ITunes Extras could not be used...

I recently had to replace mthe HDD where I store my iTunes files. All of my movies appear to have been restored from backup but each of my extras displays the following when I try to open (iTunes Extras only) I get the following message:
The movie "xxx-iTunes Extras" could not be used because the original file could not be found. Would you loke to locate it?
There appears to be a separate *.ite folder for every movie but I cannot locate either an .exe file or some file that woud trigger the extra content although all of the data files appear to be there and intact.
These are all digital copies which cannot be reloaded. and it seems that i AM MISSING SOMETHING OBVIOUS.
I am using a desktop PC with Win7 (32 bit).

iTunes won't "search" for the folder but if you either
use the iTunes File menu > Add Folder to Library option when adding the music
or
drag the folder into the Library listing of the iTunes Source List (left-hand column)
your problem should be taken care of.
If you don't want to keep that folder as the location for the music files, make sure that Copy files to iTunes Music folder when adding to Library has been checked in the iTunes Edit menu > Preferences > Advanced tab > General sub-tab.

Similar Messages

  • Moved iTunes library to an ext hard drive to make space on my int drive... Followed steps from apple.  Now I cannot access my music... It says: "File could not be used because the original file cannot be found.  Would you like to locate it?"

    Moved iTunes library to an ext hard drive to make space on my int drive... Followed steps from apple.  Now I cannot access my music... It says: "File could not be used because the original file cannot be found.  Would you like to locate it?"
    I moved my iTunes library to my external hard drive some time ago and I followed the directions listed here on the apple support page.  It did copy my library and now is on my hard drive... I can open iTunes and use it to sync all of my devices but I would like to play my music... I can see all of my music files but can not play them if I click on an album or song it says the following:  "(file name) could not be used because the original file cannot be found.  Would you like to locate it?"  I click locate but do not know where to go from there?  I need a way to access all files and not to hunt down one at a time on my hard drive... I am pretty sure I deleted the original library to make space on my internal drive which was the reason for moving it.  I have tried and tried to fix it and do not have a lot of time to do so with a one and two year old at my house who do not like it whenI sit down at my computer.  What to do???  Any help is much appreciated!!!

    See Make a split library portable. Move all of the bits of the library together in the the correct shape and it should work. Or undo exactly what you did and then start over.
    If you're a former Windows user don't try merging two folders together that have the same name by dropping one into the same folders as the other, as that goes badly on a Mac.
    tt2

  • I recently reset my computer and copy my music from an external hard drive to my itunes library.  When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found".  need help

    I recently reset my computer and copy my music from an external hard drive to my itunes library.  When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found".  But when I have my external hard drive plug in the song will play with no problem.  What do I need to do to play my music without having the external harddrive plug in ????????  Please help

    Because the location for each song in your library is on your hard drive.  If the hard drive isn't there, how can iTunes play it?
    You'll have to move/copy the music from your hard drive to your computer's hard drive.
    Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
    -Delete EVERYTHING from iTunes, so that your library is now empty.
    -Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down.  You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
    -Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes.  Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked.  You can close Preferences now.
    -Now, drag and drop your music from your hard drive into your iTunes library.  iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
    Shouldn't have any more problems...

  • This is a new notification coming up with iTunes, why and how do I fix it? The song "Penny Lane" could not be used because the original file could not be found. Would you like to locate it?

    This is a new notification coming up with iTunes, why and how do I fix it?
    The song “Penny Lane” could not be used because the original file could not be found. Would you like to locate it?
    Max

    Hey xxCreepyFiaxx,
    First, I would try the following suggested steps for when you don't see content in iTunes after updating:
    Quit iTunes.
    Download and install the latest version of iTunes.
    Use the Finder (Mac) or Windows Explorer (Windows) to go to the iTunes folder that contains the iTunes library files:
    Mac OS X
    /Users/username/Music/iTunes/
    Microsoft Windows Windows XP and Windows 2000
    \Documents and Settings\username\My Documents\My Music\iTunes\
    Microsoft Windows Windows Vista and Windows 7
    \Users\username\Music\iTunes\
    Drag the iTunes Library file from the above location to the Desktop.
    Open the Previous iTunes Libraries folder in the iTunes folder.
    Locate the file named iTunes Library YYYY-MM-DD where YYYY-MM-DD is the date you upgraded iTunes (Year-Month-Day).
    Drag this file to the iTunes folder (the enclosing folder).
    Rename this file to iTunes Library.
    Open iTunes.
    You should now see your missing content in iTunes.
    via: No content shows up in iTunes after updating
    http://support.apple.com/kb/TS1967
    If that doesn't resolve the issue, then I'd go through the steps in here:
    iTunes: Finding lost media and downloads
    http://support.apple.com/kb/TS1408
    Have a good one,
    Delgadoh

  • I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found

    I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found.would you like to locate it".
    Either how do I locate it, and I've tried every trick I know, or how do I restore all of my songs from one of two sources. I have my old hard drive backedup on an external drive which should have all of my songs, and I have most of my songs on my old iPhone 3S which I'm using as a backup iPod.

