ITunes freezes when opening, please help

Whenever I try to open my iTunes it starts by "updating" my library, then it either freezes halfway through that or it freezes about 2 seconds later. I've tried to figure it out but nothing I try has been working. I've noticed that iTunes is trying to download a podcast right after but I don't know if that's the problem. I've tried to unsubscribe to the specific podcast but I can't get to it in time before it freezes. please help me
Dell Demension E310   Windows XP  

Hi
I had the same and I feel that your library is corrupted. Don’t be afraid since I could repair the iTunes following the next steps:
A) Recreate the library:
Follow these steps:
1. Quit iTunes.
2. Locate your iTunes folder.
 For Mac OS X the iTunes folder is stored in one of the following locations:
/Users/username/Music
 For Microsoft Windows XP and 2000 the iTunes folder is stored in
\Documents and Settings\username\My Documents\My Music\
 For Microsoft Windows Vista the iTunes folder is stored in
\Users\username\Music\
3. Open your iTunes folder.
4. Drag the iTunes Music Library.xml to the Desktop
5. Drag the following file from your iTunes folder to the Trash:
 Microsoft Windows: "iTunes Library.itl"
6. Open iTunes.
7. From the File menu, choose Import.
8. Navigate to the iTunes Music Library.xml file on the Desktop.
9. Windows users: Click Open.
Moreover you should follow the next steps.
1. Quit iTunes.
2. Move the iTunes Library file located at C:\Documents and Settings\username\My Documents\My Music\iTunes to your desktop
3. Open iTunes.
4. From the File menu, choose Add Folder to Library.
Navigate to the folder where your music is located. Typically this is
C:\Users\username\Music\iTunes\iTunes Music
In this way I could repair the iTunes 7.2. I apologize for my poor English and I hope to be of help for you.
Machicha

Similar Messages

  • NEED HELP ITUNES FREEZES WHEN OPENED PLEASE HELP

    hello all
    whenever i open itunes on my macbook, the loading pinwheel comes up and doesn't go away until i quit itunes or turn off my computer. my itunes will 'freeze' whenever i open it and will not let me play songs or anything. please help me!

    There are a lot of things that could cause this and your songs are rarely in jeopardy when the issue is iTunes so don't worry.
    If you could give us your iTunes version number, and the OS version you currently have those would help narrow a little.
    Did you install or change anything around the time that this started happening?
    Also explain exactly what happens. does the itunes window open than hangs with pinwheel or does the application bounce like it's going to open then hang instead.
    I would, even if just for good maintenance, repair permissions by going to your utilities folder opening Disc Utility selecting your HD from the left and clicking verify disc permissions. Also make a new user to test to see if iTunes opens there, if it works in a new user it's an issue with one of your user specific files, and there would be much less to sort through.
    More info will help a lot in figuring out whats going on.

  • ITunes freezes when I select help

    iTunes freezes when I select help. Does the same thing in safe mode. Reinstall didn't help. iTunes 10.7.0.21. Windows 7 64 bit
    When I choose iTunes help from the help menu, the help window opens with half of the window on screen and half of the window off of the screen to the right. The computer and other programs continue to work correctly but I need to use task manager to get iTunes to close.
    Any thoughts???
    Thanks, Tony

    SUCCESS!
    After trying all the suggestions above I googled the issue and came across a Windows specific forum where a guy had a software conflict with Malwarebytes.
    That got me thinking about a startup item conflict.
    Using Msconfig, I systemattically turned off half of my startup items, did a restart, tested the result.
    In my case, with half of the items off, I could access the itunes store.
    I turned on half of the remaining items, restarted, tested the result.
    I could still access the store.
    After about 8-10 cycles of this, I found that a startup item called OC_Guru_II was the culprit.
    It is an overclocking utility that came with my Gigabyte brand Nvidia video card.
    I'm confident that this was my problem. It is 100% repeatable.
    Hope that it helps some of you when the other stuff doesn't.
    All the best to everyone,
    Tony

  • Good day please help me, my iphone 5 wont turn on.  i have tried the hard reset . but that didnt even work. i plugged it in charger but still no response i connect it in itunes still.dont open. please help. i dont have the warranty anymore, i

    good day please help me, my iphone 5 wont turn on.  i have tried the hard reset . but that didnt even work. i plugged it in charger but still no response i connect it in itunes still.dont open. please help. i dont have the warranty anymore, so please help.me.

    Please make a Genius Appointment and take it in for service. By now it probably cannot be fixed, but you never know.

  • ITunes 9 crashes when opening, please help!

    After updating to the latest release of iTunes 9, it attempts to update library and when about 95% complete, just crashes. Crashes at the same exact point every single time. I tried reinstalling iTunes with a fresh download and that did not help. I get no error messages, it just force crashes every single time I try to start it. I can't even access anything in iTunes. Can someone please help me shed some light on this? Thanks!

