Itunes extra.ite does not run, im using itunes 10.2.1 on an imac OSX 10.5.8

I downloaded the greenlantern movie with itunes extra content, but the itunes extra.ite does not run, it just apear with a blac window with the music on... bu no image, should i upgrade the itunes?

Click here. This version can't sync any device running iOS 7.
(90145)

Similar Messages

  • Why will firefox not start on my laptop? can't uninstall or open the profile manager either. it simply does not run. it used to work fine until i had to restore my system.

    had firefox 4.0 & have been a user of firefox for a few years now. never had any problems. had to do a system restore after my computer detected a virus of some sort & i couldn't do anything. the virus kept popping up a bogus add for me to buy an antivirus program. had to restart laptop in safemode to initiate the restore. ever since then firefox has not opened. can't even uninstall it or open the profile manager. anything that has to do with firefox will simply not run/open at all. i'm stumped.

    System restore can cause problems as well as solve them, it has probably completely mucked up your Firefox installation.
    Try deleting your Firefox installation directory, the default location on 32 bit Windows is C:\Program Files\Mozilla Firefox\
    Now re-install Firefox, it should pick up your current profile folder so you should not lose your bookmarks, passwords etc.

  • Itunes 9.2 (64 bit)  does not run

    All of a sudden my iTunes 9.2 (64 bit) on Windows 7 does not run anymore. Repairing the setup did not help. Removing and re-installing the application helped only 1 time, after that the program again did not run anymore. And during that 1 run it did load my (big) library but could not find any of the songs!
    Using Window's system restore (back 3 days) did not solve the problem either.
    I had been using iTunes 9.2 for a few weeks without a problem. Why doesnt it suddenly not run anymore? What can I do? Thanks for helping!

    No error message at all. No clue either.
    A few times the program DID run - after around 20 mins waiting it suddenly appeared...
    A few other strange things:
    - After double clicking the iTunes icon something DOES start: the task manager shows the iTunes process, sometimes with up to 40-50% of the CPU capacity, sometimes with low memory usage, sometimes higher
    - When trying to uninstall iTunes (completely) with Revo Uninstaller: the program does not appear in the REVOapplication list
    - When trying to uninstall it through Control Panel I can uninstall it.
    - I disabled my iTunes library, to be sure that the trouble has nothing to do with that. Maybe it could be too big (around 40 thousand songs!) or corrupt. But even without a library the startup is not possible - or incidentally taking 20 mins or more.
    - I ran Advanced System Care to fix registry problems and defragmenting the systems files - no change.
    What can be wrong? And more important: what can be done?

  • My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows proc

    My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows processes, while Firefox does not run.
    I manually deleted Firefox from the list once I have Windows processing.
    And when I clicked on Firefox, Firefox will open quickly and easily.
    Firefox process in Windows Processes names list called "firefox.exe * 32" is.
    Please try to solve my problem, my problem is how to solve?

    Hi, are you saying that you start Firefox and it stalls -- you can see it in the Task Manager but it never displays -- but if you kill that process and start Firefox again it starts up properly that second time?
    If you look at the statistics available in the Task Manager's processes tab such as bytes read or other bytes, can you see whether Firefox is doing anything at all? ''Note: You might need to add columns if your Processes tab isn't set up to display statistics. You can do that from the View menu.''
    You might already have seen these troubleshooting articles. If not, does anything here help:
    * [[Firefox won't start - find solutions]]
    * [[Firefox hangs or is not responding - How to fix]]

  • Adobe Reader XI does not run using Win7 Pro

    Trying to run Adobe Reader XI on a PC running Win7 Pro, but it starts, gives gray screen, then shuts down.  However, I can read pdf docs within Google Chrome.
    I was running Reader version 10 with no problem, went to upgrade to 11, and now no versions work, as I've tried to uninstall and reinstall ver 9,10,11 but none work.  Help!

    I ran the script but does not fix issue.
    When I run Adobe Reader or click on a .pdf file on my drive, the Adobe reader program starts, but gives a gray screen while my hard drive spins, then program closes.
    any ideas?
    Thanks,
    Ken
    Pat Willener <[email protected]> wrote:
    =============
    Pat Willener http://forums.adobe.com/people/pwillener created the discussion
    "Re: Adobe Reader XI does not run using Win7 Pro"
    To view the discussion, visit: http://forums.adobe.com/message/5211526#5211526

  • I m working in an organization where web-sense is installed to block all irrelevant sites, i have installed itunes but it does not run a window pops up with message 'itunes is not connected to the network' can anyone help me out?

    i m working in an organization where web-sense is installed to block all irrelevant sites, i have installed itunes but it does not run a window pops up with message 'itunes is not connected to the network' can anyone help me out?

