ITunes has stopped working and has to close message on Win 7
When I plug my phone into the computer iTunes starts to open and then I get an error message that states iTunes has stopped working and has to close. This seems to only happen while at work and not at home
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
tt2
Similar Messages
-
I just updated iTunes on my dell and now when I try to go to the store I get an error message that iTunes has stopped working and the program closes. Ideas?
I have also retarted twice...
-
When I sync my phone it gets to step 6 the does not complete the sync i get a message that says itunes has stopped working and needs to close anyone else have this issue
The same problem here!... My itunes stucks on "preparing to sync" when sync my ipad 2, and stucks on iphone 4 calendar sync...
Any solution?? Need help, please!!
Macbook pro 13 i7
Iphone 4
Ipad 2
Thanks!!! -
While syncing my I phone it gets to step six "optimizing " and gets almost to the end and I get a message that itunes has stopped working and has to close. It get to like 1074 of 1138 items to optimize when iTunes quits. Any suggestions on how to fix this?
Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users.. -
99 or 100% when it says Premiere Pro has stopped working and needs to close. What's going on?
I am using the premiere pro trial at the moment and have been trying to render a video for a solid week now. My computer is far more powerful then the recommended specs and yet it still takes 2 hours to attempt to export a 3 minute video (that isn't even heavily edited) and not only that but it will get to 99 or 100% when it says Premiere Pro has stopped working and needs to close. I have used earlier versions of the product before and never had such problems, even my 2 year old laptop could breeze exporting. What's going on?
Thanks, I'm a bit new to asking for help!
Version : Premiere Pro CC 2014.2 (8.2)
It is up to date
I'm using Windows 8.1 build 9600
My sources are contained in .mov, .mp4 and .png. The codec I'm trying to use is H.264
After I set the project to export I got this error message every time it gets to either '99' or '100%' completed. "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"
I have never had such a problem with the program which makes me think it might have something to do with a recent update.
No other notable software was running during the export.
I don't have any third-party effects or codecs installed.
I have 64 bit OS and processor, Intel i5 - 4670K quad core clocked at 3.40 GHz. 12 GB of RAM. And a GTX 770 with 2GB of video RAM.
Unless it was installed in the trial, I do not have the Mercury Playback Engine.
And finally, it can be noticeably choppy during the preview when it gets to the part I don't have rendered but is fine again for a bit if I replay those parts. A part from being a bit slower then usual, I didn't actually run into a major problem until I started exporting.
Thank you for the help! Any suggestions? -
"Killapps.exe has stopped working and has been closed&qu
My card was working fine until i tried to update my drivers today. Now, no matter what version driver I attempt to install I get the error message "Killap
ps.
exe has stopped working and has been closed." when it begins to install the drivers. I've attempted the beta driver, the latest stable driver, and even installing the drivers off the disk. I even tried using system restore to go back to before I attempted my first update today, only to have system restore fail!? I have an X-Fi Fatalty Champion card, and am running Vista Ultimate 32 bit. Now that this has occured, I'm stuck without sound. Before you even ask, yes, I'm using the disk labled for vista that came with my card. Window's built in sound drivers (which worked when i first plugged in the card before I even installed the software a few months ago), dont even attempt to kick in. Help? Please?!I was having the same problem. Earlier in the week, I was able to drag a few photos to the upload folder and they synced correctly. Yesteday, I dragged different photos, and I got the "applephotostream.exe has stopped working" error.
The solution - for me, at least! - was to reduce the size of the pictures being uploaded to the photostream. While all of the pictures were jpegs, the first set were ca. 800K (3800 x 2500), and the second set were ca. 2.5 MB (4000 x 2000). When I reduced the resolution of the last set by a factor of 4 (ca. 600 K, 2000 x 1500), they uploaded without a hitch.
Based on this admittedly sketchy experiment, it looks like Apple has a max picture size limit, apparently based on file size rather than picture resolution). Perhaps < 1 MB? To be rigorous, I should complete the experiment - leave the resolution of the second set of pictures alone and reduce file size by reducing jpeg quality.
Has anyone heard about a picture file size limit? -
I keep getting a pop up on Itunes when I try to add a file saying that ITUNES HAS STOPPED WORKING AN NEEDS TO CLOSE. W indows will notify me when corrected. iuninstalled and reinstalled 3 times to no avail. how do i fix?
a further message box states that Data Execution Prevention has closed the program.
Try updating your QuickTime to the most recent version. Does that clear up the DEP errors in iTunes? -
Indesign cs6 has stopped working and needs to close in windows 8
We have Adobe InDesign CS6 installed on 2 different computers and on both computers it frequently crashes saying "cs6 has stopped working" and closes the application. Restarting it ok for a while and then the same thing happens. We have uninstalled and reinstalled to no avail, no other Adobe products are installed.
