Itunes for windows version 8 won't open itunes store

I posted this under a related post as well - My itunes works on my windows pc, but not the store - First message said not enough memory, then yesterday, I downloaded itunes 8 for windows, then it still didn't connect to store, then I checked for all new updates and installed service pack 3, and firewall is off, and made sure I could get a connection to yahoo and I did. Also flushed the dns server. no pop up blockers on, to the best of my knowledge.
One of these discussions says to reset keychain and rename hosts, but I'd like to know if anyone knows anything else to suggest. I will have a more experienced person help me with those things. Apple wrote back to me and sent me to the discussion page as well.

Some one recently posted this as a possible solution, I am afraid I don't have the link.
Go to your Internet Options either in IE or Control Panel, click on the content tab. Then Clear SSL state.
Let me know if it works.
P.S. this is specifically for the not enough memory error.
Failure to connect after an up grade is usually due to firewall blocking - especially if you have Norton.
Message was edited by: polydorus

Similar Messages

Updated Safari for Windows, now it won't open

I'm getting the following error:
"?prototype@JSImmediate@JSC@@CAPAVJS@object@2@VJSValue@2@PAVExecState@2@@Z could not be located in the dynamic link library JavaScriptCore.dll"
How do I resolve this?

Thanks, berky!
The basic procedure for that sort of issue is to uninstall both Safari and Apple Application Support, and then reinstall Safari (which should also reinstall Apple Apple Support). We'll take a few additional explicit precautions along the way.
For XP 32-bit instructions, see the following post:
http://discussions.apple.com/thread.jspa?messageID=10598385&#10598385

I've tried updating iTunes for Windows but it won't work. I removed iTunes and downloaded the new version (10.6.1.7) but it won't load. It says it cannot removed the older version of iTunes.

I've tried updating iTunes for Windows but it won't work. I removed iTunes and downloaded the new version (10.6.1.7) but it won't load. It says it cannot removed the older version of iTunes.

It says it cannot removed the older version of iTunes.
Doublechecking before proceeding ... what's the precise text of that message, please? (There's a couple of different ones I can think of that you might be getting.)

TS5376 iTunes update 11.1.4 for Windows: Unable to install or open. if 11.1.4 is uninstalled, will my library contents be lost?

iTunes update 11.1.4 for Windows: Unable to install or open. if 11.1.4 is uninstalled, will my library contents be lost?

You don't need to open iTunes to back up the library. See Troubleshooting issues with iTunes for Windows updates and look in the further information area for backup advice.
tt2

My video i have successfully worked on for seven days now won't open at all. It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load. But the only option from the error screen is exit out of Premier

My video i have successfully worked on for seven days now won't open at all. It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load. But the only option from the error screen is exit out of Premiere Pro CC. I am on a PC withe Windows 8.1 and apps are up to date. Thanks much for any help!!

Hi Bryan,
My video i have successfully worked on for seven days now won't open at all. It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load. But the only option from the error screen is exit out of Premiere Pro CC. I am on a PC withe Windows 8.1 and apps are up to date. Thanks much for any help!!
Sounds like an activation issue. Quite Premiere Pro. Sign out of Creative Cloud. Restart Premiere Pro. Sign back in: http://bit.ly/CC-sign-out
Hope that works for you.
Kevin

After updating to latest version, Firefox won't open

I am running Windows 7. After updating to the latest version, Firefox won't open. I get a notice when I try to open Firefox saying "Couldn't load XPCOM. Is there a way I can undo the update so I can get Firefox to open. It's my favorite browser...I'm having to use another browser to ask my question.

Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 23: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

When I click on the icon for Adobe Illustrator it won't open what is wrong

When I click on the icon for Adobe Illustrator it won't open what is wrong

Need some more information. What OS and version,what version of AI? Has it ever worked? What has changed since the last time it worked?

ICloud for Windows Version 4.0 Photostream broken

Following the installation of iCloud for Windows Version 4.0 my photostream has stopped updating on my PC. All shared photostreams appear to be fine. My photostream is still working on myother apple devices and apple TV. I have turned my photo stream on and off, uninstalled and re-installed deleted all of the files in the C:/Users/Name/AppData/Roamin/Apple Computer/MediaStream and uninstalled and re-installed. All with no improvement.
Is this a bug in version 4.0?