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • Weblogic 6.1 sp2 , application which used to run on wl 6.1 sp1 does not run anymore

    Hi
    For some reason, my application 'portal' does not run on weblogic 6.1 sp2,
    It used to run fine on 6.1 sp1 .
    I am attaching the weblogic.log file with this msg.
    Thanks,
    Regards,
    Lalitha
    [weblogic6.1sp2logs.txt]

    Tobin is right, my apoplication is called "portal", I am not using WLPortal. Anyway,
    I managed to resolve my problem,I had sax2 , xp and xt parsers placed in the WEB-INF\lib
    directory of my application in addition to my own jar file. I removed the parsers
    , and now my application is running fine.
    It is strange though, since my application used to load and work flawlessly on
    weblogic 6 as well as weblogic 6.1 sp1 with the parsers in the lib directory....
    Anyhow, thanks a lot for the help.
    Regards,
    Lalitha
    "Tobin Paterson" <[email protected]> wrote:
    >
    Having applied WLS 6.1 sp2 upgrade today I am seeing the same fault.
    I am not using
    WL Portal. Also I think the original poster's application just happens
    to be called
    "portal" and is not using WL Portal.
    cheers,
    Tobin.
    "BEA Support" <[email protected]> wrote:
    Hello,
    Only WLCS and/or WLPS 3.5 sp 2 support WLS 6.1 sp 2
    WL Portal 4.0 support only WLS 6.1 sp 1.
    Regards,
    Developer Relations Engineer
    BEA Support
    "Lalitha" <[email protected]> a écrit dans le message de news:
    [email protected]..
    Hi
    For some reason, my application 'portal' does not run on weblogic
    6.1
    sp2,
    It used to run fine on 6.1 sp1 .
    I am attaching the weblogic.log file with this msg.
    Thanks,
    Regards,
    Lalitha

  • Cron job not running - script uses rsync, ssh (with id_rsa)

    Does anyone know how to get cron to run a rsync/ssh script which uses id_rsa for passwordless logins?
    I have a backup script I have slaved for months over that works wonderfully when running it from the command line.
    It uses rsync and connects with SSH (passwordless using ssh keys). I have setup id_rsa and id_rsa.pub for passwordless logins (this is my user account, and connects using root@ to the server)
    As stated all works find when run from the command line. But when I setup a cron job to run this file (exact same line I run from the command line) it does not execute. Actually, it does run, as I have an email notifiction which sends to me. It is just the rsync/ssh part that does not run.
    I have spent days and days trying to figure it out. No error messages occur, nothing.  Took me a while to find out cron is emailing the user account on Lion the messages (not to a proper email address).
    The error shows a permission denied, which I believe to be the cron user cannot use the id_rsa/ssh connection.
    Cron is running the script as my user, the same I use on the command line. I even tried copying the id_rsa to the root user .ssh folder in case cron is running as root but that does not work either.
    So does anyone know how to get cron to run this rsync/ssh script which used id_rsa for passwordless logins?
    Thanks a lot

    YES! Got it working, finally!
    So the issue is indeed cron/launchd not being able to access the ssh-agent which holds the key.
    So this is the solution...
    Download keychain for Mac:
    http://www.funtoo.org/wiki/Keychain
    Then once its installed and configured, the script to run needs this added to the top:
    eval `keychain --noask --eval id_rsa` || exit 1
    Note I am using id_rsa whereas keychains instructions refer to id_dsa so I just changed it and it works OK.
    When the script runs the first time it asks for the key password. Then it works from then on.
    What I do not know yet is will I need to re-enter the password when I logoff/logon again. That will cause an issue as I auto restart the Mac every day which means if I am off for a few days backup will stop (can you see the madness in this issue!).

  • REPORT DOES NOT RUN CORRECTLY , URGENT PLEASE HELP

    Hi,
    I am trying to run a report from visul basic screen, but it does not run correctly. Here is how I am running the report. There is a screen developed in VB This screen prompts the user for user id and password. Once it gets that, it connects to the oracle database and pulls out a column from a table. And passes that value as a parameter to the report. Now I am calling the the report for each individual value . There are 21 value being pulled out of the database and it invokes the report 21 times. So there are 21 report engines gets started. Is there a better way to do that ? Secondly when I pass the parameter , some parameters does not pass correctly I guess , because its not generating any out put . Like out of 21 may be 10 or 11 reports gets generated correctly but rest of the reports are blank. I debug the screen i saw that the parameter value is correct, everything seems good. But still the reports are comming blank. Any Idea why it is so ? The command line that i am using in VB screen is
    Shell "C:\progra~1\ora95_2\bin\rwrun60.exe P:\Business_Analysis_&_Reporting_Tool\Test_REPORT_Templates\STORE_TYPES\Baby_Distribution_Report.Rdf USERID=" & UID & "/" & PWD & "@cposp201 DESFORMAT=PDF DESTYPE=FILE DESNAME=" & txtPath.Text & Replace(strName, " ", "_") & ".PDF BRND='" & adoRecBrand!Brand & "' PRINTJOB=NO PARAMFORM=NO"
    In the above command " adoRecBrand!Brand " is the parameter thats being passed. This is actually a recordset and brand is the column in it. When I debug the screen , I see the value also there. But the report comes out blank. Please help. This is urgent.
    Thanks
    Feroz

