ITunes falls over on the third stage of running iMatch
iTunes falls over on the third stage of running iMatch. Comes up with iTunes has stopped working look for fixes - which if you do says there is a fix but actually seems to do nothing just reloads 10.5.2.11 -which is what I am running. Any ideas?
you can check a similar thread involving a scrolling
movieclip:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=15&catid=665&threadid =1324923&enterthread=y
Similar Messages
-
I recently had to get a new windows computer, old one crashed. My tech guy got all my itunes library over to the new one, and all my songs are there. However, some won't play and ask me for the password for the apple id they were purchased under. 2 of these ids are obsolete and I have no access to those accts. The songs all played on my old computer without prompting me for a password.
Any ideas how I can get around this hassle and get them all to play? We're talking about 800 songs that are being obstinate. The new computer is authorized under my "new" Apple id, which I have used for years.Downloading past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list, or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple notes it is your responsibility to back up your purchases.
Select the store on the left side of iTunes.
Click on Purchased on the right side under Quick Links.
You can re-download your available previous purchases. -
I am finally breaking down and getting a new laptop. My question is how do I move my Itunes library over to the new laptop?
Marion,
See this Apple support document.
http://support.apple.com/kb/HT4527
B-rock -
I have an HP Pavilion zd7000 laptop with Windows XP & SP2 update installed. Processor is Intel Pentium 4. My system is clean with no rubbish software running. I have several anti-malware & anti-spyware systems installed but they are dormant & not running during the attempted installation. SP3 almost completes installation but freezes at "Finishing" stage showing "Running processes after install". Anti-virus is of course switched off. The system then hangs fore-ever with hard disc activity showing intermittently but nothing else happening. Luckily, by holding down the laptop on/off switch I can always eventually restore to previous settings & recover full use but without SP3! This is annoying & frustrating. I have seen a lot of threads about this problem but no real answers. Can anyone help please?
What is Shmrate.exe is not running?
This can be read two different ways
One well if you look at it like this
User>shmgrate>Operating system>drivers>computer. Result is denied!
If you have something like this
User > User Account Control >Operating system>drivers>computer. Result is denied again!
Note that an adminstrator is only a adminstrator and Computer Adminstrator can install Sp(s). Which I believe is tyour question. Which is my guess.
Which is the reason some people reccommend installing from the "Adminstrator" account Which generally is not a User account. Yes some people add and modify there account access by using Subinacl.exe and reset.cmd, which bumps the account from adminstrator to Computer Adminstrator. An alternative is to boot into safe mode. Pressing the *F8* key before the windows welcome screen starts up. And selecting safe mode. Which is why more people report success with using the .ISO install.
To add to your confusion. Windows Sp2 usually has windows installer 3.0, or windows installer 3.1
Table us types of accounts. I wish windows 200 documentation had made it completely into Xps documentation. They had an excellent table with tthe types of accounts
Limited user. Not able to run more then basic programs. Not able to ;install device drivers, not able to install progras, not able to install Sp(s)s
Power user Able to run more advanced programs. IE Defragger.
adminstrator. Mess with the operating system, back up things, able to install programs, add users.When Windows Xp is installed this is the type of user associated with adminstrator. NOT CA
Computer adminstrator. Able to Install of all things Sp(s).
Hopefully this helps you out. Of course there is the release notes, Xp solution center and of course things to do before installing Sp3.
Keith -
I got a new pc and I want to transfer my itunes library to my new pc. Not all the songs are purchased from itunes. How do I get all the songs to transfer?
iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you let iTunes manage your music: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Start iTunes with the option (shift on Windows) key held down and guide it to the new location of the library. -
After updating to Itunes 10.4, i cannot now connect to teh store or sync any of my devices, everything was working fine bfore, i removed Itunbes and re-installed same probloem, can anyone help? i am running windows vista
try to reinstall again. They had a message last night that there was an error, the download wasn't available for awhile, I was able to download and reinstall this morning.
I had uninstalled all apple products and tried to install but the download had disapeared till this morning. Worked after reinstall. -
Itunes playback over airport choppy when anything else running
Hi,
I have my iTunes library stored on a Lacie Big Disk connected by USB to my Airport Extreme 802.11n. My speakers are wirelessly connected to an Airport Express used as an extender. The setup works fine if nothing else is running, but if I turn on bittorrent, for example, it chops up and becomes unusable. This happens even when monitoring the speed of bittorrent shows less than 100k combined up and down. Any suggestions for why my 300 Mbit/s gets clogged by 100k of traffic? Thanks a lot.Some additional information, perhaps: the Time Capsule icon remains on my MacBook's desktop after the hourly backup is made. When I manually eject it, the interruptions are fewer and only happen when either my MacBook or my iMac are backed up.
