ITunes for Windows XP Pro 64-bit edition?

When I joined the ranks of iPhone 3G owners @ 2 months ago, I was a bit disconcerted to see that iTunes wouldn't work with Windows XP Pro 64 bit edition. (Which is what is running on my primary PC). You Apple guys should know why I DON'T want to upgrade the machine to Vista! (It's running nice & stable on XP-Pro 64-bit). I've been able to sync the iPhone (& update it's software) using my girlfriend's PC (running 32-bit XP Home), but since she's none too careful about stuff like antivirus protection & adware, her machine's buggier than a roach motel! (Really needs to be re-imaged). Could I use the Vista 64-bit version of iTunes on my PC? REALLY rather use it than her machine! Thanks! Tom

There is no version of iTunes that supports the 64-bit version of Windows XP and never will be. If you search this forum for "XP 64" you'll find threads describing the process some people have used to "crowbar" iTunes onto XP 64, with varying levels of success, none of them complete.
Regards.

Similar Messages

Acrobat mas actual para Windows XP Pro 64-bit Edition

Necesito saber cual es el Acrobat Pro mas actual para Windows XP Pro 64-bit Edition.
Saludos!

ola,utilizo desde hace poco tiempo el windows xp 64 y nose como instaler el adobe cs3 master collection, cuando lo intento me pone que solo es compatible con el xp o versiones superiores de windows.
saludos

Adding new Visualizer(s) to iTunes for Windows (Vista/7 64-bit)

I was actually kinda curious, not really a technical question, but are there ways to add other visualizers into iTunes? I ask this in particular, as I have worked with Macs before, and I fell in love with the Jelly visualizer from 10.5, and would love to have that same one running on Windows Vista. Any suggestions as to where other visualizers can be obtained, or how to port one over from Mac to PC?

That version is quite old now, though its fine if you don't have a device that requires a newer version for syncing or want to use the latest features. Should you want to bring things up to date howver, and have problems updating, then for general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

How do I get SP2 for Windows XP Pro 32-bit?

I have Windows XP Pro 32-Bit... But as far as I know it does not have Service Pack 2 (SP2)... The Boot Camp instructions say you need at least SP2 to install boot camp and you can't install XP and then update to SP2... Is there a way around this?

Hi James,
easiest way to verify that your XP CD has SP2 incorporated is to look at the root directory of the CD for a file named 'win51ip.sp2'.
If there, then it is SP2. If not, well...
And there is a way to make yourself a XP CD with SP2 out of your pre-SP2 XP CD by following these instructions http://www.winsupersite.com/showcase/windowsxpsp2slipstream.asp
But you have to do it on a Windows PC.
It might be possible (I haven't tried) to use something like VirtualBox http://www.virtualbox.org/ (or Parallels or VMWare Fusion) and install the pre-SP2 XP.
Then update that installed XP with the standalone SP2-updater and do the slipstream-process.
But as said, no guarantee it will work.
Hope it helps
Stefan

Installing itunes for windows 8.1 64 bit

I just updated my old computeer to a new one with widows 8.1 64 bit and it doesn't let me install itunes on it. it tells me that "the app can not be run in this PC"
some help please?

That version is quite old now, though its fine if you don't have a device that requires a newer version for syncing or want to use the latest features. Should you want to bring things up to date howver, and have problems updating, then for general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

ITunes for Windows 7 Pro, iTunes not recognized

I recently had my Windows computer get a Crypto Locker virus and had to reset it to factory original. I installed iTunes to use with my iPhone 5 and I cannot sink my phone without the program warning me that my phone will be erased and the content replaced with iTunes content. The problem is my phone has a GREAT DEAL more music on it than is listed on my iTunes page. How can I download ALL my music from my phone back into the iTunes program?
Additionally, when I try to access the iTunes store from another program, such as QuickTime, my iTunes installation is not being recognized by QuickTime. It takes me to a page where I can download iTunes again. I have downloaded iTunes and used it to repair the program, and I have also uninstalled and reinstalled iTunes and it is still malfunctioning!
HELP!
Bob

ahhhhhh, many thanks for the link. for a while (about a year ago), Packard Bell UK was including those instructions on their troubleshooting pages, but then they went away. (or i just couldn't find where they'd been shifted to.)
usually nowadays i crank out the MS instructions instructions instead:
(MS) CD-ROM access is missing and messages cite error Code 31, Code 32, Code 19, Code 39, or Code 41 after you remove Easy CD Creator in Windows XP
... but it's a (slightly perverse) sort of comfort to know that i'm still recommending basically what Packard Bell recommends.