    The way you call reports is not scalable. If you have 100 records come back from database, you would end up launch 100 engines at the same times, which probably will blow up your machine. You should use oracle reports server to do that. You can either use rwcli60 to submit the job to reports server, or invoke rwcgi60 from URL.
    I am afraid some of reports engine failed to start and you get nothing back in your case.
    After switch to use reports server achitecture, if you still see some report is blank in your application, then you can run that report with that special set of parameters manually and see if any problem with the report itself.
    Hope this helps.
    Thanks,
    -Shaun

  • Farm Remote App 2012 R : Your system administrator does not allow the use of default credentials to log on to Work Resources

    Hi
    Here is the situation:
    I have a Farm with 3 servers W2012R2 in a Domain
    Server1                           Server 2                                  
    Server3
    RDSession Host            RDSession Host                            
    RDSession Host
    Connection Broker        Connection Broker (Passive)
    RD Web Access
    2 DNS Alias : - poc.mydomain.local (Use for the RD Web Access and points to Server1
                        -poccb.mydomain.local (Use for the Connection Broker and points to Server1)
    I have setup the Connection broker in HA with Server2 as Passive Server : DNS Round Robin poccb.mydomain.local (Server1)
    The certificate Manager has generated 2 CA certificates :
    - 1 for the RD Web Acc (poc.mydomain.local
    -1 for Connection Broker SSO and for publishing
    I have created 1 Group Policy for these 3 servers and 1 GP for my client Windows 7 SP1.
    Server GPO :
    Computer/Administrative Templates/Windows Components/Remote Desktop Services/Remote Desktop Session Host/Security
    Always prompt for password upon connection=Disabled
    Require use of specific security layer for remote (RDP) connections : SSL (TLS 1.0)
    Set client connection encryption level : High Level
    Client GPO
    Computer/Administrative Templates/System/Credentials Delegation = Allow delegating default credentials (Concatenate OS defaults with input above)
    TERMSRV/POCCB.mydomain.local
    I use no Gateway and in my collection,I have activated SSL (Like in my Server GPO)
    I have now problem with SSO.
    Connection with remote desktop client with server name = poccb.mydomain.local
    Your system administrator does not allow you the use of default credentials to log on to the remote computer poccb.mydomain.local because its identity is not fully verified
    If in my client GPO I add the physical name of the 3 servers, it works :
    TERMSRV/Server1
    TERMSRV/Server2
    TERMSRV/Server3
    Open RDP Files with server name = poccb.mydomain.local
    if my connection broker connects me on Server1 , no problem
    But If I arrive on Server2 & Server 3=
    Your system administrator does not allow the use of default credentials to log on to Work Resources
    I have searched on internet. No result for " to log on to Work Resources"
    Any idea ? Thanks for your help

    Hi,
    Thank you for posting in Windows Server Forum.
    Firstly check that, your user is using domain\username to enter the credential in the dialog box.
    Now for a try, you can edit .rdp file with notepad and just place “enablecredsspsupport:i:0” line in it, save it an launch to check whether you are facing same issue.
    As you are using windows 7 then upgrade to RDP 8.1. Also as you have already enter the FQDN name of server under “Allow delegating default credentials”. For a try please enable and configure for all the remaining settings as follow and check the result.
    Start / Run / gpedit.msc / Computer Configuration / Administrative Templates / System / Credentials Delegation, and make sure you have the following four options enabled and configured:
    Allow Delegating Default Credentials with NTLM-only Server Authentication
    Allow Delegating Default Credentials
    Allow Delegating Saved Credentials
    Allow Delegating Saved Credentials with NTLM-only Server Authentication
    Finally, open a command prompt and use “gpupdate /force” command to apply the policy directly.
    More information:
    Remote desktop credentials did not work
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • ICal does not run one event that has a Applescript attached to it. 24u?

