Itunes has stopped working after installing the latest version

I have just downloaded the latest version of iTunes. Not only will iTunes not open, it seems to have affected other programmes on my computer. Can anyone advise, please?

Hello judithfromtutbury,
The article linked below details some useful steps that can help resolve install issues with iTunes.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Cheers,
Allen

Similar Messages

ITunes has stopped working after upgrading to latest version.......

I recently upgraded my iTunes software but ever since I did that, I keep getting an error message that says, "iTunes has stopped working". I have included the info from the error. I am using Windows 7 64-Bit. I hope someone can help me with this. I miss my iTunes.
Problem signature:
Problem Event Name: BEX
Application Name: iTunes.exe
Application Version: 10.2.0.34
Application Timestamp: 4d6dd34e
Fault Module Name: icuuc40.dll
Fault Module Version: 4.0.0.3207
Fault Module Timestamp: 4d3b6a8e
Exception Offset: 00073335
Exception Code: c0000409
Exception Data: 00000000
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional Information 1: e043
Additional Information 2: e0436f8e95924b8cc03f3b6e8fbccbe6
Additional Information 3: 3521
Additional Information 4: 352153d1c7a000354229557e718745c3
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Hi and welcome to Apple Discussions, KLH.
There are a few threads discussing this issue, including this one -> http://discussions.apple.com/thread.jspa?threadID=2771714
That thread and a few others mention downloading the DLL from another site. Heres a direct link to the workaround/fix -> http://discussions.apple.com/messageview.jspa?messageID=13162938&stqc=true
Also, there was a few posts asking what time zone people are in. What timezone are you in and is the computer updated?
WTH.

After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found. how do I get Itunes to start working again?

After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found. how do I get Itunes to start working again?

See... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562

TS1717 I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

Hi pholewinski!
I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks for using the Apple Support Communities. Have a good one!
-Braden

ITunes has stopped working: (Aproblem caused the program to stop...

After I installed the the 64 bit I-Tune for widows 8, iTunes is crashing and I am getting the following message: iTunes has stopped working: (Aproblem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available). Please advise on how to solve this problem.

Hi CCGoldwing,
Thanks for using Apple Support Communities. This article has steps you can take if iTunes is unexpectedly quitting:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Cheers,
- Ari

WiFi stops working after install of latest 10.8.5 update on MacBook 5,1 third time reinstall OS X

WiFi stops working after install of latest 10.8.5 update on MacBook 5,1 third time reinstall OS.
MB used as email and surfing tool when on vacation. Worked fine for months. Installed the latest security patch (update) and WiFi quit working. Two days later (still on vacation) WiFi started working again and worked fine for the next 2 days.
Came home and formatted and reinstalled 10.8.5 and all was fine again. We are selling the MacBook and setup new user, everything worked fine.
The update came up again so I decided to install it and WiFi instantly stopped working after the restart.
Does anybody have any idea what is happening.
Thanks

Not really, although WiFi has been a longstanding problem for lots of people. I fix for some breaks others.
However, if you are trying to sell it, you need to revert it back to the OS that shipped with it. You cannot sell your copy of Mountain Lion with the Mac. It is only licensed to you.
You also need to include the system disks that came with the Mac. If it came with Leopard (10.5), and you have a Snow Leopard (10.6) disk, you can install that if you provide that disk also.

"itunes has stopped working" after connecting ipad mini to computer Windows 7

itunes can play 2 out of 10 movies already on my computer. Otherwise, when I start to play the other movies, I get the notice itunes has stopped working etc.
Quicktime Player VERSION 7.7.4 can get to the Apple Store and order a movie. But when I insert my Ipad mini, itunes IMMEDIATELY "itunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
I reinstalled lastest itunes 11.1.3 after uninstalling it, and placed it not on the C Drive, which is pretty full but on another drive. I use ImTooiTransferPlatinum to put muisc onto my ipad mini, not itunes.

also when I open itunes in safemode (using shift+ctrl), it works normally...

When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?

When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?

Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

After installing the latest version of iTunes , I can no longer export files from EZ Vinyl Converter to iTunes. I tried restoring an older version which accepted these files, but that version no longer will open my library. I have been archiving my albums

After installing the latest version of iTunes, I can no longer export music files converted by EZ Vinyl Conversion software to iTunes, which is the only export option available in the software. I have been converting my vinyl records, tapes and cd's to MP3 files in iTunes for about a year now, and have well over 1000 man-hours invested in this effort. I tried restoring the last version of iTunes, but it will no longer read my library, as, apparently, the new version modified the library file(s) in some way. I want to reenable this export-import function to finish my archival. What is necessary ???

Apparently, security programs like Macafee and Norton view Itunes updates as new programs and block then from access. If you add Itunes to the list of exemptions, it solves the problem.

How do I sync my 3rd gen ipod touch after installing the latest version of itunes?

How do I sync my 3rd gen ipod touch after installing the latest version of itunes?

Correction: Thank you FoxFifth for the good information. I did find this information earlier before landing here in the support community. I have come to the end and I am uncertain about trying to reset my I-pod touch to the factory settings. I was satisfied with the older version of i-tunes. Can someone direct me how to downgrade i-tunes perhaps?

HT4972 my computer will not recognise my iphone after installing the latest version of itunes any ideas how to rectify this

my computer will not recognise my iphone after installing the latest version of itunes any ideas how to fix this

iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X - http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows - http://support.apple.com/kb/TS1538

HT1414 after installing the latest version of IOS my iPhone 4s rapidly runs out of power, it also suddently (fully charged) shuts down and restarts without me asking for it. I tried to reinstall the latest version of IOS but it doesnt help. Any advice?

