ITunes freezes up when connecting ipod

Okay I know this was a topic a few weeks back. iTunes has been freezing up when I start it either by clicking on the icon and then connecting the ipod or when I connect my ipod first and then itunes starts up. This was apparently a problem caused by the recent upgrade. I have been prompted to upgrade to a newer version. And of course because I am posting this when I just opened itunes the prompt did not come up.
My question is will this upgrade fix the previous problem caused by the previous upgrade? I've found that if I let my ipod stay connected that somewhere between 10-40 minutes will pass and itunes will recognize it. I'm running Windows XP on a Dell Laptop.

Try the basic 5Rs from Apple Support website.
http://www.apple.com/support/ipod/five_rs/classic/
Have a nice day!

Similar Messages

  • ITunes stop working when connecting ipod 4th generation on Vista

    When connecting ipod 4th generation to a computer running Vista Ultimate, ITunes (version 8) closes. Windows provide the following message - iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
    Thanks!

    i have the same issue... but i found a workaround.. i tried 3 diff OS's . didnt change the problem. To Add apps or music to ur Ipod... simply DISCONNECT the Ipod from the PC then add files/folders to library. Then connect the ipod back to PC and sync. it has no problem adding the files that way (at least in my case) I hope this helps... Good Luck =)

  • BSOD when using Itunes And/Or when connecting IPOD classic

    I have started getting a blue screen of death (BSOD)when opening Itunes followed by opening Iexplorer after a computer restart. I also get the same error when connecting the Ipod 80gb classic, it may take 3 or 4 attempts to get the Ipod conencted, initial recognition but then "ok to disconnect" within 10 seconds.
    Error code is 1000007e, parameter1 c0000005, parameter2 804e83e8, parameter3 f7938a68, parameter4 f7938764. with no driver of sys file identified.
    Currently driving (no pun intended) me crazy. I have updated all drivers I can think of, uninstalled and reinstalled Itunes and Apple Ipod device drivers with no solution.
    Thanks
    Ken

    See this page from another forum member turingtest2.
    Grouping Tracks Into Albums
    B-rock

  • Device not recognized in iTunes, freezes program when connected, no sync

    Problem: iPod is not shown as a device in iTunes, but is shown as a drive on the computer...when connected it shows "connected, eject to disconnect" but it stays there indefinitely and I give up after 5 minutes...sometimes I get the "scan and fix" suggestion but it can't do it because it is in use...if I just disconnect it iTunes then tells me it can't sync because it doesn't have the related file...will sync just fine to the iPhone 3GS
    My iPod hasn't been synced very often but I always make sure I have the latest iTunes software version. A few months ago I got an iPhone 3GS as well, and the problems seemed to start at that point. I want the songs to be on the iPod, not the phone, however, sometimes I download songs on the phone and need to transfer them into my iTunes library. I know I can have the songs on the phone but I don't necessarily want them there, although I just totally gave up and synced them to the phone tonight so I have something to listen to at work.
    So, I plug in the phone and sync it, then transfer the songs, move them to the playlist I want them in, then disconnect the phone. No problem there. Then I decide I want to sync the revised playlist onto the iPod. When I plug in the iPod, it simply displays "connected" and "eject before disconnecting." It will stay that way indefinitely until I just unplug it. Once in a while it will show "synchronizing" for a few seconds and then it goes back to "connected." It is at that time it wipes everything off the iPod but does not put anything back on it. During this time I cannot operate at ALL in iTunes - I can't click anywhere or select anything. It's totally stuck until I unplug the iPod. The device is not displayed at all in iTunes (devices isn't even shown as an option), but it is shown as a drive on my computer. Often iTunes will suggest I scan and fix the disk, which I select to do, except then it tells me it can't do it when the disk is in use. I have tried shutting everything down and rebooting. I think at some point tonight I was able to scan and fix.
    I have tried all the Rs up to restore. I can't do that because I can't get iTunes to recognize the iPod is there. I have: 1) updated Windows 2) uninstalled and reinstalled iTunes; 3) moved the hold switch and pressed the center and menu buttons at the same time, 4) moved it to a different USB port. In January I went through the whole rigamarole of restoring the iPod to factory settings, although I don't even know how I did that now.
    This is extremely frustrating because every time I want to update the songs on the iPod it is a 3 - 4 hour process, for something that should take 10 minutes.
    Is anyone else having these types of issues? I have a feeling it relates to having both products linked to the software, although it really shouldn't be a problem.

