ITunes.exe - Entry Point Not Found after reinstall

OK so I am using Windows XP, 32bit machine but it does 99% of my work
Said yes to iTunes 12.1 update, iTunes nolonger runs on PC but pops up a warning window
iTunes.exe - Entry Point Not Found
The procedure entry point CMTimeConvertScale could not be located in the dynamic link library CoreMedia.dll
OK'ing this
produces new window: -
iTunes was not installed correctly, Please reinstall iTunes
error 7 (Windows error 127)
Uninstalled iTunes 'only' from the Control Panel
Reinstalled iTunes version 11.1.5 (Windows XP 32bit) which did run on PC
Still see the same error. A bit stuffed as my music is in linbo.
A fix would be wonderful.
Thank you folks

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. CoreMedia.dll is part of Apple Application Support.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Similar Messages

  • After upgrading to 10.5 itunes.exe entry point not found. tried reinstalling 3 times gives error 7, tells me to reinstall. help please!

    After upgrading to itunes 10.5 itunes.exe - entry point not found message appears. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll (this mesage appeared) Reinstalled 3 times then I get message itones not installed correctly error 7. I give up. Help!

    I started up and plugged in my iPad  and then the following message came up:
           iTunes
    ❗️This iPad cannot be used because the required software is not
        Installed. Run the iTunes installer to remove iTunes, then install
        the 64-bit version of iTunes.
                                                                                             OK
    I then proceeded to the "iTunes64Setup" expanded folder to load "AppleMobileDeviceSupport64"
    Started the install and then received this message:
          Apple Mobile Device Support
    ❗️Service 'AppleMobile Device' (Apple Mobile Device)
        failed to start. Verify that you have sufficient
        Privileges to start system services.
       Abort.               Retry.                Ignore
    I tried all tree options, last being ignore.
    I continued to download the other 2 you suggested with out any drama.
    I did a system restart and then opened iTunes.
    Connected my iPad
    Then message appears:
          iTunes .exe - System Error
    ❌ The program can't start because CoreAdioToolbox.dll is missing from
          Your computer. Try reinstalling the program to fix the problem.
                                                                                           OK
    Press OK and then the next message:
           iTunes
    ❌ iTunes was not installed correctly. Please reinstall iTunes.
          Error 7 (Windows error 126)
                                                                                           OK
    Any suggestions?

  • ITunes.exe - Entry point not found error after reinstalling

    I'm not sure on when this started to happen
    iTunes gives me this error even after i reinstalled iTunes several times.
    iTunes.exe - Entry Point not found
    The procedure entry point
    AVCFURLAssetInheritURIQueryComponentFromReferencingURIKey could not be located in the dynamic link library G:\iTunes.dll
    After pressing OK, it gives me this
    iTunes was not installed correctly. Please reinstall iTunes.
    Error 7 (Windows error 127)
    Thank you in advance.

    Hello crystal_qing
    Check out the article below for general troubleshooting when you are having issues installing iTunes on your PC. You may need to  remove content from the Temp folder and even remove iTunes and its related software and then reinstall iTunes.
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Regards,
    -Norm G.

  • Why is my itunes not installing properly? I installed it and it was fine, then it started to show Errors. iTunes exe - Entry Point not Found. And the Error 7 (Windows error 127).Itsays to reinstall iTunes. I did that and same error. new pc, same on old

    Why is my itunes not installing properly?
    I installed itunes day before yesterday,  I spent hours last night linking all my music photograph and movie files, its a new windows 8 laptop.
    I plugged in my 64GB ipad 3 rebooted it and reloaded all the information I wanted on it, took hours... finally completed this this morning. After this I restarted the laptop to configure my icloud link for the laptop (which I installed last night while I was loading files, I chose to restart later)
    on completion I turned my laptop off for a few hours, when I turned it back on I went to itunes to connect my iphone to do the same and I got this message:
    iTunes exe - Entry Point Not Found
    The procedure entry point
    AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not
    be located in dynamiclink library F:\Programmes\iTunes.dll
                                                                                               OK
    then after pressing 'OK' the following message:
    iTunes
    iTunes was not installed correctly. Please reinstall iTunes
    Error 7 (Windows error 127)
    I went back to apple website to reinstall iTunes, first reinstalled it same again, then unsinstalled it and the reinstalled it, same again.
    The same thing happened with my old lap top and I replaced it with this new one at the start of the week.
    Has anyone any idea what is going on and how to rectify this problem, I am now going on 3 weeks without iTunes.
    Regards,
    Damian36

