Itunes error: remote speaker not compatible w/ 7.1.1.5

Arggghh, I just upgraded to itunes 7.1.1.5 (as suggested by Apple), and now I can't connect to my Airport Express Base Station from itunes. I get the following message:
The remote speaker is not compatible with this version of itunes.
I have the latest firmware upgrade 6.3 for the base station. It worked fine for months on itunes 6 and 7.0, don't understand this. Help! (FYI I'm not running bonjour on my PC, and I dig Archers of Loaf.)
Dell PC Windows XP

OK I got it working again. I'm not sure exactly what did the trick, but I'd recommend the following:
1. Repair your wireless modem connection via your taskbar (rick-click on the Wireless Network Connection, Repair)
2. Start itunes while the Airport Express Setup Assistant is running
3. Restart your computer
4. Keep trying, after 2 days it's working again (???)

Similar Messages

Error - Remote speaker not compatible with this version of itunes

Alright - I give..itunes (v7.2) with airport express for airtunes
I have a toshiba laptop (Win XP) that streams itunes to remote speakers just fine..but my desktop (Win XP - Dell Dim E510 with wireless) when I switch speaker to remote speakers, comes back with message - "the remote speaker xxx is not compatible with this version of itunes"...both computers have the same version of itunes..both computers can access airport express for adminstrative actions - Airport Express is connected to a stereo..any idea what is the problem?
Dell Dimension E510 Windows XP

Ditto here.
Mac OS 10.4.9. iTunes 7.1.1 (5)
Airport Extreme Base Station "chained" to 2 Aiport Express Remotes. All connections are fine. Have internet on remote Macs. Airport Admin utility displays all three airport units, but I'm now unable to broadcast to the remote Express hooked up to my stereo in adjacent room. Have done this many times in the past without problem, but not in past couple months, so can't say if it broke with 7.1 or 7.1.1, but I get this message from iTunes:
The remote speaker "Living Room Speakers" is not compatible with this version of iTunes.
Prior to restarting iTunes (and being sure all Aiport station firmware was up-to-date, I was getting the message that no speakers were connected (double-checked all speaker and stereo connections), but now just the "not compatible" message.
G5 2.7 Dual Processor Mac OS X (10.4.9) 2 GB RAM
G5 2.7 Dual Processor Mac OS X (10.4.3) 2 GB RAM

Itunes - airport express - remote speaker not compatible?

Airport Express unit (AX) connects to my network and verified to be connected to the network just fine...but on itunes (v. 7.4.2.4) on my desktop (Dell Dim E510 with wireless, Windows XP, Linksys router WRT350N with AX for airtunes)...when I switch speaker to the AX/stereo unit, comes back with message - "the remote speaker xxx is not compatible with this version of itunes"... I've battled this issue for a long time -- any idea what is the problem?

OK I got it working again. I'm not sure exactly what did the trick, but I'd recommend the following:
1. Repair your wireless modem connection via your taskbar (rick-click on the Wireless Network Connection, Repair)
2. Start itunes while the Airport Express Setup Assistant is running
3. Restart your computer
4. Keep trying, after 2 days it's working again (???)

Remote speaker not compatible with this version of iTunes?

Hello,
I have the newest version of iTunes and an Airport Express through which I play music.
After upgrading to the newest version of iTunes, a window appears stating that my remote speakers are not compatible with this version of iTunes when I try to select the remote speakers as my audio output.
What does this mean and how can I fix the problem? How can my speakers not be compatible with iTunes when all I have is an optical cable from my Airport Express going into the back of my home theater receiver?
Cheers,
--VesaM

You'll get this error if the version of firmware on the AirPort Express is incompatible with the version of iTunes you are using. Make sure you have the latest base station firmware (6.3) and the latest iTunes (7.0.2).

