314]

Error message while importing upgraded LR3 catalog to new LR4 catalog

I'm using a Win7 x64 system, 3Ghz Xeon dual core, 8 GB ram system. After upgrading a LR3 catalog to LR4, it would not display all images in GRID VIEW in the upper level folders. i.e. D:/Photos/2011. It will display the images in the 2011 folder but not in the Photos folder. And yes I do have the "Show Photos in SubFolders" selected.
By importing this updated LR4 catalog to a new LR4 catalog the display problem disappears. However, I get an error message at the end of the import saying that "Lightroom could not import this catalog because of an unknown error." This occurs after it says it is importing updated keywords. But, as compared to the LR3 catalog, the new LR4 catalog shows the correct number of images in the catalog, shows the correct number of collections and seems to have all the keywords in the keyword list panel.
Because there seems to be some sort of catalog database upgrade error, I am hesitant to use LR4 for production at this time. Does anyone have any suggestions as to what this error might be, or a work around for the error so I can be confident in my LR4 catalog?
Thanks,
Tony...

I've pgraded to LR4.1 RC1 and then created a new catalog, imported from my original LR3 cat. It updated that temporary cat and then imported to the new LR4 cat without issues or error messages. I then just did an upgrade to my original LR3 cat and saved it in another location. Upgrade went without hitch or error messages and I am now using that catalog. So far, so good with the new candidate.
Tony...

ITunes error message while importing a file

Similar Messages

Maybe you are looking for