Try trashing the prefs. See Replace Your Preferences
-
I have iPad 2, iPhone 5s, both with iOS 7.1.2. I use PC with Windows 7 and hard wire internet service and iTunes to update apple products; no wi-fi. I updated iTunes to v11.4 on 09/11/14. I ran Windows update on 09/10/14. I did not try to open iTunes on my PC until yesterday 09/16/14. I got the message: "iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." I got the same message today. Does anyone know if this is a Windows problem and if a solution is coming or an iTunes problem? I can get iTunes on iPad and iPhone. All other programs PC are working correctly. I use Norton Internet Service on PC. I ran virus scans and repair/reinstall iTunes yesterday on PC.
Hello notime4,
The article linked below details some useful troubleshooting steps that can help stabilize iTunes on your computer.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen -
My itunes has stopped working out of nowhere. When I open iTunes a message appears stating "iTunes has stopped working." and windows closes iTunes sayng it will look for a solution. I have Windows 8.1 64-Bit and have been using iTunes 11.1 (or the newest one out there). I have un-installed and re-installed multiple times. The same message continues to pop up.
Hi biazonmg,
Thanks for using Apple Support Communities. If iTunes is unexpectedly quitting when you open it, this article has steps to isolate and troubleshoot that:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Cheers,
- Ari -
HP G4050 "HP Scan Resources has stopped working" and the program closes
Scanning photo negatives, and all was working well until I updated the HP software.
RUnning on an HP laptop, 64 bit, Win 8.1 64 bit, most current version of scanner software (is there no way on the software to find the version no.? I deleted the download after installing)
Have rebooted the machine. Closed the scanner, turned off/on, reinstalled software and all combinations of these three.
load the negs. preview. rotate, crop, click "finish". It scans the first neg, gets 95% of the way (according to the work bar progress), throws up a message:
"HP Scan Resources has stopped working" Close the program. On the close screen it suggests the above 3 retrys, and gives the "extended error info" as :
8,[(4,0,-2147023170)] I presume that may mean something to someone.
Am about 1/2 way through scanning 5,000 negatives, and this has cropped up. Bizarre, as the laptop has not changed from the get-go (new HP laptop). WhaddaIdo?Hello WRJP, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are running into scan issues. I would like to help.
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
The download and install processes seemed to work OK
The first Firefox window opened suggesting I update Adobe Flash Player. Clicking on download (with AV s/w either on or off made no diference) produced the Windows message that Firefox had stopped working.
By-passing the Adobe download suggestion and attempting to open up my home page (Google) produced the same result.
In fact any attempt to do anything, i.e. hitting the Enter key or left-clicking the mouse, produced the same result. Firefox freezes and WIndows then closes it.Try to update Windows Vista Service Pack 2 using Windows Update, then select all high-priority or important updates, install them and restart the computer. Run Firefox. If it works fine then OK or if it crashes then there was no problem with the operating system.
The second method is restart your PC, after the manufacturer logo appears and before "Microsoft Corporation(C)" progress bar appears press F8 key. you will be presented with a menu with options-
Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
etc. select "Safe Mode with Networking , and then login to your user account. Run Firefox again. If it works normally, then that probably means that your PC was infected prior to installing Firefox. Update your existing antivirus and run a full scan or acquire free Antivirus like Avast Free Antivirus etc.
If it still crashes, then try re-installing NOT Repairing Firefox AFTER INSTALLING AN UPDATED ANTIVIRUS .
OK the last way, better uninstall Firefox 3.6 and install Firefox 4 Beta 7. Firefox 4 Beta 7 runs 3 times faster than Firefox 3.6, with an overall improved interface. -
"Power Manager has stopped working and needs to close"
I have been getting this message which I think started when I installed my Vista Service Pack 2. I have updated everything and my Bios is up to date. Does anybody have a solution to this error?
Try trashing the prefs. See Replace Your Preferences
-
Can anyone help please?
You need to look at what is the cause what module is the fault in.
-
Has any found a resolution for this problem?
wittsjk wrote:
Can I use this external drive with another one? Or do I get rid of this one and just purchase one that is twice as big as the internal drive?
I would reccommend buying another one. You need your Time Machine backups in one folder. You can always use the older one for backing up media etc,
Cheers
Pete
Maybe you are looking for
-
Report Generation Toolkit: Page Numbering
When creating a Word Report using the Report Generation Toolkit, I am using the Word Set Page Numbering.vi to display the page numbers in the footer of each page of the report. This works fine when the include page x of n switch is turned OFF. Howeve
-
Hi All, Does anyone know the Table for User Parameter IDs? Thanks in Advance
-
Okay, so I have a .MAC account, build at work then want to finish later?
How do I do this? i.e. I publish a few things from the work MAC PRO then I want to work on it at home! How do I do that? d/l from .MAC to laptop and contiue working on? Possible? Thanks
-
Hello all, I have almost did it :D I followed the instructions of rittman mead --> http://www.rittmanmead.com/2010/12/oracle-bi-ee-11g-styles-skins-custom-xml-messages/ But the last step is missing :/ I have a folder with sk_pageaccuei, s_pageaccueil
-
Hello, In CS2 File-Info I have a history containing Description and Keywords I fill for each edited photo. This is useful in similar images, I only have to select the appropriate description from the history. Same as keywords, I only have to make mi