Remote speaker not compatible

So I just tried to use iTunes to stream music to my remote speaker, which I've had connected and been using without problems for many years. I have upgraded to iTunes 7.2, but I did this awhile ago.
Nevertheless, I got the following error message when I tried to select my remote speaker: "The remote speaker 'Euterpe' is not compatible with this version of iTunes." I haven't updated the version recently, and I used the speakers without a problem on Tuesday of the past week.
Has anyone else experienced this problem? I have recently installed security updates that were prompted via the automatic software update, but I didn't see anything specifically mentioning changes to iTunes.
Any help is greatly appreciated.
iBook G3, 900 Mhz Mac OS X (10.4.2) 640 MB RAM

So I answered my own question, but, in case any one else has this problem, it required updating the firmware on my Airport Express. I don't know why it took so long for the incompatibility to manifest, but I suspect the recent security update was the proximate cause. In any case, the firmware update (V6.3) fixed it.

When I try to download 'Pages' from iTunes, an error displays 'Application Not Compatible. This application requires iPhone 5.0 Software Update' WHY? This keeps happening.

When I try to download 'Pages' from iTunes, an error displays 'Application Not Compatible. This application requires iPhone 5.0 Software Update' WHY? This keeps happening.

I sounds like you have the first generation (1G) iPod Touch with an iOS earlier than 2.0, Yu can identify your ipod here:
Identifying iPod models
You can identify your iOS version by going to Settings>General>About and look by Version. Yu can update ti iOS 3.1.3 (the lated for the 1G) by this link. It is a paid update. You may have to try another browser to get he sublink to work correctly.
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
What computer OS and version do you have and what version of iTunes is installed on the computer?

I have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this

i have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this bluetooth with my devices, thanks

sos1der wrote:
pairing the apple equipment is not a big deal just wanted to add songs from itunes wirelessly.
You can only add songs to your iOS device from iTunes via Wi-Fi sync or via your cable, not Bluetooth.
sos1der wrote:
but i tried paring my LG bluetooth so i can listen to music on my computer wirelessly buy it gives me the same error message
That's an entirely different issue, unrelated to your iOS devices.

ACC Setup Error - Remote Server not Responding in the Proper Manner - Windows 7 Pro

Hello -
I was able to install the CC upgrades to all my software on my laptop without issue. Whenever I try to upgrade them on my desktop I recieve the attached error. I am running Windows 7 Professional. My guess this is being caused my my company's firewall however my IT director claims he set me up to bypass the firewall when trying to install this.
Thank you for your help.

Hi Mike603,
Please refer to the following help document on error " Remote Server not responding".
http://helpx.adobe.com/creative-suite/kb/remote-server-responding-installing-aam.html
Hope this helps.
Please let me know in case of any problem.
Regards,
Sumit Singh

When installing Adobe Presenter, get error message plattform not compatible.

When installing Adobe Presenter, get error message plattform not compatible.

Check the tech specs to see if your system meets the minimum requirements for the software.

Speaker not compatible with this version of Itunes

Suddenly, I am getting this message when selecting my remote speakers..."Family Room" speaker is not compatible with this version of Itunes. I have re-installed an older version of Itunes, updated my firmware on my airport express and even recreated my wireless network...nothing works so far.

I am having the same problem from my wireless PC where I just installed the latest version of iTunes for the first time. My hardwired PC works. I wonder if I have to disconnect from the hardwired PC before I can connect with the wireless?

How can I download itunes 10.6.3, as itunes 10.7 is not compatible with my macbook?

I upgraded my iphone 4s to iOS X 6. It will not connect to my itunes now because it requires itunes 10.6.3. The latest version of itunes is 10.7 but this is not compatible with my macbook, when I download 10.7 it says that i need to have Mac OS X 10.6.8 or better, which i don't and I think i have to pay to upgrade. Is there still a way that i can download the earlier version of itunes which is 10.6.3?

http://support.apple.com/kb/DL1575

Moved Premiere Elements 10 project Error: "Project is not compatible with current version of Premiere Elements"

