Itunes error msg with latest update - will not open!
Just installed latest itunes update (9.2.1 I think) - update went fine, rebooted, all ok. Just fired the computer up again today and tried opening itunes only to immediately receive an error msg saying "itunes can not open - missing files. Re-install itunes".
Anyone found this?
Just checked and I do have the latest version of Quicktime installed.
Don't want to re-install itunes as I might loose all my settings.
Thanks.
Fixed it! Took the plunge and hit "download itunes". When it popped up, the option asked if I wanted to "repair" to I did. 100% fixed and all me settings etc are still there! Phew!!
Similar Messages
-
HT5654 Latest update will not install on my iPad
Latest update will not install on my iPad
That is unfortunate.
If help is actually desired, provide some details of the issue such as any errors that are occurring.
We are not mind readers. -
I keep getting an error, and the Java Update will not install. What can I do?
Never mind. I kept trying, and finally when I opened "About This Mac" and clicked the software update from there (as opposed to the "Software Update" just below), the Java update finally worked.
-
I accidently deleted QuickTime from my computer. Then I did a system restore and retrieved the program. Now Itunes can't find QuickTime and will not open.Is there a eazy fix for this without using my Ipod? Ihave 6K songs in Itunes that I can't get to.
Thank You
T-BILLHmmm. There's a couple of things that might be going on with that one.
Let's try an uninstall and reinstall of QuickTime first.
If you're using XP, head into your Add or Remove Programs control panel. Select "QuickTime", click "Change" and then click "Remove".
If you're using & or Vista, head into your Uninstall a program control panel, select QuickTime, and then click "Uninstall".
You can get QuickTime back either via Apple Software Update (in your Start menu go "All Programs > Apple Software Update" ... QuickTime should appear in the "New Programs" section), or by downloading a QuickTimeInstaller.exe from the following location:
http://support.apple.com/kb/DL837
Does your iTunes launch properly now? -
Updates will not open...past 2 days know???
Hello,does anyone know why my updates will not open,it just shows a white page with the # of updates that need to be updated.Ive tried doing all re-sets including network re-sets.Im running a iPad 3 iOS 6.1.2.THANK YOU?
It seems clear that something became corrupted in the untimely shutdown.
Look at the splash logo and make a note of the event that FCP X is stuck at.
It will probably be saying something like "Updating Event (event-name-here)".
Usually, it is some render file. Since they can be rerendered, what I do in such circumstance is the following:
- force-quit FCP X
- in the Finder, locate the problematic Event (it is in a folder named just like the event, inside the "Final Cut Events" folder)
- open the folder for this event, and then the "Render Files" folder inside it
- move the contents of this "Render Files" folder to the trash
- start FCP X again (note that some portions of your timeline may need to be rerendered, but that is not a big deal) -
I often get emails with attachments that will not open with my mac often a small ? will show. How do I open these
What kind of attachment? Post an example file name.
-
Error Code 150:30 Photoshop Will Not Open after System Software crash
Error Code 150:30 Photoshop Will Not Open after System Software crash
if mac os,Error "Licensing has stopped working" | Mac OS
-
Safari 5.1 is not working with Lion. Will not open any websites. Solutions?
http://support.apple.com/kb/TS1920
-
Itunes version 7.6 and later will not open (no error message recieved)
All Itunes versions before 7.6 work fine on my computer, i am currently using 7.4 because i can not use 7.6. However, with 7.4 i can't update my ipod because it is a newer ipod. I have installed, reinstalled and tried many other things to get 7.6 to work but it will not open when i double click on it. The process runs as evidenced by the task manager but the hourglass disappears and it never opens. It is very frustrating any help please?
Often if I update iTunes, i need to reaccept the terms etc when i reopen it.
If you have other programs open, you often cant get this "terms acceptance" screen to come up.
I suggest closing all open open programs and then trying. -
I have downloaded the latest itunes for window 7 but it will not open on my computer
I have downloaded the latest Itunes software but it will not open on my computer
Try this article: TS2363
That may help it out. -
I installed itunes on my pc and it will not open?
I installed itunes on my pc, we have ie8 ans it will not open. i tried to uninstall and reinstall, whats next?
First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
http://www.apple.com/itunes/download/
If you still get the errors after that, try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Acrobat 10.1.7 update will not open
Acrobat X was purchased as part of CS6 suite. I have installed it on my Dell desktop and Samsung laptop. Both machines are running Windows 7-64 bit and Internet Explorer 9. Version 10.1.6 was running fine on both machines. I installed the 10.1.7 update yesterday, 5/15.
