ITunes freezes after importing one cd and alters normal computer function

After I import one CD, my computer will not recognize any other cds I insert and itunes freezes. After I force itunes to quit, my computer continues to "act up" and will not retrieve any webpage information from the internet. If I try to restart itunes it fails to open and does not give me any sort of error message. I have to reboot my computer to resume normal function.
I did the remove and reinstall of Quicktime recommended in other discussions since those problems seemed similar to mine. However, it didn't do the trick.
I am running McAfee, not Norton.
Thanks for any suggestions.
  Windows XP  

Also having issues with similar problem. Also cannot burn CD's with new music purchased, however, old music works perfectly. I noticed that after purchase, there is also a return on the account purchasing FROM. DOn't know if this means that the music is no longer licensed, as it would seem that it is unpaid for at this time. Are you able to assist? This would be easier by phone, but no phone support available.

Similar Messages

  • Itunes freezes after importing CD

    Itunes works fine, if just listening and navigating through my library, but when I import a new CD via the CDROM, itunes freezes up and it is necessary to restart the computer to get itunes to work properly again. I am currently using Itunes 7.5 as I am afraid to upgrade after reading all the problems in these discussions, not chancing on making things worse. This problem started obvioussly after agreeing to Apple's suggestion to upgrade itunes software.

    Does it freeze if you just import one song?

  • ITunes freezes after playing one song

    Since upgrading to the new iTunes that was released today, after playing one song in iTunes in Windows, the program freezes and the only way out is to End Process on it. This only happens the first time that Windows starts up. After iTunes freezes and I End Process on it, and then run it again, it doesn't have this problem until the next time that Windows starts up.
    Anyone know what's going on and how to fix it?

    Turns out "Windows Media Player Network Sharing Service" was doing something that held up the computer when I used iTunes. So I followed these steps to disable the service permanently (since I don't use Windows Media Player): http://www.addictivetips.com/windows-tips/fix-wmpnetwk-exe-in-windows-7/

  • After upgrade to  9.1.0.79 iTunes freezes after importing CD

    I've just upgraded this morning to iTunes 9.1.0.79 on my Windows 7 laptop.
    After the upgrade, everything looked OK, except when loading a CD it seemed to be loaded by Windows Media player rather than iTunes (and didn't show up in the iTunes DEVICES) so reassociated iTunes when prompted and rebooted laptop
    Still had the same issue, but found that if I didn't start iTunes first, then it would prompt me to import the CD. However then found that after loading the last track, iTunes would freeze up and show as "Not responding" in Taskmgr. The only way out was to kill iTunes process. All album tracks were imported, except the last one.
    After a couple of reboots and checks, I was just doing a final re-run to make this post and everything suddenly seems to now be working... i.e. with iTunes running, if I put in my CD it now imports it for me and doesn't hang
    I am a little nervous about this as I haven't done any changes since it didn't work...
    Has anyone seem something like this before with this version ?

    OK, so here's what is happening now....
    The only way I can get CDs imported now is to
    1. load a CD without iTunes loaded, so it then launches iTunes for me and I can click the Import button
    2. After that, if I change the CD then iTunes will give me the prompt to import the CD
    3. After two or three CD changes, it stops prompting me, so I have to go back to step 1 again
    Bizairely, even when it doesnt list the CD, it still allows me to eject the CD succesfully, so it seems to know it's there....
    Seems like a bug in the latest update to me, as I had auto import of CDs working fine just a week ago.....

  • When I play songs on my itunes account, they stop after about one minute and itunes goes to the next one.  how do I fix this? These are songs in entire albums that I have purchased.

    when I play songs on my itunes account, they stop after about one minute and itunes goes on to the next song.  This is happening with songs on albums I have purchased direclty through itunes

    Assuming you are in a region where you are allowed to redownload your past music purchases, delete the broken files from your iTunes library, go to the iTunes Store home page, click on the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
    If you don't see them straight away it may help to close and restart iTunes.
    While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
    If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
    See also: HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
    tt2

  • Itunes refuses to import one file

    Itunes refuses to import one file. This file is unprotected, mp3 audio file of 72.3MG which happens to be a 'teach youself spanish' CD downloaded from Win/MX. As far as I can see thsi file does not differ from other files which itunes lets me import, apart perhaps from its length (it is over two hours long). itunes produces no message to explain why it will not import the file and so i am perplexed...

    hi Jack!
    hmmmmm. just checking. can WMP import and play this file? if so, can you convert it to another file format in WMP, like AIFF? if so, will itunes accept the file when it is in that format?
    (a clunky workaround ... even if it works)
    love, b

  • Itunes freezes after upgrading to OS X Mavericks v10.9.3 on connecting iPhone 5

    Itunes freezes after upgrading to OS X Mavericks v10.9.3 on connecting iPhone 5.
    I tried it with a differnt Iphone and the results are the same. Any suggestions?