After moving an entire client folder from an external hard drive to an internal one, the client's video, created in adobe premiere elements 10, will no longer open in adobe premiere elements 10. It appears to be loading the project, and instead of completing, the following error message is displayed: "The project is not compatible with current version of Premiere Elements."
The same thing occurs when attempting to open the archive files.
New projects, and unmoved projects behave properly.
Moved projects receive this error.
I'm running Windows 7 Home Premium SP1 on a solid state drive (SSD) (c:/), where premiere elements is installed
My documents, including the project I need to work with are on my "storage" drive (HDD). it is (f:/)

txnoda
Archiving Aspects of this.....
First let clear the matter of the "archiving" as a life saver.... We do not appear to be on the same wave length.
a. I am talking about File Menu/Project Archiver with its Archive project and Copy project options. This feature is a safety net to save you when you
inadvertently disconnect source media from the project file. With the Archive option (Trimmed Folder result), you get saved to the computer hard drive (safe keeping) a copy of the project file plus copies of the media that were taken to the Timeline. With the Copy option (Copied Folder result), you get copy of the project files plus copies of much more.
b. Instead, you appear to be talking about "archiving" in the context of AutoSaves. AutoSaves are saved snapshots of the project at various phases of the edit. They suffer from the same shortcomings of the original project that has been disconnected from its source media.
When you import media into a project, all you get are copies of the originals in the project. But, those copies need to trace back to originals at the locations where they were when first imported into the project. Moving, renaming, deleting files/folders that went into the project after the project save close leads to some very time consuming messy situations.
What to do....
If you can, put everything back the way it was. If not.....
Let me emphasis some factors..
You wrote
After moving an entire client folder from an external hard drive to an internal one, the client's video, created in adobe premiere elements 10, will no longer open in adobe premiere elements 10. It appears to be loading the project, and instead of completing, the following error message is displayed: "The project is not compatible with current version of Premiere Elements."
Here you mention specifically "client's video". Later you detail with .mod files converted to .avi. What kind of .avi? If you have converted to AVCHD.avi or H.264.avi, they have been found not to be compatible with Premiere Elements. You should not be able to import them into any new or old project.
From what you described, I am envisioning
"Video" Folder
which contains 2 folders named
"Timestamped Folder" with .avi files
and
"DVD" Folder with the project file (project.prel)
The project file has many files generated automatically in the course of it workflow. Where do you have them going?
(See Premiere Elements 10 Edit Menu/Preferences/Scratch Discs). If you have the Scratch Discs directed
"Same As Project", then we would expect all those files to be going to the DVD Folder in the above scenario.
If we could open the project and get greeted with some "Where is the file.....?" messages, that might give us some hope.
But that is not the case.
Consequently from what you have said, I am suggesting that the path of least resistance is try to recreate the "before".
Please review and consider.
ATR
Add On...Not sure if it will assist in the matter, but the following is the link to Adobe's document related to troubleshooting
damaged projects.
Troubleshoot a damaged project file | Adobe Premiere Elements

Can't download iTunes, error message "Key not valild for use in specified state"

I can't download iTunes, keep getting error message "Key not valid for use in specified state" I uninstalled and tried reinstalling but same issue.

For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\<User>\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

ITunes 7 shared music not compatible with previous versions

I installed iTunes 7 on my PC and have iTunes 6.0.5 on my Mac. From my Mac, my iTunes shared library on the PC is greyed out. When I select the shared library, I receive the following message:
"The shared music library ... is not compatible with this version of iTunes."
However, iTunes 7 on my PC can see and play sounds from the shared iTunes 6.0.5 library.
1.42GHZ Mac mini, Sony RX-500E, 2Ghz Mac OS X (10.4.7)

I find this same situation and it would be nice if the two were compatible. I don't want to buy another computer just to play music from a shared library but I like the new iTunes for other reasons. I bet that's what Apple wants me to do though.
I am unsure why the two are not compatible because .mp3 and .aac files can be played in both versions and the files are unchanged. It would be nice if they would give an option for backwards compatibility but why would they spend the money to keep customers happy?
Sorry for the cynicism.
Powermac G5 dual 1.8 gHz Mac OS X (10.4.3)

Itunes error idriver could not install

10 hours later.....
completed all of the info. i could find here! So far!
Problem:
During itunes loading receive error: idriver could not install some sort of memory error any ideas?

hi mark!
can you tell us the full text of that error message?
sometimes it's easiest to send us a screenshot of the error message box. there's instructions on how to do that given here:
Taking screenshots to help with problems
love, b

Itunes error: remote speaker not compatible w/ 7.1.1.5

Similar Messages

Maybe you are looking for