Itunes.exe - application error "0x07e20740"

I just installed itunes 10.5.3 but everytime I try to open it I get the following message:  itunes.exe - application error   the instruction at "0x07e20740" referenced memory at "0x07e20740". the memory could not be "written".   What should I do to get rid of this bug so I can open itunes 10.5?

Arg - itunes application error
The instruction at 0x03e5F026 referenced memory at 0x00000034. The memory could not be "read"
I just upgraded to itunes 11 (11.0.1?). It gave the error below but it was memory at 0x00000008. So I completely uninstalled and re-downloaded. And now it errors on 0x00000034. I know both of these addresses are likely in machine registers that itunes shouldn't touch.
So re-installing didn't work. I'm stuck with no iTunes. Where can I download the old version?

Similar Messages

  • I can't open itunes after installation, says"itunes.exe-application error"

    first time, I installed ipod and itunes from the cd, it failed. then I downloaded from the website and reinstalled, it didn't work, either. afterward I have tried many times to delete,restart and reinstall, it just didn't work at all>_<
    every time i double-click the itunes.exe, it says
    【itunes.exe-application error
    the instruction at "0x10001040"referenced memory at "0x10001040". the memory could not be "read"
    click on OK to terminate the program
    click on CANCEL to debug the program】
    I tried to delete quicktime as well, but it showed that it could not be deleted or something like that...
    I can't download music from the computer due to the unworked itunes...help~~~~~~~>_<<br>
      Windows XP  

    "the following file doesn't exist or is not a valid uninstallation log file
    C:\WINDOWS\SYSTEM32\QUICKTIME\UNINSTALL.LOG"
    ahhhhh ... one of those.
    oddly enough, these ones typically respond better to brute force than they do to finesse. rather than uninstalling QuickTime first, try doing a standalone QuickTime 7.1.5 install "over the top" of what you've already got in there:
    Quicktime 7.1.5 Installers … get the one that doesn’t mention iTunes
    if the standalone install goes through okay, does your iTunes start launching properly again?

  • Itunes: itunes.exe - Application Error. The instruction at "0x00000000" referenced memory at "0x00000000". The memory could not be "written"

    Itunes: iTunes.exe - Application Error
    The instruction at "0x00000000" referenced memory at "0x00000000".
    The memory could not be "written"
    Anyone have solution. Already tried uninstall and reinstall

    Did you sort this issue out?
    I have the same problem.

  • ITunes.exe - Application Error

    Hello!
    Everytime I try go in iTunes Store, it's doesn't open, show this error. I've reinstalled the iTunes several times, but this doesn't work! Please, help me, today I won $50 to buy apps but I can't :/

    iTunes.exe - Application Error
    Exception unknown software exception (0x80000003) in 0x7c90120e.
    Click "OK" to close the program
    Click "Cancel" to debug the program
    This /\ But in this print the text is in portuguese.
    I've reinstalled, rebooted, used the cleaner and spyboot, but nothing works.

  • DDE server window; itune.exe-application error

    Can t open itune: DDe server window: itune.exe-application error. Then, instruction at 0x6d561040 memory could not be read.  P.S.: the code change every time i click ok.

    I do not know the answer to this, but if you are willing to to do some troubleshooting:
    Which version of windows are you using?
    XP vista or 7, 64 bit or 32 bit.
    Do you have Quicktime? If so does Quicktime launch?
    Did you change anything on your computer just before this problem started?
    Please look in the Event viewer for a helpful error message.
    To open the event viewer:
    Control Panel>>Administrative Tools>>Event Viewer
    Or type Event Viewer into the search box.
    Then select Windows Logs>>Application
    Open the Event viewer immediately after iTunes crashes.
    The error message should be at or near the top.
    Double click on it to open more information and press copy.
    Paste the result into your post.
    You are looking for a message starting something like this:
    Problem Event Name: APPCRASH
    Application Name: iTunes.exe
    Application Version: 10.2.1.1
    Application Timestamp: 4d756476
    Fault Module Name: iTunes.dll

  • Itunes.exe - Application error  ..... memory cannot be read

    Using version 10.3.1.55 (although the problem has existed in previous version for a few months now)
    After using the computer for a few hours - when I close it down I get a box saying:-
    iTunes:iTunes.exe - Application Error
    The instruction at 0x64761602 referenced memory at 0x06294238. The memory could not be read.
    Click OK to terminate the program.
    This often happens after Shockwave has crashed in CHROME - but has also happened without Shockwave crashing.

    how many instances do you have ? what are you trying to deploy (war,jar or ear)? how do you access the application ?, I mean do you go through any webserver ?, have you configured the webserver plugin correctly ?