    Hi JZN1994,
    Welcome to the Apple Support Communities! I understand that after updating your computer to 10.9.3 iTunes stops responding when an iPhone is connected to it. There may be few different steps you will need to go through to get this resolved. I suggest working through the steps in the attached article.
    iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ts3219
    Thanks for reaching out, 
    -Joe

  • Freeze after import from built-in iSight

    I go to File > Import from Camera..., record my lovely visage, and then I click Done. iMovie imports the new video just fine, I see it pop up in the little clips tray, but then I'm faced with a problem.
    The capture window is still open and if I click the "Done" button or close the capture window, iMovie just freezes and I have to force quit.
    When I re-open iMove, everything is fine, my project and the new clip still exist, but I've just wasted a lot of time.
    It happens every time and it's really frustrating. What's going on?
    Console offers little of interest...
    3/28/08 12:51:43 AM iMovie[19101] CFDictionaryAddValue(): immutable collection 0x2630a390 given to mutating function
    3/28/08 12:55:01 AM com.apple.launchd[169] ([0x0-0x38c38c].com.apple.iMovie7[19101]) Exited: Terminated
    Message was edited by: Iynque

    There are a few other threads out there based on iMovie freezing after importing, but most are people importing from other devices, not the built-in iSight camera. None has any good advice about how to correct it, that I can see.
    I suppose the good news is it's not a problem endemic to the iSight camera capture option itself. I'm willing to bet it has something to do with disk fragmentation or dropped frames during capture -any of which a standard NLE would tell you about instead of crashing.
    I guess the usual salvo of countermeasures are called for: verify the target volume using disk utility, defragment the drive, try building a new user account on your Mac and try the capture again (just to rule out any unruly preferences in your current config). Worst case, reinstall iMovie and see if it keeps happening. Now, having said all that, I haven't actually taken the time to try it myself. So, grain of salt, and all that.

  • I have got a lot of apps, which are not installed on any of my iDevices anymore. is there a possibility to remove all those apps from iTunes without searching which ones are, and which ones aren't installed on one of my iDevices?

    I have got a lot of apps, which are not installed on any of my iDevices anymore. is there a possibility to remove all those apps from iTunes without searching which ones are, and which ones aren't installed on one of my iDevices?

    Assuming all the device(s) have been synced to this computer as its Home computer. The easiest way would be to delete all the apps from iTunes. After which connect your device(s) to the computer (iTunes) and transfer purchases from the device(s) by right click (control click) the device name in the left sidebar and the click transfer purchases. When done only the apps on your device(s) will be in you iTunes library.
    Hope that helps

  • Itunes freeze after 10.9.3 update...

    itunes freeze after 10.9.3 update...
    it seems looking for the store and then freeze...
    anyone else? suggestion?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
    SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

  • ITunes Freezes while importing from CD

    When importing songs from a cd to iTunes, iTunes freezes while importing the last few seconds of the last song.
    i have run cd diagnostics and included the results below.
    help would be greatly appreciated.
    Microsoft Windows XP Professional (Build 2600)
    System manufacturer System Product Name
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    UpperFilters: GEARAspiWDM (2.0.4.3),
    IDE\DiskSAMSUNGSV0411N________________________UA100-08, Bus Type ATA, Bus Address [0,0]
    IDE\DiskWDCWD1600JB-00GVA0____________________08.02D08, Bus Type ATA, Bus Address [1,0]
    USBSTOR\DiskGenericUSB_CF_Reader__1.01, Bus Type USB
    USBSTOR\DiskGenericUSB_MS_Reader__1.03, Bus Type USB
    USBSTOR\DiskGenericUSB_SD_Reader__1.00, Bus Type USB
    USBSTOR\DiskGenericUSB_SM_Reader__1.02, Bus Type USB
    IDE\CdRomCyberDrvCW099D_CD-R/RW_________________140M___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomHL-DT-STRW/DVD_GCC-4481B_______________1.04___, Bus Type ATA, Bus Address [1,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    I: CyberDrv CW099D CD-R/RW, Rev 140M
    Audio CD in drive.
    Found 15 songs on CD, playing time 59:03 on CDROM media.
    Track 1, start time 00:02:00
    Track 2, start time 03:14:00
    Track 3, start time 06:59:07
    Track 4, start time 10:35:37
    Track 5, start time 14:05:02
    Track 6, start time 17:39:57
    Track 7, start time 20:47:35
    Track 8, start time 24:44:17
    Track 9, start time 29:41:15
    Track 10, start time 34:12:65
    Track 11, start time 37:35:15
    Track 12, start time 41:05:52
    Track 13, start time 45:39:50
    Track 14, start time 49:59:70
    Track 15, start time 55:15:70
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 12 16 20 24 28 32 40 48 52.
    The drive CDRW speeds are: 4.
    K: HL-DT-ST RW/DVD GCC-4481B, Rev 1.04
    Drive is empty.