    I started up and plugged in my iPad  and then the following message came up:
           iTunes
    ❗️This iPad cannot be used because the required software is not
        Installed. Run the iTunes installer to remove iTunes, then install
        the 64-bit version of iTunes.
                                                                                             OK
    I then proceeded to the "iTunes64Setup" expanded folder to load "AppleMobileDeviceSupport64"
    Started the install and then received this message:
          Apple Mobile Device Support
    ❗️Service 'AppleMobile Device' (Apple Mobile Device)
        failed to start. Verify that you have sufficient
        Privileges to start system services.
       Abort.               Retry.                Ignore
    I tried all tree options, last being ignore.
    I continued to download the other 2 you suggested with out any drama.
    I did a system restart and then opened iTunes.
    Connected my iPad
    Then message appears:
          iTunes .exe - System Error
    ❌ The program can't start because CoreAdioToolbox.dll is missing from
          Your computer. Try reinstalling the program to fix the problem.
                                                                                           OK
    Press OK and then the next message:
           iTunes
    ❌ iTunes was not installed correctly. Please reinstall iTunes.
          Error 7 (Windows error 126)
                                                                                           OK
    Any suggestions?

  • Error messages - DDE Server Windows itunes.exe - Entry point Not found and iTunesHelper.exe - The procedure entry point asl_add_log_file could not be located in the dynamic link Library ASL.dll

    Hi
            I have tried to research these problems I am getting, but have not been able to resolve them.
    1st is the above DDE Server Windows iTunes.exe - entry point not found.
    This only occurs when I try to start iTunes.
    if I click ok , several times, iTunes will start but slowly.
    If at any time I have to reboot my computer I get
    iTunesHelper.exe - the procedure entry point asl_add_log_file could not be located in the dynamic link library ASL.dll
    if I click 3 times OK it goes away.
    To this end I have uninstalled iTunes and rebooted my machine then gone to iTunes web site and downloaded the latest version.
    Installing it but still get the same errors on reboot and trying to run iTunes
    Anyone any ideas please.
    I have a self build PC it has an Intel core 2 quad Q6000 @ 2.40GHz
    Ram 4.00GB
    32bit OS
    Windows 7 Ultimate SP1
    Firewall - Zonealarm
    Virus   -  Zonealarm
    Thanks in advance
    Steve
    Message was edited by: Ybslik
    Message was edited by: Ybslik

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

  • When i open iTunes i get this message "iTunes: iTunes.exe - Entry Point Not Found" "The procedure entry point RefAudioFileWritePackets could not be located in the dynamic link library CoreAudioToolbox.dll." how do i fix this!

    when i open iTunes i get this message "iTunes: iTunes.exe - Entry Point Not Found" "The procedure entry point RefAudioFileWritePackets could not be located in the dynamic link library CoreAudioToolbox.dll." how do i fix this!

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
    Does iTunes launch properly now?
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
    Re: I recently updated to vista service pack 2 and I updated to itunes

  • ITunes.exe - entry point not found - VideoToolbox.dll error - can't open!

    hello, can somebody please help me...
    Everytime i open iTunes it comes up with this error message:
    The procedure entry point VTSelectAndCreateVideoDecoderInstance could not be located in the dynamics link libary VideoTookbox.dll.
    I've tried uninstalling, reinstalling, and deleting all iTunes and Quickime files and programs but it still wont work...
    Please help me, Thanks!

    *Replying to smyth_m*
    So I followed the instructions and downloaded the newest version of iTunes like it told me, but after I did that, When I would attempt to get on iTunes an iTunes.exe - Entry Point Not found messege would come up. And it says The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll.
    That's a different one, smyth. At the moment, you could try basiam's workaround from the following post:
    http://discussions.apple.com/thread.jspa?messageID=10444196#10444196
    ... however, this could possibly cause trouble in its own right next time you upgrade iTunes, given that there will be a misplaced, older SQLite3.dll in system32 ... So be sure to remember you've got that dll down there, and if you get an odd message about SQLite3.dll when you try launching iTunes *after your next iTunes upgrade,* delete the old copy of the dll in system32 and see if you get a normal launch without it there.