Today Acrobat 10.1.7 is running fine on the Dell desktop
It will not open on the Samsung laptop. When I click on the desktop Acrobat icon or try to launch it from the Start Menu, nothing happens. There is no error message.
I also right clicked on a PDF file, chose the Open With option, navigated to Acrobat X in my Program Files folder and said to use this program as the default. Again, the problem was not corrected.
I went to Control Panel and repaired the Acrobat 10.1.7 installation. This did not fix the problem.
Finally I uninstalled Acrobat and reinstalled the entire Creative Suite, putting me back to version 10.1.1. That runs without problems, including the IE add-on for converting web pages.In my original post, I said Acrobat would run on my Dell desktop but not the Samsung laptop. The next day, I found it wouldn't start on the Dell, either. When trying to convert a web page, buried at the bottom of the windows I found the message from Acrobat that it was not activated (why isn't this message on TOP ???).
I guess the initial problem -- running on one computer but not the other -- was a red herring.
I looked more closely at the posts about the program not launching after 30 days and checked Control Panel. I installed the program on April 15. The problems started on May 16 !! So I guess this is just the known problem with activation when installed as part of CS6. Still a mystery why I got an extra day of use on the Dell compared with the Samsung.
I intended to update my thread yesterday. I could see my message but there didn't seem to be a way to update or 'respond' to it.
I have applied the AcroFix.exe patch, but not yet updated to version 10.1.7.
Thanks for your help. -
Firefox update will not open. I reverted to 15.0.1 and it works.
I am running Windows 7. The problem began with update 25.0.1. I completely uninstalled and reinstalled 25.0.1 several times with no success. Quit using Firefox for a time, then tried installing 26.0. Still would not run. So I reverted to 15.0.1, and it will run.
Immediately after installing the upgrade, Firefox will run. After rebooting my computer, Firefox will not open. An error "not responding" appears and I have to go into Task Manager to close Firefox.
I have tried everything in your help files that pertains to my computer. I really like Firefox, but am getting a bit frustrated.Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you. -
User account with supervised devices will not open configurator
When we initially deployed our school's iPads, (113) we used Apple Configurator by creating separate user accounts for each teacher. (5) I am trying to update a particular class's iPads and the user account will NOT open the app store or Configurator in their profile. (bounces, but doesn't load) The other users' accounts are fine. I restored the OS (10.9.5) and that didn't help.
How can I get these unsupervised if I cannot open Configurator? I have quite a few paid apps using VPP on them so I have to get at them.
Now that I am more familiar with Configurator, I want to unsupervise all of my devices and re-supervise them under one user.
Thank you for any help!!!!!The disk repairs are in the applications through utilities, it's called disc utility. Open it up, click on the disc you want to check and do a disk permission repair. It's fairly easy, and hopefully will help with your applications. Post back if you are still having troubles.
Ray -
Iphoto stuck in "updating" will not open, or let me hit the install button or resume.
i took my laptop to the mac store for new ram they said there was an update and they started the update at the store when i left the update was not complete and it stopped updating but when i got home i noticed it was never done so i tried hitting resume and nothing happens also it will not open at all or let me hit the install button on the app store page.
Just a type:
see i foyer can = see if you can
A result of big fingers on an tiny keyboard probably.
Maybe you are looking for
-
I can't get my iphone to let me connect to itunes. It keeps teling me can not connnect to itunes. This is after I just updated it to the new 6.0
-
How to use the free apple id in iphone
my iphone use the maximum free id i have use a different id but there are show the problem your iphone used the maximum apple id how to solve this problem plz send me
-
Examples in ABAP for initial and end rotine
Ola expert´s, I´m trying to write a program in Initial Routine and End Routine (Transformation), but some declarations are diferent and so is the logic. In fact, I need some examples for declarations (variable, internal table, etc.) and some examples
-
Colorer surface entre 2 courbes
Bonjour, Pour l'affichage de pic chromatographique (graph XY multi plots), je souhaite simplement ajouter une couleur dans la surface comprise entre mon pic et la ligne de base, mais je ne trouve aucun moyen de le faire proprement!! Mes 2 courbes son
-
DR Server Setup using GLVM/DB2 HADR and HACMP/XD.
We have CI/DB of SAP ERP SR3 and SAP BI 7.0 SR3 based on AIX 6.1 / DB2 9.5 installed on two separate LPAR's ( one LPAR has ABAPJAVA ERP CI/DB and otherABAPJAVA BI CI/DB) in P570 system at main site. DR site is 20Kms away from main site IBM has propo