    i've got this problem when I change my ipod nano to ipod Generation 5

  • My iTunes will only play one song and then stops.

    In a playlist, my iTunes will play only one track and then it stops. Won't move to the next song, won't work in shuffle mode, just plays once and that's it! Any ideas? This just started a few days ago, maybe with a recent iTunes update? I'm in 11.0.3 (and of course, my AppleCare has just expired).

    Hello kitkatmac
    I would check to make sure that the songs in your playlist are check in the checkbox section. If they are not the songs will play and then stop once it is done playing like you have described.
    iTunes Help: Ways to play songs
    help://bookmark='https://help.apple.com/itunes/mac/11.0/help/index.html?localePa th=English.lproj#itns2989
    Thanks for using the Apple Support Communities.
    Regards,
    -Norm G.

  • ITunes freezing after 20 secs of syncing iPhone 3G ......

    iTunes freezing after 20 secs of syncing iPhone 3G>...... HELP
    it started to do this around 4 hours ago, i Havnt done anything abnormal....
    I have re-installed iTunes with no success... any suggestions??
    Thanks

    Left it to sync for an hour problem resolved

  • A1145 imac g5 isight, freezes after 2-5 mins and then there no power from keyboard and mouse. Changed HDD and no luck and on the install page it freezes. You have to force it to shutdown and leave it for 5-10 minutes and try to turn it on again AHT Passed

    A1145 imac g5 isight 2.1GHz
    , freezes after 2-5 mins and then there no power from keyboard and mouse. Changed HDD and no luck and on the install page it freezes.
    You have to force it to shutdown and leave it for 5-10 minutes and try to turn it on again
    Apple HardWare Test Passed
    10.5.11
    Orginal DVD's 9.2

    Could be a heat problem.
    Also, try these:
    Resetting the SMU on a G5 iMac:
    http://support.apple.com/kb/HT1767
    and on resetting the PMU on a Power Mac G5, G4 and G3 :
    http://support.apple.com/kb/HT1939?viewlocale=en_US
    http://support.apple.com/kb/HT1436

  • HT201302 How do i importing personal photos and videos from Computer to my iOS device.

    How do i importing personal photos and videos from Computer to my iOS device.

    Read here:
    http://support.apple.com/kb/ht4236

Maybe you are looking for

  • Problem with ending user session in backend with BSP

    Hi, I'm having this strange problem.  When I use the standard SAP Budgeting Maintenance BSP application for Enterprise Compensation Management, whatever sessions I have opened doesn't close it automatically in the backend system when I close the BSP

  • Frm-92101 happens when I open a form from another form and close it.

    Frm-92101 happens when I open a form from another form, check something, show a message to the user and exit the form to the previous form. Forms version: 10.1.2.0.2. Java: 1.6.0_23. Browser: IE6 When I put before the "EXIT_FORM" two messages, everyt

  • Keynote flip up picture on VGA projector

    Hi all, I'm using Keynote on iPhone 5s iOS 8.1.1 for presenting on LCD projectors via Lighnitng->VGA adaptor. However in one class there is an old ceiling mounted projector with no flip image option. Other lecturers use Windows PCs on which they flip

  • Change Request Management for Implementation Project

    Hello gurus! I have a problem with execution change request in implementation project. I have created Implementation project and task list for him."Change request management" is active for this project. I can create document Change Request, but I can

  • Lost the thumbnails in safari top sites homepage.

    Ok, confession time... I think I actually turned them off playing around with a free trial of Cocktail. Then, the next time I launched cocktail, it told me I had reached the end of my free trial and wouldn't let me do anything, i hadn't even realisee