    I have a number of reoccurring events in iCal that run a Applescript.  Tow of them refuses to run.  I have tried it as a Applescript and saved it as a run only and neither works (the script run fine if I test them by hand).
    so I thought I have a look in the log and found this 24u information. 
    can anybody help out here? I am not sure why it appears, if it is good or bad, how to fix it and if it is at all realted to my problem.  Other scripts seem to run well, it is this one and an other one that do not get activated by iCall.
    They run on a MM running 10.6.8, iCall 4.0.4 (1395.7)
    Thanks.
    Log today:
    19/09/2011 07:00:00          iCal Helper[211]          Error loading /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX:  dlopen(/Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX, 262): no suitable image found.  Did find:
              /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: mach-o, but wrong architecture
    19/09/2011 07:00:00          [0x0-0x12012].com.apple.iCal.helper[211]          iCal Helper: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/24U Appearance OSAX.osax" declares no loadable handlers.
    19/09/2011 07:45:01          iCal Helper[317]          Error loading /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX:  dlopen(/Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX, 262): no suitable image found.  Did find:
              /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: mach-o, but wrong architecture
    19/09/2011 07:45:01          [0x0-0x28028].com.apple.iCal.helper[317]          iCal Helper: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/24U Appearance OSAX.osax" declares no loadable handlers.
    19/09/2011 14:30:02          iCal Helper[1019]          Error loading /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX:  dlopen(/Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX, 262): no suitable image found.  Did find:
              /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: mach-o, but wrong architecture
    19/09/2011 14:30:02          [0x0-0x73073].com.apple.iCal.helper[1019]          iCal Helper: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/24U Appearance OSAX.osax" declares no loadable handlers.

    Hi,
    It looks like the version of 24U's Appearance OSAX you have installed does not run on Lion.
    I would contact the developer to see if they have a version that does yet. See http://www.24usoftware.com/AppearanceOSAX
    Alternatively you could look to see if the Applescript really needs to use it.
    Best wishes
    John M
    Edit: If you are running Snow Leopard, I think you may need to make the application "iCal Helper" (which you'll find in iCal's application package) run as 32 bit. I'd also suggest you check this with 24U.

  • Add does not run with sql server 2008

    Hi all,
    My add on in the development environment does not run with SQL SERVER 2008. It ran well with SQL Server 2005 and sap b1 2207 B.
    On executing the project file system throws an error "YOU ARE NOT CONNECTED TO THE COMPANY"
    we are trying this scenario on a test machine where SAP B1 2007B with temporary license for one month and SQL server 2008
    is installed.
    Help needed.
    Thanking you
    Pradnya

    Hi Use this
    Dim i as integer
    i=oCompany.Connect()
    if i<> 0 Then
    msgbox(ocompany.GetLastErrorDescription ())
    end if
    the you will get the error description also use try catch wherever necessary
    Alternatively you can use
    Dim SboGuiApi As SAPbouiCOM.SboGuiApi
    Dim sConnectionString As String
    Set SboGuiApi = New SAPbouiCOM.SboGuiApi
    sConnectionString = Command
    SboGuiApi.Connect sConnectionString
    Set SBO_Application = SboGuiApi.GetApplication()
    Set ocompany = New SAPbobsCOM.Company 'initialate DI company object
      ocompany = SBO_Application.Company.GetDICompany
    HTH,
    Atul

  • Premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."

    premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."   Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?

    Jurgen Freund
    Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
    I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
    How to fix the ERROR 126 when you open OpenGL programs - YouTube
    The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
    LoadLibrary failed with error 126: cant find the required
    Please let us know if that worked for you.
    Thank you.
    ATR
    Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update.

  • Osx 10.8.4 does not run macbook pro late 2011

    does any have issues after installing osx 10.8.4???  because i have an issue after i update my macbook pro late 2011 ,it doesn't start and only stay on the mac logo and appears the pointer i restarted many times and does not work the only option i had is  to reinstall the osx 10.8.3. can anybody help me with this issue??  thank you.

    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Lightroom 5.6 does not run following latest CC Photoshop 2014 and Bridge updates

    I am running Creative Cloud Photography on OSX 10.9.4. Yesterday I updated Photoshop 2014 and Bridge using the CC desktop app as prompted by CC. Since then Lightroom does not run. When I open it the blue intro screen flashes up for less than a second. To try and recover I have uninstalled Lightroom (5.6) and re-installed it several times using both the CC app and directly from the Adobe website. The result is always the same. I can find nothing about this on Adobe Support although I can find others who have had the same symptoms on a web search. Their solution was to re-install Lightroom from the web site but that hasn't worked for me.  I had Lightroom installed before I went to CC and before CC included Lightroom in the Photography package. Does anyone understand this issue and can you please advise me what to try next? Many thanks.

    Okay, Solution 1 from this link Error "Unable to start correctly - 0Xc00007b" fixed it for me. But now it's asking me for the serial number which I can't find anywhere... shouldn't that go without with the cloud?

Maybe you are looking for