ITunes for Windows 7 shows error messsage "this ipad cannot be connected. install 64 bit version" even though itunes was unistalled and latest version installed several times. what's next?

this ipad worked with iTunes on this PC before but I ve installed new software (don't remember what) and changed password to Apple and iCloud
this ipad works fine with another PC. New iPads can connect to this PC but not the old one. What do i do? buy new PC?
i did this iPad syncing with iTunes already - no result
ios 7 ipad 3 Cellular 32

Make sure you backup prior to following the steps below:
I'd recommend uninstalling iTunes on your PC, restarting if recommended, then going to the Start button and typing Regedit and searching for anything which mentions iTunes and deleting any mention of it from your Registry as it sounds like something from a previous version of iTunes is still hanging around in your Registry, however be very careful not to delete anything else as this could result in serious issues for you computer.
Once done and all entries for iTunes are deleted from the Registry, check C:\program files or where iTunes was installed and delete the iTunes folder if still present.
Then go here: http://www.apple.com/itunes/ and download iTunes.
Good luck,
Steve

Similar Messages

Hacker violating my privacy even though I have security and have changed passwords several times. Who ever it is, they want me to know because they have the nerve to take control over this computer even when I am logged in. The cursor just starts moving.

Someone is stealing my private information and logging onto my computer at the same time that I am logged into it. The cursor moves by itself and they log me out of whatever page I am working on. I have security and have reported it to my internet provider.
I have spent so much money trying to keep them out of my system to no avail. I also attend school on line and this is a huge problem for me. This thief changes my internet picture right in front of me.
I have tried to report this to the police, but they are no help at all and this is not right. They need to at least try and see who it is.
What do you suggest, I really want to know who is doing this.
Thanks,
[email protected]

Hi!
This could be done in many ways so it's quite hard to pin point what's going on and how it's done.
The first thing I would do is to reset the the router you have, creating a new password for loging on in case they have gained access this way, then create a new password for the wireless network if you are using it.
Then reinstall your computer, if they/you have installed some software and gotten a Trojan, the only way to get rid of it to 100% is to reinstall. There is no meaning in trying to find it and uninstalling it since it's gotten this far allready.
Depending on what router you have, you might be able to get the logs and see from where they are connecting and trying to pinpoint their location.
There are probably other ways to find out more, but if this happened to me, the first thing I would do is to get rid of the problem, ignoring who they are.
Best regars
Andreas Molin
Andreas Molin | Site: www.guidestomicrosoft.com | Twitter: andreas_molin

Can't update iOS 8 on my iPhone5 through iTunes on Windows 8 (error 3004, 3194). Updated host file, opened port 80, 443; turned off security system and firewall, etc. But nothing works. How to solve this problem?

Can't update iOS 8 on my iPhone5 through iTunes on Windows 8 (error 3004, 3194). Updated host file, opened port 80, 443; turned off security system and firewall, etc. But nothing works. How to solve this problem?

Hi the_mad_movies,
It seems like this article will be the best option for addressing this issue:
Error 3194, Error 17, or "This device isn't eligible for the requested build"
http://support.apple.com/kb/ts4451
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

I can't install itunes for windows get error message 5

i can't install itunes for windows get error message 5

I've been having the same issues for the past year and a half. I've spent 6-8months trying to figure it out. Went to various Itunes stores with pictures on my Iphone per each step so I could relay all information that I'd come across and the personnel were less than helpful, after conversations that would sometimes last an hour between myself, employees and managers they always came back to "simply uninstall then reinstall" when I told them for the thousanth time that I've done that multiple times and my errors are happening while trying to reinstall it they act stumped and say "well then I'm not sure, I'll give you a call if I figure it out" and disappear. I've been very disatisfied at the lack of support from Apple and if Android to piece together a reletively reliable phone I'd switch to them in a heartbeat. I'll follow this question incase someone can answer this, but I don't have much faith.
BTW, wifey has Windows 7 running on the laptop and my phone syncs just fine to that and no trouble with itunes, just mine (desktop).

I cannot not add iTunes to my iPad, I receive the following error message: This iPad cannot be used because the Apple Mobile Device service is not started.

I cannot not add iTunes to my iPad, I receive the following error message: "This iPad cannot be used because the Apple Mobile Device service is not started".

http://lmgtfy.com/?q=%22Apple+Mobile+Device+service+is+not+started%22

HT1349 I am unable to install iTunes. I'm receiving an error message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." I've unistalled and attempted to reinstall several times.

I am unable to install iTunes. I'm receiving an error message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." I've unistalled and attempted to reinstall several times. I keep getting the error message to reinstall to fix the problem.

See if this post from turingtest2 fixes it : https://discussions.apple.com/message/24620553#24620553

When trying to update my Iphone ios version I got an error message saying I`m not connected to the internet even though I`m connected

Hi
when trying to update my Iphone ios version I got an error message saying I`m not connected to the internet even though I`m connected
thanks

Hi there ramerr,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
-Griff W.