  • Updated itunes and getting errors messages: iTunes.exe-Entry Point Not Found

    After updating itunes, I get the message iTunes.exe-Entry Point Not Found. The procedure entry point AVCFPlayerEnableHardwareAcceleratedVideoDecoderKey could not be located in the dynamic library AVFoundationCF.dll.
    Then another error message tells me: iTunes not installed correctly. Please reinstall.  Error 7 (Windows error 127). I've tried to repair which looks successful until I try the desktop shortcut as well as going into the exe file in program files. Still the same message.  Operating a windows XP service pack 3 with 32 bit. Help would be most appreciated.--No problems with itunes until this recent update.

    iTunes.exe-Entry Point Not Found. The procedure entry point AVCFPlayerEnableHardwareAcceleratedVideoDecoderKey could not be located in the dynamic library AVFoundationCF.dll.
    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

  • Itunes 11 will not open itunes.exe entry point not found

    Every time I try to launch itunes this message box shows up:
    iTunes.exe - Entry Point Not Found
    The procedure entry point kCVKmageBufferChromaSubsampling_420 could not be located in the dynamic link library CoreVideo.dll
    When I click ok another message box shows up:
    iTunes
    iTunes was not installed correctly. Please reinstall iTunes.
    Error 7 (Windows error 127)
    I redownloaded itunes directly from apple.com. I clicked on the repair option. It completed. The error is still happening. I have been using itunes for over 10 years with no problems until now.
    PC info:
    Windows 7 32bit service pack 1 x86
    3GB ram
    AMD Athlon 64 processor 3500+ 2.20 GHz
    NVIDIA GeForce 210 video card 2.2 GB
    Also I used the Firefox browser to download itunes.

    update:
    I just restarted my computer. Now it seems to be working fine. Next time I update itunes I'll just restart my computer twice.

  • Error: iTunes.exe Entry Point Not Found

    I recently upgraded my iTunes to the latest version and am now receiving the following error when I try to open it:
    "iTunes.exe - Entry Point Not Found
    The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll."
    and when I click ok it then gives me this error message
    "iTunes was not installed correctly. Please reinstall iTunes.
    Error 7 (Windows error 127)"
    I have tried the following several times:
    reinstalled/repaired iTunes
    reinstalled/repaired QuickTime
    reinstalled/repaired Apple Software Update
    reinstalled/repaired Apple Application Support
    none of which have worked.  I get the error each time i try to open iTunes and then it just shuts down.
    I have also tried to open iTunes in safe mode - per a recommended solution on another thread - which does not work.  And I changed my control panel/quicktime/audio settings to safe mode - per a recommended solution on another thread - which does not work.
    I have not added any other new software
    I am on an old lenovo T61 laptop with Windows XP
    Any and all suggestions would be greatly appreciated. 
    Thanks in advance!
    Charles

    This thread has a solved star:
    http://discussions.apple.com/thread.jspa?messageID=3918542

  • My iTunes won't open on Windows XP. iTunes.exe - Entry point not found, Error 7 (Windows Error 127)

    When I open iTunes, I get a message saying under iTunes.exe - Entry Point Not Found, it says, The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. And I'm not talking about the AppleSyncNotifier.exe. Along with that, I get the message saying, "iTunes was not installed correctly. Please reinstall i Tunes." Error 7 (Windows Error 127). That's why I'm unable to open iTunes. I sure hope to see a solution to those problems soon.
    I know I've mentioned this before, but I've now given a little more info to make my explanation more clear.

    Try this one from Article TS3074
    iTunes for Windows: "Error 7" message when opening iTunes
    http://support.apple.com/kb/TS3074

  • Have tried several times to do all that was suggested BUT itunes still not downloading correctly....still recieving---iTunes.exe - entry point not found - the procedure entry point. AVCFPlayerSppliesMediaSe;ectopmCriteriaAutomaticallKey could not be locat

    HELP!! I'm trying to reinstall my iTunes BUT keep getting this---iTunes.exe-entry point not found-the procedure entry point AVCPlayerSuppliesMediaSe;ectopmCriteriaAutomaticallKey Could not be located in the dynamic link library AVFFoundationCF.dll.
    itunes was not installed correctly. error 7 (windows error 127) --
    I have already tried (4 times) completely unstalling and reinstalling as was suggested But didn't fix the problem.
    HELP---CAN ANYONE SUGGEST SOMETHING ELSE TO TRY??

    HELP!! I'm trying to reinstall my iTunes BUT keep getting this---iTunes.exe-entry point not found-the procedure entry point AVCPlayerSuppliesMediaSe;ectopmCriteriaAutomaticallKey Could not be located in the dynamic link library AVFFoundationCF.dll.
    That one can be produced if you have an older version of Apple Application Support on the PC than is required by iTunes version 11.1.4.62. (The required version of Apple Application Support is included in the standard iTunes installers, but for some reason it hasn't been updating properly for some folks.)
    Let's try updating your Apple Application Support to version 3.0 by doing a standalone Apple Application Support install.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, can you launch iTunes without the error now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • ITunes.exe - Entry Point Not Found - QTCF error popup - can't open iTunes

    Hi, whenever I try to open iTunes I also get this message:
    iTunes.exe - Entry Point Not Found
    The procedure entry point QTCF_CFUniCharGetUnicodePropertyDataForPlane could not be located in the dynamic link library QTCF.dll
    I've tried uninstalling iTunes then reisntalling, uninstalling Quicktime, rebooted and I still get the same problem. I also moved QTCF.dll into iTunes. Still get the same error. I also tried a system restore, and I STILL get the same error.
    I tried removing everything and turing off my antivirus and I still get this message and my iTunes does not work. Also when the message comes on it will not go away until I re-start my system. Any help out there on this???
    Thanks.