    The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, one of its parent folders, or the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place. In the case of a library moved from one system to another there are also potential permissions issues. See Repair security permissions for iTunes for Windows.
    Select a track with an exclamation mark, use Ctrl-I to Get Info, then click No when asked to try to locate the track. (Due to a bug in iTunes 12 you currently have to say No twice!) Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, a folder renamed, or a drive letter has changed, it should be possible to reverse the actions. If the difference between the two paths is an additional Music folder in one path then this is a layout issue. I can explain further if that is the case.
    In some cases iTunes may be able to repair itself if you go through the same steps with Get Info but this time click Locate and browse to the lost track. It may then offer to attempt to automatically fix other broken links.
    If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
    See also Recover your iTunes library from your iPod or iOS device.
    tt2

  • After installing iTunes 10.5 update i get the following message when trying to play any song in my Library "The song could not be used because the original file could not be found. Would you like to locate it?"  how do i fix this??

    I have an iPod Classic and work on Windows 7.
    i recently installed iTunes 10.5 update and since then i cannot play any of the songs in the Library - i get the following message
    "The song could not be used because the original file could not be found.  Would you like to locate it?"
    what happened to all my songs (almost 2000) How can i get them back into my music library?
    Please help - i do not want to spend another week downloading all my cd's onto my computer !!!!!

    Try my script FindTracks. Select a few of the missing files to start with then run the script. Choose No at the first prompt so that you can check how it works track by track, then confirm or edit the location of the media folder where your files are. Once you are happy with how it behaves let it process larger numbers of tracks automatically.
    tt2

  • I tried to play my iTunes and suddenly get an error message that says "The song (name) could not be used because the original file could not be found.  Would you like to locate it now?"  It happens on all my tunes and each one I select ends up with a "?"

    I tried to play my iTunes and suddenly get an error message that says "The song (name) could not be used because the original file could not be found.  Would you like to locate it now?"  It happens on each tune I select and a "?" appears beside the song.  Does this sound familiar to anyone?

    I was not complete clear.
    Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section.  If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
    If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
    But before I would check the folders and see if the songs are really there
    In my iTune I have this, and I believe it is the default.
    Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

  • ITunes tells me "Could not be used because the original file could not be found. Would you like to locate it?"  I can locate it and all my other music, but can only open one song at a time.  How do I set it to open all my music whenever I want it?

    iTunes tells me my song selection: "Could not be used because the original file could not be found. Would you like to locate it?"  I can locate it and all my other music, but can only open one song at a time.  How do I set it to open all my music whenever I want?
    Message was edited by: Woildbill

    I just spent several hours dealing with this when switching to a new PC. It was extremely frustrating as I knew my files were on my external HD but no matter how many times I copied my old iTunes folder over the files were still missing...because dummy me had forgotten to "unhide folders" on my new PC and my old files were actually stored in a hidden folder created long long ago.
    This is how I did it on Windows 7 with iTunes 10
    1. Look in iTunes Advanced Preferences to see where iTunes is saving files. (Edit, Preferences, Advanced)
         Example: C:/Users/Woildbill/My Music/iTunes/Music
    2. Ensure you are able to see hidden files - Control Panel, Folder Option, View, Show Hidden Files
    3. Use Your Computer's Search Function to Locate the Missing File (Start, Search, type name of song - I started my search in "My Music" folder but be sure to expand to entire Computer if not found right away)
    4. In Search Results, right-click found folder and select properties. This will tell you where the file is actually stored.
    5. Use Windows Explorer (right-click start) to navigate to the location of the file. It is likley your other missing files are in the same location.
    6. In Windows Explorer, copy the newly located files to the iTumes location from Step 1 and everything should work again.
    Hope this helps!

  • I have completely disabled my iphone 3gs. It says "Iphone is diabled connect to itunes", but when I connect it to itunes, itunes says "could not connect because it is locked with a passcode you must enter your passcode on the iphone before it can be used.