My airport utility says it cannot find any airport wireless devices, even though I am accessing the net via my wifi. What's up with this?

My airport utility says it cannot find any airport wireless devices, even though I am accessing the net via my wifi. What's up with this? Also, I cannot connect to my Photosmart b209a printer, though a different computer - same Macbook Pro can. I tried redownloading the software, but in the setup I get a "device not reachable" message: "However to continue configuring the device in network, your Mac must have access to the device. So please make sure that your Mac has access to the Network ..." I've checked my network on the system preferences and it's properly connected. I'm on the net as I do this. Tis very frustrating, and any assistance woud be appreciated.

Airport Utility is for administration of genuine Apple Base Stations. If you have a different Brand, Airport Utility can do nothing for you.
I think they're using ethernet.
To connect a Printer via Ethernet, no password is needed.
We already tried the password for the internet and that did not work...
If a password is required to connect to the Internet, then WiFi is likley being used, and that WiFi password is the one needed for the Printer connect wirelessly as well.
What make&model Printer? Is it indeed a Wireless Printer? Most connect via USB, but that would force it to use a specific computer to assist in printing.

Itunes for windows runtime error

On the last update for itunes an error happend. Now I have an runtime error. I deinstall itunes but now every time i boot my PC and windows startet I got an runtim error. In the Task Manager I see it is applephotostream.exe. I see that the apple folder is not completly empty. Sure I will have itunes on my PC again. What can I do.
Thanks

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8, some users may need to follow the process recommended here which includes some additional manual file and folder deletions not mentioned above.
In this instance you may also need to remove and then reinstall the iCloud Conrol Panel.
tt2

Window 8.1 Chinese character cannot display properly in a game even though I have downloaded and install all chinese language packs

Hi,
The operation system for my computer is Window 8.1. I am currently trying to install a chinese game. Even though I have downloaded and install all the chinese language pack, I have even set the regional language locale to chinese (similified / traditional),
the chinese characters will not display properly in the game. Some people told me i need to set the locale to Chinese PRC, but I am not sure where to download this PRC language pack for window 8.1 (as I only have chinese simplified and chinese traditional).
I would greatly appreciate if someone can give me a hand in solving this problem. Thank you for your help in advance.

Hi,
The operation system for my computer is Window 8.1. I am currently trying to install a chinese game. Even though I have downloaded and install all the chinese language pack, I have even set the regional language locale to chinese (similified / traditional),
the chinese characters will not display properly in the game. Some people told me i need to set the locale to Chinese PRC, but I am not sure where to download this PRC language pack for window 8.1 (as I only have chinese simplified and chinese traditional).
I would greatly appreciate if someone can give me a hand in solving this problem. Thank you for your help in advance.
Hi,
Please open Region, under administrative -> Language for non-Unicode programs: choose Chinese.
Kate Li
TechNet Community Support

I can't sync my ipad and i keep getting this error message .this ipad cannot be used because the apple mobile device service is not started

my iPad 2 won't sync, when iTunes opens I get this error message...This iPad can not be used because the apple mobile device has not been started, please help

http://support.apple.com/kb/TS1567

My ipad 3 won't update to iOS 6.2. I get error message saying I'm not connected to the Internet even though Internet is working for everything else.

Does anyone know why this is happening or what I can do?

If the update is not working from the iPad over wireless have you tried to update the ipad via iTunes. Here are the steps for both ways of updating your iPad http://support.apple.com/kb/HT4623

Burning error even though i've upgraded to latest version of iTunes???

Help, every time I attempt to burn a CD from a playlist it burns two songs then takes a while and bombs out of the burn....
I've run a diagnostic but it mean nothing to me.... can anyone help please, this is driving me banana's!!!!
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Computer Corporation Dimension 8300
iTunes 7.0.2.16
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.1
LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), sscdbhk5 (1.0.0.1),
UpperFilters: GEARAspiWDM (2.0.6.1),
Video Driver: NVIDIA GeForce FX 5200 \GeForce FX 5200
Found aspi32 running.
IDE\DiskMaxtor6Y120P0_________________________YAR41BW0, Bus Type ATA, Bus Address [0,0]
IDE\CdRomTEACDVD+RW_DV-W58E_____________________D.0C___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
D: TEAC DVD+RW DV-W58E, Rev D.0C
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 16 20 24 32.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
Thanks in advance for your help.
Paul

D: TEAC DVD+RW DV-W58E, Rev D.0C
hmmmm. let's first check to see if you've got Dell's latest firmware for that TEAC.
here's the Dell downloads page for your Dimension 8300 (the same firmware downloads appear to be compatible with the 8300Ns). Dell keeps firmware updates in the "Removable Media Storage Devices" sections on these pages.
Dimension 8300 / Microsoft Windows XP
to determine if the firmware listed there for the TEAC DV-W58E is more recent than the stuff on your PC at the moment, click on the "Drivers and downloads help" link to the right of the downloads page. click the "I'm Not Sure What Downloads I Need" link. if you're still having some difficulty, try clicking the "Choosing a device" section.