So perhaps question #2: why does the TC icon remain on my MacBook's desktop, while it doesn't on my iMac's? -
Previously Working Code Falling Over After slight modification
Hi All
I have an issue with a piece of code that was working previously. what I have is that initially I consolidated multiple projects plans into a master plan whilst retaining links and my extract to Excel worked fine. However I modified my code to
consolidate individual projects plans into an Excel worksheet but this time without retaining the link and it now fails. There are 1496 tasks in the consolidated plan and it falls over at the end of the first inserted Project. Here3 is the code:
'Export GIVE and GET Milestones
Row = 1
For Each t In ActiveProject.Tasks
If t.Flag10 = "True" Then 'Flag10 is Deliverable Yes/No
Set s = xlApp.ActiveWorkbook.Worksheets(1)
Set xlRng = s.Range("A3")
If Not t Is Nothing Then
With xlRng
.Range("A" & Row) = t.Text16
.Range("B" & Row) = t.Text12
.Range("C" & Row) = t.Text4
.Range("D" & Row) = t.Name
.Range("E" & Row) = t.PercentComplete
.Range("F" & Row) = t.Finish
End With
End If
If t.Flag10 = "True" Then
Row = Row + 1
End If
End If
Set xlRng = xlRng.Offset(1, 0) 'Point to next row
Next t
The line it falls over on is :
If t.Flag10 = "True" Then 'Flag10 is Deliverable
Yes/No
Any help/advice would be appreciated.
Kind regards
Tony
TKHussarHi John
The previous version of my code retained the link to each individual Project plan. On your suggestion I removed the link to the sub project plans. So when I recorded the macro to consolidate all of the individual plans I removed the tick to retain
a link to the original plans. In the consolidated plan there are 1496 tasks returned by the ApplicationsProject.Tasks.Count property. Here is the full version of the code to hopefully help:
Sub ExportGIVEs_GETs()
Dim xlApp As Excel.Application
Dim objRange
Dim xlRng As Excel.Range
Dim Res As Resource
Dim t As Task
Dim s As Worksheet
Dim Row As Integer
Dim LastRow As Integer
'Start Excel and create a new Workbook
Set xlApp = CreateObject("Excel.Application")
xlApp.Visible = True
xlApp.Workbooks.Add
'Create Column Titles
Set xlRng = xlApp.Range("A1")
xlRng.Range("A1") = "EA Release 2 - GIVEs and GETs"
Set xlRng = xlApp.Range("A1")
xlRng.Range("A1").Select
With xlApp.Selection.Font
.Name = "Calibri"
.Size = 22
.Underline = xlUnderlineStyleSingle
.ThemeColor = xlThemeColorLight2
.ThemeFont = xlThemeFontMinor
End With
Set xlRng = xlApp.Range("A1:F1")
xlRng.Range("A1:F1").Select
With xlApp.Selection.Interior
.Pattern = xlSolid
.PatternColorIndex = xlAutomatic
.ThemeColor = xlThemeColorAccent2
.TintAndShade = 0.799981682294784
.PatternTintAndShade = 0
End With
Set xlRng = xlApp.Range("E1")
xlRng.Range("A1") = "Issued: "
Set xlRng = xlApp.Range("F1")
xlRng.Range("A1") = "=" & "Today()"
Set xlRng = xlApp.Range("A2")
xlRng.Range("A1").Select
xlRng.Range("A1") = "Workstream"
xlRng.Range("B1") = "UID from Plan"
xlRng.Range("C1") = "Provider/Receiver"
xlRng.Range("D1") = "GIVE/GET Name"
xlRng.Range("E1") = "% Complete"
xlRng.Range("F1") = "Date Required"
Set xlRng = xlApp.Range("A2:F2")
xlRng.Range("A1:G1").Select
With xlApp.Selection.Font
.Name = "Calibri"
.FontStyle = "Regular"
.Size = 11
.ThemeColor = xlThemeColorDark1
.TintAndShade = 0
.ThemeFont = xlThemeFontMinor
End With
Set xlRng = xlApp.Range("A2")
xlRng.Range("A1:F1").Select
With xlApp.Selection.Font
.Name = "Calibri"
.FontStyle = "Regular"
.Size = 11
.ThemeColor = xlThemeColorDark1
.TintAndShade = 0
.ThemeFont = xlThemeFontMinor
End With
With xlApp.Selection.Interior
.Pattern = xlSolid
.PatternColorIndex = xlAutomatic
.Color = 6299648
.TintAndShade = 0
.PatternTintAndShade = 0
End With