    I am having the same problem but my son's Ipod 3rd gen was stolen and it has been returned to us. Of course everything has been erased. I am having the same problems and have tried all of the same things but cannot do that reset to factory part because it isn't being recognized in the Itunes and it is not synching. Could someone please let us know what to do

  • ITunes freezes up when connect iPhone 6

    iTunes 11.4 freezes up in y MacBook Pro when connect iPhone 6. I need to synchronize my info. Tks

    I am running iTunes v12.1.1.14 on Windows 7 and I was experiencing the same problem. I found out that the issue started when uninstalling "iCloud". I do not want to use iCloud, but once I reinstalled it I could perfectly synchronize again. I hope this works out for some of you.

  • Everything freezes immediately when connecting iPod

    When I connect my ipod via the usb cable to my laptop basically everything freezes, including itunes and even the ipod updater. IMMEDIATELY, im talking exactly when i unplug it (even though it says do not disconnect) the computer unfreezes. I am not able to update any of my songs or the software or anything. Any suggestions?

    You need to uninstall the itunes and ipod update and go back to itunes 4 that came with your ipod. I was having the same problem and sent my 40G back to apple. I got a replacement and still was having the problem. After I performed the above procedure, the problems went away. Good Luck

  • ITunes gets frozen when connecting Ipod to Dell Laptop! Help!!!

    Whenever I connect my Ipod Nano to my Dell Laptop, the iTunes appears and gets frozen. When I disconnect it, the iTunes works normally. I connect the Ipod, the iTunes does not work. What do I do????

    Never mind...i actually found some advice thru the forums and fixed it up myself. My Ipod and ITunes are working now.

  • Itunes shuts down when connecting Ipod HELP

    Recently when I connect my Ipod to my Itunes a windows error message appears and shuts down itunes for me. The message reads that Itunes has encountered a problem and needs to shut down. I am unable to transfer any music, play songs off my ipod, or delete songs off my ipod. I have reinstalled Itunes several times. All of my songs are stored on my IPOD only so reseting would erase all of them. PLEASE HELP!!!

    Yes this used to happen to me also. Heres how to fix it. If this event just started happening after you have downloaded new music, I know how to fix it. Sort your iTunes by DATE ADDED. Then start clicking on the songs or videos, etc. in order from top down. When you click on a certain one(s) and iTunes shuts down, this is what you do:
    1. Find the file(s) on your computer by doing a computer search from the start menu.
    2. When you locate the file(s), click on it or them and send them into your recycle bin or trash for mac users.
    3. Then open iTunes.
    4. Locate the file(s).
    5. They should have a little ! next to them.
    6. When you click on them, iTunes won't shut down.
    7. Just right click on the file(s) and delete them again, this time from iTunes.
    8. Reset your iPod.
    9. Connect it.
    10. Your problem is solved!

  • Itunes freeze PC when connecting iPhone

    Hi all,
    When I start my PC from hibernation mode and open iTunes whenever I connect my Iphone to sync it, my laptop PC freezes and the only way to make it work is, hold the power button until it shuts down and then turn the laptop on.
    This starting to happen when I installed the settings carrier update for the iPhone(not firmware 2.2.1)
    Is anyone having the same problem????

    Hey,
    Try disconnecting the other USB devices from the PC. Make sure the iPhone is directly connected to a USB 2 port on the PC, using the cable that came with it.
    Also, try the tips in this article: http://support.apple.com/kb/TS1717
    Does iTunes have the same issue in another user account?
    -Jason

  • Windows freezes up when connecting iPod

    I've been using my iPod with no problem for months, but when I connected it last monday to put some new songs on there it froze up windows. First I thought it might be a problem with the new iTunes installation. Reinstalled it and got the exact same results.
    I then thought it might be a good idea to reset the iPod to factory settings and cleaning out all the music on there, but it froze up windows then to. When I disconnect the iPod its all back to normal again. To exclude my computer I installed the updater on my laptop, fresh XP SP2 install and got the same thing on there. Has this happened to anyone before or does anyone know a way to fix this problem?

    He wouldn’t be able to see it in windows explorer if that was the case my friend. If you can’t see the iPod go to Start > Run type compmgmt.msc OK that. Select Storage then Disk management. If you can see the Ipod change the drive letter path to a free letter. For example Z.
    This would be the first thing to check before trying other things especially if you have a few removable drive/media.

  • HT204302 iTunes error 0xE8000003 when connecting iPod touch

    when i connected my ipod, i tunes told me an error had occured so it can't connect. but it does show up in My Computer. what do i do?

    Have a look here...
    OxE   =   http://support.apple.com/kb/TS3221

  • ITunes freezing up when connecting iPad

    All of a sudden whenever I connect my iPad to my computer it wont sync.  iPhoto opens & recognizes the iPad & I can see the iPad as a device in iTunes but the spinning wheel of death just keeps on spinning. 
    Already tried restarting the ipad, letting the battery run out and connecting it to another computer... no change. This started before I could update to the most recent iOS, so I know it is not a new software issue. 
    help?