Ipad opening old versions even though deleted - can't view new versions!

I am designing and creating iBooks and need to show them to my editor to before they are finished - I export them, upload to drop box and she downloads them onto her iPad 3 Version 6.0.
When I make the necessary changes, i duplicate the file, rename it, and re upload to dropbox. ie 'Joe Blogs 2', that way I have many versions to refer back to if necessary, and i label each one on the cover to save confusion.
Since the new update for iBooks Author we have had some pretty big problems, I have edited, exported and uploaded the books as usual, my Editor has downloaded them onto her ipad, but every time we tap on the new title to open the book 'Joe Blogs 2' it opens an old version 'Joe Blogs 1', even if the old one is deleted from the ipad, also, even if we upload a completely different book it still opens 'Joe Blogs 1' I have changed the titles, and file names and it has made no difference. we are both using iBook latest update.
NOTE: All books were created from an original template created in iBooks Author version 1, from the 'Basic' template. I have been using this template because I don't know how to recreate it - the are no chapters it starts with 1 page then has sections so that it ends up with a table of contents which looks like this, which means that the 'chapter' (section) title can be tapped and go straight to the section, which is something I would lose if I started the books from scratch (which I obviously don't want to do)

Thank you for replying, and for the tips on templates, that makes a lot of sense - i have now created a template from the original book, and saved it as a template (I cannot make the template from scratch as I do not know how, as I explained, to make a contens page that functions like the one in the picture)
Unfortunately, this has not solved the other problem
Just to check we are on the same page (no pun intended) what I have been doing is this;
• To start a new book: opening 'contents page', a template i have created (and saved as a template, so I get it from the welcome screen on IBA 2, as opposed to opening an existing file and duplicating it.) use that template to create a new IBA file, ie 'Maslen and Mehra 1' which I save, export as 'version 1' when prompted on IBA v2. then I add this to drop box.
after my editor has downloaded and seen it, I make changes, then duplicate and save as ''Maslen and Mehra 2' to show to her again. then I make make changes, duplicate, save, make changes, duplicate, save... up until 'Maslen and Mehra Final Proof (9)'
since the new IBA update every time she tries to open a new file, the last one I sent her before the update opens (which is really old now as we have made a lot of changes, on our current book we are on version11 but version 3 opens!. Thinking that my template might be the problem I did the following:
• started from scratch: chose an bulit-in IBA template, put a 'A' on the cover, saved it as 'A', exported it, added it to drop box. my editor downloaded and opened it fine.
• changed the 'A' to a 'B' on the front cover (did not duplicate the file) exported it, I changed it to 'version 2' when prompted, saved the .Ibooks file as 'B' and uploaded it to drop box. My editor dowloaded it fine, and it appears in the library but When my editor opens it 'A' opens instead.
• Started again (with a completely different built in IBA template) repeated the process, new book 'A' again worked fine, but this did not change to 'version 2'. same problem. new book 'B' opened as new book 'A' again.
• Started again (again with a completely different built in IBA template) this time duplicated 'A', named it 'C', saved, exported 'C' and 'A' still opened even though 'A' is a different file!
• tried changing the meta-data file title, repeated the process, made no difference.
• tried different drop box account, didn't make a difference
• she tried restoring her ipad, still made no difference
• my editor cannot view IBA files (only .ibooks) so we cannot get around it that way...
so my current issues:
• My editor and I need to find a way we I can create a book, send her a copy and make changes, and send her a new copy, whether by duplicating it or even by re-exporting the original document (and saving a copy as a spare) - but neither currently work - why is this so difficult? this was not a problem before the update, she could have multiple books with similar filenames, all orginating from the same file. (which I now know is not the correct way, but even using templates has not made a difference)
• regarding templates: have I missed somewhere that you can make a template from scratch? I thought the closest you could get was to choose an existing template, delete everything then 'add section/chapter' if I go to 'New' in ibooks author then it still just takes me to the template page so I have no choice but to choose one of the IBA templates or one of the ones I have created myself, given the choice I would always rather start from scratch and a blank page anyway! :-)
Thankyou again

TS1424 iTunes for Windows: 42032 error displays when accessing the iTunes Store.

Has anyone a solution for the following itunes error when I try to open the I-tunes store: unknown error 42032.

Doublechecking. Is that a 42023 rather than a 42032?
If so, perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

ITunes for Windows 7 shows error messsage "this ipad cannot be connected. install 64 bit version" even though itunes was unistalled and latest version installed several times. what's next?

Similar Messages

Maybe you are looking for