Itunes freezes after plugging in ipod

I need help!!!
Okay, I downloaded itunes 7 and everything was fine. Music playback, sound quality, and my playlists were fine. So I installed version 1.2 of the ipod software. Now everytime I update my ipod, itunes freezes in mid-update and doesn't respond.

If you are subscribed to lots of podcasts, go change them to manually update.
Which is what I had my preference set for in v6, but v7 changed it back to auto update podcasts. And with about 15 podcasts going...it brought my PC to its knees.
Hope that helps!

Similar Messages

  • My new ipod classic 160 gb powered off and won't turn back on. if i plug in to computer, itunes will not open. if i start itunes first then plug in ipod, itunes freezes up. Looking for help. thanks

    my new ipod classic 160 gb powered off and won't turn back on. if i plug in to computer, itunes will not open. if i start itunes first then plug in ipod, itunes freezes up. Looking for help. thanks. Was not connected to the computer when ipod died.

    I have not heard of a good reason for this to happen or how to fix. 3 days later my screen lights up and says to connect to charger.... so its back "for now". Best music player on the market when it works.

  • Itunes freezes after upgrading to OS X Mavericks v10.9.3 on connecting iPhone 5

    Itunes freezes after upgrading to OS X Mavericks v10.9.3 on connecting iPhone 5.
    I tried it with a differnt Iphone and the results are the same. Any suggestions?

    Hi JZN1994,
    Welcome to the Apple Support Communities! I understand that after updating your computer to 10.9.3 iTunes stops responding when an iPhone is connected to it. There may be few different steps you will need to go through to get this resolved. I suggest working through the steps in the attached article.
    iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ts3219
    Thanks for reaching out, 
    -Joe

  • Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer.

    Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer. The version installed on my ipod is 7.1.2(11D257).

    Hi donfrommars,
    Welcome to the Apple Support Communities!
    Please use the following article for information and instruction on deleting the U2 album from your devices and account.
    Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases
    Have a great day,
    Joe

  • I just got an ipod touch and downloaded itunes. when i plug my ipod in and open itunes it wont read my ipod. i looked up in 'help' and it says to go to devices and click add. but there is no 'device' button anywhere? can anyone help me please?

    i just got an ipod touch and downloaded itunes. when i plug my ipod into my computer itunes doesnt read my ipod. i looked it up in 'help' in itunes and it said if itunes doesnt read your device to click on 'device' and  hit add. but i dont see a 'device' button anywhere. can anybody help m eplease?

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • I upgraded my PC from Win7 to Win8 and installed itunes, when I plug my ipod in it wants to erase it as its sync'd to another PC.  How do I fix this a I dont want to loose my playlists?

    I upgraded my PC from Win7 to Win8 and installed itunes, when I plug my ipod in it wants to erase it as its sync'd to another PC.  How do I fix this a I dont want to loose my playlists?

    The iphone is not a storage/backup device.  The sync is one way - computer to iphone.  The exception is itunes purchases:  File>Transfer Purchases
    Copy everything from your other library/computer, or your backup copy, to your new library/computer

  • How do i get my computer to start itunes when i plug my ipod in please

    Dear All,
    How do I get my computer to start up itunes when I plug my ipod in.

    - With the iPod connected to the computer go to the Summary pane in iTunes for the iPod and under Options check the box that says open iTunes when the iPod is connected.
    - If when you manually open iTines and connect the iPod the iPod does not show in iTunes:
    iOS: Device not recognized in iTunes for Windows
    or
    iOS: Device not recognized in iTunes for Mac OS X

  • ITunes freezing after 20 secs of syncing iPhone 3G ......

    iTunes freezing after 20 secs of syncing iPhone 3G>...... HELP
    it started to do this around 4 hours ago, i Havnt done anything abnormal....
    I have re-installed iTunes with no success... any suggestions??
    Thanks

    Left it to sync for an hour problem resolved

  • After plugging my ipod into my mac mini, my screen split into 2 duplicate screens, one on top of the other. How do i make that go away?

    after plugging my ipod into my mac mini, my screen split into 2 duplicate screens, one on top of the other. How do i make that go away?