  • Each time I try to synch photos from my Windows 7 PC to my iPad2, iTunes stops working, and the error report says Problem Event Name:     APPCRASH   Application Name:     iTunes.exe   Application Version:     10.3.1.55   Application Timestamp:     4deec35

    Each time I try to synch photos from my Windows7 PC to my iPad2, iTunes stops working and the error message is:
    Problem Event Name:                          APPCRASH
      Application Name:                             iTunes.exe
      Application Version:                           10.3.1.55
      Application Timestamp:                    4deec351
      Fault Module Name:                          ntdll.dll
      Fault Module Version:                        6.1.7601.17514
      Fault Module Timestamp:                 4ce7ba58
      Exception Code:                                  c0000005
      Exception Offset:                                0002e3fb
      OS Version:                                          6.1.7601.2.1.0.768.3
      Locale ID:                                             1033
      Additional Information 1:                  0a9e
      Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:                  0a9e
      Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
    I reloaded iTunes 10 (64 bit) successfully, but the problem remains the same.
    Any suggestions?

    I looked in the folder from which I want to synch photos, but there is no such thing as an "ipod photo cache" in that folder, or sub-folders, as suggested in the link which you were nice enough to provide.
    I have also tried removing photos from my iPad2 Photos App, and "iTunes has stopped working" shows up  again as soon as I click on the "Synch photos from" button.

  • Get these two error messages when I run the iTunes exe file:  Error 2 and Error 2 (Windows error 2).  Both say Apple Application Support is required.  Uninstalled and tried to install again several times.  Using Windows 7 64 bit on laptop.

    Trying to install iTunes on my Dell laptop with Windows 7 - 64 bit.  Get these two error messages when I run the iTunes exe file:  Error 2 and Error 2 (Windows error 2).  Both say Apple Application Support was not found.  Can anyone tell me why this is happening?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I upgraded i tunes and it crashed...in winows 32 bit ista home premimum and error is ...Problem signature:   Problem Event Name:     APPCRASH   Application Name:     iTunes.exe   Application Version:     11.1.4.62   Application Timestamp:     52ddbf7a   F

    i m using window vista32 after itunes upgrade.. itunes crash ..
    Problem signature:
      Problem Event Name:          APPCRASH
      Application Name:          iTunes.exe
      Application Version:          11.1.4.62
      Application Timestamp:          52ddbf7a
      Fault Module Name:          ntdll.dll
      Fault Module Version:          6.0.6000.16386
      Fault Module Timestamp:          4549bdc9
      Exception Code:          c0000005
      Exception Offset:          00062086
      OS Version:          6.0.6000.2.0.0.768.3
      Locale ID:          16393
      Additional Information 1:          a183
      Additional Information 2:          96f68295953afa2675d1551e001cfa2f
      Additional Information 3:          5630
      Additional Information 4:          5482da5e28e2dc79b1d40bd90d8c9b

      Fault Module Name:          ntdll.dll
      Fault Module Version:          6.0.6000.16386
    Even if you don't have any third-party plug-ins or add-ons, try opening iTunes in safe mode as per the instructions in the following document:
    iTunes: Troubleshooting issues with third-party iTunes plug-ins
    If iTunes opens in safe mode, quit iTunes and then try launching it again normally. Does it launch without the error messages this time?

  • So, I can't open iTunes - get a WerFault.exe - Application Error

    OK.  Two days ago, iTunes worked just fine.  No updates between then and now.  Nothing new installed on my computer.  I tried to open iTunes today to listen to my music, and get this:
    It pops up at least 3 times, and one time somewhere areound 15 or 20 times, and iTunes doesn't open!  I am a certified computer tech, so went through all the troubleshooting I know - even redownloaded iTunes, ran it, and choose to "Repair" iTunes.  I even removed iTunes and completely re-installed it, and it STILL does it!  What the **** is going on?

    ...the screenshot didn't stay there... the error window has the following:
    WerFault.exe - Application Error
    The instruction at 0x703120e0 referenced memory at 0x8ead6a78.  The memory could not be written.
    Click on OK to terminate the program.

  • Idriver.exe -application error apprears when instaling itunes 6

    ok i try to install itunes 6 and when it meant to bring up the installshield wizard it will apprear in the taskbar but nothing is actually there. a while after it the following message appears
    Idriver.exe application error blah blah blah the memory could not be "read"
    plez help

    hi Madam!
    hmmm. i couldn't turn up anything specific at event ID:
    http://www.eventid.net/display.asp?eventid=26&eventno=2271&source=Application%20 Popup&phase=1
    (i'm not a subscriber, so i can't follow up their "M" links ... not that there was anything specific to the IDriver.exe anyway.)
    hmmmm. if you
    b do
    start running into problems, and you've got the time, it may be worth getting an install log to the moderators:
    Gayle B, "If you are experiencing installation issues...", 06:20pm Oct 12, 2005 CDT
    still at the early stage of troubleshooting these, i'm afraid, so i can't give you much more feedback than this. maybe keep checking in every day or so to check on any developments?
    love, b

