Itunes give me error 2 when installing and starting it up

after i install itunes i get a error 2 also i uninstall and get the smae error

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Similar Messages

Iphone has a new battery and front camera flex cable. Wont turn on and Itunes gives me error 4014 when i try to restore

So my iphone 5 was having very bad battery problems and apple said they charged $80 to which i was astonished by because my warrenty ended 2 weeks eailer. I thought maybe they would be generous and help me out but no so i took it upon myself to get a new battery and install it myself. I did that and it turns out i need a new front camera flex ribbon so i also bought that and installed it myself. Whe i was donre installing it my phone flashed the apple logo and went black front there. I tried connecting to itunes and it gives me error 4014. Will apple still fix my phone even though i opened it?(Im not under the warrenty anymore).

It is unfortunate that you chose to open the device. Apple will not touch it now. Out of Warranty replacement is no longer an option.
Buy a new device.

ITunes gives unknown error (-50) when syncing songs with iPhone

I recently ripped a few mp3 files to my library and started up iTunes to sync them with my iPhone. If I recall correctly, this prompted me to upgrade to 9.2 of iTunes.
Everything synced perfectly - apps, photos, excpet for the new songs I had ripped - I got the unknown error (-50) syncing the new songs. This puzzled me as I followed the exact same process as I had when ripping all the other songs in the library.
I then removed an existing song from my iPhone, and tried the sync again, and now THAT song also failed to sync. Thus - it sure does not look like a problem with my mp3 files, but some sort of problem with iTunes.
I found this article which was very similar, but ended up being only specific songs:
http://support.apple.com/kb/ts1539
I followed all the steps there, but have yet to achieve success. I have also followed every iTunes upgrade since I started - I am currently at 9.2.1.5.
I also have an iPod Touch, and it experiences the same symptoms, thus once again pointing to iTunes not the device. I even went through the process of restoring my Touch to factory settings, and that did not help. I even upgraded my Touch to 4.0, still no change. With this restore to factory settings, all the music on my Touch was wiped out, and unfortunately now NONE of my songs sync - which includes the almost 300 other songs that were synced perfectly fine before I did the restore.
After the restore - photos, videos, etc. all synced fine - it is just music that has this problem. I do not suspect my USB connection as a result (some of my videos are very large) I have over 10GB free on my 1 GB Touch, and much more than that on my 32 GB iPhone.
I am really stuck here - everything else is working but I can not get any new songs, and I am afraid of doing too much more in case I lose the songs I already have.
Thanks in advance for any suggestions!
Brent.

I just wanted to add that I have updated to iTunes 10, and this problem still exists.

Battery backup is non and gives an error-601 when the system start

i have a laptop which model no. is hp mini 210. i was purchased it before one year but right now there is a problem accour that is as the battery is not giving backup and a error occurs as error-601 please suggest me what should i do.
Thank you

Hey,
Here are the steps that should help:
1. Close all applications.
2. Go into the Finder>Home>Library>Preferences
3. Delete 'com.apple.iDVD.plist' and 'com.apple.iTunes.plist'
4. Restart Immediatley.
This should work. Cheers, Ricky.

HT1926 I am getting error 7 (windows error 126) when installing latest version of itunes. I have tried uninstalling and reinstalling and keep getting the error. What is wrong?

I am getting error 7 - windwos error 126 when installing the latest version of itunes. I tried uninstalling and resinstalling several times. Everytime it tries to start up itunes after install it gives some error about connecting a mobile device and then it gives the error. Help.

Hello agurpi,
The following article provides steps that can help resolve this error.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Allen

TS3694 When i plug in my Iphone to restore it, itunes gives me error code 2009. All i have on my iPhone display is the itunes logo and the usb cable.

When i plug in my iPhone to itunes so i could restore because i found it, itunes gives me error code 2009. on my iPhone, all that is displayed on the screen is the itunes logo and a usb cable saying to connect it to itunes. Help please?

Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.

HT4097 my ipad 3 is stuck in the "connect to itunes" mode. whether i restart or try to restore. when i try to restore itunes gives an error message saying an unknown error occurred (-1). any help.

my ipad 3 is stuck in the "connect to itunes" mode. whether i restart or try to restore. when i try to restore itunes gives an error message saying an unknown error occurred (-1). any help.

That error sometimes indicates a hardware problem. See 2nd link below.
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

The new iTUNE GIVE ME ERROR R6034 AND ERROR 7 (WINDOWS EXE ERROR 1114)

the new iTUNE give me error c:\program files(x86) itunes\itunes.exe r6034, and Error 7(windows error 1114)

Hello ROMANCERO,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/ts3074
Best of luck,
Mario

I get an Error 7 (Windows error 126) when installing itunes

I get an Error 7 (Windows error 126) when installing itunes to my laptop. Got this after last upgrade attempt. Uninstalled and tried reinstalling, but get same message

If that particular Error 7 message is preceeded by a different error message titled "iTunes.exe - Entry Point Not Found", try the following user tip:
iTunes for Windows 11.1.4.62: "The procedure entry point: ?videoTracks@QTMovie@ [...] could not be located ..." error messages when launching iTunes

Error message when installing quicktime/itunes

PLease help! I continue to get this error message when trying to install quicktime HKEY_LOCAL-MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Quicktim e.
What should I do? In lamens terms please, not very computer literate.

an error message appears saying that a program required for the installation is missing
In the course of your troubleshooting to date, have you tried the following user tip with that one?
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

When synchronization fails to create a backup, iTunes gives an error.