    If it occurs on another computer, it must be a problem with iPad and not with iTunes. You can try to restore by placing the iPad into recovery mode. This article explains the process.
    http://support.apple.com/kb/ht4097

  • ITunes freezes (SWOD) when iPOD is connected

    Since the latest iTunes upgrade to 7.7.1, iTunes freezes (SWOD) when my iPOD is connected. Worse, if one clicks on iTunes to make it the foreground application, the entire system becomes frozen and only powering off/on with the power button gets the system back (unless one forgets to disconnect the iPOD in which case one is back where one started).
    This is an old iPOD that uses a firewire connection. Given how difficult it is completely crash a *nix-based system, I suspect a hardware interrupt is behind this but who knows? Searching the knowledge base and forums hasn't lead to any solution.
    Any suggestions?
    Thanks!

    You mean a clean install or system restore of Windows Vista?
    Wow -- I hope it doesn't take something that extreme...
    (And again: gawd I hate Windows!)
    Any other suggestions of things to try/look at before resorting to that?
    Also -- when I go to Device Manager, there are no issues at all in the USB controllers list -- and in fact my iPod isn't listed there at all. However, in the "Portable Devices" section , my iPod is listed there -- and the properties says that the driver is provided by Microsoft (not Apple) and is dated 6/21/2006 and is version 6.0.6001.18000

  • ITunes freezes when connecting ipod

    I just recieved my 60GB iPod video and followed all the instructions exactly as supposed to...
    Step 1 was loading the software, which I had no problems with
    Step 2 was importing music to my computer, which I already had from my previous iPod
    Step 3 was connecting the iPod, this is where I ran into problems!
    I connected the iPod and the "Do not disconnect" screen was flashing on the iPod as it should, but iTunes did not open. When I tried to open iTunes myself it was frozen. I also tried to see if the iPod was appearing in windows explorer but that was frozen too. When I disconnected the iPod, iTunes and windows explorer began to run perfectly. I've spent 3 hours reseting, reloading and restarting everything but nothing has worked. Also, my laptop is very new so I'm pretty sure that's not the problem. If anyone knows what to do please let me know!

    I am having the same problem of my PC freezing when I plug in my 60 Gb iPod. My PC is runnging Windows XP professional. If the iPod is plugged in to the USB port everyting but the mouse freezes. As soon as I unplug the iPod the PC works perfectly. I uninstalled iTunes and the iPod utility and I still have the same freezing problem when the iPod is plugged in. I have a feeling their is a conflict with the iPod and my USB which is USB 1.1. When I plug the iPod into my Sony Vaio laptop everthing works perfectly. I am gooing to get a USB 2.0 and try that next. .
    George

  • I have updated to the latest version of iTunes (11.2.2.3). However, when I connect my iPod it shows in My Computer and iTunes opens automatically when the iPod is connected but the device doesn't show in iTunes.  Any ideas?

    I have updated to the latest version of iTunes (11.2.2.3). However, when I connect my iPod it shows in My Computer and iTunes opens automatically when the iPod is connected but the device doesn't show in iTunes.  Any ideas?  I am on Windows 8.1 and my iPod is a Classic

    Hi murr18140,
    Welcome to the Support Communities!  The article below will help you troubleshoot the issue you are having with your iPod classic not being recognized in iTunes for Windows:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363?viewlocale=en_US
    I hope this information helps ....
    - Judy

Maybe you are looking for

  • Create new tab in header using badi ME_GUI_PO_CUST for tcode ME21N

    Dear all, i have implemented method SUBSCRIBE in ME_GUI_PO_CUST to create new tab in ME21N, but the tab is not coming following is the code snips, please tell where is the error, or some setting needs to be done method IF_EX_ME_GUI_PO_CUST~SUBSCRIBE.

  • My i pod is not working it wont let me slide the lock think to unlock my i pod could i have so help please?

    hi my i pod touch is not working it will not let me slide the unlock thing to unlock my i pod could i please have some help? i think the screen  is brocken!

  • Problem in sending data to parallel port

    Hello, I can open a parallel port (LPT1) using java comm api i,e javax.comm. but problem in sending data to parallel port, I choose the appropriate port(LPT1), it is in bi-directional mode according to BIOS configuration. but according to the java pr

  • Photos: optimum file size for storage

    I have a few questions about what is the best way to manage my photos. Do I need to put my photos into my iTunes library before I can get them onto my ipod? There is no category called photos, so I'm not quite sure where they will go. Will the file s

  • Raid 5 Storage Lost

    I had 4 x 1TB drives in raid 5 and I had 3.2TB total storage on D:. C: contains W7 and CS5. I used about 0.5 TB before the system broke. The repair shop replace the MOBO and setup raid 5 again and I lost all my data. But now I have only 2.7TB total s