  • ITunes 6.0 - IDriver.exe - Application Error

    I installed iTunes 6.0 on 3 Windows XP SP 2 computers today. All upgrading from iTunes 5.0
    On 2 of the computers I got error messages pasted below during the QuickTime part of the installation. I dismissed the errors and the installation "completed successfully".
    I've used iTunes 6.0 and opened Quicktime and everything seems fine so far. So I'm not asking for help with a problem, just noting this issue in case anyone else has observed it.
    I am aware that IDriver.exe is part of the InstallShield routine. A quick check and I couldn't find anything about this error.
    Madam
    Event Type:     Information
    Event Source:     Application Popup
    Event Category:     None
    Event ID:     26
    Date:          13/10/2005
    Time:          5:24:40 PM
    User:          N/A
    Computer:     COMPUTER
    Description:
    Application popup: IDriver.exe - Application Error : The instruction at "0x77511029" referenced memory at "0x0000005c". The memory could not be "read".
    Event Type:     Information
    Event Source:     Application Popup
    Event Category:     None
    Event ID:     26
    Date:          13/10/2005
    Time:          5:25:11 PM
    User:          N/A
    Computer:     COMPUTER
    Description:
    Application popup: IDriver.exe - Application Error : The instruction at "0x7c92ae22" referenced memory at "0x00000000". The memory could not be "read".

    hi Madam!
    hmmm. i couldn't turn up anything specific at event ID:
    http://www.eventid.net/display.asp?eventid=26&eventno=2271&source=Application%20 Popup&phase=1
    (i'm not a subscriber, so i can't follow up their "M" links ... not that there was anything specific to the IDriver.exe anyway.)
    hmmmm. if you
    b do
    start running into problems, and you've got the time, it may be worth getting an install log to the moderators:
    Gayle B, "If you are experiencing installation issues...", 06:20pm Oct 12, 2005 CDT
    still at the early stage of troubleshooting these, i'm afraid, so i can't give you much more feedback than this. maybe keep checking in every day or so to check on any developments?
    love, b

  • SetupAdmin.exe-Application error while installing itunes and quicktime

    Everytime I try to install iTunes or standalone QuickTime, I get the error SetupAdmin.exe - Application error :
    "The instruction at "0x76c941a9" referenced memory at ")x76c941a9". The memory could not be read. "
    and the installation finishes. After that I can see a QuickTime icon on Desktop which works fine but there is no iTunes icon.
    I have followed all the steps of uninstallation properly as per these links :
    http://support.apple.com/kb/ht1925
    I have also checked the msconfig startup taskbar, there is no Qttask.exe program running.
    Please help me out.

    Try installing QuickTime standalone, not regular
    http://www.apple.com/quicktime/download/standalone.html
    If that installs OK, perhaps the iTunes installation will go through.
    If there is any error number druing either install, please post it.

  • My itunes will not work and this is the error message. Problem signature:   Problem Event Name:     BEX   Application Name:     iTunes.exe   Application Version:     11.0.1.12   Application Timestamp:     50c8fc7e   Fault Module Name:     QuickTime.qts_un

    Problem signature:
      Problem Event Name:          BEX
      Application Name:          iTunes.exe
      Application Version:          11.0.1.12
      Application Timestamp:          50c8fc7e
      Fault Module Name:          QuickTime.qts_unloaded
      Fault Module Version:          0.0.0.0
      Fault Module Timestamp:          4ea5d609
      Exception Offset:          653f1040
      Exception Code:          c0000005
      Exception Data:          00000008
      OS Version:          6.1.7601.2.1.0.768.3
      Locale ID:          1033
      Additional Information 1:          0a9e
      Additional Information 2:          0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:          0a9e
      Additional Information 4:          0a9e372d3b4ad19135b953a78882e789

    I am encountering the same thing as I am trying to restore my iPhone. How to fix this? I tried repairing iTunes. Still having the issue.

  • Problem signature:   Problem Event Name:     BEX   Application Name:     iTunes.exe   Application Version:     11.0.1.12   Application Timestamp:     50c8fc7e   Fault Module Name:     StackHash_0a9e   Fault Module Version:     0.0.0.0   Fault Module Times

    ITunes app crashed after startup with following errors.
    Problem signature:
      Problem Event Name:                        BEX
      Application Name:                             iTunes.exe
      Application Version:                           11.0.1.12
      Application Timestamp:                     50c8fc7e
      Fault Module Name:                          StackHash_0a9e
      Fault Module Version:                        0.0.0.0
      Fault Module Timestamp:                  00000000
      Exception Offset:                                00000000
      Exception Code:                                  c0000005
      Exception Data:                                   00000008
      OS Version:                                          6.1.7601.2.1.0.256.4
      Locale ID:                                             1033
      Additional Information 1:                  0a9e
      Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:                  0a9e
      Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
    Any ideas, tried reinstalling ITunes, no change.

    I am encountering the same thing as I am trying to restore my iPhone. How to fix this? I tried repairing iTunes. Still having the issue.

Maybe you are looking for