ITunes had deleted songs after recent update

Recently updated cloud and iTunes software and now songs that have recently been purchased before the update are no longer in playlists or in my music library. Any suggestions people?

Take a look at this Apple doc -> iTunes: Finding lost media and downloads
If that doesn't help, try redownloading the tracks from the iTunes Store.

Similar Messages

  • ITunes 11.2 crashes after recent update

    I have iTunes 11 for Windows 7, after the most recent update I beleive, iTunes will now crash everytime I luanch it. When I fire up iTunes, it'll load my library then 15 seconds later iTunes will stop working and close out. I get no error message. Need help to fix this issue.
    Thanks

    Scott, that's a fair question!  I incrementally made those adjustments over about 8 or 10 attempts as iTunes would crash not long after starting up.
    When I would turn on iTunes, I could see on the "home page screen" that is was updating Genius and somehow I also noticed it was syncing or downloading Podcasts.  I had already deleted the Sync Services Folder and emptied the trash, yet it kept crashing.   I also would try and "x" out the Genius progress bar to stop it, but not long after it would crash.  So on another attempt, I started trying to "turn off" Genius via to the Store pull down menu .  It would appear to turn off, but by then iTunes would crash.   And when I restarted iTunes I would see Genius try to update or sync all over again, whatever it does, and I would check the Store pull down menu and Genius was still on. 
    The next thing I tried was after turning Genius off, I shut down iTunes, hoping to "Save" the setting as off.  I think that was how I succeeded in shutting off Genius.
    In a mix of adjustments I also turned off what I could with the Podcasts.
    It's been six hours now with no crashes, and I played a big high def movie file via ethernet out of my Mac Pro to Apple TV, so my iTunes 11.2.1 is basically in good shape.
    Good luck to everyone.

  • Itunes won't open after recent update

    I just updated my Itunes to the newest version for my mac which is under the operating system version 10.6.8 and now it will not open. Any suggestions?

    Try tunring your hole device off. If this does not help I would take it back to the store you got it from and ask. Hope this helped

  • ITunes Used to Work, After Recent Update, itl file error

    I have 2 huge need questions to be answered.
    1. First off, my iTunes worked great. Never was anything wrong, went online at my work and downloaded the lastest update to a cd. Brought the cd home and installed it onto my computer. Then I click on the iTunes Program Logo and error: "..itl file cannot be found/created...default located..My Music Folder.." So maybe I moved it, nope there is the itl file right there. Next I descided well maybe I installed it wrong. So I uninstalled it and reinstalled it and the problem still occured. I have check everywhere for my problem, and yes I have found some people who have come accross it. I still don't know whats wrong. Please, if you know anything list me the things I need to do.
    2. Second off, my iTunes and computer has never Registered an iPod connect to the computer. All it reads is a iPod Camera in the USB directory. (I own the iPod Touch). How do I get this to work as well.
    Thank You,
    I hope someone can HELP!

    BUMP! Please Help!

  • Had a problem after download updated itune, error 7 (window error 126) cant open itune at all

    Had a problem after download updated itune, it failed as Error code MSVCR80 and then next message is error 7 (window error 126), cant open itune at all

    Had a problem after download updated itune, it failed as Error code MSVCR80 and then next message is error 7 (window error 126), cant open itune at all

  • ITunes Match deleted songs from my hard drive. I had to re-rip them. How can I stop this from happening?

    iTunes Match deleted songs from my hard drive. How can I prevent this from happening if I try it again?

    iTunes Match can in no way be considered a backup service, this is due to the inexact nature of the 'matching process' (see https://discussions.apple.com/docs/DOC-4112, for more detail).
    Loss of files from a Disk is certainly possible through media failure.  However, the extent of iTunes Match capacity is solely to influence the content of the cloud.  Perhaps there was a coincident, or pre-existing, failure of the disk which was simply exposed by the iTunes Match interrogation of the disk content.
    There are certainly other services which depending upon your goal may work well.  For example, Google Play with gBeats IOS App works very well.  My use of Match is to synchronise across several computers and to drive Apple TV and an IOS device - other IOS devices still use sync for specific music and are complimented by gBeats for access to the full library when local mobile signal strength is high.
    The strong advice to always start with a secure backup remains but if your primary concern is iTunes Match interfering with physical disk content you can relax - it simply does not have this ability.  (Apology to Sherlock, further investigation required).

  • HT3775 Quicktime no longer plays wmv files after recent update

    after recent update, quicktime will not open wmv files. had no problem opening them up in the past. reinstalled flip4mac codec and nothing. don't want to use quicklime player 7 b/c need to use fast forward option that will not work with QT7. Any help is appreciated.
    thank you,
    Damian

    I ended up on the phone with an Apple iPhoto expert after scheduling an appointment online (go to Apple support). He spent an hour or so diagnosing my particular problem and was able to fix it. I can once again view all my mov files in iPhoto. Since every computer is different, you might want to try that route. He was able to view my computer screen and direct me to do different things.

  • My iTunes won't open after last update.

    My iTunes won't open after last update. Can anybody help me?

    I had similar problem this time and last time when I upgrade/update iTune, and subsequently solved the problem through the help of this person. You may give it a try and see if this works for you. It works for me now and then. Good luck.
    https://discussions.apple.com/thread/3800524
    Oliver

  • HT2693 My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back. Can I get the update out somehow? Thanks

    My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks

    "UPAD lite?"
    I expect that you mean some version of iPad.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Cannot sign in Acrobat XI after recent update

    After recent update, cannot sign in Acrobat XI even after changing enhanced security settings

    To get iMessage and Facetime working you have to goto "settings > General> reset > erase all content and settings"
    After iphone reboots go thru setup like a new phone but chose restore from iCloud backup. Choose "see all backups" and chose one before you installed ios7.
    Usually iPhone backs itself up when locked and plugged into charger so there should be a few to choose from.
    The phone doesn't have to be pluuged into iTunes for this but probably should be connected to charger.
    Don't wait on Apple. They seem to think there is no problem.

