ITunes had an error while trying to update my iPhone 6+ and now the phone is bricked (and iTunes is not detecting it)
So I tried Installing iOS 8.3 onto my iPhone 6+, updated iTunes to the latest version, 12.1.2, downloaded the update for the phone, connected my phone - it detected fine like it always does. When I tried installing, it went to about halfway or so and then iTunes said there was a problem updating the phone.
The phone icon disappeared from iTunes and when I checked the phone it was giving the blank screen. I tried turning it off and on again... It showed the apple logo, and then the connect to itunes icon, but iTunes is not detecting it.
Even if I take it out and put it back in again, even with the hard reset holding the home and power buttons. I'm running Windows 8.1. So far I've tried the hard reset, cleaning the connector pins, switching to a a different USB port, reinstalling iTunes, checking to see if the Apple Mobile Device software is up to date, even using a previous restore point in windows.
The device makes a noise when it gets plugged in, indicating that it's being detected by the computer, but iTunes... nothing. And my phone is stuck on showing the connect to iTunes picture and it's bricked and unusable and I'm wondering why I even bothered with this stupid update.
Most of the recent updates showed the connect to iTunes screen for a short time. But if the update was done with the iOS device connected to the computer running iTunes, the Connect to iTunes screen appeared only briefly then the update completed. If your iPhone didn't complete the update you will have to put the iPhone into Recovery Mode. Follow the steps very carefully in the link below. You might have to try several times to get your phone into Recovery Mode.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Similar Messages
-
I tried to down load photos to my computer, but accedently click update setting as well. Now the phone is frosen and the computer shows that I have to restore the phone, in this case I will loss all the photos. right? what should I do?
Follow this very helpful user tip by wjosten:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive -
i tried to update my iphone 4. Its now stuck on connect to itunes logo screen. itunes on my computer will not even detect my phone. Why is this happening and will it restore on its own? if not how can i restore it myself?
UNABLE TO RESTORE (connect to iTunes with cable logo)
If you are trying to restore and you device shows an image of a USB cable and connect to iTunes then carefully follow the steps in this article. You may need to do is several times http://support.apple.com/kb/ht1808 -
hi just bought an iphone 5s from a guy at the market ! the phone was dead got home charged it and had a lock gone back the guy was gone!i restored the phone and got phone was lost and erased and no other detailes what else can i do the guy said its his phone and its on verizon now but its neverlocked! how can i get this back and working?
You can't get the phone working without the correct password, because the previous owner activated Find My iPhone and Activation Lock. In order to unlock the phone you would have to ocntact the previos owner of the phone. Unfortunately, this is the only way to get it working again.
-
I know now that i have to plug in my iphone to my computer and go to itunes but then what do i do, because i dont know how to sign in?
There is nothing to do because you need to plug it into a computer and connect to iTunes. If you don't have a computer then there is nothing you can do.
-
I WAS INSTALLING THE IOS6 UPDATE ON MY I PHONE 4S AND THE SCREN TURNED BLACK NOW WE CANNOT GET IT TO COME ON OR DO ANYTHING ANY IDEA WHAT I NEED TO DO
you may put your device in dfu mode then connect it to itune ,after that there may be a message come up and say you have to restore your device. Restore your device to 5.1.1 then when you finish update it from itune not from your device directly.
-
hey guys my dad was updating his phone and it was taking too long so he pulled it out cos he had to leave and the screen stayed in the update screen and now the phone is frozen and wont budge. it wont hook up to the compter either. i have pulled the sim out and nothing.. what do i do????
Read this
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support -
I get a message that my network connection has timed out while trying to update my iPhone on iTunes. Has anyone else had that problem and if so what solutions have you found? I was told to turn off my firewall and/or virus protection while updating but am nervous about doing that for obvious reasons. I'm also disgusted with Apple not providing free tech support.
See this article about the ports that have to be open during the update process. iTunes has to contact Apple during the download. iTunes for Windows: Troubleshooting security software issues
-
Error while trying to update to ios 5
I keep getting an error while trying to update to iOS 5. I update iTunes this morning to the lastest version so I know that isn't the problem. I have tried restarting both my computer and my phone, but contine getting "The iPhone could not be restore. An unknow error occurred (3194)." PLease help! Thanks in advance
I am also getting the error 43 when the update tries to back the phone up. Im using the latest version of itunes. This is on an iphone4, I am in the UK.
I tried deleting all of the historical backups to see if a fresh backup folder helps. It did not.
Ive tried running iTunes in 'administrator' mode on my Windows 7 machine. This made no difference.
Ive tried putting the phone in airplane mode. No difference.
