Itunes folder moved after install windows 8.1

tonight make big mistake - install windows 8.1
when i open itunes its was empty ( about 5k songs) my original itunes folder exsist in D:\My Music but itunes open
folder in default place C:\Users\Evgeny\Videos\My Music.
trying change in prefernce but its only for new song adds and nothing happen.
Dont know what to do, move itunes folder to C:\Users\Evgeny\Videos\My Music from D ( not sure can see original direction to my music) or uninstall and install, but dont know how i can say where my itunes folder exsist.
thank for help

what? downgrade?!!!
is this HP support?!!!
are you kidding me?
downgrade!!!
best of luck!!!
my friend's old dell laptop has 8.1 O.S. and it's working with good performance. without problems like this.
and now, you want to downgrade While I've bought windows 8.1

Similar Messages

  • After installing windows xp accidentlly i erased macintosh hard disc. Now my macbook shows blank white screen with sign of folder with '?' blinking. Now what to do please help

    After installing windows xp accidentlly i erased macintosh hard disc. Now my macbook shows blank white screen with sign of folder with '?' blinking. Now what to do please help

    Avoid using hand-tools or power equipment .
    "My mac book did not come with dvd. Now what should i do?"
    Bring it to the Apple store. They can help.

  • After installing Windows 8, when I try to use itunes, the cursor only slowly scrolls to the top of the page and the program will not respond.

    After installing Windows 8, when I try to use itunes, the cursor only slowly scrolls to the top of the page and the program will not respond.

    After installing Windows 8, when I try to use itunes, the cursor only slowly scrolls to the top of the page and the program will not respond.

  • All music links are lost after installing windows 7!!! HELP!!!

    All music links are lost after installing windows 7!!! HELP!!!
    I upgraded my system to windows 7 ultimate from Vista and installed itunes 64px. but when I copy the old itunes folder into D://music and opened itunes, all my music cannot be played. each link shows the mp3 location as: file://localhost/D://music/itunes... ... I ve tried deleting library file and copy/past the original one again. doesn't work. what should I do now. It's 106 GB songs. I cannot locate them one by one nor lose all my ratings and play counts.
    please help me!!!!!!!! >_<

    Was that Win 7 update from Lenovo, or Microsoft?  If Lenovo, it should have installed those missing features. If it was from Microsoft, you have to manually install the Lenovo drivers and software.
    The easiest way to do that is to first install ThinkVantage System Update and run it.  It should download and install the other drivers and apps.  I'm running Win 7 pro 64 on my T400 - a MS upgrade clean install, then TVSU installed the Lenovo stuff.  Everything works.
    Use the "SUPPORT" button at the top of this page, then "Download drivers and software" enter T400, install TVSU and you should be off to the races.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • A lot of problems after installing Windows XP using Boot Camp on a Mac Book

    I have been having a lot of problems after installing Windows XP Home Edition (2002).
    For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: +"This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?"+ When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
    How do I fix this problem?
    Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
    A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
    D: There are way too many problems, and I have a feeling there will be a lot more later on. Help....
    ~Twilight

    ---I'm moving this topic to the Boot Camp forums.
    -Twilight

  • After instaling windows 7 with bootcamp windows fails to connect to internet

    after installing windows 7 using bootcamp on mac osx lion windows wont connect to internet it appears to have no drivers installed for ethernet device

    create a Windows support software (drivers) CD or USB storage media
    http://support.apple.com/kb/HT4407
    Advanced Network: Proxy Settings, I uncheck "Auto Proxy detection" and make sure you have the interface you use selected and none others.
    "Go into System Preferences - Network - Advanced - Proxies  Uncheck "Auto Proxy Discovery", click OK, Apply"
    After Unchecking "Auto Proxy Discovery" I also had to Uncheck "Use Passive FTP Mode (PASV)" and then Restart Boot Camp Assistant.
    odiggy's comment and tried restarting Boot Camp Assistant. That did the trick, even though the Auto Proxy Discovery checkbox ended up the same as it started.  Windows support software is now downloading...  if you're downloading to an external drive make sure there's a least 1 GB of free space because the WindowsSupport folder is around 700 MB (format as FAT and MBR).
    https://discussions.apple.com/thread/3223773?start=15
    Also, Change Domain Name Servers to OpenDNS IP address servers - that should be at the router firewall rather than the OS but may be in both for some people. You may be using the defaults your ISP uses, save those if you want, and try these:
    208.67.222.222
    208.67.220.220
    Make sure you are not using LittleSnitch or Symantec (probably other 3rd party firewall)

  • After installing Windows 7 i am unable to play songs.

    After installing 32 bit Windows 7 everytime i play a song it becomes stuck on 0:00, i have gone through all the discussions on the website and have yet to find a solution, i really want to avoid reinstalling itunes.

    To anyone who has the same problem, i ended up solving it by updating my sound devices.
    After installing Windows 7 the whole computer would not produce any sound. I own a HP laptop so i just went on the HP website and updated the sound devices on my computer which for some off reason furthermore made iTunes play songs again. I dont fully understand the reasons behind this, but it works.  
    I hope this helps.

  • No sound from right speaker on Pavilion g6-1353ea after installing Windows 8

    I've had no sound from right speaker on my HP Pavilion g6-1353ea after installing Windows 8. I've checked all drivers, and have done the sound test in sound properties (left speaker beeps fine, but then nothing from the right). Anyone else having this problem/found a solution?!

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp59001-59500/sp59154.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio in both speakers.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I can no longer boot up in osx after installing windows 7 with bootcamp

    After installing windows 7 with boot camp I am no longer able to access my osx side, I do not receive an option when holding alt when turning on my MacBook

    What options do you get? If you don't get any options then you may not be pressing and holding the option key long enough or you are pressing it too early or too late.