  • Firefox loads, but wont load any web pages. tabs say "untitled". page is blank below. uninstaled and reinstaled no change. problem came after recent update. any help?

    firefox opens, but wont load any web pages. tabs say "untitled". page is blank below. uninstaled and reinstaled- no change. problem came after recent update. any help?
    ps. IE works as usual

    Problem solved from prior post. Firefox had become blocked somehow by McAfee firewall. Set to full access. Now works perfectly.

  • Apple TV2 can't find my network connection after recent update?

    Why can't my Apple TV2 can't find my network connection after recent update?

    I had to update the software on my Airport Extreme then reset my apple tv and that resolved the issue for me.

  • Months ago I tried to uninstall itunes from Windows 7 after an update failed. I couldn't do it because two files, ShellStreams.resources and ShellStreams.dll were in use. Any suggestions, please?

    Months ago I tried to uninstall itunes from Windows 7 after an update failed. I couldn't complete it because two files (ShellStreams.resources and ShellStreams.dll ) were in use. I'm ready to try again. Any Suggestions, please.

    See Troubleshooting issues with iTunes for Windows updates for tips on repairing the iTunes installation. One of the tools mentioned there, Unlocker, should be able to force delete the files that you are having trouble removing.
    tt2

  • ITunes won't open after OS update to Yosmite

    ITunes won't open after OS update, ITunes has been updated, it won't open or bounce. It will not allow me to move it to trash or reinstall it. I have already updated to OS X Yosmite two times as directed by apple, I have rebooted in safe made as well as Command/Option/P/R before start up. I have opened console/system log to see if there is anything going on but when I click on Itunes nothing happens, not even so much as half a line of script. I'm stumped. If I wanted someone to tell me to turn it off and on again I'd just watch IT Crowd. please help

    Thank you for using the Apple Support Communities
    If you head into your applications folder and locate iTunes. Right click iTunes and show package contents. In there there will be a contents folder --> MacOS --> double click on the iTunes terminal icon. This should force iTunes to open via a terminal window and at the very least it will tell you what it is getting stuck on.

  • Premiere Pro Windows crashing after recent updates

    Machine specs:  HP Z820 - zeon e5-2690 48gb ram quadro k5000.  Since the recent updates & complete wipe of the system & fresh install, Premiere pro CC crashes regularly without any pattern.  Using MXF files while editing if that helps-i did read a thread about that - but it was old.  This is a new problem.  The event viewer information: 
    Faulting application name: Adobe Premiere Pro.exe, version: 8.1.0.81, time stamp: 0x5426694c
    Faulting module name: mc_dec_mp2v.dll_unloaded, version: 0.0.0.0, time stamp: 0x53f72b76
    Exception code: 0xc0000005
    Fault offset: 0x000007feea381a30
    Faulting process id: 0x2168
    Faulting application start time: 0x01cfe7cdce8c2c97
    Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\Adobe Premiere Pro.exe
    Faulting module path: mc_dec_mp2v.dll
    Report Id: ba9aeb2b-53c1-11e4-b3dd-24be05e2e6a2
    Audition has also started crashing as well.  Info:
    Faulting application name: Adobe Audition CC.exe, version: 7.1.0.119, time stamp: 0x5421531b
    Faulting module name: MSVCR110.dll, version: 11.0.51106.1, time stamp: 0x5098826e
    Exception code: 0xc0000005
    Fault offset: 0x000000000003c780
    Faulting process id: 0x249c
    Faulting application start time: 0x01cfe7ebfe3ea9e0
    Faulting application path: C:\Program Files\Adobe\Adobe Audition CC 2014\Adobe Audition CC.exe
    Faulting module path: C:\Windows\system32\MSVCR110.dll
    Report Id: 4d975a0f-53e3-11e4-b3dd-24be05e2e6a2
    Any Ideas?

    Re:
    Premiere Pro Windows crashing after recent updates
    Try finding  MSVCR110.dll  file on internet and replace it in the path C:\Windows\system32\MSVCR110.dll
    hopefully it works...

Maybe you are looking for

  • JDK 1.5 compilation error !!!

    Hi all, My source code looks like this: * Test.java * Created on November 9, 2004, 6:20 PM package test; * @author Administrator public class Test /** Creates a new instance of Test */ public Test() * @param args the command line arguments public sta

  • Oracle Synonym is not available in IDT 4.1

    Hello Friends, I am working on a universe using IDT 4.1. I have created a db connection (based on Oracle 11g -> Oracle Client driver) and have used SSO authentication which is working fine. I see the list of tables and views under a schema but public

  • Local host give errors 403

    I have a local host set up using XAMPP. Until recently this worked fine. Now, when I try to access files using http://local host, I get error 403 Forbidden. == URL of affected sites == http://

  • Gen_bridge_metadata & CUDA

    Hi, I recently switched to OSX and as a pythoneer, I'm amazed to what extent Python is supported on OSX. Thanks so much for that, keep it coming. I'm interested to see if I can generate a ScriptingBridge to the CUDA libs. Thing is that CUDA doesnt ha

  • Equium P200-1ED shows on startup a PCI conflict

    My Laptop shows on startup a PCI conflict and sometimes it will not startup, when starting windows it shows the progress bar but after that a blank screen