Having problems downloading iTunes for Windows XP Pro

My computer had a virus and I had to reinstall my operating system, by doing so I lost everything on my iTunes. I still have the music on my iPod, but when I tried to reinstall iTunes I kept receiving a error message about a XP Logo problem. Can someone please help me with this? I really want my iTunes back to add more music/movies to my iPod.

Bamaguy1960 wrote:
I am having the same problem. Just installed Itunes 9.0 and when I try to log in I get an error message that says problem at the store,,,,try again later. I have uninstalled and re-installed but get the same problem.
Sorry, but no, you do not have the same problem. Your problem is with logging into the ITunes Store, and the OP's question appears to be a problem with downloading the iTunes installer. Please start a new topic with your issue (use the "Post a new topic" link at the top of each main topic page). It's generally better to ask a question as a new topic rather than as a reply in someone else's thread. It's more courteous to the original poster, and is more likely to get your question the attention it deserves.
Regards.

Cannot install and use dell 1130n and hp 1022n in windows 7 pro 64 bit os for dell pc

HP driver list does not appear to offer printer driver online for windows 7 pro 64 bit os. Only win 7 64 bit is visible option on HP and verified PC is a wind 7 pro 64 bit os. Is this why my installed HP 1022n printer will never be able to print? Tried plain win 7 64 bit os and dell pc optiplex 380 but I got nothing. No print. the HP 1102n is default printer. thoughts?

Hi @dazed1 ,
I see by your post that you need the drivers for Windows 7 Pro 64 bit. I would like to help.
I checked the website and there is a Full Feature and Basic driver available for Windows 7 64 bit. HP LaserJet 1022n Printer Drivers. Did you try both of these drivers?
I would try and install the preinstalled Windows drivers, if you are having issues using the downloaded drivers on the site with your Windows 7 Pro 64 bit. Run the Add a printer wizard from Devices and Printers.
You could also plug and play the drivers. Connect the printer to the computer and see if Windows will detect the printer and install the drivers automatically.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Photoshop 7 (& other old Adobe programs) installation in Windows 7 Pro 64 bit

Recently I purchased a new computer running Windows 7 Pro (64 bit) with 2 TB hard drive and 16 GB memory and faced the task of trying to install Photoshop 7, Illustrator 8, Acrobat 8 Pro, and Dreamweaver CS3 that I had used very satisfactorily on my old Windows XP SP 3, 2GB memory computer with less than 1 TB hard drive. I now have all of these running successfully on my new computer and thought I would share here my experience gleaned from a number of other forums after many hours. I had the most problem with Photoshop 7 which I will describe last. In all cases I had the original genuine installation disks. These are generally needed except for Illustrator 8.
Dreamweaver CS3 -- This installed easily in the Program Files (x86) folder & does not seem to require running in XP compatibility mode
Acrobat 8 Pro -- Same as Dreamweaver CS3
Illustrator 8 -- The installation disk would not work for Windows 7 Pro 64 bit. A solution I found in a Microsoft forum is simply to copy the Illustrator folder and contents into the ProgramData folder on the new computer along with the following dll files in the C\Windows folder of the old computer: icccodes.dll, kpcp32.dll, kpsys32.dll, pcdlib32.dll, pfpick.dll, sprof32.dll These go right into the Illustrator folder. This program needs to be run using XP compatibility mode (after copying preceding files go to Control Panel --> Programs --> Programs and Features --> Run programs made for previous versions of Windows -- follow directions there). It might be possible to copy into the Program Files (x86) folder too, but the ProgramData folder works. I have not actually used Illustrator after doing this, but since it started ok, I presume that there will be no problems.
Photoshop 7 -- My Photoshop 7 was an upgrade from Photoshop 5. The PS 5 installation disk would not run on Windows 7 & when I tried the PS 7 upgrade disk (autorun) I got the message that it could not find a previous version of PS & then shut down the installation. I tried the method used for Illustrator 8 above (suggested on yet another forum with an additional dll identified in another Windows folder), but I got the message "Could not complete your request because of missing or invalid personalization information". This evidently had to do with missing authentication serial code number in the registry. I found some discussion of this in forums but no workable fix in my case which involved an upgrade. Then I discovered inormation in another forum which explained that installation with the disks could be done by inserting the upgrade disk and running it from the setup.exe file instead of autorun. When you do this you are presented with the option of proving your previous version of PS by simply inserting the earlier version PS disk at this pint of the process. After doing this the installation with the upgrade disk proceeds fine. The PS 7 program can be installed in the Adobe folder within the Program Files (x86) folder. However, after doing this and trying to start PS 7 you get the following error (if your hard drive is 1 TB or greater in capacity): "Could not inititialize Photoshop because the scratch disk are full" After much reading I learned that this occurs because PS 7 apparently cannot recognize partitions (volumes) 1 TB or greater. What you need to do is set up an additional partition (volume) on your hard drive. This is easy to do. Go to Windows Help, search on "create partition", choose "Create and format a hard disk partition", and follow the directions. I decided to make a 50 GB partion I named "scratch". The system will assign a drive letter to it. To use the new partion to allow PS 7 to start you need to start PS 7 and immediately press the ALT and CTRL keys together. This will bring up a window where you tell PS 7 which drives to use for its scratch disk. You need to select the newly-created scratch disk(partition) in the first choice and leave the other choices as "None". After doing this you have one last issue. When you try to save any file in PS 7 you cannot save it directly anywhee on the C drive since that drive is 1 TB or greater. What I do is save it to the scratch drive and then later move it from there to where I want it on my C drive. I have seen it suggested to install the PS 7 program itself on the newly-created scratch drive, but I don't know if this would allow saving files to the C drive. When installed the way I have described it does not seem to require operating in the XP compatibility mode.
Hope this helps those of you who prefer working with the programs they are used to on Windows 7 Pro 64 bit.
Ray