When synchronization fails to create a backup, iTunes gives an error.
iPhone 4, OS 5, Windows XP S3, iTunes 10. ITunes was moving a few times. Please help me.

When synchronization fails to create a backup, iTunes gives an error.
iPhone 4, OS 5, Windows XP S3, iTunes 10. ITunes was moving a few times. Please help me.

Problems installing and starting on Windows 7 64bit. error message - The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes.

Hi I'm having problems installing and starting itunes program on Windows 7 64bit. After install the following error message is flagged - The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes. Would really appreciate any pointers!

Never mind sorted it out lol. Somebody did a system restore of a week or so. I had done the update during that time and it was lost. Just redownloaded itunes from the internet and its working fine now.

I get an error message when installing itunes with windows 8, error message is error occured while attempting to create the directory C:\program file(x86)\common files\apple\mobile device support\sync services\schemas\outlook.syncschema

I keep getting an error message when installing iTunes with windows 8

See the second box in Troubleshooting issues with iTunes for Windows updates.
tt2

HT1151 I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install

I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install okay

Hello Valerie Anderson,
I'm Harry from Norton Support team. Please check the information provided in a similar thread here:
https://discussions.apple.com/message/21854775#21854775
Let me know if this helps.
Thanks!
Harry

I am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

i am trying to generate purchase order and i create a BAPI also which is active.
But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

Hi,
Yeah i tried my Z_BAPI in R3 and then giving some ERROR.
This is my CODE-
FUNCTION ZBAPIPOTV2.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(POHD) TYPE ZPOHD OPTIONAL
*"     VALUE(POITEM) TYPE ZPOITEM OPTIONAL
*" TABLES
*"      RETURN STRUCTURE BAPIRET1 OPTIONAL
data: ls_pohd type bapimepoheader,
         ls_pohdx TYPE bapimepoheaderx,
         lt_poit TYPE TABLE OF bapimepoitem,
         lt_poitx TYPE TABLE OF bapimepoitemx,
         ls_poit TYPE bapimepoitem,
         ls_poitx TYPE bapimepoitemx.
   MOVE-CORRESPONDING pohd to ls_pohd.
   MOVE-CORRESPONDING poitem to ls_poit.
   ls_pohdx-comp_code = 'x'.
   ls_pohdx-doc_type = 'x'.
   ls_pohdx-vendor = 'x'.
   ls_pohdx-purch_org = 'x'.
   ls_pohdx-pur_group = 'x'.
   ls_poit-po_item = '00010'.
   APPEND ls_poit to lt_poit.
   ls_poitx-po_item = '00010'.
   ls_poitx-po_itemx = 'x'.
   ls_poitx-material = 'x'.
   ls_poitx-plant = 'x'.
   ls_poitx-quantity = 'x'.
   APPEND ls_poitx to lt_poitx.
CALL FUNCTION 'BAPI_PO_CREATE1'
   EXPORTING
     POHEADER                     = ls_pohd
    POHEADERX                    = ls_pohdx
*   POADDRVENDOR                 =
*   TESTRUN                      =
*   MEMORY_UNCOMPLETE            =
*   MEMORY_COMPLETE              =
*   POEXPIMPHEADER               =
*   POEXPIMPHEADERX              =
*   VERSIONS                     =
*   NO_MESSAGING                 =
*   NO_MESSAGE_REQ               =
*   NO_AUTHORITY                 =
*   NO_PRICE_FROM_PO             =
*   PARK_COMPLETE                =
*   PARK_UNCOMPLETE              =
* IMPORTING
*   EXPPURCHASEORDER             =
*   EXPHEADER                    =
*   EXPPOEXPIMPHEADER            =
TABLES
    RETURN                       = return
    POITEM                       = lt_poit
    POITEMX                      = lt_poitx
*   POADDRDELIVERY               =
*   POSCHEDULE                   =
*   POSCHEDULEX                  =
*   POACCOUNT                    =
*   POACCOUNTPROFITSEGMENT       =
*   POACCOUNTX                   =
*   POCONDHEADER                 =
*   POCONDHEADERX                =
*   POCOND                       =
*   POCONDX                      =
*   POLIMITS                     =
*   POCONTRACTLIMITS             =
*   POSERVICES                   =
*   POSRVACCESSVALUES            =
*   POSERVICESTEXT               =
*   EXTENSIONIN                  =
*   EXTENSIONOUT                 =
*   POEXPIMPITEM                 =
*   POEXPIMPITEMX                =
*   POTEXTHEADER                 =
*   POTEXTITEM                   =
*   ALLVERSIONS                  =
*   POPARTNER                    =
*   POCOMPONENTS                 =
*   POCOMPONENTSX                =
*   POSHIPPING                   =
*   POSHIPPINGX                  =
*   POSHIPPINGEXP                =
*   SERIALNUMBER                 =
*   SERIALNUMBERX                =
*   INVPLANHEADER                =
*   INVPLANHEADERX               =
*   INVPLANITEM                  =
*   INVPLANITEMX                 =
ENDFUNCTION.
i am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

Itunes give me error 2 when installing and starting it up

Similar Messages

Maybe you are looking for