ITunes failing to run with an application error

Hi All,
I have been running iTunes on my DELL computer with absolutely no problems until just the other day I started up the program and got this unrecoverable error:
Remote Speakers: iTunes.exe - Application Error
The rest of the error message basicaly says that it can't read a particular referenced memory location. It stops there and I can only ok or cancel the error message.
I tried reinstalling the latest version of iTunes, didn't work. I then uninstalled iTunes and reinstalled it...nope didn't work either.
I'm feeling quite frustrated, anyone have some ideas of what I can do to resolve this?
Trying to be calm,
Thoram

yeah let's swap that QuickTime out.
since that's not the most common QuickTime error message i see under these circumstances, we'll take a few additional precautions with the uninstall.
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

Similar Messages

Quick Time (Audio Preferences) fails to launch with buffer overrun error

It all started a few weeks ago, after installing itunes7.0 for windows, and itunes began to annoy me (indeed drive me mad) with an error message :
"an unhandled win32 exception has occured in itunes.exe [3840]" at startup / closing immediately afterwards.
After numerous uninstall/reinstall/clean the registry/system restore attempts I managed to solve the issue-- BUT only for a few days..It failed again and so I went through the itunes support forums even found an entry
"iTunes 7 for Windows: iTunes fails to launch with an unknown error"
which suggests that my issue could be solved by :
"Open the QuickTime control panel and select the Audio tab.
In the Devices section de-select the Safe mode (waveOut only) option and click Apply."
But to my surprise, when i selected the Audio tab (and the Audio tab ONLY ) it presented me a "buffer overrun error" which indicated that the internal state of the program has been corrupt and it would be shutting down now..
It's such a nuisance..!!
Please, help, and your help will be deeply appreciated... !
I have tried to revert to the older version and it didn't work..

let's try swapping out your existing QuickTime one more time. we'll take a few additional explicit precautions this time.
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

Itunes 9 Upgrade. Installs OK, but fails to run with 'Unknown Error(-50)'

Been running Itunes versions 7/8 very happily. Upgraded to 9.0 today. After installing, which reported no problems, Itunes failed to run, reporting a missing reference in CoreFoundation.dll. I tried a re-install, but with no improvement. I the un-installed Itunes, re-imported the Itunes 9 setup file (88Mbytes), re-installed the product, and still it does not run, reporting a -50 Unknown Error.
Not exactly impressive! I'd be grateful for any ideas, including how to revert to version 8. Thanks, ju

Thanks for the pointer to the KB article. Error 1 is missing from the list provided by iTunes (more information), but I was afraid it means hardware. Will try on another computer, but I'm afraid the phone is sick.
Thanks,
Manfred

ITunes fails to install with error Ox800736FD. Any ideas?

iTunes fails to install with error Ox800736FD. Any ideas?
Trying to install on a Acer Aspire-- no CD/DVD

Ox800736FD
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736FD, or some other number? (If they're another number, what number are you getting?)

Failed to run task sequence. Error occurred while starting the task sequence (0x8007000E)

Hi there
Patch Tuesday yesterday (10th June2014). As always we deploy new patches first to a test collection where Windows 7 updates automatically apply.
Upon trying to rebuild any of the machines in this test collection, we were presented with the following error message:
Failed to run task sequence. Error occurred while starting the task sequence (0x8007000E)
After searching about this, I found this page from Niall Brady, which explained the problem:
http://www.niallbrady.com/2013/05/17/after-selecting-a-task-sequence-in-configuration-manager-2012-sp1-you-receive-threadtoresolveandexecutetasksequence-failed-code0x8007000e-in-smsts-log/
So I removed some of the machines from the test Windows update collection, and as per the advice in the above link, the error was gone and those machines could be built successfully.
So the problem is there were too many many policies downloaded (apps, packages and most of all updates) for the task sequence ram to store, hence the error.
Now...
...I have a question.
The next logical step to my mind is to patch our OS image with all missing patches, so these do not have to be downloaded at build time. Niall mentions this as one of the resolutions to this issue.
However there seems to be some confusion over whether this would actually make a difference.
I read through this link:
http://social.technet.microsoft.com/Forums/en-US/7e597b44-2586-4063-b6d0-cec48a7c11c7/sccm-2012-task-sequence-failure-0x8007000e?forum=configmanagerosd
There's seems to be no consensus on this.
Is SCCM 2012 clever enough to - when the task sequence is first started - to download ONLY the updates (policies) it detects as NOT present in the OS image...
or
Will it simply try to download policies for ALL items deployed to it, whether the updates are present in the OS image or not?
I will be disappointed if SCCM 2012 SP1 CU2 isn't clever enough to only download policies at build time for the apps, packages and updates it detects as needed.
I'd be grateful for some clarity on this.
Regards,
John, Glasgow.