    After updating to the latest release of iTunes 9, it attempts to update library and when about 95% complete, just crashes. Crashes at the same exact point every single time.
    That sounds most likely to be either a library file problem or a content file problem.
    There's advice on troubleshooting both those possibilities in the "User-specific troubleshooting" section of the following document:
    http://support.apple.com/kb/TS1421

  • Apps quit when opening PLEASE HELP!!

    about two days ago i tried to log onto microsoft messenger but when it was logging in it quit and came up with an error message and asking to send a report to apple. I also tried to log on to msn with aMSN and the same thing happened. then later that day when i open certian safari web pages (it normally happens on myspace) it just quits halfway through opening a page. now when ever i open safari it tries to load the homepage but quits.
    and now it seems lots of my programs are quitting randomly. Now it quits when opening iMovie, when i try and run iWeb it says it cant find my web pages i have made and then quits, dashboard widgets dont load and then hang, even the help viewer crashes as soon as i open it. and to top it all off the paim rest area of my macbook is starting to stain.
    anyway so far i have verified the macintosh HD and it says its fine. but when i try to verify or repair disk permissions it says there is an error and has to quit. I have also done the hardware test and its all fine.
    i have tried putting the install disk 1 that came with the macbook in and booting from it by pressing c. what is supposed to happen because it seems to be booting normaly. it just goes to the regular desktop and when i try to repair the disk with disk utility it wont let me so maybe it hasnt booted from the disk properly
    oh and the only thing i have done recently is downloading itunes 7 before i got these problems. and software update says im up to date. i tried uninstalling itunes but it still had those problems
    anyway please help me because my 90 days support runs out in 20 days. and i dont like using this windows computer
    macbook 1.83   Mac OS X (10.4.7)   512 ram 60gb

    Start with http://www.thexlab.com/faqs/multipleappsquit.html.

  • TS1717 iTunes will not open- please help!

    My iTunes will not open.  I've tried uninstalling and reinstalling, but the same message keeps showing up when I try to open iTunes.   The error reads "C\Windows\system32\dssenh.dll is either not designed to run on Windows or it contains an error.  Try installing the program again using the original installation media or contact your system administrator or the software vendor for support."  
    Please Help!!!

    Taken at face value, you're having trouble with one of the Windows OS dlls associated with Cryptographic Services.
    I'd first try the fixit from the following Microsoft document. (One of the things it does is reregister your copy of the dssenh.dll file.)
    You cannot install some updates or programs
    ... but if you still get the issue, I'd try an sfc /scannow as per the instructions in the following document:
    How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7

  • Itunes won't open please help!!!!!!

    Please help me I installed my itunes and quicktime, but the itunes wont open. I tried redownloading itunes and I even tried to install an older version of quicktime. It opened than but wouldn't work said that I needed to have the updated version. So I reinstalled the updated versions. And again it just gives me the hour glass symbol than nothing. I do not have norton and no other programs will interfer with it. Can someone please help me?

    Hey jimmymohawk,
    What is the exact error message? Is it saying that Quicktime needs to updated?
    This article: http://docs.info.apple.com/article.html?artnum=93976 should help you get iTunes installed sucessfully. Quicktime will have to be uninstalled, you may have to use the part of the article "Clean up iTunes installer files on the computer," then iTunes can be repaired or reinstalled.
    Jason

  • Music disappeared and ITunes freezes when re-syncing: Help!

    Yesterday all my music, photos, and video vanished from my 60 gb iPod. Naturally I tried to re-sync, but ITunes freezes every time I plug it in and immediately unfreezes when I unplug. The error message says "The iPod cannot be synced. The required folder could not be found." I went into preferences and checked "prevent devices from syncing automatically," but the iPod still tries to sync when I plug it in and it is impossible for me to adjust any settings within ITunes.
    I tried the check disk utility and my computer locks up. I also tried the manual reset, which seems to work, but I can't get the Disk Mode to work properly. When I looked in my iPod utilities, it said that iPod was almost full, yet I can't find any music or playlists despite being able to navigate the menus.
    Since the iPod itself seems to be working, I'd hate to have to junk this because some settings can't be adjusted. Any help would be GREATLY appreciated!

    Try putting the iPod into [Disk Mode|http://support.apple.com/kb/HT1363] to stop it from continuously rebooting. Then again attempt to restore the iPod through iTunes. Otherwise it may be the signs of a failing hard drive.
    I would maybe check up on taking advantage of the warranty you have on it.
    B-rock

  • The iphoto and itunes will not open please help

    on my Mac G5 the iphoto and itunes will not open can anyone help

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    Then, hold the Option key down when trying to open iPhoto, does it ask where it's Library is? Or what exactly happens?

  • My Itunes will not open, please help

    I am running version 10.7.0.21 - since upgrade itunes will not open.  I have visited the support site and done many things to get this working - taken hours of my time I do not have, including setting up a new user and same result.
    My PC is running Windows 7.  I need my itunes as I have 4 ipods and 3 iphones - I need to back up a phone as I have just upgraded,
    One error I seem to have caught is as follows:
    Problem Event Name     BEX
    Application     itunes.exe
    Version     10.7.0.21
    timestamp     504d85d9
    Fault Module Name Quicktime.qts_unloaded
    Fault Module Version     0.0.0.0.
    If someone has some suggestions, it would be much appreciated.

