ITunes gives code 42110 and 3014 and i cannot solve the problem

iTunes gives code 42110 and 3014 and i cannot solve the problem. iphone out of order.

Error 3014 means the following:
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.
Error 3014 may indicate that you need to free up more disk space on the computer before trying to restore again.
Here's the article containing the above: http://support.apple.com/kb/TS3694

Similar Messages

Adobe Media Encoder only using single core of CPU (core parking has already been disabled and did not solve the problem)

I only edit videos every few months and the last time I edited a video was around 6-9 months ago. At that time, I noticed AME was only using a single core of the CPU and contacted Adobe who instructed me to disable core parking, which worked. After disabling core parking AME used 100% of all 12 logical cores to process the video and all was good. Then last week, I decided to edit another video and noticed AME was very slow and checked and it was again only using a single core to process the video, but core parking is still turned off. By slow I mean that a 10 minute video with the lens distortion correction preset and one video transition effect is estimated to take nearly 3 hours to complete. For comparison, the GoPro software processed the same clip with the same effects in 20 minutes. Also, through troubleshooting with Adobe over the last few days, I have also tried downloading previous versions of the software but the prior versions have the same issue.
The video I'm trying to edit was shot on a GoPro Hero 4 Black with 1080p Wide at 60 frames per second. The default video format for GoPro is .mp4. The output settings I'm using when I export from Premiere Pro to AME are H.264 with the YouTube 1080p HD.
My system:
ASUSSabertooth X79
Intel core i7 4930k (6 physical cores, 12 logical cores)
16GB DDR3 Quad channel RAM
Samsung 830 SSD 128GB
NVIDIA GeForce GTX 460 (not CUDA compatible, I know)
Please ask if you need any additional information to help solve this problem.

This has been driving me CRAZY... so going over the message boards from 2 to 5 am this morning I found the best explanation I have seen. The problem is that Adobe Creative Cloud is NOT "Processor Group Aware". Windows parses any more than 36 cores into "Processor Groups" and while the Pro version of Windows 7 & 8 can handle 256 threads they have to spread them across multiple processor groups.
Simple Version: AREA | How many cores does 3ds Max support?
Microsoft's Explanation: Processor Groups (Windows)
Clearly, this is an Adobe Problem... If any engineers are reading this PLEASE review the below and incorporate it into your next build of Creative Cloud!!!
https://msdn.microsoft.com/en-us/library/windows/hardware/dn653313%28v=vs.85%29.aspx
Again, I bought a VERY expensive machine based on your white paper that recommended Dual Xeon Workstations. Please, Please Give us the product you PROMISED!!!
Michael

Yosemite is very slow when i switch on. can someone say why and i can solve the problem??

yosemite is very slow when i switch on. ten or more seconds. why? how i can solve this problem??
Thanks riccardo.italy.

The following items or conditions can slow a Mac. Please see if any of them apply:
1) Are you running any anti-virus/internet security applications?
2) Are you running any "cleaning/tune-up/optimizations" applications?
3) Any peer-to-peer or torrent downloading software?
4) Any third-party disk backup software that came bundled with an external hard drive?
5) Any online backup scheme other than iCloud or DropBox (Carbonite; GoogleDrive; MS One Drive)?
6) Did your financial institution ask you to install Trusteer EndPoint Protection (also known as Trusteer Rapport)?
If you can answer "yes" to any of those questions, you have some unneeded and performance-robbing software installed.

TS4147 This article creates a loop and doesn't solve the problem!!!

I have unexpected duplicates in my contacts that happens when I sync with Outlook 2010 and icloud. This article refers me to another article which says that if that doesn't resolve the problem, which is doesn't click here...which brings me back to this article. Setting up icloud has made a complete mess of my OUtlook contacts right when I'm trying to do my Christmas Card mailing...
I'm a fairly competent user and have checked and double checked all my settings but the duplications keep happening and proliferating!!!

Restore the backup you made prior to Changing Outlooks accounts from local to iCloud.

Unwanted signals going through RS-232 port when Analog I/O channels are being used. Why and how to solve the problem?

My application involves operating a pH meter via RS-232 protocol. Other hardware are operated using an E-series DAQ board whereby waveforms are software-generated and sent to the relevant hardware using an Analog Output channel. Data acquisition is performed utilising Analog Input channels of the DAQ card that have been configured in a Referenced Single-Ended mode. When the Analog I/O channels are active erroneous readings are observed on the pH meter if the RS-232 cable is connected between the pH meter and the control PC. No problem is observed if the RS-232 cable is disconnected. What could be the problem and any suggestions on how to solve this.

Comments to your questions:
Built-in = Originally supplied on the PC's motherboard
1)I use built-in RS-232 interface
2)I use built-in Bus type
3)The RS-232 cable is shield connected
4) I'm not sure on how to check if the RS-232's digital ground signal is connected. I simply connected the RS-232 cable from the pH meter to the serial port. The serial communication works fine, with no disturbance to the pH meter if i don't initiate data acquisition.

I have a problem with itunes opening. I have downloaded the new version and it ask to repair or remove itunes I chose to repair. This has not solved the problem. If I remove the program how do I get my songs and playlist back?

If I remove itunes from the computer, how do I get my songs and playlist back?

Do you get an error message when you try to launch iTunes? If so, what does it say? (Precise text, please.)