    I am not sure about everything, but there is something that may fix some of your problems. Go to System Preferences, and choose the "Universal Access" preference pane. In Universal Access, turn off VoiceOver, Zoom (seeing tab), Sticky Keys, Slow Keys (Keyboard tab), and Mouse Keys (Mouse tab). Make sure the "Enable access for assistive devices" checkbox, which is at the bottom of the preference pane. From there, look at other options and see if they are things you want turned off, or changed from how they are set. If you don't know what different options do, click on the help icon at the bottom left corner of the window. And if you are still baffled, ask here and someone will tell you what it does.
    If you use any of the universal access options or think they could be useful, feel free to leave them on.
    Also, go to the Keyboard and Mouse preference pane, choose the Keyboard Shortcuts tab, and make sure there are no strange keyboard shortcuts set that may interfere with the keys you are having issues with.
    Did you install any new software before this started happening, and if so, how many days before it started happening?
    Let us know if these tips get you anywhere.

  • Itunes freeze after 10.9.3 update...

    itunes freeze after 10.9.3 update...
    it seems looking for the store and then freeze...
    anyone else? suggestion?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
    SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Itunes freezes after I plug in my 4.3 updated Iphone.

    I updated itunes to the most recent version and then updated my iphone4 to version 4.3. Everything seemed to have finished and worked ok until I went to try and sync my iphone again. I open itunes and it works fine but as soon as I plug in my iphone itunes frezes and my iphone never shows up. As soon as I unplug the phone itunes works fine again. Same with the iphone, as soon as its not connected everything works fine but when I connect it itunes freezes and in task manager it says that itunes is not responding. Any help will be appreciated.
    Thank you,

    Here is the actual solution.  This was making me crazy too.
    Make sure you have the latest version of iTunes (8.0.2)
    Plug your USB cable into your computer.
    Turn your iPhone off by holding the power button down until you see “slide to power off”. Do as instructed.
    Now press and hold the Home button while reconnecting the USB cable to your iPhone. After iPhone is connected it should power on the device.
    Continue holding the Home button, you will see the Apple logo appear and then finally a “Connect to iTunes” will be displayed, now is the time to release the Home button. You will then see the following image:
    After this DO NOT RESTORE YOUR DEVICE!!
    Unplug your device and turn it off holding the power button only.
    Now start your device again, it will start up like normal.
    Now plug it back into your computer.
    Itunes should see it as normal and not freeze anymore.
    Good Luck!

  • ITunes freezes after upgrading, and connecting ipod.

    itunes freezes and hangs after connecting ipod touch. I have reinstalled itunes and got it to work ONCE! Please help! I have tried EVERYTHING on the apple website and NOTHING works.

    Hi JZN1994,
    Welcome to the Apple Support Communities! I understand that after updating your computer to 10.9.3 iTunes stops responding when an iPhone is connected to it. There may be few different steps you will need to go through to get this resolved. I suggest working through the steps in the attached article.
    iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ts3219
    Thanks for reaching out, 
    -Joe

  • ITunes freezes, can't update ipod, windows and itunes doesn't see my pod

    I have a 2nd gen Ipod with the really sensitive buttons under the screen and whenever I try to plug my ipod into my PC w/xp nothing good happens. It used to be fine about a month ago and now its screwing up. I never dropped it or did anything bad to it.
    I plug it in.
    I get a windows error message in the bottom right that says "this blah blah blah has malfunctioned and windows can not recognize it"
    That message soon goes away and windows makes that little ding sound.
    After that iTunes just freezes up. I cant minimize it, play songs, or do anything. completely frozen.
    My Computer doesnt even see it.
    The ipod flashes "do not disconnect" until I unplug it.
    When I unplug it itunes starts working after a couple seconds.
    Sometimes it will completely drain the battery right after I charge it fully and it will reset itself and stay off.
    anybody know whats goin on?
    Ive done pretty much everything on this website to fix it and nothing.
    2nd Gen   Windows XP  

    Are you sure that there is no way to change the
    format?
    I never said there wasn't a way to change the
    format.
    To change the format, select it in iTunes on the Mac
    and select Restore.
    I am having a similar issue with my daughters ipod nano. It was formatted for windows when we bought it (we have the songs on a mac) but it only downloads some of her library not all. Having looked in some of the forums it suggests restoring however when we plug the ipod into the mac the button for restoring the ipod to factory settings is not highlighted. In this case how can the ipod be restored to a mac setting? We are using the latest itunes software and OSX operating system.