    You're posting in the wrong area. This is the Mac OS X Lion area.
    Post in the iTunes area.

  • ITunes will not open, please help

    the instruction at "0x0079f791" referenced memory at "0x7ffe0304." the memory could not be "written"
    This is the error received by my friend when she tries to start her iTunes, and I was wondering if anyone else had seen this; It sounds more like a memory allocation error than an error with iTunes, but I figure it's worth a shot... any idea what's going on there and how to fix it?
    Thanks!

    Have a look at this page and see if anything there helps: iTunes for Windows: Troubleshooting unexpected quits, freezes, or launch failures

  • ITunes fails to open: please help

    Please could someone help me?
    Up until yesterday, iTunes was working fine. But then, after I had downloaded some new songs, first it kept saying that my ipod had been removed from the usb port without being ejected (but it was actually still connected to the computer at all times, and I had just left it alone). Then it recommended that I restore my ipod to factory settings, which I did.
    Then iTunes quit, and wouldn't open: the icon just bounces once and then returns to normal, with no arrow under it. This happens regardless of whether I left-click or right-click-and-select-open. I ejected and re-connected the ipod three times, restarted the computer twice, and finally tried to download the newest version of iTunes twice to fix it - it seemed to download successfully, but iTunes still wouldn't open. I then retried restarting it and disconnecting the ipod, with no success. I then tried creating another user account on the mac and starting up iTunes - still no luck. I've checked all the settings I can think of and still can't find anything. No files which need iTunes to function can be opened - I can access no aspect of itunes. (On the plus side, my music files are still stored on my computer, although I still can't access them.)
    I have also had my ipod checked and there is no problem with it.
    If anyone has a solution, or can think of anything I've missed that just might work, please say: I'm really stuck here.

    It is fixed! To inform anyone else with the same problem:
    I contacted apple and, according to them, downloading the latest version of iTunes fixed the problem with iTunes but created a compatibility issue - to fix the whole thing, I also had to download a system update to at least version 10.4.11. I did this and it works fine now.

  • Programs keep shutting down when opening - please help

    Hi,
    My imac keeps shutting down my programs when I'm using them. For example I can change my screensaver image to images from a chosen, when I try the program shuts down, same as safari and mac the ripper. Some of my other programs do not even open for me, like pages and keynote, they just do nothing. Pleas help its getting really annoying and I've tried to find out whats the problem but nothing I do is helping.
    Regards
    Alladnek2
    imac g5 1.9ghz   Mac OS X (10.4.6)  

    Welcome to the discussions!
    Have you tried creating a new user account and launching the apps there? If they work under the new account, then it is possible that you have a corrupted pref file.
    I had this happen on my eMac, but it was when I was a newer Mac user and didn't know much. I ended up reinstalling to OS - which corrected it - but that is a bit drastic.
    Let's not do that, but try some other troubleshooting first.

  • PP CS6 crashes when opening - Please help!

    When I attempt to open PP CS6 it displays the initial launch screen and then says "Adobe Premiere Pro has stopped working."  Before posting this question I tried:
    1) uninstalling and reinstalling PP CS6
    2) uninstalling and reinstalling Creative Cloud manager
    3) running in compatibllity mode
    4) launching PP CS6 while pressing shift and alt keys (to reset preferences)
    5) updating video drivers
    My other Adobe apps launch and operate perfectly.  Any advice is appreciated!

    What are the specs on your system?
    If you're on Windows, please update the driver for your processor. That step has resolved a crash-on-launch for several customers.
    Do you have any codec packs or third-party effects or transitions installed?
    In the bottom left corner of the "Premiere Pro has stopped working" dialog, there should be a link that reads "View problem details." Please click that and paste just the top few lines here (see the example here: http://forums.adobe.com/thread/1261230?tstart=0)
    These threads might have some other suggestions:
    http://forums.adobe.com/message/5533149?tstart=0#5533149
    http://forums.adobe.com/message/5484148#5484148

Maybe you are looking for

  • Editing Text in SWF file with Flash

    Hio All, I am a flash newbie. I have been asked to edit an existing site and am coming up goose eggs. What I want to do is edit the text in a swf movie. The movie opens up fine in flash, I can add and delete text, but I cannot save the darn thing. Th

  • From AS/400 to SAP

    Dear all, I've got to integrate on a daily basis a file which is intially generated by an AS/400 system into SAP 5.0. Incoming data format RDB*? Data types are FI Volume not so big Frequency daily Would the batch input be the best way to do so? Regar

  • USING SEQUENCE IN PACKAGE SPEC

    I Want to Use Sequence.NEXTVAL & Sequence.CURRVAL throughout the package. How can i declare the global sequence variable and make them available for all the stored procedures inside the package ? Any help highly appreciated.. Thank you all in advance

  • Exception message 62 - Master Data Inconsistant

    I'm getting the referenced exception message when generating an MRP run with scheduling value of "lead time scheduling and capacity planning".  I've done consistency checks on all master records - routings, work centers, etc - and all have come back

  • Authorizations  required for applying support packs

    What authorizations do you require for applying support packs?