Hi Jason
Thank you for replying, I appreciate it.
1) We currently have 15 or 16 software update groups for Office updates, dating back a month or two. The latest software update group contains all the patches in the previous software update groups plus the patches released on 10th June. Do you recommend
deleting all but the latest software update group?
2) I'm almost reluctant to ask this, but based on what you have advised, is it the case that when the task sequence executes, it will download policies for each update in each software update group regardless of whether it has already downloaded a policy
for an update in a previous software update group? So in effect it's downloading policies (for updates) it has already downloaded?
3) I'm not clear on why there would be no policy for an image; in Niall Brady's informative page on the 8007000E error, he writes the following:
"The reason it has run of space could be due to four possibilites: too many applications, too many Windows updates, too many Task Sequence steps, too many referenced packages'.
Can you shed some light on why there isn't a policy for an image?
Thanks again for replying,
John.

Session "" failed to start with the following error: 0xc0000022

Newly installed Windows 2012 R2 server throws the following event roughly every 3 minutes:
Session "" failed to start with the following error: 0xc0000022
The PID referenced in the event points to WmiPrvSE.exe running as NETWORK SERVICE. Is there something obvious I'm missing because I'm not sure where to go with the information I found so far. I already did my fair sharing of Binggling and everything
I find doesn't apply or doesn't fix the problem.

Hi,
Can you let me know the full event log content?
I suggest you restart the Windows Management Instrumentation service.
Niki Han
TechNet Community Support

Previously OK report now fails to run with REP-1226

I have been developing a report with a fairly complex layout over several days, saving several versions of the report along the way (after running and testing them). The latest version of the report now fails to run (both as an RDF in Reports Designer and as a REP via rwservlet/oc4j) - It fails with error REP-1226 "Body location is beyond print area". I loaded a previously tested version of the report into the Designer and tried to run it - This also fails with REP-1226, as did the previous 2 versions of the report, ALL OF WHICH HAD PREVIOUSLY RUN OK, BOTH IN REPORTS DESIGNER AND RWSERVLET/OC4J.
Rebooted the machine, loaded a version of the report that had previously been tested and RAN OK, this now fails to run with REP-1226.
The Reports Designer in use is version 9.0.2.0.3, running against database version 9.2.0.1.0 both running on Windows XP - I tried loading the report into a later version of the Designer (10.1.2.0.2) and the same error occurs.
Any ideas????

not sure if this will work,
but you can just try.
Try increasing the width of the page.
Paper Layout -> Main Section -> Body(Right Click) -> Select "Property Inspector" and set width to any desired range.
-ARR

Session "Circular Kernel Context Logger" failed to start with the following error: 0xC0000035

fresh install and configure on A Dell optiplex3010 running window 7 pro 64 bit running can anyone tell what this is ?
Log Name: Microsoft-Windows-Kernel-EventTracing/Admin Source: Microsoft-Windows-Kernel-EventTracing Date: 4/16/2014 12:04:17 PM Event ID: 2 Task Category: Session Level: Error Keywords: Session User: SYSTEM Computer: HMCServer Description: Session "Circular
Kernel Context Logger" failed to start with the following error: 0xC0000035 Event Xml: <event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"><system><provider guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}"
name="Microsoft-Windows-Kernel-EventTracing"><eventid>2</eventid> <version>0</version> <level>2</level> <task>2</task> <opcode>12</opcode> <keywords>0x8000000000000010</keywords>
<timecreated systemtime="2014-04-16T16:04:17.657816300Z"><eventrecordid>44</eventrecordid> <correlation><execution processid="4" threadid="60"><channel>Microsoft-Windows-Kernel-EventTracing/Admin</channel>
<computer>HMCServer</computer> <security userid="S-1-5-18"></security></execution></correlation></timecreated></provider></system> <eventdata><data name="SessionName">Circular
Kernel Context Logger</data> <data name="FileName"></data> <data name="ErrorCode">3221225525</data> <data name="LoggingMode">268436608</data> </eventdata> </event>

The error is implying there is a naming conflict. This could be 2 or more PCs with the same SID or Computer Name, or two different objects (shares/drives) attempting to use the same drive letter. There is one thing I found of renaming a file that has helped
some people:
http://social.technet.microsoft.com/Forums/windows/en-US/2eab69ac-7537-40c4-916e-6f6d41c05d4b/session-circular-kernel-context-logger-failed-to-start-with-the-following-error-0xc0000035?forum=w7itprogeneral

Session "UpdateUx" failed to start with the following error: 0xC0000022

Running WTP Build 10049 and get the following error, after every boot/reboot :
Error 21/04/15 11:09:39 Kernel-EventTracing 2 Session
Expanding this, by clicking on it, produces the following message :
Session "UpdateUx" failed to start with the following error: 0xC0000022
Any suggestions for a cure.