After installing the latest version of IOS my iPhone 4s rapidly runs out of power, it also suddently (fully charged) shuts down and restarts without me asking for it. I tried to reinstall the latest version of IOS but it doesnt help. Any advice?

Backup and restore your software via iTunes. If the problem continues, restore as a NEW device. If this solves it, that means there is some corruption in your backup file. If the problem is still there, you should take it to the Genius Bar at an Apple Store for evaluation.

The forward, back, refresh, and stop buttons are not working. Even after installing the latest version. Anyone else having this issue?

The forward, back, refresh, and stop buttons are not working. Even after installing the latest Firefox update. Also my home page stopped loading upon startup even tho I have it setup to do so. Anyone else experiencing these issues? This is my second request for help and of course, Firefox on-line support is always closed.

Those are all symptoms of a problem with the places.sqlite file, for details see http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

HP Power Advisor has stopped working after installing latest updates

I have been using HP Power Advisor successfully on my Lenovo X230 running Windows 7. After installing the latest Power Advisor updates it no longer works. I can select a voltage from the dropdown on the Input Voltage screen but nothing happens when I click on the Go button, as if it is disabled. I've tried re-installing the download package which works fine but it stops working again as soon as I install the latest updates. Any ideas how to solve this?

Well on the website for HP power Advisor, it specifically says,
"Accurately estimate power consumption of your HP server and storage products"
There could be many different things interrupting your use of the program, but I'm going to say that maybe your largest problem with using the HP software designed for HP machines is your Lenovo.
Sorry,
Good Luck!
Did I help you? Please give me a Thumbs up to help let others know!

"itunes has stopped working" after downloading album artwork??

For years I've avoided ipod and itunes like the plague...but about 2 weeks ago I gave in. I got an ipod touch and installed itunes. Everything was fine - until this afternoon when I clicked on find album artwork in itunes. After itunes finished going through the process of finding the artwork ( 1400 of 1600 files found, 1450 of 1600 found, etc...or something like that ), i got the error message that *itunes has stopped working*. I've been searching forums all night and tried uninstalling eveything "apple" and reinstalling. Apparently this error comes up for A LOT of people ( problems like this are why I never wanted an ipod... ). None of the recommended fixes are working. I'm assuming something went wrong during artwork downloading????? Or not? I don't really care why actually, but, if itunes crashes every time i hook up my ipod, what good is it ( or the ipod )...and i don't know what to do with the ipod ( how to download apps, or add music, photos and videos ) w/o the itunes. My previous media players were all drag and drop ease.
I'm a newbie - and i'm rally frustrated - so please be kind. Can anyone tell me - in plain terms - how to get my itunes to not "stop working" every time i hook up my ipod?? Please?
THANKS.

OK, so after looking everywhere for an answer - with no luck - I figured it out on my own ( don't ask me how... ). I'll tell you what I did. I bet you have the same problem. Honestly, I thought I'd be returning the **** thing, but it's fine now.
I'd plug in my ipod ( 32gtouch, like yours ), and itunes would open. Everything was fine until it started to sync my music. Then it would freeze, give me the error message, and then shut down. I did this probably 10 times throughout the day, and always the same. Then I noticed it always froze at the same place during the sync. Soooo, I finally realized I must have a corrupt file.
Step 1: Do as I did, but when it starts to freeze, take note of the name of the song it freezes on. That's probably the culprit .Remember it. Let the error message come up and close as always...
Step 2: Open itunes again! Click on your ipod, and then on the music tab. Immediately un-check "Sync music" ( top of the page ) and then click "apply" ( bottom right ). DO THAT FAST...before it has a chance to sync, or it will just freeze again!
Step 3: Go into your music library on itunes, and DLETE/REMOVE that song.
Step 4: Close itunes.
Step 5: Open itunes, and go again to your ipod, and click on music tab. This time, check the "sync music" box ( and apply ).
That should fix it. If it doesn't you have more than one corrupt file. In that case, close itunes and then open it again. Follow step 1 and 2 again. Remove any songs from your library that aren't that important to you ( especially those that were from questionable sources... ). Basically, you need to figure out which song ( or songs ) are causing the problem. If you just delete them all, you'd have to add them again one at a time to avoid the problem again, and that would be a pain. So, just remove as many as you feel like ( out of 1500 songs or so, I removed a couple hundred ). I left mainly the ones that were from my actual CDs or that I had bought through Amazon ( or other legit source ). I removed most of my Limewire downloads. Most of them are probably fine, but I'll add them later one at a time to be sure...
I still have plenty of Limewire songs on there, and they are fine, but, as you know, you do get bad files sometimes.
Anyways, once I did this, everything is fine and works great. I even started adding album art manually, and at one point it froze again. So, I did steps 1 and 2 again, and removed the album art I last added, and then synced again, and it was fine. Usually, the album art I add is OK, but I had that one pesky photo I guess ). So, I guess the thing is after you get the majority of your music on, just add and adjust things a little at a time, and you'll always know which file is causing you problems ( hopefully no files will!! ).
I hope this works for you. Let me know if you have any questions, and let me know if it solves your issue too!
Peace.
-***

Itunes has stopped working after installing the latest version

Similar Messages

Maybe you are looking for