    *Replying to smyth_m*
    So I followed the instructions and downloaded the newest version of iTunes like it told me, but after I did that, When I would attempt to get on iTunes an iTunes.exe - Entry Point Not found messege would come up. And it says The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll.
    That's a different one, smyth. At the moment, you could try basiam's workaround from the following post:
    http://discussions.apple.com/thread.jspa?messageID=10444196#10444196
    ... however, this could possibly cause trouble in its own right next time you upgrade iTunes, given that there will be a misplaced, older SQLite3.dll in system32 ... So be sure to remember you've got that dll down there, and if you get an odd message about SQLite3.dll when you try launching iTunes *after your next iTunes upgrade,* delete the old copy of the dll in system32 and see if you get a normal launch without it there.

  • TS3212 iTunes.exe - Entry Point Not Found

    Canot open iTunes after downloading recent updates:  Here's the text of the error message:
    iTunes.exe - Entry Point Not Found
    4 The procedure entry point
    ?videoTracks@QTMovie@©QBE?AV?SVectcr©V?SRefPtr©VQTTracL©
    @@***©@SOA@VCrashOnOverflow@2@©***@©XZ could not be
    located in the dynamic link library C:\Program Files (xSó)\Common
    Files\Apple\Apple Application Support\WebKit.dll.
    OK

    I continued to search the forums and came across this one:
    https://discussions.apple.com/message/24606602#24606602
    I want to give credit to naminegalgbigglesfor solving this one for me.  Here is the solution that he posted:
    Copy QTMovieWin.dll from
    c:\Program Files (x86) \Common Files\Apple\Apple Application Support
    and paste into
    c:\Program Files (x86) \ iTunes
    I believe that I recall having problems with this dll each time I have upgraded iTunes, so I'll be sure to check this particular one next time too.

  • ITune.exe entry point not found

    Hi G's (Geniuses)
    I installed the new itune 9.0.3 and now i'm getting a error message that says "itune.exe-entry point not found" box. In the box i the goes on to read "The procedure entry point QTCF_CFUniCharGetUnicodePropertyDataForPlane could not be located in dynamic link library QTCF.dll. and the box will not close untill i uninstall QuickTime Player. I when't as far as reinstalling the itune and QT Player under a new user account, still no good. Uninstall and installed countless times still can't get it to work contacted support still no good. i'm fresh out of idea's any suggestion? Any one out there with the same problem

    "The procedure entry point QTCF_CFUniCharGetUnicodePropertyDataForPlane could not be located in dynamic link library QTCF.dll.
    That one is most commonly caused by an older, misplaced copy of QTCF.dll lurking around on your system.
    The first place to look for one on a 64-bit system would be in the C:\Windows\sysWOW64\ directory. Can you see a QTCF.dll in there? If so, try dragging it out onto the desktop. Are you able to launch QuickTime/iTunes now?

Maybe you are looking for

  • IPhoto won't install update and won't allow me to access my photos since I installed the Maverick update

    Since I installed the new Maverick update, iPhoto crashes on my Macbook Pro at the final stages of install and I am not able to acces my photos because a widow pop up telling me that iPhoto is being updated but it is not updating.  What do I do now?

  • We are using Skype 6.18 Business version and requi...

    We are using Skype 6.18 Business version, and require .admx and .adm files for GPO setting. Kindly provide us with the lastest .admx and .adm files as soon as possible. We need to provide the support to clients and the requirement is on priority. Tha

  • I redeemed $25, my previous bal THEN VANISHED

    I had a balance of $31 dollars for MY APPLE ID I bought an itunes card valued at $25, I then REDEEMED that card and INSTEAD OF MY BALANCE becoming $56 <--- Like It Should Have...... My NEW Balance showed ONLY $25,    Yes, I logged out and logged back

  • Table link between shipment stage and delivery

    Hi,   I am trying to find the tables which will tell me the delivery number belongs to which shipment stage.   Shipment stage I am getting from VTTS table and delivery from LIPS.   Pls. let me know. Points will be awarded. Thanks.

  • Create directory tree

    Hi Guys, I wanted to create a chart/graph or whatever you name it, I don't know if this can be done or not, My idea is to create a webpage where anyone can access the page and they will click the browse button and point the folder/directory and the p