Hi athol49,
Which account you have used to logon this machine?
This error code is mostly related with the service permission, which indicates that the permission is not configured correctly.
Try to boot into safe mode and check this issue again, make sure there is no 3rd-party software involved.
Next thing is to create another admin account( or enable the built-in admin account to create a new admin account, as this one have permisssion issues), then check this issue again.
Further, run the DISm command to make sure there is no component issue:
DISM /Online
/Cleanup-Image
/RestoreHealth
/source:WIM:X:\sources\Install.wim:1
/LimitAccess
Where the X: is the drive for the install media, or the mounted ISO.
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Session "WbadminInBuiltTracing" failed to start with the following error: 0xC0000035

I'm getting the following error:
Log Name: Microsoft-Windows-Kernel-EventTracing/Admin
Source: Microsoft-Windows-Kernel-EventTracing
Date: 5/17/2010 11:04:48 AM
Event ID: 2
Task Category: Session
Level: Error
Keywords: Session
User: ****
Computer: ****
Description:
Session "WbadminInBuiltTracing" failed to start with the following error: 0xC0000035
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
<EventID>2</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>2</Task>
<Opcode>12</Opcode>
<Keywords>0x8000000000000010</Keywords>
<TimeCreated SystemTime="2010-05-17T18:04:48.898886000Z" />
<EventRecordID>45</EventRecordID>
<Correlation />
<Execution ProcessID="4816" ThreadID="2800" />
<Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
<Computer>****</Computer>
<Security UserID="****" />
</System>
<EventData>
<Data Name="SessionName">WbadminInBuiltTracing</Data>
<Data Name="FileName">
</Data>
<Data Name="ErrorCode">3221225525</Data>
<Data Name="LoggingMode">2</Data>
</EventData>
</Event>
Does anyone know what this is or how to prevent it from
occurring?
I'm running Windows Server 2008 R2.
Thanks much,
James

Not according to my computer - (actually its at least 4 years now) which among so many other errors have haunted me from the day I bought it and took it home. I've spent literally a year of time out of the 5 I've had this laptop which btw is a home computer,
not a small business pc - searching, trying fixes that didn't work, searching more trying fixes that worked only to have the same scenario begin again 2-3 months down the road OR new ones pop up - which starts the process all over again. I'm now getting BSOD's
about once every 2-3 days with no reason in the event viewer.
And I continue to work on all the errors, warnings and critical errors with no results. I just wish Microsoft would fix these issues instead of developing new OS's that not only carry these problems over but add new ones to each new OS. Don't misunderstand
me. I like Windows, in fact I'm one of the very few graphic artists out there that prefer it over a MAC but its quite disheartening to be continually working on these issues to say the least.
Of course, it's just my opinion....I could be wrong!

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

Object failed to run due to an error while processing on the Job Server

when i am scheduling a report ith email notification i am getting below error
error msg: Object failed to run due to an error while processing on the Job Server
i have configured email notification in bo cmc and server also SMTP enabled. while scheduling report to ueser i am getting error and even mails are delivered to users as well.

hi prithvi,
i am able to schedule reports to other destinations and reports are delivered as per the requirement.
i am able to telnet SMTP server from Adaptive job server machine on SMTP port.
have to check errors on log file....
@ COULD YOU PLEASE LET ME KNOW USER CAN SEND A MAIL TO USER IN SAME DOMAIN . WHILE SCHEDULING A REPORT AND AS OPTION AVAILABLE IN 4.0 LAUNCH PAD CAN HE SEND A MAIL DIRECTLY AFTER RUNNING REPORT.

When I try and open ITunes it flashes up with "an unknown error occurred (1

When I try and open ITunes it flashes up with "an unknown error occurred (13005). Why is this!

I have the same problem, removed the files you mentioned, still no luck

My itunes keeps shutting down with an windows error

My itunes keeps shutting down with a windows error everytime i try to convert someting to AAC.

Im having the same issue. It starts up shutsdown and pops up an error has occured message. I have uninstalled and reinstalled it 3 times and even downloaded the Quicktime and ITunes seperately. But the same message appears everytime. I did discover that it was the Quick time messing up though... so uh this might not help but maybe someone else know something about the Quicktime problem.

ITunes 6 actually running WITH norton?

It's weird. And I seriously don't know how this works. My iTunes 6 does run with Norton enabled. Any ideas?

hi Katie!
It mysteriously changed somehow, because the last time I checked my Norton firewall it had "block all" selected. When I tried to select "permit all" my Norton froze.
that's been reported before. (it's the basis of the occasional "overnighter" cures ... sometimes the silent blocking un-jams of it's own accord.)
did you have your personal firewall disabled prior to selecting those settings?
love, b

ITunes failing to run with an application error

Similar Messages

Maybe you are looking for