Set xlRng = xlApp.Range("A2:F2")
xlRng.Range("A1:F1").Select
With xlApp.Selection
.RowHeight = 40
.VerticalAlignment = xlCenter
End With
xlRng.Range("A1").Select
'Export GIVE and GET Milestones
Row = 1
For Each t In ActiveProject.Tasks
If t.Flag10 = "True" Then 'Flag10 is Deliverable Yes/No
Set s = xlApp.ActiveWorkbook.Worksheets(1)
Set xlRng = s.Range("A3")
If Not t Is Nothing Then
With xlRng
.Range("A" & Row) = t.Text16
.Range("B" & Row) = t.Text12
.Range("C" & Row) = t.Text4
.Range("D" & Row) = t.Name
.Range("E" & Row) = t.PercentComplete
.Range("F" & Row) = t.Finish
End With
End If
If t.Flag10 = "True" Then
Row = Row + 1
End If
End If
Set xlRng = xlRng.Offset(1, 0) 'Point to next row
Next t
'Tidy up
Set xlRng = s.Range("A2")
xlRng.Range("A1").Select
With xlApp.Selection
.HorizontalAlignment = xlCenter
.VerticalAlignment = xlCenter
.WrapText = True
End With
Set xlRng = s.Range("D:E")
xlRng.Range("A:B").Select
With Selection
xlRng.Range("A:B").HorizontalAlignment = xlLeft
xlRng.Range("A:F").EntireColumn.AutoFit
End With
Set xlRng = s.Range("B:G")
With xlRng
xlRng.Range("A:F").EntireColumn.AutoFit
End With
Set xlRng = s.Range("A:A")
xlRng.Range("A:A").ColumnWidth = 25
Set xlRng = s.Range("E2")
xlRng.Range("A1").Select
With xlApp.Selection
.HorizontalAlignment = xlCenter
.VerticalAlignment = xlCenter
.WrapText = True
End With
Set xlRng = s.Range("G2")
xlRng.Range("A1").Select
With xlApp.Selection
.HorizontalAlignment = xlGeneral
.VerticalAlignment = xlCenter
.WrapText = True
End With
Set xlRng = s.Range("F:F")
xlRng.Range("A:A").Select
With Selection
xlRng.Range("A:A").NumberFormat = "dd/mm/yy;@"
xlRng.Range("A:A").HorizontalAlignment = xlCenter
End With
'Sort by Workstream Area
Set objRange = xlApp.ActiveWorkbook.Worksheets("Sheet1").Range("A3:F2000")
objRange.Sort Key1:=objRange.Parent.Range("A3"), Key2:=objRange.Parent.Range("D3")
Set xlRng = s.Range("A1")
xlRng.Range("A1").Select
Set xlRng = s.Range("A1:F2000")
With xlApp.ActiveSheet.PageSetup
.Orientation = xlLandscape
.PrintGridlines = True
.PaperSize = xlPaperA3
End With
Set xlApp = Nothing
End Sub
Thanks for your help.
Tony -
I downloaded the new version of itunes and it changed my path. I have over 10,000 songs in 100's of play list. This is the third time it has happened. It is putting file://localhost in front front of the path. Does anyone know why and has a solution RJ
Hello there, RJ Quick.
I've located the following Knowledge Base article that might be the information you're looking for:
iTunes 11 for Mac: Change where your iTunes files are stored
http://support.apple.com/kb/PH12165
The following section may be of help:
Change where imported files are stored
Choose iTunes > Preferences and click Advanced.
Click Change and select a new location for your files.From now on, new songs and other items you import will be stored in the new location. Songs you’ve already imported stay in their current location.To go back to storing imported files in the iTunes folder, choose iTunes > Preferences, click Advanced, and click Reset.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
my itunes match keeps starting by itself.. gets to the third and final step (artwork) then starts all over again. it does this all by itself. itunes even opens by itself to do this. help!
how long have you had your ipod? mine did the same but after a while you need to get a new one because of the battery...
-
I just purchased Match and it is not working properly. It repeatedly crashes at the third step, closed the program, and doesn't recognize my computer when I restart. I have to authorize and sign in all over again each time. Has anyone found a resolution to this problem? Thanks.
