Itunes has stopped working?? HELP ME!
I have been getting the error message "itunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." everytime I try to open itunes. It doesn't open at all, just gives me this message. I've uninstalled and reinstalled over and over and over, 3 times today! Each time trying to make sure that I uninstalled every little thing. I dont know what else to do! I'm using Vista. PLEASE HELP!
Hi whydoyouhatemeapple,
If you are having launch or unexpected quit issues with iTunes on your Windows machine, you may find the troubleshooting steps outlined in the following article helpful:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Regards,
- Brenden
Similar Messages
-
Need a bit of help ,computer keeps saying "itunes has stopped working " and then "a problem has caused prog to stop working etc" when i follow links nothing happens and the same info comes up.Please help.
This Apple article will help you isolate the problem a little -> iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
Does iTunes start in Safe Mode?
Open iTunes in Safe Mode to isolate any interfence with plug-ins or scrpits not manufactured by Apple.
Hold down the Shift and Control keys while opening iTunes. If performed correctly, you should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
After clicking Continue, determine whether the issue you were experiencing persists in Safe Mode.
It would also be helpful if you can provide the Error Report from the Windows Action Center Reliabilty History. To view this go to Control Panel > All Control Panel Items > Action Center > View Reliability History under Maintenance. Double click the iTunes critical event and copy it into your reply.
If you run into problems, see b noirs walkthrough in this thread -> Windows Apple Mobile Device -
Itunes "has stopped working" Help pls
About a month ago Itunes for some reason, as soon as i open it, just freezes and i get a itunes has stopped working error.
I've tried about everything that i have read in forums and in the apple support and nothing has helped me.
I'm using windows 7.Hello, jerrywise.
Thank you for visiting Apple Support Communities.
Experiencing issues such as this when connecting to the iTunes Store can be due to multiple causes and not always a simple fix. I would recommend going through each of the steps in the attached articles below. Be sure to test the results after processing each step.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/ts4123
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Cheers,
Jason H. -
Itunes has stopped working i have instaled 10.3 ,10.4
itunes has stopped working some one please help i have 10.5.1 version of itunes every time i connect my itouch an error message pops up itunes has stopped working help HELP HELP.
If and when I finally manage to open it, as soon as I click on a movie to watch, the message "itunes has stopped working" comes up.
Try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?
Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
ok i installed new iTunes version 10.3.1.55 and when i launch itunes it says 'iTunes has stopped working' i get to my problem history this is whay i found
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.3.1.55
Application Timestamp: 4deec351
Fault Module Name: MediaToolbox.dll
Fault Module Version: 1.0.694.7
Fault Module Timestamp: 4ddeb575
Exception Code: c0000005
Exception Offset: 00250000
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
PLEASE HELP ME!!!!Fault Module Name: MediaToolbox.dll
Fault Module Version: 1.0.694.7
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a window pops up saying that the prograam has encountered a problem and sh... -
I just received a refurbished iphone the the insurance provided by a major electronics retailer. Since i have tried to sync it to iTunes I have received "iTunes has stopped working" error. It says it will come back with possible solutions, but never does a thing. I have already removed and again installed iTunes, QuickTime, etc. to no success. Not sure what my next step should be.
This helped overcome the crash problem, but (as reported before), I still have to start iTunes in Safe Mode in order to watch any videos. This has been the case since 10.5.
The regular mode behavior has changed a bit - instead of the progress bar moving to the end of the video, showing no video but playing the audio for about three seconds, it now leaves the progress bar where it is ... but the rest of the behavior hasn't changed.
Windows 7 Professional, 64 bit on an HP dv8t quad-core laptop w/ 8 GB RAM, running nVidia GeForce 230M with 1 GB video RAM.
Thanks for your prompt response to the original problem posted above. At least now I'm back where I started from before I upgraded to 10.7. Not optimal, but I've finally gotten used to doing a Ctrl-Shift-click to run iTunes.
Scott -
I have recently bought a new laptop with windows 7 and when i have tried to install and open itunes i keep getting the message 'itunes has stopped working' itunes then shuts down before i can do anything to fix it. This happens every time I try to open itunes. I have tried uninstalling itunes and reinstalling it, starting itunes in safe mode. Nothing seems to work. Please can anyone help.
If and when I finally manage to open it, as soon as I click on a movie to watch, the message "itunes has stopped working" comes up.
Try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
TS3212 Why can't I find a help # to call about my problem "iTunes has stopped working"
"iTunes has stopped working"
Acer system, Windows 8, trying to download iTunes for Windows 8. Partial loads but at @ 75% stops. Worked with prior version of Windows transferred over.
Full message: "A problem caused the program to stop working correctly, Windows will close the program and notify you if a solution is available."
Troubleshooter didn't help, removing and down loading iTunes for Windows 8 did not work. same message each time.
Windows message says its an "incompatible program."
How do I get this to load correctly? AND HOW IN THE WORLD CAN I TALK TO SUPPORT ABOUT THIS PROBLEM, I HAVE SPENT 1/2 DAY TRYINGApple don't provide free telephone support for iTunes.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Please HELP, "iTunes has stopped working" error after connecting iPod video
People please help me out! I have a Razer Blade gaming laptop with Windows 8 64bit.