  • No Bluetooth after install Windows 8.1 - Model: pavilion dv6 6080se

    Hi
    please help me
    there is no blutooth driver & software after install windows 8.1 pro 64bit
    i used all of past ver. drivers, but it says, your bluetooth device not connected
    i installed hp support asistant, i used windows update and check optional updates, a......n......d, no action
    please show me a way to use my bluetooth

    what? downgrade?!!!
    is this HP support?!!!
    are you kidding me?
    downgrade!!!
    best of luck!!!
    my friend's old dell laptop has 8.1 O.S. and it's working with good performance. without problems like this.
    and now, you want to downgrade While I've bought windows 8.1

  • Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.)

    Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.). I made a clean installation because I needed to go from 32 bit to 64 bit.
    Or should I just update bootcamp in Lion? (cause when I search for "boot camp" in Windows 7 there's no result)

    Installation Guide
    Instructions for all features and settings.
    Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ Answers to commonly asked Windows 7 questions.
    Apple Boot Camp Support
    Lion's Boot Camp Assistant 4.x should have downloaded Apple drivers as part of also partitioning.
    You need Apple drivers. And you then need to add on your own audio driver.
    You can run Assistant at any time to download and save a set of drivers.

  • How can I partition internal HDD after installing Windows 7 Professional via Boot Camp 4.0?

    I recently purchased MacBook Pro 13" (Late 2011) model with OS X v10.7.2 Lion installed. I've upgraded to OS X v10.7.3 Lion and updated all other software.
    I require Windows 7 for some Windows based softwares that do not support Mac OS X. Therefore, used Boot Camp 4.0 to install Windows 7 and then tried partitioning single internal HDD  to have 3 partitions (4 total including BOOTCAMP partition). Disk Utility created a 648.5MB partition and then I was able to create 3 other partitions of custom sizes. After applying these changes, I got an error message that said selected volume size is too small. I resized this 648.5MB partion to a custom size and had total 4 partitions, including BOOTCAMP.
    After reapplying these changes, BOOTCAMP partition was removed and I was left with only 3 partitions and empty space.
    I've tried several different ways to partition the disk, all in vein. Is there a way I can partition my single internal HDD after installing Windows 7 Professional via Boot Camp 4.0?

    You can't do what you want with GUI utilities, which will only allow a total of 4 partitions due to the limitation of MBR needed to support Windows. Those four partitions: EFI System (hidden), Mac OS, Recovery HD (hidden), Windows. So with Lion, you only get two visible partitions if you're going to use Windows with BootCamp. You can't make anymore with the included graphical tools.
    If you need more partitions you'll need to use something like GPT fdisk (gdisk) to create the partitions in the GPT first. Then add the Windows partition only to the MBR and flag it as bootable. gdisk can be googled and downloaded for Mac OS X off sourceforge. It is not a GUI tool.
    You should read this:
    http://www.rodsbooks.com/gdisk/
    And this:
    http://www.rodsbooks.com/gdisk/hybrid.html

  • No bootable drive after installing windows successfully

    I am trying to install Windows XP/Vista 32 Bit On Intel Mac Notebook through BootCamp.But after installing windows successfully,when it reboot?resatrt,It gives me error message that NO bootable Drive ,Press any to key to continue.......
    I have Downloaded Windows XP/Vista 32 Bit ISO format and burned it on my DVD through Disk utility.I can install windows successfully but when it restarted then it gives that message.However I am able to locate windows hard drive after holding the Option Key and when I choose the windows HDD (BootCamp),It gives me same error.
    I started the installation in osx using boot camp, and the windows was completely installed, even the boot camp driver for windows was installed and there are options to restart into either windows or mac osx.
    But when I restart the machine and choose to go into windows, it just can not boot, saying no bootable device. If I insert the installation disc into the drive, then I restart and go to windows, it can boot successfully.
    Please Help.
    Much appriciated.

    While we all have MacBooks in this forum not all of us use BootCamp. There's a BootCamp Support Community where everybody uses BootCamp. You should also post this question there to increase your chances of getting an answer.
    https://discussions.apple.com/community/windows_software/boot_camp

  • How Can you reinstall Photoshop Elements12 to a computer that its was there but loss it after installing windows 8.1

    How Can you reinstall Photoshop Elements12 to a computer that its was there but loss it after installing windows 8.1

    Reinstalling Mavericks depends on several factors:
    if you erased your recovery partition
    what OS originally came on your Mac.
    I'll assume you don't have a backup available that you made before your mishap,  because you didn't mention it.
    That's really the take home message here: have a backup!
    If you still have your recovery partition:
    boot into the recovery partition (command R at restart)
    use the recovery partition to reinstall Mavericks. see: OS X: About OS X Recovery
    if you do not still have your recovery partition, then it depends on whether your Mac originally came with installer disks or not.
    If it originally came with installer disks, you would boot from the installer disks, erase your HD, and then reinstall the OS that is on the installer disks, and then upgrade as necessary until you get to Mavericks.
    If your mac did not originally come with installer disks, but you managed to erase your recovery partition, then you can try to boot into internet recovery (option-command-R at restart), and use internet recovery to erase your HD and reinstall the OS that originally came with your computer, and then upgrade to Mavericks if you need to. See: Hands on with Mountain Lion's OS X Recovery and Internet Recovery | Macworld
             (the reference refers to ML but it applies just as well to Mavericks).

  • Is there a new driver needed to run Photoshop CC after installing Windows 8.1?

    Has anyone had trouble with downloading pictures to Bridge after installing Windows 8.1?

    You may have to reset preferences.  Hold down Ctrl key and start Bridge.  You should get a reset window.

Maybe you are looking for