  • Itunes freezes when connecting and ipod does not show up

    When I connect my nano 3rd gen in windows vista using itunes 9 my ipod does not show up and itunes freezes. the ipod remains with the connected screen and I cannot close out of itunes. Any help would be wonderful... Thanks!!

    I have (finally)solved the problem with my iTunes freezing! Here's what I did:
    1.I backed up my entire music library to an external hard drive.
    2.Then I completely uninstalled iTunes 9 from my computer.
    3.After a re-boot I then completely deleted my entire music library. (this can be a little scary so I double checked my music library back up on the external drive)
    4.I Googled iTunes 8 and found it at
    http://www.mydigitallife.info/2009/06/28/apple-itunes-8-2-and-quicktime-7-6-2-di rect-download-links/
    5. I downloaded it but before I installed it I copied my music library back to my computer. I did not copy everything that was in my original iTunes music folder however, I only copied the music,album art work, applications,games,Tv shoes, and podcasts folders. I placed those folders in a new folder called iTunes on my computer. I did not include any of the iTunes database files eg: .itl / .xml / or .itdb files as these were created in iTunes 9.
    6. Now I opened iTunes 8.2 and added all of my music and other media content.
    7. Next I attached my iPod nano to my computer. Then Windows automaticly open a window asking me if I wanted to scan for problems or continue without scanning. I had windows scan for problems and once that was done my iPod nano began to sync. Oh what joy!
    I think, and this is only a guess based on what I've read here on Apple's discussion pages and my own experience, that there is a problem/conflict or bug with iTunes 9, Windows Vista and the 3rd -4th generation iPod. I will NOT be upgrading to iTunes 9 until Apple has addressed this issue. It seems to me that there are a lot of people having similar issues.

  • ITunes freezes when i connect iPod?!

    I've had my iPod one week - one week!!! - and already something has gone wrong.
    iTunes works fine when I'm just listening to music or what have you, but when I plug in my iPod, within a few minutes the iTunes freezes. iPod says not to disconnect, I have no choice but to, and have to alt-control-delete to get rid of iTunes.
    iPod seems normal....plays fine when I'm using it and stuff. Basically they work fine independently but when I connect them, it all goes wrong.
    So is it the iPod or the iTunes that's poorly, and how do I fix it?! Please help!
    Lucy. x

    OKay, I've somehow managed to fix this problem (not sure how, changed the settings I think) but in doing so I've managed to wipe my iPod, and when I tried to put music back on, half the music has suddenly got exclamation marks by them and won't play.
    What have I done?!

Maybe you are looking for

  • Logical System in IDOC-XI scenario

    Hi,      I need help to understand few things in IDOC-XI scenario, could any one help me in this regard.     we use Adapter specific identifiers to map services, we have following type of identifiers 1) Sys.ID & Client No.  2) Logical System.  my que

  • Problem With Oracle Personal Edition On Windows XP

    I am trying to install Oracle 8i Personal Edition on Windows XP Professional, Installation was successful. But when I try to login through SQL plus it says "ORACLE not available" User Id I used is Scott/Tiger and System Manager. Even I checked the se

  • How to restore iTunes library from TimeMachine external hard drive backup after clean install

    I was not able to solve this problem, hence I decided to open this discussion. 1. Recently, I clean installed Yosemite so my new Mac is completely empty. 2. I have my time machine backup on my eternal hard drive and would like to restore only specifi

  • What is the best way to create shared variable for multiple PXI(Real-Time) to GUI PC?

    What is the best way to create shared variable for multiple Real time (PXI) to GUI PC? I have 16 Nos of PXI system in network and 1 nos of GUI PC. I want to send command to all the PXI system with using single variable from GUI PC(Like Start Data acq

  • Use speakers and headphones at the same time

    Hi! Is it possible to use both exits to play different songs? I mean, use speakers and headphones like different channels, I'd like to use them to mix music and it would be very useful if I could listen a song by headphones while the other one is pla