What cause my phone to be stuck at the apple logo and how to solve the problem

help me

If its on that logo, you can try restoring it via recovery mode
1.Turn off the iPhone, if you can't turn it off due to a lack of response to input, just let the battery drain completly
2. Turn on iTunes on your COMPUTER, dont go to apple.com/itunes, actually open the program.
3. First holding down the home button on the front of the phone, plug the phone into the computer
4. This will do two things. On the phone it should show a usb cable pointing to the iTunes logo, youll know you did it right if you see that. On the computer it will show in itunes that it has detected a device in recovery mode, and that it needs to be restored. Once you see that, hit ok on that, and hit the restore button that should be available on the screen. Once this is done your device should work. If it doesnt take down the error number it gives you and call apple.
Keep in mind, that doing this means losing all your data, before you do this, at least try to sync with iTunes and make a backup, though if its frozen it very well may not.
Hope this helps, cheers

When I power up my system. I get the following error message: Video controoller [VGA Compatible] The system won't them find the driver and I cannot reslove the problem or remove it. Any help to do so would be most welcome

This is not a FireFox problem as it starts before I open any browser. As the system powers up. The hardware is yellowed, but if I delete it. It just reloads it and the same error comes back, next time the system power up as before.
The system is asking for a hardware disk that I do not have to give it. Any help would be most welcome.

You have to enter the Apple ID and password. You are running into the Activation Lock
iCloud: Find My iPhone Activation Lock in iOS 7
Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.

Can't install adobe flash and how I solved the problem

This will sound crazy, but I was desperate. And then it worked, on the Air and on my Pseudo-Husband's new MacBook Pro.
I changed the download folder to Applications. (Just for this one download. I've since changed it back to Desktop which works best for me.)
In Applications, it installed fully, and works fine. I have no idea why, as I'm not a trained person on these things. But it seemed like a good idea to try. (Macs for 20 years.)
Try it! I have no idea if it will work for you, but it did for us. Goo

When the Flash installer reports that Safari and System Preferences need to be closed to continue it gives you the option of closing them from the panel.
If you select the action to close them what happens?

TS4169 I have Final Cut X 10.1.1 and have Mavericks and I cannot fix the problem

Please give me an update or a soluton for how to fix the "restoring window layout" freeze at final cut x boot.. There is nothing to show how to fix problem with mavericks... I have a brand new macbook pro and FCX has been working up until a few days ago. Please help I am loosing money

Try this ...... corrupt preferences can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
http://www.digitalrebellion.com/prefman/
Shut down FCP X, open PreferenceManager and in the window that appears:-
1. Ensure that only FCP X is selected.
2. Click Trash
The job is done instantly and you can re-open FCP X.

Cannot solve the problem of not being able copy and paste in firefox. I have tried removing appInit.dll, new profiles, etc. with no luck. What is the problem?

I have not been able to copy and paste in firefox for the last two months. My research on the topic has led me to try the disabling all plugins, creating a new profile in safe startup, I removed appInit_dlls from my registry, could not find pushowxx adware, installed lastest version and updates of firefox, etc. All to no avail.

Hi Gary,
I have seen this issue occur with users who have this registry setting missing or have improper permissions.
When you double click the attachment to launch the pdf it is saved and opened from the temporary folder unless saved specifically to a location.
If you dont have the below mentioned registry key or improper permissions then attachments fail to open.
Please heck if the following reg key exists:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
or
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\Security
Value Name: OutlookSecureTempFolder
If the value exists, and if the value contains a valid path, Outlook 2010 uses that location for its temporary files.
If the registry value does not exist, or if the value points to an invalid location, Outlook 2010, Outlook 2007, or Outlook 2003 creates a new subdirectory under the Temporary Internet Files directory and then puts the temporary file in the new subdirectory. The name of the new subdirectory is unknown and is randomly generated, depending on your version of Outlook.
Please check the following key:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
Note the location for: OutlookSecureTempFolder key
Check if the same folder exists in the following location and if not create a corresponding folder in the location on C:\Users\<User account name>\Appdata\Local\Software\Microsoft\Windows\......
Regards,
Rave

The tab button is not operating, it is visually there, just doesn't work. tried rebooting and help but cannot solve the problem. also tried control+T and nothing works, reset to default and still doesn't work.

Tab button is not operating. Tried rebooting, resetting options to default, tried with mouse and with control+T and nothing seems to activate it. It was working properly until an hour ago. Now the + (tab) button is there but it is idle. How do I fix this issue?

This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
Your system details show that toolbar in the user agent as AskTbFWV5/3.12.2.16749
See:
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I am sick and tired of Firefox crashing from Adobe Flash player. All support statements say to reinstall and that doesnt solve the problem!

I am sick and tired of your Firefox not supporting Adobe Flash player. Windows explorer no problem it works fine. All of your support statements tell me to reinstall and I've tried that more than once and nothing improves! It is slowing up my computer, and I have a windows folder with 4.8Mb of auto generated crash messages!

If you have problems with current Shockwave Flash plugin versions then check this:
* see if there are updates for your graphics drive drivers
'''https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration'''
* disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
'''https://forums.adobe.com/message/4468493#TemporaryWorkaround'''
* disable hardware acceleration in the Flash plugin
'''https://forums.adobe.com/thread/891337'''
See also:
* '''http://kb.mozillazine.org/Flash#Troubleshooting'''

I tried renting a movie, but every time I try to play it, it gives me an iTunes error code -42110. What is the deal?

I tried renting a movie, but every time I try to play it, it gives me an iTunes error code -42110. What is the deal?
- Cratin

Something like this happened to me, where something went wrong on Apple's end and a movie I rented wouldn't play. I contacted Apple over the phone and they gave me back my money and fixed the problem for future use.

I bought a itune card from walmart and when i enter the code it say it had already redeemed

i bought a itune card from walmart and when i enter the code it say it had already being redeemed

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

ITunes gives code 42110 and 3014 and i cannot solve the problem

Similar Messages

Maybe you are looking for