Hello Nikhil.
Can you see here?
MAIN MODULE INFORMATION:
   SAP GUI for Windows
   SAP Logon Pad for Windows
   730 Final Release
   7300.1.0.1074
   1337608
SYSTEM INFORMATION:
   Operating system: Windows 8 Pro 6.2 (9200)
You are using patch 0 for Windows 8
Windows 8 is not supported until patch 1 or higher is applied, and for Windows 8.1, you must use
Patch 7 or higher,.
Apart from that the error is not from the GUI side,
See below:
Previous frontend interpretation time   :           109 ms
Previous server response time           :          5078 ms (for 1 roundtrips)
The frontend interpretation time is only 100 ms whereas the server time has taken 5000 ms
Please use a supported version for the OS you intend to use.
You can find this information in note
http://service.sap.com/sap/support/notes/66971
Jude

Drivers and software Hp deskjet 2050 j510a All-in-wonder for Windows 8 Pro x64

Hi,
from when I update my system with Windows 8 Pro I can' t use the printer Hp Deskjet 2050 J510a.
I downloaded the latest version of drivers and software for Windows 8 Pro 64 bit:
DJ2050_J510_Basicx64_1313.exe
The application give me at the and of installation the message:
"installation not completed"
and in details I can see:
"Installation error. Operative system not supported. This software can be installed only in Windows XP, Vista, Seven. Change operative system or install the printer in another computer."
The printer as been recognized from the system, and in panel control I can see it, but when I print any page the printer make only half print and than show me a message of " not original or used printer cartridges, press OK to continue or cancel do delate the print" but the print cannot be completed untill the end.
Cartridges are original; I tested the the printer too in an another computer with different operative system: the printer work correctly.
Thanks for your attention

Hello kamran554,
I understand you are looking for the driver to download for your Deskjet 2050 J510a for Windows 8 64bit.
I have located the correct driver for you to download below.
Please click the link to download and install.
HP Deskjet Full Feature Software and Drivers
Good luck to you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

ITunes for Windows Vista 64-bit editions

Simple question: when will iTunes support 64-bit Vista? No useless "64-bit shouldn't be used by anyone"-style answers, please. Assume I know exactly what I'm doing
Windows Vista Ultimate 64-bit Edition

Simple question: when will iTunes support 64-bit
Vista? No useless "64-bit shouldn't be used by
anyone"-style answers, please. Assume I know exactly
what I'm doing
Windows Vista Ultimate 64-bit
Edition
Simple answer, Nobody knows.

Install iTunes on Windows XP Pro x64 Edition

I just recently purchased a new system (Windows 64-bit) running XP Professional x64 Edition Service Pack 2.
Is iTunes supported for XP Pro x64 Edition?
Thanks for any help.