I have an iPhone 5, iPad 2 and an iPod video (80GB). I had some weeks from not connecting the iPod to my computer, but this morning that I did so I can upload some new music to it, iTunes just crash, I get the "iTunes has stopped working" error message when I connect the iPod video. I do not have this problem with either the iPhone 5 or the iPad 2, when I connect these, iTunes works fine, once I connect the iPod, then all goes down
Procedures that I already tried and that were unsuccessful to solve the problem:
Uninstall Quicktime
Uninstall iTunes and reinstall
Reset the iPod (several times)
Delete TEMP files on computer
Restart the computer (several times)
Use a different cable and a different USB port
The iPod is working fine, if I plug it to my car stereo or if I use it with headphones it works great, no problems nor errors. My computer also identify the iPod as a hard disk, no error messages from Windows, it is just the freakin' iTunes that freezes everytime that I plug the iPod
PLEASE HELP ME OUT, I've searched forums on this particular issue but with no luck.
Thanks very much!It is only when I attempt to add a song to my iPod once plugged in that I receive the error "Itunes has stopped working" and forces me to exit the program, without the song being successfully transferred.
Do you have the "Convert to 128 kbps AAC" preference enabled for syncing to the iPod, laur?
If so, it's quite plausible that you've got the iTunes 10.1.0.54 bug and we need to get you updated to 10.0.1.56 as per the following document:
[iTunes 10.1 for Windows: iTunes may stop working and need to quit while importing or syncing audio|http://support.apple.com/kb/TS3591] -
[Window Title]
Microsoft Windows
[Main Instruction]
iTunes has stopped working
[Content]
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
[Close program]
This is what I got... sorry, not very tech savvy to copy the error message onto here...
Have tried uninstalled and re-installed iTune, updated the new version of 10.6... many times over still not working!!!
I share the frustrations of many here. HELP!!!!!Hi there Nok Saensanoh,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
-Griff W. -
"iTunes has stopped working" - i need help! urgently :(
Hi, I am having a major problem with my iTunes program. Until about a week ago iTunes was working fine on my Vista Home Premium. One morning this week I got up and tried to turn it on and suddenly a box would pop up after about 10-20 secs after connecting my ipod touch to the computer saying "iTunes has stopped Working" Then another box would pop up saying that when a solution becomes available, it will notify me or something to that effect. Since then I have tried everything I possible could think of like reinstalling itunes and changing my msconfig settings. I have been on countless forums as well looking for someone who has my exact same problem and the solutions presented their are not working for my situation. If anyone could help me get iTunes back working on my system, that would be great. Thanks
I have exactly the same problem, please, if anyone can help, solution is well received.
Thanks. -
I just updated to iTunes 10.5 and now, I can't listen to music or watch a movie without the message "iTunes has stopped working" popping up. As soon as this happens, iTunes crashes completely. I'm running on Windows 7 - 64 bit. May I have some help please
If and when I finally manage to open it, as soon as I click on a movie to watch, the message "itunes has stopped working" comes up.
Try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
Hello everybody> my itunes has stopped working and the problem report stated the following:
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.5.3.3
Application Timestamp: 4f14cc3d
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7601.17514
Fault Module Timestamp: 4ce7b8f0
Exception Code: 80000003
Exception Offset: 0003381b
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
can anybody help me?Are you seeing a similar message when launching QuickTime Player?
What security software is installed on the computer? Have you tried testing in an admin account or after uninstalling tthe security software?
Use one of the following articles to guide you through removing iTunes and the related QuickTime files.
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
my itnues for pc is not working it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me
Please helppppp
-
I am getting itunes has stopped working, can anyone help
I am getting "itunes has stopped working"
This Apple article will help you isolate the problem a little -> iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
Does iTunes start in Safe Mode?
Open iTunes in Safe Mode to isolate any interfence with plug-ins or scrpits not manufactured by Apple.
Hold down the Shift and Control keys while opening iTunes. If performed correctly, you should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
After clicking Continue, determine whether the issue you were experiencing persists in Safe Mode.
It would also be helpful if you can provide the Error Report from the Windows Action Center Reliabilty History. To view this go to Control Panel > All Control Panel Items > Action Center > View Reliability History under Maintenance. Double click the iTunes critical event and copy it into your reply.
If you run into problems, see b noirs walkthrough in this thread -> Windows Apple Mobile Device
Maybe you are looking for
-
RemoteApps not working after upgrade from 8.0 to 8.4
Hi I hope someone can shed a little light on a problem that I can't seem to get to the bottom of. We have a 5510 ASA that was running 8.0 and were using it for clientless VPN access. Through this, we published bookmarks that linked to an internal Mic
-
How do I transfer files from my old computer (a Dell) to my new Mac?
Hi there. I just purchased a new Mac computer and am not sure how to transfer all of the information from my old Dell. I've tried searching for an answer on my computer but haven't had any luck. Can anyone help?
-
Could not resolve ms:script to a component implementation?
hi, i am new at flex and tried to see a working porject. tried the code given in the url below: http://learn.adobe.com/wiki/display/Flex/1b.+Code+Files But i am getting the error: "Could not resolve <mx:Script> to a component implementation." I asked
-
How to convert an ISO 8583 message format to XML and vice versa within OSB.
Hi Guys, Can anyone help me out with this problem. ISO8583 message is used in bank or financial institutes for card-originated transactions Example of an ISO8583 message: 02004200040000000002161234567890123456060 9173030123456789ABC100012345678901234
-
Really frustrated!!! Using SP 2010 with VS 2010. Created a simple project with just 1 elements.xml file for adding 2 columns. Scope of the feature is "Site". When I right click and deploy it gives below error. Error occurred in deployment step 'Activ