Hi guys - yep that is eactly the problem - I have Macbook pro and Apple TV, they are connected okay, all of my other details are okay but I cannot synch with iTunes match and I am having problems synching up my music acrosss my devices.
I also get the same messages;
"We could not complete your iTunes Store request.
The network connection was lost.
There was an error in the iTunes store. Please try again later." -
How can i use my apple ID with the itune store over my windows laptop
how can i use my apple ID with the itune store over my windows laptop
If you don't have iTunes installed on your laptop then you can download and install it from here : http://www.apple.com/itunes/download/
You can then log into your account on it via the Store > Sign In menu option (on iTunes 11 on a PC you can get the menus to show via control-B) :
And you can then select the Store on the left-hand sidebar (you can enable the sidebar via control-S), and then browse items in the store and buy them by clickin on their price. -
I have an iphone and it is obviously registered to my itunes so i have all my apps and music on it and my sister just got the new ipod touch and wants my apps and music and so i went to register it to my itunes to sync my music and apps to it just before her birthday but itunes crashed on one of the stages (the final stage i think) of registartion and so i had to close itunes and start it up again but it didnt give me the steps to register the ipod again and now when i connect it i go onto the ipod button and it is just blank with ipod written in the middle with no autofill buttons or sync buttons or any automatic fills and i cant drag music onto it either. Is there anything i can do?
- You need to restore the iPod to factory defaults/new iPod and start anew. Is the restore button visable in iTunes? If it is they restore the iPod.
- If it is not visible try resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- If the restore button is still not visable, try placing the iPod in recovry mode. See:
iPhone and iPod touch: Unable to update or restore -
Hi Guys,
My computer crashed and I lost everything. I got a new one and downloaded itunes all over again. When I plug my ipad in even after authorising my computer it will still not let me edit anything on the ipad. The screen is grey like on the ipad section and i cant select an app or anything. I have transfered purchase apps but all it does is take movies and tv shows accross. It wont transfer the apps into itunes. Please helpAs far as I know, iTunes will still not change anything until you click on Apply in the lower right corner. I fiddle with my settings all the time - just so I can get a sense if what to expect should I make any changes - and I have never seen anything happen to my configuration unless I click on Apply in the lower right corner of iTunes. Not only that - you have turned off auto sync so as far as I know you still have to click on sync or apply in order for the iPad to sync with iTunes.
That doesn't mean it will not happen, I've never seen it happen - is all that I'm saying. I'm sorry but I'm not sure what will happen, but the only reason that I can of why the apps will not transfer is because of the manual manage setting. I could be wrong about that as well.
Look at this discussion - which I have referred quite a few users to read. I know this process has worked for a number of people that have read it and used the instructions in it. Maybe we are missing something - what that would be - I'm not quite sure, but take a look.
https://discussions.apple.com/thread/3305461 -
i was doing the software update to my iphone 4s and my phone died. i pluged it in and when it turned on after the white apple the screen showes the blue itunes logo over the word itunes over an image of a charger. i tried reseting my phone. i cant figure out how to get past this point
See Here > http://support.apple.com/kb/HT1808
Maybe you are looking for
-
What do I need to do to pass on my old iPad to another person?
i have an old iPad I'd like to give or sell to someone else, but it sounds like ios 7 makes doing this complicated. So does apple have a list of steps that I must do so that I can pass on my iPad ( or iphone) to someone else? can someone give me th
-
AMD FirePro 2270 stuck at low resolution
Hey all, my new box came with a AMD FirePro 2270 and a BENQ 27" (BL2710)monitor. When starting up X (gnome as WM), resolution is stuck at 1680x1050 instead of the desired 2560x1440. Both card and monitor should be able to handle this resolution. I am
-
i want to block the delivery aftercycle closing in VL01N for shipping point 1103 selection date not more that 3 days after closing. For Order Type Is 2873 1901 2902 A popup Message Will Apper If Delivery Is After Day's . So How Can I Solve This Issu
-
Trying to fix exposure of a stack
I have just recently retruned from Costa Rica with a number of great pictures. Some how the exposure setting on my camera changed and a number of these photos have a blue cast to them. I thought that it was possible to select a number of photos in Ap
-
Hi All, We are having couple of issues with the explosion program in COPA/PCA...if someone can give me more details on how these explosions gets created or i know there are programs which pulls information for this packages and we can modify it...aft