No, there is no 64 bit edition of iTunes for Windows XP, only Vista.
You can, however, install the 32 bit version. You will then have to download and install the 64 bit Gear drivers for burning from the Gear site:
http://www.gearsoftware.com/support/drivers.cfm
Unfortunately you can not get the 64 bit drivers for the iPhone and Touch. If you have one of these, you may find this link interesting:
http://yukichigai.googlepages.com/iphonex64

I am using Windows 7 Pro, 64 bit on a brand new PC, and cannot connect to the iTunes store using iTunes version 10. HELP!!

Ok, so after purchasing a new computer, with windows 7 pro, 64 bit, I tried downloading the newest iTunes, which at the time was 10.2.1 (i believe). After installation, everything seemed to work, except that iTunes was unable to securely connect to the internet, use home sharing, or validate my computer.
As troubleshooting, I first ran msconfig, and then turned OFF all programs that boot at start up EXCEPT itunes and quicktime. After a restart, i opened itunes again, and got the same result. That led me to believe that iTunes was NOT being blocked by another program on my machine. I am currently running itunes 10.7 successfully on a Windows 7 32 machine at work. Anyhow, for grins, I tried to install version 9 on the new computer, and it installed perfectly, and immediately connected to the itunes store, leading me to believe that there is nothing wrong with my software configuration (not sure if this is a safe assumption or not). I then tried to let iTunes update itself using the automated update function. It tried to update itself to the most current version, then 10.6. Again, iTunes was unable to connect to the iTunes store. I HAVE tried disabling the anti-virus software (AVG), but that made no difference.
I have since gone back and reinstalled iTunes 9. Here's the catch though. When I reinstalled using version 9, I had to redo all my library files. I'm about 1/2 way through my CD's, and now have a substantial library file going. The last time I let iTunes update itself to 10.6, once I realized that it was not going to connect to the store, I uninstalled iTunes, and reinstalled ver. 9. However, when I did this, it told me it could no longer open the library file, because it was a newer .itl or .xml (i believe it was one of those two extensions) library file. At that point, I basically started everything over again, using version 9, and have been importing CD's like a madman at night.
Here are my questions:
1) Is there a way to make a copy of the files that store my library info, so that if my upgrade to ver 10 IS NOT SUCCESSFUL, I can restore ver 9, but still have all of the album art work, playlists (when I import music, I create a playlist with the artists' name, and store things that way), etc. in tact?
2) What else can I try (firewall settings, internet options, etc.) to try and get version to to successfully install? I would really like to get all the benfits of the newer versions.
3) When I tried to get apple tech support before, they wanted me to pay a ridiculous 69$ fee for phone support. I just bought an iphone 5....this should entitle me to a fresh 90 days of phone support, right? The reason I ask here is that I could hardly understand the "tech" that answered the phone when I called for tech support last time, and to be honest, it really ****** me off that they wanted to try and milk me for another 69 bucks....I've purchased every iPhone since the 3Gs came out (pre-ordered at that), and have nearly gone broke purchasing music from their iTunes store....heck, maybe they're doing me me a favor not letting me into the store, huh?
Any help or ideas would be greatly appreciated,
-Brian

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

With previous editions of iTunes for Windows, I could play a CD at the same time as it was being imported. That does not work anymore. Why not, and is there a way to do both with the most current version?

With previous editions of iTunes for Windows, I could play a CD at the same time as it was being imported. That does not seem to work anymore. Why not, and is there a way to do both with the most current version? I am running a Surface Pro 2 with Windows 8.1 and the most recent vesion of iTunes, which, in all other respects, works well. I just can't listen to an album for the 1/2 to 1 hour that it takes to import it into my library.

Two JVM's ? I thought that J2EE worked within a single JVM and run everything in containers. Can you see the two processes?

Installed iTunes 11.0.4.4 64-bit but window 8 pro 64-bit in task manager reports that iTunes is 32-bit. Why? Not running in compatibility mode. Uninstalled and reinstalled. Same result.

Installed iTunes 11.0.4.4 64-bit version. Now windows 8 pro 64-bit reports iTunes as 32-bit in task manager. Why? Both my computer and operating system are 64-bit. ITunes is not running in compatibility mode. All my music files are MP3. I uninstalled iTunes and downloaded iTunes64setup.exe from apple and still having the same result. This was a clean install by-the-way.

Hello irie00,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Best of luck,
Mario

ITunes for Windows XP Pro 64-bit edition?

Similar Messages

Maybe you are looking for