I tried getting it into restore mode just to see if it worked on a iphone4. However it did not seem to want to do it.
Im not not too sure about proceeding with this update as I done want to loose any of the apps I have. (or 3 my 3 stars in every angry birds level on all 3 versions of the game!!)
Please someone, HELP !! !! -
Getting the error "Error while trying to update record" when I try to force complete a plan in DAC
Hello Everyone ,
I am using OBIA 7.9.3.7 . One of my execution plan has finished executing all the tasks but it is still in running mode . When I try to force complete it , it gives the error " Error while trying to update record" . Upon checking the log file , I found the below errors :
MESSAGE:::ORA-04092: cannot COMMIT in a trigger
ORA-06512: at "DAC_CUSTSCM.ETL_FAIL_NOTOFICATION", line 9
ORA-04088: error during execution of trigger 'DAC_CUSTSCM.ETL_FAIL_NOTOFICATION'
EXCEPTION CLASS::: java.sql.SQLSyntaxErrorException
The Plan is in running state for past couple of days . I tried to re-start the DAC services , but again it gave the same error . Kindly suggest .
Regards
SatyendraJust to correct , the version of obia is 7.9.6.3
-
hi, I was trying to update my iPhone 3gS but when I turn it on again iTunes send me a message that says error 3194 occurs, please help me!!
If the screen shows a plug going to itunes, then you have no choice, It's in recovery mode. You'll be given the chance to restore from a backup either from itunes or icloud.
I assume when you got the message to update (was this for the ios or update some apps?), that was before the device when dead. At any rate, doing a restore does not change the ios. -
while trying to update my iphone 4 last night, it froze with the itunes logo and a plug underneath. Can I fix this? How?
See: http://support.apple.com/kb/HT1808
-
Hello Mans and Womans! I live the problem to my iphone.While I was updating firmware update(my iphone is iphone 3G iOS 4.1.2) 4.2, the iphone gave an error(1015:error type).And now, the phone be rescue mode.I tried a lot of method, but ı didnt succesful it.Please help mee!!
You can try putting the iPhone into DFU mode and see if that will let you restore and remove the jailbreak:
http://osxdaily.com/2010/06/24/iphone-dfu-mode-explained-and-how-to-enter-dfu-mo de-on-your-iphone/
Some jailbreaks cannot be removed and in some cases will permanently disable your iPhone. If that happens to you, then you will have to buy a new iPhone; Apple will provide no support, warranty or out-of-warranty, for a jailbroken iPhone.
You're on your own from here. We can provide no further help with a jailbroken iPhone in these forums.
Good luck. -
im facing problem while trying to update my iphone 4 from version 4.3.1 to iOS 5. While processing the downloaded 774mb file, it comes with the statement that the network connection timed out. why???
i have been dealing with this same issue, tried to turn off firewall and even turn of antivirud but still it gave me the same error.
-
I'm trying to update my daughter's Ipad2 to the new IOS 8 and it's got stuck on the connect to ITunes display. We don't have a computer to connect it to and it's never been connected to one. How do I get past this?
You can try a soft-reset of pressing and holding both the home and sleep buttons for 10 to 15 seconds so that it reboots, but you are likely to get the same screen. If it does then it will need to be connected to a computer's iTunes so that it can be reset back to factory defaults - do you have a friend with a computer with iTunes installed on it, or is there an Apple store nearby that you could try going to (if there is then preferably make a Genius Bar appointment at it, or don't go at a busy time) ?
Has she been backing up to the cloud ? If she has then she should be able to restore to that. If not then what she can redownload for free from the stores will show in the Purchased tabs in the store apps.
Maybe you are looking for
-
Dont want to show overall result in my report
Hi Probably quite simple, i just dont fint how to " NOT show overall result in my query"
-
Should ID for family sharing be iCloud or App store ID?
As i prepare to set up family sharing between my wife and i I find it seems to be more complex than I had expected. We each have an ID for iCloud, and for the iOS app store for a total of four ids. That system was forced on us by the way the system e
-
Another X79A-GD65 (8D) Problem
My board will post with two sticks of memory in the first two black slots. Adding another to third slot it will not post and has a error code 67. It also restarts and does the same thing in a continuous loop. My memory sticks are fine since they all
-
OCCI - getString() fails in subsequent calls
while (rs->next()) cout << << rs->getString(1) ; //name string How can I solve it? Thanks in advance.
-
Environment: XE 10g, WinXP SP2 As described in another thread, I'm trying to get a PHP application to run against an Oracle database. In that application it tries to run a few CREATE TYPE statements. Those statements are failing with "ORA-24344: succ