This workaround will work until Apple fixes the Windows software issue
You need to add at least one photo uploaded to Photo stream from a Mac first. If you don't have a Mac, login to iCloud on your PC, then either borrow a Mac for two minutes, go to an Apple Store or any other store that sells Macs
1. Make sure you are logged into iCloud on your Windows PC and Photo Steam is enabled
2. Find a Mac (Borrow from a friend or a retailer. You only need 10 minutes or less to do this).
3. Go to System Preferences (The gears icon) or you can select System Preferences... from the Apple menu at the top left of the screen
4. Click on iCloud and log into your iCloud account (uncheck the syncing options)
5. Open iPhoto
6. From the "Share" menu at the top of the screen, click iCloud
7. Click Use iCloud
8. Click on Photos in the toolbar at the left and drag a photo to iCloud under the heading "Shared" in the toolbar
9. Stop sharing and Log Out of iCloud on the Mac (see instruction that follows)
IMPORTANT: When you've copied an image to your iCloud Photo Steam, DON'T FORGET TO STOP SHARING FROM THE MAC AND LOG OUT
a. From the iPhoto menu within iPhoto, select Preferences
b. Click on the iCloud icon in System Preferences
c. Uncheck the "My Photo Stream" box
d. Now go to System Preferences (The gears icon) or you can select System Preferences... from the Apple menu at the top left of the screen
e. Click on iCloud and log out of your iCloud account
IF YOU LEAVE AND FORGET TO LOGOUT!
Change your Apple ID password ASAP
https://appleid.apple.com/
Back at your PC, you need to click on iCloud Photos in the Windows tool bar, then right-click on My Photo Stream and choose "Add photos..."
If you try to add them by dragging to the directory location, as was previously possible with the iCloud Control Panel, it does not work.
NOTE:
You cannot add photos that are already inside the "My Photo Stream" directory by using the "Add photos..." file open dialog. It will add them, but in a very inconsistent way. For example, I tried clicking "Add photos..." and selected 12 photos that were already in the "My Photo Stream" directory, but only 5 were actually added to My Photo Stream and iCloud for Windows only showed the first one, of the 12 images I added. However, when I moved the images to the desktop and then added them using "Add photos...", they all appeared in Photo Stream as expected.

I talked to your guys yesterday about installing correct version of Lightroom 5 which I legally owned, and your guy provided me a download link (different from Creative cloud account), but somehow it was for Windows version not for Mac version. I would ve

I talked to your guys yesterday about installing correct version of Lightroom 5 which I legally owned, and your guy provided me a download link (different from Creative cloud account), but somehow it was for Windows version not for Mac version. I would very much like to download a Mac version, so please send my correct web link. By the way my s. number for Lightroom 5 up is [removed], and I also have s.number for 4 up and 3 full.

The latest non-CC version of LR 5 is 5.7.1 and download links are available on the Adobe Updates page:
http://www.adobe.com/downloads/updates/
Both Mac and Win links are there.
If you are asking for a LR 5 CC link, which wouldn't require a serial number, please be more clear about that.

My adobe reader - version 11 won't open a PDF

My adobe reader - version 11 won't open a PDF - I have uninstalled, rebooted and reinstalled it - same problem.

What is your operating system?
Does the same thing still happen if you update to 11.0.4?

After restarting my computer firefox is deleted for Windows, when i try to open firefox a message pops up saying the program has been moved from its original location and is unable to run How do I get Firefox on my computer permanently?

After restarting my computer firefox is deleted for Windows, when i try to open firefox a message pops up saying the program has been moved from its original location and is unable to run How do I get Firefox on my computer permanently?

I have tried everything I could to fix this, but some things require actually being on Firefox, and since I cannot get on, I cannot click on the tabs to do it. I have even totally uninstalled firefox, and that has not fixed this. I still get the same message that firefox is running and I need to close it or restart (which I have also tried dozens of times). I have removed things like Java, and that has not helped either. If I cannot even get on line in firefox, how can I fix this. I am not crazy about using internet explorer, but right now, it is my only option. I even tried to start in safe mode, and the same message box pops up!

3 copies of ipod for windows version 4.7.0 installed on hard drive

We have 3 ipod for windows version 4.7.0 installed on our hard drive each using 169 MB. The computer control panel says they have not been used in 2 years. We have 4 ipods (1st gen nano, 2nd gen nano, 3rd gen nano, 1 shuffle) installed on computer. The last 3 being installed during last 6 months. Can we clear some of this software of our hard drive? without modifying any of our accounts.

We have 3 ipod for windows version 4.7.0 installed on our hard drive each using 169 MB. The computer control panel says they have not been used in 2 years. We have 4 ipods (1st gen nano, 2nd gen nano, 3rd gen nano, 1 shuffle) installed on computer. The last 3 being installed during last 6 months. Can we clear some of this software of our hard drive? without modifying any of our accounts.

How do I enable plug-ins for InDesign CS2 - files won't open

How do I enable plug-ins for InDesign CS2 - files won't open.
I own CS2.
I shouldn't have to buy CS6 InDesign.
How do I open CS 2 files and get the plug ins again.

Asking the same question over and over will not change the answer.

Got a new PC with Windows 8. Now my CS6 for windows 7/XP won't work properly! HELP!

Got a new PC with Windows 8 and now my CS6 download for Windows 7/XP won't work perperly! HElP!

ANYBODY????

Since i updated to itunes 11 for windows 7 it doesn't open any more!!!!

Since i updated to itunes 11 for windows 7, 64 bits, the program dosen't open, I've allready reinstall the 10.7 version but it doesn't work neither any more, what can i do??? I've just repair it, reinstall it, download it from apple's web site but nothing works, please help!!

Thi solved my problem!!!
http://support.apple.com/kb/TS2363

Itunes for windows version 8 won't open itunes store

Similar Messages

Maybe you are looking for