    My iphone 3gs will no longer let me try passcodes and it only says "Iphone is disabled connect to itunes" well, when I connect it to my laptop, itunes says "could not connect to phone because it is locked with a passcode. you must enter your passcode on the iPhone before it can be used with iTunes" Please help!!! I have tried resetting it and all the tricks I know. Nothing works. Thanks

    You will have to restore it from Recovery Mode: http://support.apple.com/kb/HT1808

  • Recently bought  a new computer and all my music appears in iTunes as well as on my computer in a saved folder. When I try to play the music in iTunes I get an error that reads"the song could not be used because the original file could not be found."

    Recently bought  a new computer and all my music appears in iTunes as well as on my computer in a saved folder. When I try to play the music in iTunes I get an error that reads"the song could not be used because the original file could not be found. Would you like to locate it?" Hope you can help me solve this issue.
    Thanks,
    Shellyboo

    This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • My partner deleted my itunes (10) library. I use a WD external back-up and retrieved my itunes library, but when i try to play a song i get the message 'could not be used because the original file could not be found Would you like to locate it?'

    My partner deleted, by accident my itunes library. I have an iMac 10.6.7, Itunes 10. I use an WD passport as an external back up and retrieved my itunes library but now get the message "could not be used because the original file could not be found. Would you like to locate it?" so itunes is not recognised the exclamation marked songs, how do i get the retrieved files recognised. At times I get fed-up with Apple blocking files being used, although I like the product its restrictions are so silly!

    You not only have to retrieve the library file from the backup drive but the actual music files (usually stored within the "iTunes Media" folder) as well.

  • When trying to sync or listen to songs in itunes library it says the song on itunes could not be used because the original file could not be found. I am using windows 7.

    I have imported cds into my itunes and they appear on my playlist, but when I try to sync to my ipod or listen to them on my computer a message comes up stateing " the songs on itunes could not be used because the original file could not be found".  I have not deleted them and am importing them the way I always have.  This problem has only been for the last 4 or 5 months. Since updating to the last 2 itunes versions.

    The message means that iTunes can not find the original imported music files. iTunes should display a red exclamation mark next to the songs it can not find. You will need to look on your hard drive for the songs/files and than correct the file path in iTunes or just delete the files in your iTunes library and import them again.

  • When I try to play a song in my itunes libery I get an error saying "this song could not be used because the original file could not be found".  I do I restore the file?

    When I rry to paly a song in my itunes libery, I get an error saying "this song could not be used because the original file could not be found". I do I find the orginal file?

    Hello crispinofromfl,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Where are my iTunes files located?
    http://support.apple.com/kb/ht1391
    Have a nice day,
    Mario

  • HT1459 We recently bought a new HP all in one Pavelion computer, and once it was set up we downloaded my itunes.  Now when I go to play a song from my library, an error message comes up saying: the song......could not be used because the file could not be

    Since I have a new computer , I had to download my itunes to the new computer.  Now I cannor listen to anything in my library.  I get the message;: the song...could not be used becaue the original file could not be found.  Would you like to locate it? Then gives me the option to loaacat it or cancel:  Why is this happening??

    you have to file the music file if you dont itunes cant play a file that does not exist. check the get info and look for the old music file on your old computer. Or do this http://support.apple.com/kb/ht4527.

  • My iTunes account sayscould not be used because the original file could not be found. Would you like to locate it? whenever i click on a song and i didn't move the songs anywhere. I don't know if i saved them to my hard drive so i can't find any songs

    I downloaded something that was told to me to get to put some of my itunes songs onto my android phone. I think it synced my account, though. Whenever i click on a song an exclamation point comes up and something pops up and says "could not be used because the original file could not be found. Would you like to locate it?" and i don't remember ever backing up my songs (this computer is fairly new) and now none of my songs come up. I have no idea what to do but ive spent hundreds of dollars on this account purchasing from the itunes store. Please help me!

    Tunes works through a database file which has a list of your tracks.  When you click on a track it looks up in the database which file it needs to play, then plays the file.  If something breaks this link then you get !  The two main ways to get ! are to move a file from where iTunes expects it to be, or to delete it altogether.  I don't know which has happened in your case.  You can try using Spotlight to find a file for the one referred to in a broken link.  If the files have been moved then they need to be moved back.  If they were deleted completely you will have to restore them from a backup or download them again from the iTunes Store and rebuild your library.

Maybe you are looking for